Shaking the Diamond (Working) - Touch Diamond, MDA Compact IV General

Hey there...
I was looking throug the Regs of my Diamond and under HLM/Drivers/BuiltIn/GSensor there is a Value called "EnableShaking".
Mine was set to "0" and therefore problebly "Off"
I gues you can shake youre Diamond to switch something on or off!
Does anyone have an idea of what this can be use for and i we could find some cool funktions for that?
Chears...
Edit:
Theck this out freinds...
http://forum.xda-developers.com/showthread.php?t=406769
All credits to "sushilange"
Thanks alot

this will be a nice one...did you try it?
007 said about his martini "shaken not stirred". we also want our diamond shaken!

does nothing...

I ofcause tried swithing it ON be setting the Dword to "1" and I've been shaking it for ours but i cant find any programs or settings like sound that get affected be the shaking... But maybe some of the developers could find a use for it?
Chears...

Search and search !
Check here m8 !
http://forum.xda-developers.com/showthread.php?t=403939

maybe its for win mob7?
anyone remember the demo where the shake the phone to resume from standby?

eurorpeen said:
Check here m8 !
http://forum.xda-developers.com/showthread.php?t=403939
Click to expand...
Click to collapse
I know of this app and allready have it installed, but dosn't have any shake funktions...
Chears...

Hornet331 said:
maybe its for win mob7?
anyone remember the demo where the shake the phone to resume from standby?
Click to expand...
Click to collapse
If it works on a WM7 demo we should be able to get it working...

the sony ericsson w910iis where you can shake it changes songs and goes thru messages.
that would be cool on the diamond

Sad to say that this tread is dead...
I gues its not a funktion worth exploring...

zme999 said:
Hey there...
I was looking throug the Regs of my Diamond and under HLM/Drivers/BuiltIn/GSensor there is a Value called "EnableShaking".
Mine was set to "0" and therefore problebly "Off"
I gues you can shake youre Diamond to switch something on or off!
Does anyone have an idea of what this can be use for and i we could find some cool funktions for that?
Chears...
Click to expand...
Click to collapse
its may be for step counter in the other hand, a calorimeter or step counter software working with Gsensor would be great,

Someone found the use for shaking the Diamond
Tjeck the first post
Thanks to "sushilange"
All the credits goes to him, buy him coffee

what about shake to unlock?
Is it possible to connect it 2 slide2 unlock

Related

Keypad vibrate*UPDATED FOR 6.1*10-07-08

This .cab will create a short vibrate everytime you press a number when dialing a number.
***this is the updated version. Will only work on 6.1***
please report any problems.
I have noticed a quicker response time, i might be crazy to.
**for people with problems getting the error, install the second one**
Confirmed working on....
L26KDV12------------OUTSTANDING RESPONSE
HYPERDRAGONIIIPRO--SLIGHT DELAY BUT GOOD
ATT 6.0--WORKS DECENT
ATT 6.1--SUCKS ASS BUT WORKS
hey i just tryed the Cab Works great thanx!!!! =D
RussianTechno101 said:
hey i just tryed the Cab Works great thanx!!!! =D
Click to expand...
Click to collapse
Not a problem, ever since my wife got the motorola z9 it has tactile response (vib when button pressed) i thought it would be great for the tilt. I always miss a number using the dialer.
Perhaps the updated video drivers will provider a better response time on the touch screen...
*sigh* hope HTC actually follows through, otherwise I may lean a bit more toward another manufacturer next time (I like playing games during lunch breaks, and when i take the train -- most game's i've found, even basic ones that run on my T-Mobile Wing (HTC Herald), fail on the tilt :-(
KD8DNS said:
This .cab will create a short vibrate everytime you press a number when dialing a number.
Click to expand...
Click to collapse
Nice bro. You go from being banned for a week and come back with an app. To the mods, ban this guy some more. No telling what he will come back with.
J/K
P1Tater said:
Nice bro. You go from being banned for a week and come back with an app. To the mods, ban this guy some more. No telling what he will come back with.
J/K
Click to expand...
Click to collapse
i also created the voice command announcement fix, it fixes the problem of msvc 1.6 not announcing calls on the tilt. link here http://forum.xda-developers.com/showthread.php?t=388964
hey, so do the short or long tones need to be on? as i have them turned off and the vibrate feature doesn't work.
krkonose said:
hey, so do the short or long tones need to be on? as i have them turned off and the vibrate feature doesn't work.
Click to expand...
Click to collapse
long, and if that dosn't work let me know what rom, and dialer your using and ill do some troubleshooting. and are you sure the cab installed and.
Hey, I downloaded it and installed it but it wont work. I also noticed that when I punch in a number on the keypad, there is no tone. what should I do?
Thanks
I am using
RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
WM 6.1
Thanks
KD8DNS said:
This .cab will create a short vibrate everytime you press a number when dialing a number.
Click to expand...
Click to collapse
...and this one should remove it!
tnyynt said:
...and this one should remove it!
Click to expand...
Click to collapse
thank you very much for that.
What is the difference between this vibrate keypad CAB and the previously released vibrate keypad CAB (as seen in this thread) ???
Charles
polyrhythmic said:
What is the difference between this vibrate keypad CAB and the previously released vibrate keypad CAB (as seen in this thread) ???
Charles
Click to expand...
Click to collapse
HA HA HA. Wow looks like someone else had the same idea about 3 years ago. Boy did i waste my time. But i guess to answer your question .zip vs .cab other than ripping it apart to inspect how it was written, and it was posted in the Magician forum. Oh well i guess i wasted my time, but on the other hand i hope people found it useful.
Argh, for me, nothing work, no vibrate, no sound.
yeantbron said:
Argh, for me, nothing work, no vibrate, no sound.
Click to expand...
Click to collapse
make sure dtmf short tones are on.
oups...sorry, sometimes, i'm very stupid lol
Thank you !!!
Hey this cab works great for me. Is there anything that will produce the same type of feedback for the soft keyboard? Or would that depend on the sip?
elypsar said:
Hey this cab works great for me. Is there anything that will produce the same type of feedback for the soft keyboard? Or would that depend on the sip?
Click to expand...
Click to collapse
Let me do a little reasearch.
I appreciate it!
KD8DNS said:
Let me do a little reasearch.
Click to expand...
Click to collapse
Any news on this at all?

