I can't figure this out for some reason! It was an easy option on the AT&T Rom inside of the control panel, but no on this dutty rom
Thanks for any help
redsrule2500 said:
I can't figure this out for some reason! It was an easy option on the AT&T Rom inside of the control panel, but no on this dutty rom
Thanks for any help
Click to expand...
Click to collapse
did u try settings/personal/sliding sounds and uncheck the option there?
Mikulec said:
did u try settings/personal/sliding sounds and uncheck the option there?
Click to expand...
Click to collapse
That's what I mean - that's not there on my phone. I only have BUttons, Input, Large start menu, Lock, Menus, Owner info, Phone, Sounds and Notifications, and Today.
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab
From this tread: http://forum.xda-developers.com/showthread.php?t=357798
Wich you would have found if you just had searched for keyboard and sound. Digg then ask
redsrule2500 said:
That's what I mean - that's not there on my phone. I only have BUttons, Input, Large start menu, Lock, Menus, Owner info, Phone, Sounds and Notifications, and Today.
Click to expand...
Click to collapse
Just a suggestion(dont know if it wont mess something up, so make a backup of the registry):
delete everything in HKLM\Software\HTC\SlidingSound
Mikulec said:
Just a suggestion(dont know if it wont mess something up, so make a backup of the registry):
delete everything in HKLM\Software\HTC\SlidingSound
Click to expand...
Click to collapse
That will seal the deal alright but worky if he for some reason wants it back on, then its bether to use the configurator who does it for you. But yeh, that will silence the sliding sound.
Dutty also have a cab, search for it. I think its called duttys sliding sound fix cab.
raiisak said:
Dutty also have a cab, search for it. I think its called duttys sliding sound fix cab.
Click to expand...
Click to collapse
The funny thing is I used a lot of duttys roms but I never realized that there is no slidingsound option on settings.
i always turn mine off with duttys roms its in settings just like it has always been
Related
After searching the Kaiser section for this topic, I could not find any answer or solution!
Any assistance as for the device to run such sound theme either it is an application conflict or some reg. glitch!!
Any help?
This came from a Hermes addon, but it seems to work just fine for me on the Tilt. Just make sure you soft reset after installation to enable the sound changes.
motionmind said:
This came from a Hermes addon, but it seems to work just fine for me on the Tilt. Just make sure you soft reset after installation to enable the sound changes.
Click to expand...
Click to collapse
You mean to say that this brand new device is bugged?!
Cyber-mate said:
You mean to say that this brand new device is bugged?!
Click to expand...
Click to collapse
No, it just doesn't make the start menu sounds because they didn't set it up to do so from the factory. There's no place to change this manually in WM6 that I've found anyway.
motionmind said:
No, it just doesn't make the start menu sounds because they didn't set it up to do so from the factory. There's no place to change this manually in WM6 that I've found anyway.
Click to expand...
Click to collapse
Thanks anyways...
Menu Sounds in WM6
Hi All - Is there a way to turn off the sounds once the cab has been installed. (I'm a control freak!)
Cyber-mate said:
You mean to say that this brand new device is bugged?!
Click to expand...
Click to collapse
OT, but why is it so surprising that a "brand new device" could be "bugged"? Isn't it far more likely and acceptable for there to be a few bugs on a brand new device, rather than one that's been out for some time and not been fixed?
It's not a bug unless it annoys you.
Yes... also MS doesn't come with update's for Windows because everything is ok
I think it's a bug, otherwise sound should work.
I searched and found a ton of "How do I customize the sliding keyboard sounds". But I am running Alex's multimedia ROM, and for the life of me can't figure out how to get the stock sliding keyboard sound back on my Tilt. I don't even have the option to turn it on in my settings anymore. It just appears to be gone.
Am I missing a setting? If not, is there a .cab to reinstall the sliding sounds option?
Thanks
over2land said:
I searched and found a ton of "How do I customize the sliding keyboard sounds". But I am running Alex's multimedia ROM, and for the life of me can't figure out how to get the stock sliding keyboard sound back on my Tilt. I don't even have the option to turn it on in my settings anymore. It just appears to be gone.
Am I missing a setting? If not, is there a .cab to reinstall the sliding sounds option?
Thanks
Click to expand...
Click to collapse
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab
over2land said:
I searched and found a ton of "How do I customize the sliding keyboard sounds". But I am running Alex's multimedia ROM, and for the life of me can't figure out how to get the stock sliding keyboard sound back on my Tilt. I don't even have the option to turn it on in my settings anymore. It just appears to be gone.
Am I missing a setting? If not, is there a .cab to reinstall the sliding sounds option?
Thanks
Click to expand...
Click to collapse
Try this CAB.
SH4YD33 said:
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab
Click to expand...
Click to collapse
Thanks, but isn't that to modify existing sounds?
wpbear said:
Try this CAB.
Click to expand...
Click to collapse
WP, that did it. Thanks. I did notice a slow down in regen when the screen is going from portrait to landscape though. However, I end up with the link in settings/personal, and the same sounds I had before I flashed.
I am using Alex ATT MM 1.6 and the sounds work too, but I dont see the link in settings/personal.
