Hey guys,
Right, I've come over from symbian, namely UIQ and the SE P-series, so am used to things being somewhat different. The main issue I don't seem to be able to find a solution to is the screen locking problem.
Essentially, at the moment I push the power button to lock the device, as well as enter a power save mode. I have to say, I like the way that works. However, when I recieve a call (or text with the reg fix) the phone comes to life, great, but say I miss the call, or the phone is in my pocket, the screen is now ACTIVE. Not good news.
How am I supposed to lock this device properly? Screen lock and then the power button? Can't I get a simple tap on the power button to lock and power save the device?
Essentially, if I have a missed call or message I just want the phone to vibrate once, then keep an LED flashing intermittently. But I want the screen to stay LOCKED.
Any help would be much appreciated, and thanks for all the other useful tips on the forum!
Cheers,
Daz.
Go start/settings/System/Long Press End Key
Select automatically execute etc
and Lock device
then OK
then, a long press on the hang up button (bottom right) will lock the phone.
Hope that helps
Perhaps I didn't explain myself. I know how to lock the phone, but how do I make use of the power button tap mode? In other words, the power saving mode?
Can I set up a button that locks the phone, AND sends it to power save mode? (or "turn it off" as WM seems to call it).
Thanks again,
Daz.
I found a regedit in:
HKLM\Software\HTC\KeyLock\SameAsDeviceLock
Set it to 1, but it doesn't do the trick. In fact, it now causes the power button click to not lock the keys.
I suppose the only option is to have standby mode come on after a timeout, lock the device, then it will go into standby on its own. Seems like a slight waste of battery to me!
Cheers,
Daz.
I really want this to work too,
It should unlock and turn on when recieving a call, it should just turn on when recieving an sms (so you can have a quick look from who it is, and then unlock to reply)
and when you lock the device it should automatically turn off...
Not EXACTLY what you want, but S2U2 in the "Development and Hacking" section will improve matters for you.
When you turn the phone off with the power button, S2U2 kicks in. Then:
1) If you turn the phone back on, you'll get the slide to unlock screen.
2) If a call comes in, the phone turns on and you see the caller ID (with full screen picture, if you so desire) on a "slide to answer" screen. The S2U2 default settings ensure that the phone turns itself back off again if you fail to answer it.
3) If a text / e-mail / mms comes through, it notifies you but remains off... When you hit the power button, the "slide to unlock" screen will show missed calls, text messages, e-mails (and even the weather if you want...).
Check it out, it's an essential piece of software in my opinion... http://forum.xda-developers.com/showthread.php?t=381588
Thanks sub69, great recommendation. However, does anyone else get the bug when hitting the "x" in other applications to close them, the status bar (Or task bar) goes all scrambled and looks like the S2U2 status bar.
Shame this isn't built in though, would be nicer to see the TF3D interface rather than a 3rd party one.
Thanks again!
Daz.
Anyone with other suggestions? S2U2 is just a little too buggy at the moment on the diamond...
use "BatteryStatus" from www.chti-tai.info, they have a option for devicelock on wakeup, so even u missed a call, and the screen light up, it is still locked.
somone posted this on other thread.
--------------------------------------------------------------------------------
Now we don't need any devicelock software with diamond.
If you want automatic lock your diamond you have to change this registry key HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off automatically your device are locked
Sorry for may bad english but i'm italian.
Ciao
Thanks for that reg fix, seems like a good option. There was a new S2U2 version release, 1.5, and that seems to work well for me. Will see how that goes for now...
Cheers guys! Daz.
the reg edit is good, but it doesn't solve the problem of unlocked touchscreen prone to being pressed during incoming call (when scrambling in your pocket to take out the phone)
btw there are several other threads where this problem is addressed and deeply analyzed (without a complete working solution, however...)
dazbradbury take a look at sensorlock, if you have not already.
Related
Hello all,
I just got my AT&T Tilt and love it so far, except for one major annoyance. When I press the power button, the device will turn the screen back on after a few seconds to a few minutes. The problem is when it's in my pocket, it can accidentally call people. My 8125 and 8525 did not experience this issue.
Any suggestions?
Thanks!
Button lock
It sounds as though the phone isn't set to lock all buttons except the power button when it is in standby. This happened to me last time I re-flashed my Wizard, and I couldn't figure out for ages why my battery was draining so quickly as well!
Settings > Buttons > Lock
Hmm, not seeing any option under Buttons or Lock. I do remember this setting from WM5. It does appear, however, that the buttons are not turning the phone on, it's just waking up even if I leave it on a desk.
You can add lock to the home screen
first press and hold the hang-up button so that it locks. Then just push the power button once. This puts it in standby.
There is a idle timeout for going on standby mode, but I can't find a setting to auto-lock.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
Are you paired to a Bluetooth device? I see similar behavior in my 8525 when in my car - the BT car kit does stuff which "wakes" the 8525
Richard
Try this leaving Google Maps On the Screen
Hi Guys,
I get this behavior when I have Google Maps running. It will even cycle the screen on and off a couple times.
nope and nope. just sitting on the today screen.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
I have the very same problem.
