Related
When I have both the Touch Cube and S2U2 installed, whenever I try to unlock my phone, the Cube starts instead of unlocking. When I close the cube, it goes back to S2U2, and so on... I had to soft reset my phone and uninstall the cube before I could use my phone again. Anyone else have this problem? Is there a solution?
go to the ftouchflo settings..and add the program to the exclusions..that way it doesnt activate when you try and unlock it
I have both installed. I use touchflo all the time and I've never accidentally activate the cube. In order to activate the cube you have to swipe completely accross the screen from side to side, top to bottom or bottom to top. partial swipe such as S2U2 will not activate the cube. I use pointui, opera mini4, S2U2, PIE, contacts, and pocketCM. All of those programs requires swiping the screen but not completely accross the screen. The trick is to touch the screen before you swipe. The best way to activate from the cube any program is flicking motion starting at the outside of the screen, on the bezel then on to the screen.
Or just do what volcomnator999 said and add it to the exceptions. If the cube ever comes up when you don't want it to, just add it to the exceptions, and it's no problem. No need to change your touching habits.
I have done all things you suggest but cube enable with s2u2...Can't stop it functioning with s2u2.....Any other solutions?
maybe you have older versions of those software try upgrading?
Cube e s2u2 last version....but it is possible that is touchFlo fault...The only old version program
solved!!
The configuration tool doesn't change the .txt file of touchFlo configuration. Edit the .txt and it's all ok!
Hi, I've been having the same problem with s2u2. When I go to unlock it sometimes goes to touchFLO
I've tried editing the config file, but it doesn't seem to work?
here's my config file in case it helps.
; FTouchFlo configuration file
Delay:100
GestureWaitingDelay:10000
;To disable scrolling use DisableScroll:1
; to enable scrolling use DisableScroll:0
DisableScroll:0
UpDownApp:/Program Files/TFloCube/TFloCubeCtrl.exe
UpDownAppCmdLine: close minimizeApp
DownUpApp:/Program Files/TFloCube/TFloCubeCtrl.exe
DownUpAppCmdLine: open
LeftRightApp:/Program Files/TFloCube/TFloCubeCtrl.exe
LeftRightAppCmdLine: spinRight openSpinRight
RightLeftApp:/Program Files/TFloCube/TFloCubeCtrl.exe
RightLeftAppCmdLine: spinLeft openSpinLeft
; Exclude applications
ExcludeocketCM.exe
Exclude:TomTom Navigator
Exclude:Flash lite
Exclude:iContact.exe
Exclude:jmm.exe
Excludeicsel Browser
Excludeoutlook.exe
Exclude:HTCAlbum.exe
Excude:S2U2.exe
; end of configuration
I'm not too sure why it is doing it still...
Any help is appreciated. Thanks!
Doe's any body know where I can download full version of TouchFlo and TouchCube for my Kaiser!!!
Google.com is your friend.
There are lots of versions of the cube out there so there isn't an easy answer.
I have been messing around with the cube tonight and i think the nicest "free" version that you can get going yourself is:
http://forum.xda-developers.com/showthread.php?t=336234
This is slither's flash based cube. You will need to install FtouchFLO and Flash Lite to get it working. If you read through that thread you should get enough info to get you going.
If you don't want to do the legwork you have a few options:
1) Download a ROM with a Cube cooked in
2) Download UltimateLauncher, a nice desktop shell that emulates a cube type effect (as well as other animation options)
3) Try and then buy either Touch Commander or Spb Mobile Shell. Both have "Cube-like" menus that you can use.
Thanks man!!!Serbia thanks you
HTC TouchFlo and Cube vs. scroll bar
I'm running one of the cooked ROMs with the cube and touchflo... I noticed that I have to add most programs as an exception in the touchflo configuration otherwise the cube will launch or the program will minimize if I move the scroll bar too quickly. Is there a way to adjust touchflo to only recognize slides that are done in the center of the screen? Otherwise I have to add every program with a scroll bar to the exception list because touchflo messes up the scrolling.
Does the stock HTC Touch have this problem?
Wayno-san said:
I'm running one of the cooked ROMs with the cube and touchflo... I noticed that I have to add most programs as an exception in the touchflo configuration otherwise the cube will launch or the program will minimize if I move the scroll bar too quickly. Is there a way to adjust touchflo to only recognize slides that are done in the center of the screen? Otherwise I have to add every program with a scroll bar to the exception list because touchflo messes up the scrolling.