EDIT: Reboot and found it.
hello seniors,
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab this file does what? is it the software that allows the phone play a sound when opens and closes? OR is it configure the sound of the sliding keyboard? if i hd the software of keyboard sliding sound built in when i got this phone do i need to install this .cab? thanks
ysw
total noob needs help with missing sliding sounds.
Hi I just downloaded the Tilt_SlidingSounds.CAB.
I then unzipped it on my computer and moved the folder containing the filles to my Vario III and put it in the windows folder. Using file explorer I found the folder opened it and hit setup. it worked but the sliding keyboard sound tweaker was placed in the windows folder too. So not saticefied with this I moved over the whole zip file to my phone and put it in my personal folder where I exicuted the cab. owever I could still only find it near the bottom of the windows folder and I want it in the settings/personal where my original one used to be before the phone got sent off for repair.
Although this tweaker works it only has 3 sounds to choose from. Is this right too?
Please give advice to all of this I am eager to learn and am still searching through the FAQs
Thanks
Hansaw
Hi
I made this little CAB to install the registry tweaks that prevent your screen from blanking. I can confirm that on my Orange Diamond, using Bepe's .97 this actually works, whereas using Advanced Config didn't solve the issue.
The CAB file is uninstallable should you wish to remove it.
Thanks,
Shinobi_UK
Can you explain what´s in that cab?
shinobi_uk said:
Hi
I made this little CAB to install the registry tweaks that prevent your screen from blanking. I can confirm that on my Orange Diamond, using Bepe's .97 this actually works, whereas using Advanced Config didn't solve the issue.
The CAB file is uninstallable should you wish to remove it.
Thanks,
Shinobi_UK
Click to expand...
Click to collapse
Nothing new here...
You could also easily do it with Diamond Tweak
MonteCristoffOn said:
Nothing new here...
You could also easily do it with Diamond Tweak
Click to expand...
Click to collapse
Actually i found that using DT didn't work either, and I also find it more convenient to apply the registry changes with a cab file, rather than having to install an app I don't use and then make a load of clicks.
If you prefer to do it using a tweaking app then this cab isn't for you. The only reason I posted it is because I use it myself.
horstborsch said:
Can you explain what´s in that cab?
Click to expand...
Click to collapse
Four registry tweaks, and a text file. Nothing sinister.
shinobi_uk said:
Actually i found that using DT didn't work either
Click to expand...
Click to collapse
It works for everybody... even on all bepe's ROMs.
and I also find it more convenient to apply the registry changes with a cab file, rather than having to install an app I don't use and then make a load of clicks.
If you prefer to do it using a tweaking app then this cab isn't for you. The only reason I posted it is because I use it myself.
Click to expand...
Click to collapse
If so, good luck for making cab for each Diamond tweak...
Cheers.
MonteCristoffOn said:
It works for everybody... even on all bepe's ROMs.
Click to expand...
Click to collapse
Well i applied the tweaks and my screen still went blank when calls connected, I'm happy to test it again as I may have been using an older version.
If so, good luck for making cab for each Diamond tweak...
Cheers.
Click to expand...
Click to collapse
Well actually it's been very easy to achieve by taking registry snapshots, and then using diff on a linux box to find the changes, then import them into a cab file.
So thanks for wishing me luck but it's not required.
Sarcasm breeds sarcasm and frankly i'm slightly ammused that on a forum designed to help users share tips and software, a simple CAB i use after new ROM flashes has created such a hostile response.
I'm not attempting to replace or belittle your tool monte, it's certainly streets ahead of what i can do at the moment, however as bepe's ROM lets me run cabs at build this way is nice and easy for me to ensure that if I need to do a hard reset I can reinstate my registry tweaks during the reset without having to install any additional software.
What's so bad about the screen blanking out during a call?
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
I find it annoying to have to unblank the screen to use the keypad for things like phone banking and voicemail.
The registry tweaks in Advanced Config did not work on my phone either, but this cab did the job. Thanks shinobi_uk
THIS is effing amazing
Been looking for something like this for a looong time, cheers
Brilliant, I'd tried the registry tweaks in the tweaks thread, and advancedconfig without any luck and this cab worked perfectly.
I haven't tried DiamondTweak, looks interesting though.
This works perfectly. Big Thanks!
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
Have you tried to dial a requested code with a blank screen?
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
It's not that bad, it just annoys me when I'm phoning numbers where you have a number menu system to get through.
It's strange that it's something no other WM phones I've used have done, yet theres no menu option to disable it.
shinobi_uk said:
I find it annoying to have to unblank the screen to use the keypad for things like phone banking and voicemail.
Click to expand...
Click to collapse
here here...me too
This CAB file is flawed, because it causes unnecessary battery drain.
It's wrong to make the screen never go to sleep during a phone call.
If you'll think about it for a moment, during a call we never really need the screen to be active for more than 1 minute or so, from the last time we touched it. If you are calling a digital voice machine (either your voicemail or anything), 99.999% of the time it won't take more than 1 minute between key presses.