However, my girlfriend whom I also bought a Tilt for, her's doesn't do it.
We've installed all the same software too, so I'm a little puzzled.
start>settings>system> key lock. set it to lock all buttons except power.
rzanology said:
start>settings>system> key lock. set it to lock all buttons except power.
Click to expand...
Click to collapse
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
JonRick said:
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
Click to expand...
Click to collapse
Any number of applications might be starting the device, from weather apps to calendar, diary, time sync etc etc. For example, HTCs weather app will do it depending on how often you have it set to another example I came across from someone was TREO ALERTS that contains a script "refresh.mscr" and it was set up refresh time 30 seconds (this was turning his TyTn II on by itself).
Mike
hard reset and try again.
i'm betting that none of these suggestions were helpful (except the one about some application generating a wakeup event without any other visual notifications).
i was having the same problem, but i just tried to narrow down which running program was causing the events. it's one of:
* wireless manager
* messaging
* IM
my guess is IM; i'm going to test that out in a second.
well, it's none of the above. still seems to wake up randomly anywhere from 15 seconds to several minutes.
seems to happen more frequently when it's just been turned off.
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
dscline said:
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
Click to expand...
Click to collapse
i'm fine with using the lock function, but it still turns on randomly, using battery, and eventually unnecessarily yellowing the screen from backlight aging. my next approach is to check out the notification queue, using a notification cleaner app.
So i am having a similar problem. When i press the power button, the phone's screen turns off but when the keyboard slides, it turns back on... is there a way to make it so the keyboard sliding does not turn on the device? I think the keyboard slides around a little when in my pocket and i hate pushing 3 buttons to unlock my phone... thanks
I was having the same problem.
This is an issue with the ATT rom. Flash over HTC rom and you will be all set.
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the TyTn II):
http://forum.xda-developers.com/showthread.php?t=341419
Well I've had my Tilt for a week now and I have been frustrated completely with the Phone App.
First of all, when I am calling a tone prompted location where you have to press the keys to get somewhere (611, corporate voicemail, etc), some of the time the phone will go into "hold" when i press the keys.
Secondly, after a call that i have pressed the keys for tone operation, the phone app will not completely close. the screen will stay half dim and the start bar and task panes are locked out. i can't access any of the icons at the top of the screen. the only button available is the task manager which shows no programs running.
i can pretty much replicate the 2nd problem consistently. does anyone else have this problem? Please try to call into a company say even 611, go through all the tone prompts and see if the phone app closes appropriately afterwards. make sure you are on the phone long enough for the screen to automatically dim.
the only way for me to get past this is to softboot so i can get access to the start menu again. but i'd rather not have to softboot after every phone call =T
Thanks!
Same problem here, any help would be great.
Massiv
disable the lock thing where you have to enter a pin - i think its a bug in the rom
Same problem - but if press the on/off button for the screen twice I do have again access to all icons. Not nice but ....
yeah i was messing around with the phone last night and realized that it has to do with phone lock and figured out if you press the power button to put it to sleep and press it again to wake it up, everything is normal again. it was just a fluke how i found out but i'm glad to know that this isn't only my problem. i was about to do another hard reset on the phone.
i called ATT techsupport and they told me it might be the simcard. can other Tilt owners chime in here. is this a ROM problem or could it be related to a faulty sim?
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2
Sorry if this has been discussed already, but is there a way to disable the Start Menu, and for that matter EVERYTHING but the dialpad while on the phone? I used KaiserTweak to keep my phone awake, but now everytime i go to use the dialpad while im on the phone, my ear has managed to open the start menu or some program and its very annoying .
TIA
I just knock the power button to disable the screen - then flick it on again if I need to tap keys.
I tried this but it doesnt really work. The phone seems to turn itself back on at some point during the call, and then when i go to hang up or use the keypad, i have google maps or some other app opened up. Major pain in the butt. If someone has a way to make the dialer app "always on top" or disable the start menu and/or taskbar when the dialer is open, that would be awesome for me.
by default, the screen is suppose to shut off after a few seconds while you are on a call. Have you made a reg hack to change this? or are you suing a cooked ROM? Most cooks will turn off this feature. Also, it's the first option in Kasier Tweak.
i've tried with it on and off. The problem seems to be that if you hit the wheel on the side (to adjust the volume) the screen turns back on...so if you want to adjust the volume, you have to pull the phone away from your face first, and then hit the power button again when you're done.
I find this rather annoying, but don't know how to adjust it.
When making a call, sometimes you have to press through prompts like, 1, 2 , 3 etc. But after listening to the prompts, I find the phone screen to be OFF. I know that it's a power saving feature. However, it's quite annoying when to have press other keys to continue. I have to press the power button to get the screen to come back on.
Secondly, when connected to a call, the dialpad goes to the status screen by default. I have to change to keypad as well.
So here are my questions:
1) Anyway to change the amount of time before the screen blanks out while in a call?
2) Any other way to turn on the screen quickly without have to push the power button (which is difficult to push BTW)?
