Forgive me if this question has come up in the past. I have searched the Wiki without success, especially when it comes to my specific problem.
For reasons that are unknown to me, my TyTN II will no longer play voice recordings on Windows Media Player. When I open the Voice Recorder program and make a test recording, it will not play when I hit the play button. If I then find the file in file explorer (My Voices), and then click on it, Windows Media Player opens, but I get the following error message:
"No combination of intermediate filters could be found to make the connection."
Everything was working fine just a week ago, but now I can't play any recorded files.
Does anyone know how I can resolve this issue? Please help.
Thank you,
Peter
"No combination" issue solved ...
Hey, folks. After a lengthy investigation, several hard resets, and re-installing everything quite a few times, I have discovered the reason for the error message, "No combination of intermediate filters could be found to make the connection."
As my original message indicated, for reasons entirely unknown at the time, I was unable to play sound files. Following my investigation; however, I discovered that the problem was not limited to sound files, but also included video files. They would produce the same error message.
The problem? Pocket Mechanic Professional v2.92 and, specifically, the Registry Cleanup feature. If you fill in either one of the two selection boxes, "Empty Open/OpenDoc keys," or "Empty registry keys," and then run the program, you will delete important registry entries that will immediately stop sound and video files from working in at least the following two programs:
Voice Recorder
Windows Media Player
Hopefully this information can help others from experiencing the utter frustration that lead me to this unfortunate conclusion.
Peter
i have the same software too
is there anybody that can give me those? and were do i put them
thanks
PeterHTC said:
Hey, folks. After a lengthy investigation, several hard resets, and re-installing everything quite a few times, I have discovered the reason for the error message, "No combination of intermediate filters could be found to make the connection."
As my original message indicated, for reasons entirely unknown at the time, I was unable to play sound files. Following my investigation; however, I discovered that the problem was not limited to sound files, but also included video files. They would produce the same error message.
The problem? Pocket Mechanic Professional v2.92 and, specifically, the Registry Cleanup feature. If you fill in either one of the two selection boxes, "Empty Open/OpenDoc keys," or "Empty registry keys," and then run the program, you will delete important registry entries that will immediately stop sound and video files from working in at least the following two programs:
Voice Recorder
Windows Media Player
Hopefully this information can help others from experiencing the utter frustration that lead me to this unfortunate conclusion.
Peter
Click to expand...
Click to collapse
[email protected]!
That thing also happened to me!
Any way (other than hard reset) to fix it?
Related
so i've been browsing this forum about 2 days now and trying different ways to try and operate this program. i downloaded the files from the thread that Nyer78 created:
(http://forum.xda-developers.com/showthread.php?t=328163)
i followed the exact instructions on installing and it installed perfectly. i replaced the config file he provided to get the iContacts to work and it was great. But when it's suppose to pop up to lock the device it would have an error:
PPL Runtime Error
App: SLIDE.EXE
File:SLIDE.EXE
Proc:WINMAIN
Opcode:LOADSPRITE
Chat/Line/Offset:0,0,
0x005391e0
eRROR LOADING IMAGE \Program Files\Slide2Unlock\GFX\Res\wallpaper.bmp
then i read how i needed to change it to JPEG/JPG and i did in the res folder. after i read that i needed to do it in the configs and i did, but everytime i soft reseted my ppc, the same error message would come up. the iPHONE theme is installed in my storage card and the slide2unlock program is on my device. (keep in mind after messing with the configs i would soft reset my device) so i tried uploading my own photos size 240x320/320x240 and it still didn't work. also when i open up the files on my device it shows as a jpg/jpeg, but when i connect it to my computer via bluetooth it shows as a bmp. anyone know whats going on and so forth? also i tried turning iLOCk off then turning it on then turning on slide2unlock and still doesn't work. any help, suggestions are welcomed. Thanks alot guys you've done so much already as to overclocking and things like that.
84 views and not one post!?!
seriously?!?!
i have knowledge said:
so i've been browsing this forum about 2 days now and trying different ways to try and operate this program. i downloaded the files from the thread that Nyer78 created:
(http://forum.xda-developers.com/showthread.php?t=328163)
i followed the exact instructions on installing and it installed perfectly. i replaced the config file he provided to get the iContacts to work and it was great. But when it's suppose to pop up to lock the device it would have an error:
PPL Runtime Error
App: SLIDE.EXE
File:SLIDE.EXE
Proc:WINMAIN
Opcode:LOADSPRITE
Chat/Line/Offset:0,0,
0x005391e0
eRROR LOADING IMAGE \Program Files\Slide2Unlock\GFX\Res\wallpaper.bmp
then i read how i needed to change it to JPEG/JPG and i did in the res folder. after i read that i needed to do it in the configs and i did, but everytime i soft reseted my ppc, the same error message would come up. the iPHONE theme is installed in my storage card and the slide2unlock program is on my device. (keep in mind after messing with the configs i would soft reset my device) so i tried uploading my own photos size 240x320/320x240 and it still didn't work. also when i open up the files on my device it shows as a jpg/jpeg, but when i connect it to my computer via bluetooth it shows as a bmp. anyone know whats going on and so forth? also i tried turning iLOCk off then turning it on then turning on slide2unlock and still doesn't work. any help, suggestions are welcomed. Thanks alot guys you've done so much already as to overclocking and things like that.
