hi pple,
to continue the thread that seems nobody notice upgrade with sd card.
please make a dump of your BA with mtty:
Code:
USB>d2s 70020000 1060000 sd
and then host the dump please
thank you
Related
Dear all,
I dumped the OS, Extended ROM and Radio firmware to a SD card and
flashed succesfully other devices with it. Now I would like to be able to safe the contents of this SD card to an image file to be able to use my SD card again for other purposes...
I tried w/o any success the OSImageTool from the XDA-Tools, it does
not seem to recognize the image on the card. Nevertheless, it flashes fine to another device....
Is the structure of a QTEK9090 dump completely different so it's not recognized by the OSImageTool ? Is there another tool available for
this ? Or any other way to make a complete dump of the raw SD content ?
TIA,
Willem.
Use this tool to read/write to SD card
* I don't remember from where I download this tools
you can use ntrw ( posted above ) or psdwrite.
the structure is very different from the one used by the wallaby/xda1/osimagetool.
xda2(himalaya), xda3(blueangel), jam(magician), sp3(typhoon), and probably other new models too. all use a similar format,
you can use sdtool to extract the contents of an sdcard.
Is it possible to save the dead device with fine bootloader and even booting mix of ROMS?
Details of this are written here. What exactly should I download and perform?
http://forum.xda-developers.com/viewtopic.php?p=97195#97195
I have live Qtek 9090 with bootloader version 2.06 can I use it to perform backup/restore procedure with dead VPA III with 2.07 bootloader?
I have upgraded to wizard2ba_v2a_test ROM.
But now I could not copy any files into my BA device or SD Card on BA.
How can I do? Please help me, thanks.
post a description of error dude... no one can help you unless you explain the exact problem
Is it possible to flash BA with SD, and image on it. I try it and put BLUEIMG.nbf a stuck at white screen and it says "Serial". Help
Probably useless but *BUMP*. I have asked this before and never got a definitive answer or methodology.
Solution
I have a solution, it is good when you don't have USB cable like me.
1. Woking blue angel (with WM2003)
2. You need mtty
3. SD Card at least 64MB
Open mtty, put sd card in
Type:
Code:
USB>d2s 70020000 1060000 sd
It will take 4 minutes to complete dump.
Put SD in BA, go to bootloader.
Help
Can somebody use this method, and upload the dump so others can repair their BAs, I cant upload it becouse I dont have USB cable. Thanks
would love this...especially a wm 6.1 build
Come on people... Try it and UPLOAD...
Hi, this is my first post on this forum and i'm hoping to get some help to solve my problem.
I have an unlocked ATT treo 750 that i'm currently using with T-Mobile. I was happily running windows 5 and decided to try this new windows mobile 6.5 so i downloaded the rom from a thread on this forum and i ran the update process while my phone was connected to windows zync porgram, so it worked fine, but as soon as i rebooted my phone to the new windows 6.5 it gave me the
"This concludes de beta test of this software release...." now i try to reconnect my phone to my pc to zync and flash another rom but i won't recognize the connection.
what can i do, i know there is a way to flash a rom using your mini sd card but i'm not sure about this process....tell me if i have it right:
1. format your mini sd card using fat32, using a computer with a card reader (i can't format it using my phone cause of ovious reasons)
2. copy the rom image to the mini sd card on the root folder. the rom image should be in .nbh format. (i have a rom called CHEEIMG.nbh by Navenedrob)
3. re-insert the mini sd cad to the phone.....I DONT KNOW WHAT DO AFTER THIS, and what do you mean by HARD SPL or SPL... is it a file i should copy along with the CHEEIMG.nbh file in the mini sd card????
PLEASE HELP ME.. what buttons do i press on my treo 750 to trigger installation...?????
thanks
Hello there if you look a couple of threads down on main form page there's a post by Navenedrob who gives step by step instructions on how to sucessful complete the whole process
I did it about 2 weeks ago as a newbie and it very easy to follow very good update
Also make sure you download and use his WM6.5 ROM. No expiration date ...
hlopez said:
Hi, this is my first post on this forum and i'm hoping to get some help to solve my problem.
I have an unlocked ATT treo 750 that i'm currently using with T-Mobile. I was happily running windows 5 and decided to try this new windows mobile 6.5 so i downloaded the rom from a thread on this forum and i ran the update process while my phone was connected to windows zync porgram, so it worked fine, but as soon as i rebooted my phone to the new windows 6.5 it gave me the
"This concludes de beta test of this software release...." now i try to reconnect my phone to my pc to zync and flash another rom but i won't recognize the connection.
what can i do, i know there is a way to flash a rom using your mini sd card but i'm not sure about this process....tell me if i have it right:
1. format your mini sd card using fat32, using a computer with a card reader (i can't format it using my phone cause of ovious reasons)
2. copy the rom image to the mini sd card on the root folder. the rom image should be in .nbh format. (i have a rom called CHEEIMG.nbh by Navenedrob)
3. re-insert the mini sd cad to the phone.....I DONT KNOW WHAT DO AFTER THIS, and what do you mean by HARD SPL or SPL... is it a file i should copy along with the CHEEIMG.nbh file in the mini sd card????
PLEASE HELP ME.. what buttons do i press on my treo 750 to trigger installation...?????
thanks
Click to expand...
Click to collapse
Hi,
I'm sorry, I wrote that tutorial for people who couldn't use HARD SPL (A piece of software that lets you flash the phone) to get Windows Mobile 6.5.
Try formatting the memory card to FAT32 using a card reader, then from your computer, download the ROM here and paste it onto your memory card (ROM Link- http://forum.xda-developers.com/showthread.php?t=541417 ).
Load the memory card into the phone.
Where you've just loaded the memory card, there is a Reset button. It's tiny, and its located where the memory card slot is.
On the other side of the phone is the Media Button. It's the one below the volume buttons. Hold this button down and press the Reset key with your stylus.
The screen should load into the "Bootloader" mode and try to scan your memory card. If it recognises the CHEEIMG.NBH file, it will ask you to press the Call End key and then go on installing itself (I hope).
After saying all this, please note that I'm not an expert and had to experiment. I didn't however brick my phone with a Beta release so I'm giving you this in the hopes that it will work.
Just make sure you have the CHEEIMG.NBH file. It may have a different filename (anything that comes before .nbh), you just have to rename it.
Secondly make sure your card is formatted to FAT32. Google it if you don't understand or if you don't know how. I use a mac so formatting is easy.
Thirdly, familiarize yourself with starting up in Bootloader mode.
Have a play, I hope this helps.
eD
PLEASE I MEAN IT PLEASE. I searched all over the internet and nothing. Hard bricked s3 mini needs:
1. sdc file
2. sd card 16gb
3. a software that can burn sdc file to sd card and make it bootable
Im a newbie and i cant install and use ATF Box to make the SDC file so im kindly asking from anyone in here im desperate for GT-i8200 SDC file. If someone here who has the knowledge and the software to do this please make it and upload it somewhere! You will help a lot of people and Im going to donate you. IF SOMEONE HAS EVER DONE THIS ANY HELP WILL BE VERY APPRECIATED.
Also if you know any programs that can create SDC file please reply. Thanks a lot