Does the stock HTC Touch have this problem?
Click to expand...
Click to collapse
I used to adjust the Timeout using Schaps TouchFlo Config tool, the lower you make this number the quicker you have to swipe to lauch the Cube.
So long as I scrolled at a sensible speed the cube would not launch.
But that's in the past, Cubes are pretty, but I never use them, other than to show off.
Thanks
Dave.
I wish I could just have the picture dialing instead of the hole cube. I guess a one sided cube. Doesnt really make sense does it.
One place to check
HTC Home comes with most ROMS now standard with a few exections but I cant exactly remember where found my Touchflow version but i included it below also check out this site because they have a great htc home screen customizer http://www.pocketemu.com/download.html I hope this helps.
I think the TouchFlo 3D is fantastic for "showing off" your Touch Diamond, but it's a bit gimmicky, and slightly cumbersome, so I'd like to be able to turn it on and off when it suits me.
Out of the box, to do this you need to go into the homescreen settings and select TouchFlo 3D, or, deselect it, and reselect all your usual homescreen plugins - a bit of a pain.
However, I've realised that browsing to the "Manilla exe" in the Windows directory turns on the TouchFlo without affecting your homescreen plugins. If you then kill the manilla process using a a Task Manager which shows processes, you're straight back to your normal homescreen. I've made a shortcut in the Start Menu so I can toggle between the two relatively quickly and easily.
But, I'm looking for some clever person out there to make a simple app which toggles between TouchFlo 3D and normal homescreens at the press of a button. I'm sure it can't be that difficult (for someone who knows what they're doing)??!! It just needs to launch the Manilla exe and then kill it when you want to turn it off.
Anyone fancy having a go?
Cheers
Simon.
It is possible to toggle between spb mobile 2 screens and touchflo 3d though.
Kill Manila.exe
Has anybody come up with an automated(one click) way of killing the Manila.exe process ?
Mortscript
Create a script with Mortscript to check for the presence of manila.exe.
If not present, start it.
If present, kill it.
Create a shortcut to the script in \Windows\Start Menu\Programs
Assign this shortcut to button 1.
Simon D said:
I think the TouchFlo 3D is fantastic for "showing off" your Touch Diamond, but it's a bit gimmicky, and slightly cumbersome, so I'd like to be able to turn it on and off when it suits me.
Out of the box, to do this you need to go into the homescreen settings and select TouchFlo 3D, or, deselect it, and reselect all your usual homescreen plugins - a bit of a pain.
However, I've realised that browsing to the "Manilla exe" in the Windows directory turns on the TouchFlo without affecting your homescreen plugins. If you then kill the manilla process using a a Task Manager which shows processes, you're straight back to your normal homescreen. I've made a shortcut in the Start Menu so I can toggle between the two relatively quickly and easily.
But, I'm looking for some clever person out there to make a simple app which toggles between TouchFlo 3D and normal homescreens at the press of a button. I'm sure it can't be that difficult (for someone who knows what they're doing)??!! It just needs to launch the Manilla exe and then kill it when you want to turn it off.
Anyone fancy having a go?
Cheers
Simon.
Click to expand...
Click to collapse
thought thats called SecondToday?
ToggleManila.mscr
I have the same problem, that I want to turn on TouchFlo 3D, but still want to keep my "Classic" Today Screen intact.
Although I tried SecondToday, however it cannot display the internal plugins such as Tasks, Calendar and Date
Thanks to wensing's suggestion, I created this simple script. If you want to run the script, please follow the instructions below.
a) The first thing you need to do is to disable the TouchFLO 3D from Today Panel Plugins, then activate your favourite Today Plugins (except TF3D)
b) Install MortScript
c) Put the "ToggleManila.mscr" in any folder you prefer.
d) Create a shortcut to this script, name it (eg. ToggleToday.lnk) and put the shortcut inside the folder "\Windows\Start Menu\Programs".
e) Go to Settings->Buttons, and simply assign "Button 1(Hold)" to point to the ToggleToday shortcut.
Of course you are free to experiment with other settings or assign it any other buttons.
Another thing to note is, because TF3D will "take over" the Home hardware button, I have no choice but to kill it, so that the classic Today Screen can be activated after TF3D is killed. However this also means the next time you activate TF3D, it will take some time to load. So please be patient and wait for the TF3D while it is loading.
