Database Develop

Charmer crashed with the new Aku 3.3!

Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !

Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.

It doesn`t work too, it always stops at 95% has anyone another idea?

did you try hard reset?

Yes i tried hard reset, but it is always in bootloader!

I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!

nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079

Sorry but i do not speak hungarian. What do you want to tell me ?

I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???

oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???

Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!

that link is broken

Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!

Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!

Musna do you have any massage such as msn

qtek 2020i Stuck Help Needed

Hello Guys,
I found this Forum after a long search.I have a qtek 2020i and when I was trying to upgrade the ROM it all went dead and it shows on screen as usb or serial v1.01. I dont know what to do Iam desperate.Someone told me to flash the ROM ,
1.How do I Flash the ROM , what is the procedure
2.And then how do I proceed so that my QTEK works and iam ready to use it and make calls.
I would be really Greatetful if someone can help me out here . My email is [email protected] or you can post the reply here too.Please Help
Emmanuel

emmany said:
Hello Guys,
I found this Forum after a long search.I have a qtek 2020i and when I was trying to upgrade the ROM it all went dead and it shows on screen as usb or serial v1.01. I dont know what to do Iam desperate.Someone told me to flash the ROM ,
1.How do I Flash the ROM , what is the procedure
2.And then how do I proceed so that my QTEK works and iam ready to use it and make calls.
I would be really Greatetful if someone can help me out here . My email is [email protected] or you can post the reply here too.Please Help
Emmanuel
Click to expand...
Click to collapse
1: make sure your pc is NOT running vista, u can only run a rom update on a XP pc
2: if running xp, just run the update again it somtimes stalls but it will work the second or third time, it did this to me on my first update. it will take about 20-30mins
as for the rom just download one in the 2020i threads and run it

no gsm on boot

hi all,
i am having a problem with the trinity i unlocked sim with a tool i found here and then upgrade rom to 6.1 using hardspl 1.30 by oli till now everything is fine and working i decide to upgrade the radio rom and the flashing went 100% but when the device rebooted it was showing no gsm and it would start windows and get stuck in windows loader i tried to refalsh spl to 1.2 to des and always flashes 100% but 1.30.olipro stays tried to reflash with every radio rom i found for trinity and always flashes 100% but still no gsm i tried os cooked and official but with no avail. i found the original spl 1.06 but its .bin any one know how to load it on the device.? i found too some other people with same problem but i cant find any solutions i checked the device with mtty there is no bad blocks but when i do checkimage it gives me a error on radiorom checksum timeout..... does anyone has a solution for my problem please ? any help would be really appreciate it !!!!

no GSM FIX
hi all to all of you who have my same problem ... after hours and hours hours of searching and trying to find a solution i manage to get trinity back working ehat i did i used this tool attached found here on xda. its made by POF which i thank very much!!! i used it and downgraded the spl to 1.2 olipro after i could flash ant radio rom..... and was back in the game!! hope this could help you all who have the same problem

Hi thanks for this info I have the same prob. Would you plz tel me which ROM did you use to revive your trinity.
thanks

hi,
i have the problem of no gsm ...i download your tools but i dont khnow how to use them ...pleas help me ...
sorry for my english

need urgent help with my diamond

ive got a "xda diamond" (o2-unlocked) and its in german...
i installed hardspl but i cant flash any other roms,ive tried "Energy.DIAMOND.29020.Sense2.5.Cookie.2.0.Touch.Of.Glass.May.15"
and
"Memo 2.7.3.0_Std" and it wont go from 0% and after some time i get an error
right now it says
rom version: 2.03.207.2 GER
rom datum: 02/13/09
funkempfangerv..:1.09.25.23
protokoll-version:52.51.25.26h
im no german i want english... please some 1 help me what to do

Try flashing a stock WWE(World Wide English) rom. Then try to to upgrade to a custom rom. If it still doesn't work try using a different version of Hardspl.
Here is a link to some diamond stock roms:http://shipped-roms.com/index.php?category=windows mobile&model=Diamond
Hope I could help

i changed hardspl and then tried again with "Memo 2.7.3.0_Std" and it worked
thanks

[Q] A little advise need here - Flash

Hello guys,
First of all i would like to thank you folks for doing this job for people like me. XDA is a great developer thread!
I recently (about a week ago) purchased a new Sony Xperia X1 and thanks to XDA i installed Android on the device. The flashing went perfect, no issues.
Recently i got some errors regarding the Android software so i wanted to flash back the WM stock, and here is where is f... up.
I downloaded all the tools, SPL , stock rom and stuff and accidentaly flashed the original SPL before the stock rom. So now i`m stuck with Android and the original SPL. I searched for 3 hours now how to get past this but i feel like there is no answer. Maybe you guys you can help me out. I would really like to get back to stock rom maybe you could help me.
Thank you for your posts in advice!
Dj Soby

Solution
I managed to work out.
All you need to do is to flash a STOCK rom. This will get back your phone to original state, then you can HARDSPL and flash a custom rom.
This can be a solution for those who has 262/260 error or img file flashing stuck at 0% or "Loading".
Here is an image i could find after several hours of searching:
[Later-i cant post it yet because i`m a new user. PRV Me for the link]
I hope it helps somebody.

no need hspl
http://forum.xda-developers.com/showthread.php?t=497511