Database Develop

Scandinavian characters (ö,ä)?

How can I map scandinavian characters (ä, ö) to my hardware keyboard and how to get them into the on-screen digital keyboard as well?
-John

johniemi said:
How can I map scandinavian characters (ä, ö) to my hardware keyboard and how to get them into the on-screen digital keyboard as well?
-John
Click to expand...
Click to collapse
I use Resco Keyboard Pro (Screen Keyboard, I don't know if it works on the hardware keyboard as I have an Alpine, you can set a secondary the keyboard language, and just press a key on keyboard and you can swap to a Norweigan keyboard, I know cause I have a sister in Norway.
Download demo from here to try out.
www.resco.com

So it can also remap the hardware keyboard?
-John

No, you allready have it. Pres 'a' or 'o' button, then doublepres dot button. After that pres space for as manu times than 'a' becomes 'ä'. Enjoy!

Is there not a faster way? Like a registry hack that would give "ä" when pressing "a" twice very fast? I think that would be a lot faster method - doubleclicking "a" rapidly to get "ä".
Could this be done with a registry editor?
-John

johniemi said:
Is there not a faster way? Like a registry hack that would give "ä" when pressing "a" twice very fast? I think that would be a lot faster method - doubleclicking "a" rapidly to get "ä".
Could this be done with a registry editor?
-John
Click to expand...
Click to collapse
Changes Sym-button order,that a-letter changes first to ä-letter and then to å-letter. ö-letter the same
http://www.qtek.fi/9100tuki.htm
http://www.qtek.fi/Qtek9100/Sym-patch.exe

Hej! How do you make this characters with Swedish ROM? I don't have it here, so can't say. Do you know?
The other way is to install Aekmap and remap buttons according to the way you want them to (ae.inc.ru)

tavi said:
Changes Sym-button order,that a-letter changes first to ä-letter and then to å-letter. ö-letter the same
http://www.qtek.fi/9100tuki.htm
http://www.qtek.fi/Qtek9100/Sym-patch.exe
Click to expand...
Click to collapse
I don't have a Finnish version of the Wizard so I can't download these (wrong IMEI). Could you please email the Sym-patch.exe to [email protected]
Thanks!
-John

cBorisa said:
The other way is to install Aekmap and remap buttons according to the way you want them to (ae.inc.ru)
Click to expand...
Click to collapse
I tried Aekmap but I just couldn't customize it. The menu was hard to use, is there a help file somewhere?
PS. Also, I can't see any scandinavian letters on the Full Screen Keyboard.
I don't know why everything has to be so hard with these Win CE devices, I never had problems finding easy to use programs for my Palm devices...
-John

DAz999 said:
johniemi said:
How can I map scandinavian characters (ä, ö) to my hardware keyboard and how to get them into the on-screen digital keyboard as well?
-John
Click to expand...
Click to collapse
I use SPB Keyboard Pro, you can set a secondary the keyboard language, and just press a key on keyboard and you have your characters, I know cause I have a sister in Norway. In fact I use a lot of their software, which has improved the WM2003 no end.
www.spbsoftwarehouse.com
Click to expand...
Click to collapse
OOPS Sorry, I use so much SBP software, its not their keyboard program I use, it is Resco Keyboard Pro at http://www.resco.com :lol:

johniemi said:
I tried Aekmap but I just couldn't customize it. The menu was hard to use, is there a help file somewhere?
PS. Also, I can't see any scandinavian letters on the Full Screen Keyboard.
I don't know why everything has to be so hard with these Win CE devices, I never had problems finding easy to use programs for my Palm devices...
-John
Click to expand...
Click to collapse
Well, in order to make it work you have to read an AEC FORMAT section at Aekmap page.
You may contact me via ICQ or by PM and I will explain you in details if the web-site doesn't give you a clue.

Solution to get scandinavian characters (å, ä ö)
This is the most simple way to get scandinavian/Swedish charset on your device.
Hardkeyboard:
ftp://xda:[email protected]/Uploads/HTC_Wizard/Misc/Swedish hardkeyboard fix.zip
(Source:http://www.smartmobile.se/)
Softkeyboard:
ftp://xda:[email protected]/Uploads/HTC_Wizard/Misc/Scandinavian softkeyboard.zip
(Source:http://www.epocket.no/tastatur/)
No tweaking needed.
Have a nice day!

Hi, resurrecting an old thread... I just got a new HTC Wizard and I can't get the softkeyboard from http://www.epocket.no/tastatur/ to work.
I installed it, and it shows up on the Remove Programs menu but I can't use it... I mean; I can't find the program anywhere and the softkeyboard looks the same as before.
-John

HTC Touch Keyboard+Keypad Input Problems...any ideas?