Anyway, this is my first attempt at using MortScript, just a simple piece of work, but hope that I can bring some joy to my fellow Diamond users.
Hope that it works for you guys
Thanks Wensing
The mortscript suggestion works perfectly.
I am running SwiftBL 3.0, and when I launch the script, TouchFLO3d restarts automatically. Does this script work only on roms that have uninstallable manila?
Or do I have to edit some registry settings so that manila doesn't restart automatically?
when I try and assign a button there are no buttons to select in my menu, any ideas why?
Uncheck TF3D
oldhouse said:
I am running SwiftBL 3.0, and when I launch the script, TouchFLO3d restarts automatically. Does this script work only on roms that have uninstallable manila?
Or do I have to edit some registry settings so that manila doesn't restart automatically?
Click to expand...
Click to collapse
Have u tried to uncheck TF3D from Settings->Today->Items before launching the mortscript?
podman2004 said:
when I try and assign a button there are no buttons to select in my menu, any ideas why?
Click to expand...
Click to collapse
So far, I am using Settings->Buttons and I assign "ToggleManila" to Button1(Hold). By default this may have been assigned to other programs such as Voice Commander etc. Just replace it with "ToggleManila".
I am not familiar with other more advance programs that allow u to assign it to the other hard buttons, so I am sorry I can't advice u on that.
By the way, u might have to create a shortcut that points to the actual file where u place the ToggleManila.mscr, and then u put this shortcut (I simply name it ToggleManila.lnk) inside Windows->Start Menu->Programs before u can select "ToggleManila".
See if it works.
This works great, thanks everyone involved!
I find it better than 2nd Today because the device is much quicker without manila running.
Davey101 said:
This works great, thanks everyone involved!
I find it better than 2nd Today because the device is much quicker without manila running.
Click to expand...
Click to collapse
i second this statement. tried it and works great for me on the touch pro
Have you tried the latest ROMS??
Manila works pretty smooth and yu device will be blazing fast. I will be using it always..
charly_mx said:
Have you tried the latest ROMS??
Manila works pretty smooth and yu device will be blazing fast. I will be using it always..
Click to expand...
Click to collapse
I'm using Dutty's Diamond v1.8 (full) and used to have speed problems when launching applications, particularly after using the audio player.
TF3D is alright but it doesn't actually do anything that special. The weather screen is pretty but most of the other screens are useless, especially the horribly limited 'favourite contacts'. Now that I've got used to the standard windows today screen I prefer it.
I'm looking forward to trying out Schap's TouchXperience though!
that's work very nice
now we must wait for TFL3D tasks and who knows how this thing will be
this works great with the manila2D with the touch. One question though. The script kills the manila2D very quickly, but it does take several seconds for it to run it; any way of speeding that up?
thanks for the script
work very well
thanks for the script. great work
As Leekg has mentioned you can use TF3D and SPB Shell together.
I have left TF3D as it is and installed the SPB Shell as well. On the home screen have reprogrammed one of the Soft keys to SPB Menu -- touching that takes me to the Shell. Closing it brings me back to TF3D!
I do have a question though -- is there any way of changing the default msic player to windows media?
Hi all,
I was wondering if and how you would go about changing the scrolling speed when using your finger...
E.g. If I open anything with a vertical scroll bar (say SMS inbox, file explorer etc), a slight flick of the screen would scroll down (or up) far too quick.
It used to be perfect on my Hermes device as standard.
I'm using Dutty's ROM on my Diamond.
Anywhere that I can change this?
Thanks.
Yes, i would like to know this too. I keep flicking up and down, or accidentally 'clicking an item' which is a pain..
Yeah, accidentally click on an item is also an issue for me (but apparently not for many others!)
Accidental click
Hi,
I'm having the same problem too...
There are some tweaks in the following thread:
http://forum.xda-developers.com/showthread.php?t=398265
Also, try the Advanced Config tool... It has some options too.
But with all these, although there is a slight improvement in usability, still the experiance is not as good as the iphone.
More than the scroll speed, the accidental click is a real pain...
Especially in scenarios like: Programs --> Add program and Weather Application --> Add city
Is there any better fix available... pls help.
+1 for me too. This is really really annoying, and actually I don't think anything in the Advanced Config tool makes the slightest bit of difference to this setting. I set 'scrolling' to disabled under TouchFlo settings of Advanced Config too, but I can still scroll and it's still exactly the same as before.
any ideas about this? i just flashed my rom to dutty's 3.4 (originally a 3.2) and in resco explorer, the scrolling was almost as smooth as an iphone but now it's too fast and sometime non-responsive. anyone know what setting can change this?