Click to expand...
Click to collapse
Why not use the newer version that less issues. S2U2.
I've been using it for awhile now and it seems to work a lot better.
I have attempted to flash Touch-IT 3 to my WING and it failed. I tried this twice the first time it disconnected somewhere in the middle of flashing and the second time it gave me a sector "error" (Can't remember exactly what it said). Now the lucky part is that I have be able to restart the device and it does function partially. Problem is that most of the functions of WM6 are now missing and I would like to have some opinions as to what would be a good way of building a usable device from this.
Things I need
Office
Transcriber (I am one of the few that use this)
Internet Sharing
A text messaging app. (I can receive them but cannot reply-to or find them after I dismiss it).
What to tweak to improve sound quality.
Network Name (like it says T-mobile not GET MORE.......)
WiFi to connect without having to select the network and press connect
Bluetooth Functionality (Bluetooth Sharing, A2DP)
A fix for this memory leak
Current State
32.98MB Storage Free
26.19MB Program Free (After Soft Reset)
No Programs Installed (Under Remove Programs)
Touchflo with Cube (Installed From Flash)
HTC Audio Manager (Links but no program)
MS Word (found a link that works but seems to be decompressing from someplace)
HTC Album (Does seem to function)
Total Commander
Calendar
Camera
Contacts (Has references in menus to PocketCM but it is not there)
Windows Media (Touch-It Skinned)
Tasks and Voice Recorder (Work)
Help (Has contents and most help files it seems)
HTC Home (Functions but no options)
That covers just about everything. If anyone has any ideas I'll be glad to hear them. The things in the list are the only stuff I have no idea how to put on without cooking them into a ROM and some of the stuff I have never even tried before.
Thanks
Look at either the HyperCore kitchen or the EasyBakeOven. The hypercore has more options, but the easy bake oven... well, it's easy. These will help you create a ROM.
As far as the errors, make sure the phone has its phone features turned off when you do start updating. If someone tries to call mid-update, it will break the update.
Hi all,
My P4350 is showing the Notification Error for every now and then. It says "Cannot execute\Application Data\Volatile\pockeplayer wakeup.exe"
The Conduit Pocket Player had no problem. Once my friend took the phone to listen to the music. After the phone came back to me this error is appearing.
I uninstalled the application. But, still the notification persists.!!!
Help me.
Hi all,
I uninstalled the application and reinstalled. But, the error still pops-up every now and then.
There is nothing in that path, which the error notification shows.
Is this a virus? Do I have to change any registry?
Please help me.
Any solution?
Hi,
I may sound that I am in hurry to get a solution ofr the problem.
In mean time, I renamed the S2U2 as pocketplayerwakeup.exe and saved that into \Application Data\Volatile\
May sound crazy!!!!!!
So that, if the phone wants to do something, let it lock the keys. So, now I am not getting the Error message.
But, still is there any solution for this?
error again
The error appeared again on today. i was surprised to see that, the duplicate copy what I created was not there. Don't know how that file was deleted. I again created the file.
Is there a solution to this? (Apart from flashing the ROM).
Whenever I connect the phone to computer, it is deleting the duplicate file what I created.
So, whenever I unplug it from computer, I again start getting the same error notification.
It looks like some background services tried to execute that path. Here is my appoarch, but be caution, if you are not familiar with the registry, please make a backup before editing anything.
First check if no "weird" stuffs is in the "\windows\startup" folder, then check if that path or file is refered to in the \HKEY_LOCAL_MACHINE\Init and \HKEY_LOCAL_MACHINE\Services of the Registry and delete them. If still nothting there, make a complete search of the registry to see any reference to that file and delete it (it's ok since you already uninstall the program). Hope this help.
I am even more dumb when it comes to registry. (I can modify something if the name of the particular key is given.)
I could find the follwing thing in Windows/Startup
Capnotify.lnk
poutlook.lnk
WifInit.lnk
sddaemon.lnk
iLock2.lnk
WkTASK.lnk
GPRSNotify.LNK
Among these I don't know what does Capnotify.lnk and sddaemon.lnk do. I don't even know how to find the registry key which it referes to.
raghu13uk said:
Among these I don't know what does Capnotify.lnk and sddaemon.lnk do. I don't even know how to find the registry key which it referes to.