I downloaded the HTC Keyboard+Keypad as a new SIP. Really nice. Got it from here: http://forum.xda-developers.com/showthread.php?t=336587
Only problem is that once i use it, it takes over the calling dialpad. I end up having to hit the red button end, go back to the today screen, then hit the green button send to bring up my real dialpad.
Any ideas how to fix that? Anyone else download that keyboard? Have problems? Or is it just me.

hmm i dont seem to have prob with the new cab except that it kills the native 'auto-correct' feature.. which i DO need when using the hardware keyboard.. so.. too bad for me

Can someone post a screenshot of what this keyboard looks like?

Not sure how to do that but I can say after a days usage it is MAGNIFICENT....

Go to the link I put in my first post for screen shots.
How do you get it to work flawlessly?
I end up with the full keyboard and can't change it to the keypad.

freddiemac1 said:
Go to the link I put in my first post for screen shots.
How do you get it to work flawlessly?
I end up with the full keyboard and can't change it to the keypad.
Click to expand...
Click to collapse
Same here...

trjons said:
Can someone post a screenshot of what this keyboard looks like?
Click to expand...
Click to collapse
There attached.. Cheers

benme23 said:
There attached.. Cheers
Click to expand...
Click to collapse
How to do it on Kaiser?

For me, it is working fine in Words.
But I cannot use XT9 on SMS.
Does anyone know what is the problem?

does anybody know a way to disable the automatic change to the querty keyboard when in a java app or on a password field?
I prefer to keep it XT9, but it sqitches to querty on it's own.

HTC Keyboard full QWERTY problem

Hi everyone,
I've tried to search in the forums but I couldn't find it.
It's not a really big issue, but it annoys me a bit..
I found that the HTC keyboard's font looks a bit different after soft resets. The font looks a bit thinner than it is supposed to. (Screenshot attached)
However, after toggling between Compact QWERTY back to Full QWERTY, the problem is gone.
This only happens with some ROMs that I've installed .. now I'm using official 1.93.707.1 WWE .. it used to happen with the elite 3.0 as well.
Has anyone experienced this?

techdave said:
Hi everyone,
I've tried to search in the forums but I couldn't find it.
It's not a really big issue, but it annoys me a bit..
I found that the HTC keyboard's font looks a bit different after soft resets. The font looks a bit thinner than it is supposed to. (Screenshot attached)
However, after toggling between Compact QWERTY back to Full QWERTY, the problem is gone.
This only happens with some ROMs that I've installed .. now I'm using official 1.93.707.1 WWE .. it used to happen with the elite 3.0 as well.
Has anyone experienced this?
Click to expand...
Click to collapse
I got the same problem with the 1.93 original dutch rom.
Still no solution here?

The same happens to me with original Vodafone ES ROM (1.93.164.2 ESN)

Noby has a solution for this problem?

ben®nie said:
Noby has a solution for this problem?
Click to expand...
Click to collapse
Omg WHY does it matter?

I have another very annoying issue with my "Full Qwerty" keyboard : it stays locked on the symbol tab, even after a soft reset, and the "ABC" button does not work anymore. Is there any way to "reset" all the settings of that keyboard (perhaps by deleting some reg keys)? Thanks in advance!

This has happened to me, too. Keen for an answer. Thanks

bugmenot said:
Omg WHY does it matter?
Click to expand...
Click to collapse
Aswers like this is just what this community needs....
ontopic:
The font problem occurs when you use a ROM that does not has the Manila plugin. If you do have it you might want to hide and show your keyboard to fix the issue.
I've attached a CAB that makes the font change from Helvetica to Segoeui it should make look your keboard just fine.
It's part of my personal tweaks so don't know where the original came from...

malagem said:
I have another very annoying issue with my "Full Qwerty" keyboard : it stays locked on the symbol tab, even after a soft reset, and the "ABC" button does not work anymore. Is there any way to "reset" all the settings of that keyboard (perhaps by deleting some reg keys)? Thanks in advance!
Click to expand...
Click to collapse
I had exactly the same problem after installing Pocket CM keyboard, I uninstalled it and the problem went away
I dunno if you have it installed though... Just thought I'd mention it...

mccune said:
I've attached a CAB that makes the font change from Helvetica to Segoeui it should make look your keboard just fine.
It's part of my personal tweaks so don't know where the original came from...
Click to expand...
Click to collapse
I've tried the .cab. Thanks for that.. the font now looks close to the original one,..almost..but not the same..
Still looks ok tho, I'm going to use it for the time being.
I think we're heading to the right direction.

owziee said:
I had exactly the same problem after installing Pocket CM keyboard, I uninstalled it and the problem went away
I dunno if you have it installed though... Just thought I'd mention it...
Click to expand...
Click to collapse
Yes, I had. I just uninstalled it and my Full Qwerty SIP is back to normal. Thanks a million for the hint. Now we need to go after Tene and ask him to fix that bug ;-)

keyboard problem

Hi experts!
The time has come again for me to call on your knowledge.
I has installed fingerboard v2.0 on my kaiser ,i like this keyboard alot the only problem is everytime i soft reset it reverts back to the roms keyboard which is driving me mad!!!
Is there any way to stop this?
Thanks in advance
Djp76

SIPChange attached.