This worked for me.
Hi guys,
I was just installing the new Manila Controller add on, which comes with FTouchFlo (SL). With the FTouchFlo enabled, scrolling is back to how it should be for me
Where did you find the Manilla Controller app?
sh500 said:
Hi guys,
I was just installing the new Manila Controller add on, which comes with FTouchFlo (SL). With the FTouchFlo enabled, scrolling is back to how it should be for me
Click to expand...
Click to collapse
Yes. Where did you get the Manila app? I was searching for a way to only allow upon double click, but could not find anything in the settings.
It's the FTouchFlo that does the deal. The mentioned Manila Controller just encorporates a version of FTouchFlo to enable the upslide activation.
axelpix said:
It's the FTouchFlo that does the deal. The mentioned Manila Controller just encorporates a version of FTouchFlo to enable the upslide activation.
Click to expand...
Click to collapse
Yep that's right, just do a search on FTouchFlo (renamed to FTouchSL?)
Been there, got the t-shirt. FTouchFlo (the old, free version) runs and doesn't do much. Scrolling in native WM windows is still messed up.
Just flashed to latest ROM from Dutty and first thing I installed was FTouchFlo (via Manilla controller). Didn't test the scrolling before, but now, again every menu (native or otherwise) seems to be 'scrollable' for me.
Any other success stories with FTouchFlo? I installed and activated it, but it didn't do much.
I have used this setting to calm this finger flicking crazyness down:
HKLM\Software\OEM\TFLOSettings:
SpeedHigh: default value (25) <-- Change to (5) / SpeedLow : default value (70) <-- Chnge to (14) save and soft reset
Many custom ROMs are including the 5 and 14 setting respectively this makes it crazy fast when flicking with the finger. I suggest using default settings here or, in my case I use 25 for SpeedHigh and 50 for SpeedLow, wich does improve scrolling over default when using the finger but keeps the finger flick toned down. BTW, I've noticed that when flicking witht the finger the first flick engages SpeedLow and a second flick switches to SpeedHigh.
Is there a way to customize HTC Home? Like, can I change the look of it at all? Also, is there a way to make it finger scrollable, and also D-Pad scrollable? I know in some of the ROMs it's somewhat D-pad scrollable, but it seems to never work right.
I'd like to lower HTC Home to near the bottom of the screen (like Manilla) and make it more scrollable (like Manilla). I'd also like to customize the graphics, and possible add/remove icons.
Is there any way to do any of this? I know people are putting a ton of time into customizeng Manilla, but I would rather use HTC Home because of the whole landscape support thing.
Try Advance Config
Go here,
http://forum.xda-developers.com/showthread.php?t=470370
Scroll down to post #2 then download System Tools Cabs
It's a Zip file with all the system tools, and Advance Configuration is in there.
Once you install AC, run it, scroll to HTC home and unlock its position. This will enable it to scroll though, so if you have too many things on the home screen, the scroll bar will be on top of your htc home, make it looks ugly ~ but if you don't mind then try it out
finger scrollable?!!! You can use the Dpad, just press up or down untill one of the tap icon was selected, then press left or right to flip trough those taps... HTC Home is design to be light and fast ~ if you want all the complex M2D functions might as well just use M2D ~ sacrifice the buggy landscape mode.
-post removed- rant was here before(might come back) but im not sure what you mean. Do you mean by customizing HTC home changing the clock, tabs, etc.?
Well I was initially trying to make HTC Home look nicer- like M2D, and make it finger scrollable like M2D. I have since installed SPB Mobile Shell, and I no longer care about HTC Home.
I was just fed up with M2D and it's sluggish, buggy, no landscape, performance. M2D is nice to look at, and it is finger friendly as well. So I wanted to combine its looks, and its finger friendly operation, with the snappy performance and stability of HTC Home.
SPB Mobile Shell seems to do all of that, and plenty more...
well I found this http://www.touch-commander.com/
kaiserII101 said:
well I found this http://www.touch-commander.com/
Click to expand...
Click to collapse
Looks retty nice. Similar to SPB Mobile Shell:
http://www.spbsoftwarehouse.com/products/mobileshell/
Looks to be a little cheaper than Mobile Shell.