Click to expand...
Click to collapse
Try PHM Registry editor. Do a search with "pocketplayer" or "wakeup.exe".
No success
I finally installed PHM registry editor. But, did not find anything for wakeup.exe
What to do?
Hi guys,
I have had to get a new Tytn II here in Australia due to water damage on previous model .... a real fun time
Previous model had WM60, this one has WM6.1.
W 61 is creating a problem cos I run a program called Winterface. I love it - does what I want. However the previous manner in which Winterface operated (notifications, program handling ...) is not happening.
I contacted Winterface and they asked me to download newest version to see if that would fix things. I have but I cannot install it.
I get the following message:
"The file PowerDemon' cannot be opened. Either it is not signed with a trusted certificate, or one its components cannot be found. If the problem persists, try reinstalling or restoring this file. "
So is there a way of disabling certificate checking from within 6.1??
looked on the phone and via google but nuthin has come up...
Cheers
Get Kaiser Tweak for this forum and there is a setting where you can disable certificate checking. It sounds like it's more of an app problem than anything else.
Thanks for that - i have installed Kaiser Tweak and the problem persists. Definitely an app issue. The VITO support is helping me at the moment so hopefully a resolution is in sight.
cheers
shaunl said:
"The file PowerDemon' cannot be opened. Either it is not signed with a trusted certificate, or one its components cannot be found. If the problem persists, try reinstalling or restoring this file. "
Click to expand...
Click to collapse
Well, you have your answer right there.
Only 2 choices: either ask Vito to correctly signed their apps and files (most likely), or they really gave you crappy app with something missing.
BTW: Vito is well-known crapapp maker.
It started as very innovative company - now its just moneymaking crapola.
shaunl said:
"The file PowerDemon' cannot be opened. Either it is not signed with a trusted certificate, or one its components cannot be found. If the problem persists, try reinstalling or restoring this file. "
Click to expand...
Click to collapse
Well, you have your answer right there.
Only 2 choices: either ask Vito to correctly sign their apps and files, or they really gave you crappy app with something missing.
BTW: Vito is well-known crapapp maker.
It started as very innovative company - now its just moneymaking crapola.
@MACkjam
No user of commercial software (which he *paid for*) should have ever resolve to "unlocking" his phone or such in order to use the commercial software on it, man... its a blasphemy
Just to be certain, check the security level with this tool on your Kaiser:
http://www.microsoft.com/downloads/...8C-D587-47E0-908B-09FEE6EA517A&displaylang=en
It may still be an unsigned module problem... Be careful when you change security levels, it may be impossible to reset them without a hard reset.
Hi guys,
VITO responded to my email outlining that disabling the security check did nothing.
A new version of Winterface was released (1.15) and voila it installed and runs as it used to under W6.0. VITO help was great and it looks like problem solved.
-888- - I was interested in your comment on VITO being a crapapp maker. I have found Winterface, SMS chat and zoomboard really good apps - in fact the best I have seen for Win Mobile. Just my opinion of course.
many thanks to everyone for their input and help - really appreciated!
BTW - I will be using Kaiser to reset the certificate checking.
Cheers
Shaun
Hi there!
This is my first post, so I would like to start it with this:
Great forum!
I've found many great updates and tweaks to my tytn around here, and also been given the oppurtunity to try out a few different roms! Very nice work from just about all of you!
- keep up the good work!
--- problem description ---
However, there's a few thing I cannot find an answer to.
One of them is the mms function - I belive the program is arcsoft (don't know wich version)
The problem is not the one where people are unable to download mms messeges.
I can download them and view them. For example - opening an mms with included image is no problem.
But I cannot do the same thing with mms containing video-files. Mostley all of my friends that send me videofiles does have sony eri.. phones, and I'm pretty sure they use the .3gp format for saving video files.
So, when I try to open the video file you can see the timeslide moving, but it wont display any video nor it will play any sound.
If I instead save the file to any location and then open it in a program like coreplayer it will play just fine.
Another problem wich probably is related to this is the fact that I cannot view the video files that I record with the camera directly. It says "cannot open/play the file" in wmplayer...
--- I've tried this ---
I have tried to add some missing .dll files to the windows directory wich I found in an older thread. No good thou..
Also tried to set the the files to open in coreplayer instead of windows media player, but with no result.
Another thing I've done is trying different roms. But because I didn't noticed this problem until "a few roms ago" I don't know if it did work in any of them.
Will continue to try anything I can come up with.
--- And the solution is... ---
changed to another rom, garmin v6. Now its working.
I'm having the same problem, too. Is there a fix to this?
I'm using a stripped down rom and I don't want to sacrifice the cleanliness of it just for videos....
But I'd really like videos.
Got an email about a reply to this thread. I'm sorry thou, but I have not found a fix, since I installed another rom instead.