The ideal tweak should just make the screen behave like when you're not in a call, meaning the screen reduces brightness after ~30 seconds, and shuts down after ~1 minute. In order to be 100% on the safe side, you could make it shut down after 2 minutes from last key press. BUT, making it never go to sleep is simply a waste of battery if you're doing for example a 30 minutes conversation.
center button and screen back on
My preference is to have the screen come on, see who it is, then allow it to go blank. If you need it to come back on, i just push the center of the scroll, enter button or whatever its called, and the screen comes back on. (at least it does on mine) . I like it that the screen blanks so it will save battery.
But i dont think we should discourage anyone from making any kind of cab if they desire.
My preference is to have the screen come on, see who it is, then allow it to go blank. If you need it to come back on, i just push the center of the scroll, enter button or whatever its called, and the screen comes back on. (at least it does on mine) . I like it that the screen blanks so it will save battery.
Click to expand...
Click to collapse
Still, it is unnoying to press that damn key every 5 seconds. The screen should shut down after 1-2 minutes, but NOT never.
Noam23 said:
This CAB file is flawed, because it causes unnecessary battery drain.
It's wrong to make the screen never go to sleep during a phone call.
Click to expand...
Click to collapse
Thats abosolute BS. It is NOT flawed. If you dont want your screen to stay on just - dont use the CAB. I think most users around here are smart enought to know that keeping the screen on during a call takes a battery hit. If they use the CAB as I intend to they are willing to accept this.
Any program that does that?
I remember being able to disable this on the Kaiser with the Kaisertweak.
BUMP! BUMP!
Hi:
I am just curious, why would someone need to use the keyboard while the phone is asleep?
Thanks!
I put in the same request...
Having the phone in your pocket may to weird things if it wakes up on keyboard slide (you need not to slide it out completely to wake it up...).
I have a question...how to disable auto rotation while qwerty slideout?
cincy1020 said:
Hi:
I am just curious, why would someone need to use the keyboard while the phone is asleep?
Thanks!
Click to expand...
Click to collapse
Haha I'm not trying to use the keyboard while the phone is asleep. Sometimes it slides open a bit when its inside my pocket making the phone turn on.
LOL, okay, that makes sense.
Bump!
Bump!
It's the exact same cab file that you use for the Tilt. quit bumping and go try things instead of just asking With that I leave you with a link to the search button.
http://forum.xda-developers.com/search.php
Solved
http://forum.xda-developers.com/showpost.php?p=2945249&postcount=3
laakness said:
It's the exact same cab file that you use for the Tilt. quit bumping and go try things instead of just asking With that I leave you with a link to the search button.
http://forum.xda-developers.com/search.php
Click to expand...
Click to collapse
Who said I used a cab?
tyguy said:
Solved
http://forum.xda-developers.com/showpost.php?p=2945249&postcount=3
Click to expand...
Click to collapse
Thanks!
This is a very obviously stupid recommendation.
First because nobody would do that, unless they would like to brick their device.
It's always better to ask before to "experts"..., yes "experts".
No offense.
http://www.nuerom.com/BlogEngine/page/nueKBLight.aspx
that has the option in it as well, as well as the option to keep the keyboard light on. also it lets you switch the SIP when changing(so you can use Null keyboard in Landscape if you want)
Hello, im using miri 8.1 premium and i want to remove the "slide down for more options" when i make a call... is this possible??
+1 i hate it!
+1, i really don't like it
yes! Me too, it is the most useless junk ever thought by the HTC ppl! It is annoying, please someone please help us remove it!
And why don't you ask miri for it in is thread instead opening a new one???
speed200 said:
And why don't you ask miri for it in is thread instead opening a new one???
Click to expand...
Click to collapse
Because its not just in Miri's rom, its in more or less all of them now
I want it back to my ROM badly. where is the cab?
+1
i also do not need it, and would like to know how to turn it off
+1.
Its a pain to mute/un-mute during conf calls with this on.
Anyone?
For those users interested to find a solution to disable the curtain, here is the package. Could be a dll or a registry key.
Found a solution
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
sank27 said:
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
Click to expand...
Click to collapse
Maybe you can set it to 0 (zero) to disable it?
kwbr said:
Maybe you can set it to 0 (zero) to disable it?
Click to expand...
Click to collapse
i tried that actually but it still show up
i also tried to delete the whole key "cover"
no luck
solaris10 said:
I want it back to my ROM badly. where is the cab?
Click to expand...
Click to collapse
Me too. any cab availabale?
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
contact managment sux on the standard one
and in-call options are better on the new ones
tiburone said:
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
Click to expand...
Click to collapse
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
Click to expand...
Click to collapse
I had zero issue with the standard one, it was functional and did exactly as one would expect. Topaz dialer hides all options instantly making it absolutely dangerous to try and activate loudspeaker whilst driving . The other issue is landscape view, if using any rotate screen app and having the device in landscape (ie. whilst using GPS apps etc) and receiving a call there is no dialer shown at all!
Surely I am not the only one to notice these problems?
thanks man it helped
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Click to expand...
Click to collapse
thank's. I'll try that - it looks ok.
But no i have a problem - remove the curtain...