3) Any way to make the dialpad go to the numbers by default after a call is connected?
Thanks for any inputs!
Using WM6.1 ROM by Duty
anubus12 said:
I find this rather annoying, but don't know how to adjust it.
When making a call, sometimes you have to press through prompts like, 1, 2 , 3 etc. But after listening to the prompts, I find the phone screen to be OFF. I know that it's a power saving feature. However, it's quite annoying when to have press other keys to continue. I have to press the power button to get the screen to come back on.
Secondly, when connected to a call, the dialpad goes to the status screen by default. I have to change to keypad as well.
So here are my questions:
1) Anyway to change the amount of time before the screen blanks out while in a call?
2) Any other way to turn on the screen quickly without have to push the power button (which is difficult to push BTW)?
3) Any way to make the dialpad go to the numbers by default after a call is connected?
Thanks for any inputs!
Using WM6.1 ROM by Duty
Click to expand...
Click to collapse
KaiserTweak should solve some of your problems, if you have installed it.
http://forum.xda-developers.com/showthread.php?t=333898
tkalli said:
KaiserTweak should solve some of your problems, if you have installed it.
http://forum.xda-developers.com/showthread.php?t=333898
Click to expand...
Click to collapse
that utility doesn't change any of those settings.
anubus12 said:
that utility doesn't change any of those settings.
Click to expand...
Click to collapse
isnt that was the fast sleep and the sleep function in KT does??
Speaking of dialpads,
Do any of you guys having problems with inaccurate digit presses? I mean, I try to press 2, and 0 gets pressed instead, or other adjacent and non-adjacent numbers. Quite annoying really. Anyone experienced the same?
I just read somewhere on the internet (and now experienced) that the Kaiser/TyTn II goes into a sort of hibernation mode while during a call or, if left for a time interval. The hibernation can only be awakened if you slide out the keyboard or press the "Power Off" button once.
Can you please tell me as of how I may solve this problem?. I am a new user so would appreciate any help (I did search the forum but couldn't find anything)
ROM Version: 3.28.161.1 WWE
OS: Windows 6.1
Regards
D3solat0r said:
I just read somewhere on the internet (and now experienced) that the Kaiser/TyTn II goes into a sort of hibernation mode while during a call or, if left for a time interval. The hibernation can only be awakened if you slide out the keyboard or press the "Power Off" button once.
Can you please tell me as of how I may solve this problem?. I am a new user so would appreciate any help (I did search the forum but couldn't find anything)
ROM Version: 3.28.161.1 WWE
OS: Windows 6.1
Regards
Click to expand...
Click to collapse
What is the problem, your asking for help but you didn't outline a problem to help with? The screen turns off on the phone all the time and yes as you said, you just have to tap the power button or slide out the keyboard to get the screen back.
There is no problem with that.
ChumleyEX said:
What is the problem, your asking for help but you didn't outline a problem to help with? The screen turns off on the phone all the time and yes as you said, you just have to tap the power button or slide out the keyboard to get the screen back.
There is no problem with that.
Click to expand...
Click to collapse
Shouldnt the screen reactivate if I press some other button like the Answer call button or the end call button?.
Or is this supposed to be like this?. But also it shouldnt close in on me like that while during a call because of which I cannot end the call or perform any actions while during a call unless I press the "Power Off" button.
The phone has some buttons on the front of it, you can press the red one to hang up on someone. No need to use the screen, this isn't the iPhone.
I see, thanks alot for the help
To reactivate the screen you have only 2 options either press the power off button or slide the screen. This mandatory designed by HTC
But during your call you can use Advanced Config and disable sleep during call. this will keep the phone active during conversation
D3solat0r said:
I just read somewhere on the internet (and now experienced) that the Kaiser/TyTn II goes into a sort of hibernation mode while during a call or, if left for a time interval. The hibernation can only be awakened if you slide out the keyboard or press the "Power Off" button once.
Can you please tell me as of how I may solve this problem?. I am a new user so would appreciate any help (I did search the forum but couldn't find anything)
ROM Version: 3.28.161.1 WWE
OS: Windows 6.1
Regards
Click to expand...
Click to collapse
Use Advanced Config and disable sleep during call.
Here is the other half of your issue.............
" Hey, everytime I am on a call, my cheek hits the screen and starts a program or hangs up. Whenever I put it to sleep during a call, my face touches the screen during the call and the phone wakes again and starts programs. Is there any way I can make he phone hibernate during a call so this doesn't happen ? "
I would say we are running about 50-50 on these complaints.
denco7 said:
Use Advanced Config and disable sleep during call.
Here is the other half of your issue.............
" Hey, everytime I am on a call, my cheek hits the screen and starts a program or hangs up. Whenever I put it to sleep during a call, my face touches the screen during the call and the phone wakes again and starts programs. Is there any way I can make he phone hibernate during a call so this doesn't happen ? "
I would say we are running about 50-50 on these complaints.
Click to expand...
Click to collapse
Ah so theres the other side of the argument too. I see
Thanks for all the help