Thankyou very much stylez!
Will this work on any keyboard i choose to use?

Should do give it a shot basically run it tell it the keyboard press set "think it's set lol"
Keyboards like Resco tend to work without SIPChange but generic ones often need SIPChange.

yeah i should have installed it before asking stoopid questions,cheers!

djp76 said:
yeah i should have installed it before asking stoopid questions,cheers!
Click to expand...
Click to collapse
I never said that i let you off since from essex JK

View Chinese

Hello! Why Dialer calls cannot show chinese, but contacts show chinese is ok.

waikit818 said:
Hello! Why Dialer calls cannot show chinese, but contacts show chinese is ok.
Click to expand...
Click to collapse
Which ROM? Shipped one or cooked one? Please give more details.
Without that nobody can help you?

BeeGee_Tokyo said:
Which ROM? Shipped one or cooked one? Please give more details.
Without that nobody can help you?
Click to expand...
Click to collapse
Cook Rom, dialer calls record cannot show chinese.

waikit818 said:
Cook Rom, dialer calls record cannot show chinese.
Click to expand...
Click to collapse
What cooked ROM did you use?
Windows Mobile 6.1 or 6.5?
Who is the cook?
Look for the thread of the ROM you flashed and search there. Maybe there is already a solution.

search the sunglobe patch, it works!

hertzjin said:
search the sunglobe patch, it works!
Click to expand...
Click to collapse
Doesn't work for dialer still.

it works for me. before it showed the rectangles, after installing the cab and copy the font to window, the chinese characters can be displayed normally.

buddy, would you mind having it uploaded here..?
hertzjin said:
it works for me. before it showed the rectangles, after installing the cab and copy the font to window, the chinese characters can be displayed normally.
Click to expand...
Click to collapse
thank you very much

hertzjin said:
it works for me. before it showed the rectangles, after installing the cab and copy the font to window, the chinese characters can be displayed normally.
Click to expand...
Click to collapse
With your instruction, I still got no luck on getting the chinese displayed and the rectangles still there.
Any ideas?

i suggest u go to some d2 bbs in china. they are all chinese.
if u need,i can mail u some.

kivnzhang said:
i suggest u go to some d2 bbs in china. they are all chinese.
if u need,i can mail u some.
Click to expand...
Click to collapse
any traditional chinese rom for d2?
may you pls give me the address of those bbs? thanks a lot !

check XDA China. In this bbs, there are a lot of ROMs in Chinese

I know. But I prefer the UI to be in English

sorry not reply soon,so busy recently.
you can see that
http://xda-china.com/viewthread.php?tid=3426&extra=page=1&filter=type&typeid=1
if it is useful/.

OCedHrt said:
I know. But I prefer the UI to be in English
Click to expand...
Click to collapse
Go to rick119.com. Such .cab can fix it. I tried the RickyMSYH6.0 there, really worked.

Guys this problem is a really simple one.
First, I haven't had a problem displaying Chinese in the dialer, but I'm still mainly using Chinese ROMs on my D2. They show fine on my WWE HD though.
Still, the problem is going to be whether or not MSYH has been mapped to the font being used in the dialer. Most likely the dialer has changed its font and msyh isn't being mapped there. For whatever Chinese font install cab you are using, look at the included _setup.xml for the current font mappings that it installs. You may be able to add those manually in the registry.
Rob

i have the same probem
RobRedbeard said:
Guys this problem is a really simple one.
First, I haven't had a problem displaying Chinese in the dialer, but I'm still mainly using Chinese ROMs on my D2. They show fine on my WWE HD though.
Still, the problem is going to be whether or not MSYH has been mapped to the font being used in the dialer. Most likely the dialer has changed its font and msyh isn't being mapped there. For whatever Chinese font install cab you are using, look at the included _setup.xml for the current font mappings that it installs. You may be able to add those manually in the registry.
Rob
Click to expand...
Click to collapse
sorry, i can not understand. How can i add manually? Thanks!

有没有安装雅黑语言包什么的

Try this. I have used this on the Diamond, Diamond 2 and HD2 TMobile with no issues. Search for this file: "uhei00m-gray.cab". Copy it to the storage card and install to device. It will require a soft reset. If ALL programs do not display Chinese properly... reinstall the cab file and soft reset again. As a note: If you did not hard reset after the ROM flash this may or may not work with all programs. I have used this together with "kuruan.net_GB_PPC_v2.1.8.cab" chinese handwriting input with absolutley no problems with all ROM's I have tested. The speed of the handwriting recognition is awesome. My first post...lol. Hope it helps. I know all the posts I have read here have helped me tons.

use RickyMSYH6.0. I been using it w/ many different phones, and it works almost every time. if there's some place doesn't display chinese, and some are, then that's means some fonts that didn't remapping to MSYH, then just find out what font that place is using, and then go to edit the reg to remapping it to MSYH
fonts that already remapped can be found here
HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink