I had this problem as stated in the topic.
The progress bar doesn't move at all.
After awhile, my laptop states that ERROR 262 occurred.
I tried a few more times and it is still the same.
Can any one help me on this?
first of all if u try to update a rom different from ur own country u need to do Hard SPL http://forum.xda-developers.com/showthread.php?t=400950
I was getting error 262 also, until I realised that you need the Developer version of the HardSPL installed (I'd just installed the normal one) - as this rom is not signed.
Alright man! You guys are geniues! WORKED LIKE MAGICK!
THANKS!
Related
Hi Guys, I have bricked my Cingular branded BA Siemens SX66 PH20B. I am getting the no GSM error, I have read the WIKI and read the thread that follows Help, my device shows "No GSM" after upgrading, and I can not perform any more ROM upgrades Link. I have tried the steps and nothing seems to be working, I guess I must be a complete noob but i have spent hours trying to get the radio to install and nothing will work. I have spent 6 or 7 hours looking on here before i requested help I was running the radio unlock when a tree took out the power line to my house. I edited the ruu.conf and that didnt help I ran the MaUpgradeUt_noID.exe and it will update my rom with no problems at all it just hangs at the radio install and wont go anywhere i get a "Error 114: Radio update error" If someone can help I would appreciate it.
Might help.
I'm not quite sure about your problem but I did get the same radio update error couple times. One thing that I had to do is to let my computer (active sync) recognize my device first. After that the redio update error is gone.
I got it fixed, what i did was install an original rom from seimens that i got at SX66 (Blue Angel) Standardization Project, itfixed the radio error and then i could reinstall the updates
Not a noob to this, but new phone.
I have a Rogers GSM Xperia x1a
and i have tried everything i have read, and am simply trying to flash hardspl on this so i can continue onto doing a rom.
The PC gets to progress bar.. 0%
x1a matches 0%
never moves on either end,
then error 262 is displayed on PC
and i then need to remove battery from x1 to get it to reboot.
someone somewhere has had to bypass this.
I am in need of that knowledge.
TY
ok, so i have been able to flash a rom, without hard spl....
and when i did this my spl is now 0.72
but i can only flash this one rom, and i dont even know what rom it is.
so im even more lost now.
i don't know witch windows do you have but try just to run the custum ruu with coptability mode win xp sp3
using vista, and it has to do with hard spl. or the phone itself, as i can update roms if they are stock updates.
Usually the 262 error has to do with not hard spled or not properly hard spled. Try to install hard spl again and check the tri color screen if it has really been installed.
right, and thank you for your response.
but
and i have tried everything i have read, and am simply trying to flash hardspl on this so i can continue onto doing a rom.
The PC gets to progress bar.. 0%
x1a matches 0%
never moves on either end,
then error 262 is displayed on PC
Click to expand...
Click to collapse
well, i have no idea wtf i did.
well i do know i didnt do anything LOL
i decided to run hard spl 1 last time.
and ill be damned it worked.
no clue why but it worked.
just one advice. Please remove your Storage card before HardSPL X1
or else u will get error....while HardSPL
thanks!!
please help me to flash rom always stack on 13%..
please help me..
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
ferdiebaq said:
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
Click to expand...
Click to collapse
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
jheizee said:
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
Click to expand...
Click to collapse
I have the same problem
but can't instal bootloader or flash any ROM
I tryed to flash the original rom but it stucks to 13%
I tryed to instal many bootloaders but when it cames to 100% it says that image is corruped (error 270)
can any one help me ??
up guys.. please i really need your help..
i want my trinity back..
OK. I've had that problem before when I first got my Trinity. Been through a lot of trial and errors before I was able to do it correctly. I don't know if this can help but this is how I did it. Usual warning.... I am not responsible if you brick your device.
Just look for the following files in the Trinity thread and install them in the following order:
1. HTC Trinity SIM & CID Unlock - v1
2. Install Olipro 1.20
3. Now I don't know if this should be done but I read somewhere that you should upgrade your Radio version so I installed "Trinity_Radio1.56.70.11"
Even though I have done these steps already I always do them again WHENEVER I install a new ROM. It does not hurt to repeat them.
If you are getting "error vender id" message then it means that your unit is locked again so you have to unlock it again like I said in my previous post. You must have installed an official ROM previously which will lock your phone again.
please help me to get my trinity back
i think that my phone has been locked because i can't instal any ROM or HardSPL
I tryed to flash windows d. 3.3 Dmore (wm 6.1) but when i boot windows it stucks in the green screen so i can't run cid unlock.
i cant send the phone for servise because i get it from a friend and i havent the receipt
please help me to get my trinity back
thanks guys.. my trinity is alive again.. hehehe
i just remove the radio.nb and its continue upgrading..
but the problem im facin now is everytime i flash radio its always stuck at 0%..
i think my radio bootloader is damage?..
any idea?
any have a schematic of radio ic? where i can find it? how does it looklike?
try to use SSPL, after flash official ROM and then try again from beginning
maybe can help...
Hi everyone,
i've got a problem... i have tried to flash hardspl (bootloader) on my x1 but it doesnt work.
i have tried it like i read in the forum in different threads but i cant enter bootloader and when i start hardspl on my pc and take step by step as the program says... after the progression bar came - my phone display goes black and the front panel starts to shine and after a time i get a connection error on the hardspl program...
can anybody pls help me????
did you take out your micro sd card out of your phone?
That was my problem...........
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
hard spl
hi
i had some problems !
here is the best info
try every thing and search and read what i understud was that some phones have different ways to get in to the right hardspl mode i all most gave up and then it workt
DONT GIVE UP I WAS ON IT FOR 2 WEEKS
THE WORST THING IS I DONT REMEMBER WHAT I DID SORRY !
HASSE
tilsid said:
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
Click to expand...
Click to collapse
Several time ago i got that error too, but i never give up. Try another hardspl for xperia, when u click it, it will auto generate to extract some file, just click romupdate utility and follow the same procedure.
If still got some error, try install it from a fresh computer with usb 2.0 installe and active synch.
You just got that error becouse there is some miss connection with another usb device.
UPDATE: it worked
So I did a hard reset on the phone (settings-> clear storage) and then tried again. Worked like a charm. Installing ROM right now!
Thanks everyone!
Moved to X1 Q&A as not Rom Dev
it still not work...
i have tried all you write me...
no it says first "no file found" and trys to update over usb and than it says again connection error...
what shall i do?
Hello, so as I stated in the title, I want to flash a custom rom to my X1, I have already installed HardSPL, .72 version, and tried to flash an Energy rom.
The SDCard method won't work, I get the "Image file not found" with my card, and the same error but with some red letters appearing on top of the screen with the other 2 cards i tried. I tried to use KovskyAdvancedRUU to task28 (flash the phone regularly) and as soon as it gets to 1% I get the "Invalid Model ID" error.
Any ideas? Seriously, I don't know if this has been answered before but I have been searching for days and found nothing.
I will be really grateful if someone can provide help, and really sorry if there's already an answer on this.
My already installed rom is WM6.1, stock, Greek.
use hardSPL .78 try again.be sure u did steps in right order
Thanks for the reply! Please check the thread again later, I'll post the result!
dont forget use task 29 before flashing and hard reset after flashing for good perform for your rom...