Pac Man G-Sensor Game?

i am no good with programing, but if anyone fancys making my idea a reality please do!
Pac Man for the Diamond with g-sensor support, this would be awesome!
Anybody agree?
Many games like pacman could be enjoyed using g-sensor if someone were to implement a gsensor app that could sit in the background and change movement in to left/right/up/down keys on the dpad.
i will be looking in to this, allthough i have never done anything with wm6 ever. i think using the gsensor for l/r/u/d buttons is quite usefull =)
so... dont expect anything comming from my side too early
here's gsen pacman http://www.fuzemobility.com/more-gsen-game-goodies/
bugsykoosh said:
here's gsen pacman http://www.fuzemobility.com/more-gsen-game-goodies/
Click to expand...
Click to collapse
Good game, it's a shame the download link doesn't work anymore
They must have just pulled it (I downloaded it a few days ago myself). Since it's freeware I've uploaded it here as well. You just need to add GPad and change the config now.
bugsykoosh said:
They must have just pulled it (I downloaded it a few days ago myself). Since it's freeware I've uploaded it here as well. You just need to add GPad and change the config now.
Click to expand...
Click to collapse
Thank's for the link!
To other people who would like to play this game with tilt sensor (I take no credit for this, just making it easier for others), do the following:
Download Virtual D-Pad (credit to Tirinoarim) Install it.
Download the attached Config.zip file, unzip it and move it to Program Files/GPad and overwrite the config file you have in there.
Start GPad navigate to PacMan start it , enjoy
Just one thing maybe bugsykoosh can answer this, how to stop Diamond going to sleep during the game, becouse if you use nav keys it's ok, but if you play only with gsensor it starts to sleep after your preseted time in diamond?
p.brazauskas said:
Thank's for the link!
To other people who would like to play this game with tilt sensor (I take no credit for this, just making it easier for others), do the following:
Download Virtual D-Pad (credit to Tirinoarim) Install it.
Download the attached Config.zip file, unzip it and move it to Program Files/GPad and overwrite the config file you have in there.
Start GPad navigate to PacMan start it , enjoy
Just one thing maybe bugsykoosh can answer this, how to stop Diamond going to sleep during the game, becouse if you use nav keys it's ok, but if you play only with gsensor it starts to sleep after your preseted time in diamond?
Click to expand...
Click to collapse
Sorry- but I don't know how to fix the sleep issue. I tap the screen every 30 seconds. it's essentially going to sleep when your screen timeout is set. For some reason GPad does not register as an actual keypress so it doesn't keep the screen awake. There's nothing in Pacman's registry that can be toggled. if you find another free version of Pacman (they are out there) all you need to do is change the line in the config to match the name of the .exe and it should work for that pacman as well.
And thanks for the step by step - I'm sure that helps a lot of people. I was being lazy
Help?
i got pacman working wiht normal buttons but i want to make GPad work it doesnt move pacman when i tilt my phone
p.brazauskas said:
Just one thing maybe bugsykoosh can answer this, how to stop Diamond going to sleep during the game, becouse if you use nav keys it's ok, but if you play only with gsensor it starts to sleep after your preseted time in diamond?
Click to expand...
Click to collapse
i have found an application what can keep your mobile online, so now you dont have to tap the display every 30s
Code:
http://www.freewarepocketpc.net/ppc-download-dont-sleep.html

NoSleep!!.CAB - Stops the screen blanking during calls - WORKS!! [02/08/2008]

Hi
I made this little CAB to install the registry tweaks that prevent your screen from blanking. I can confirm that on my Orange Diamond, using Bepe's .97 this actually works, whereas using Advanced Config didn't solve the issue.
The CAB file is uninstallable should you wish to remove it.
Thanks,
Shinobi_UK
Can you explain what´s in that cab?
shinobi_uk said:
Hi
I made this little CAB to install the registry tweaks that prevent your screen from blanking. I can confirm that on my Orange Diamond, using Bepe's .97 this actually works, whereas using Advanced Config didn't solve the issue.
The CAB file is uninstallable should you wish to remove it.
Thanks,
Shinobi_UK
Click to expand...
Click to collapse
Nothing new here...
You could also easily do it with Diamond Tweak
MonteCristoffOn said:
Nothing new here...
You could also easily do it with Diamond Tweak
Click to expand...
Click to collapse
Actually i found that using DT didn't work either, and I also find it more convenient to apply the registry changes with a cab file, rather than having to install an app I don't use and then make a load of clicks.
If you prefer to do it using a tweaking app then this cab isn't for you. The only reason I posted it is because I use it myself.
horstborsch said:
Can you explain what´s in that cab?
Click to expand...
Click to collapse
Four registry tweaks, and a text file. Nothing sinister.
shinobi_uk said:
Actually i found that using DT didn't work either
Click to expand...
Click to collapse
It works for everybody... even on all bepe's ROMs.
and I also find it more convenient to apply the registry changes with a cab file, rather than having to install an app I don't use and then make a load of clicks.
If you prefer to do it using a tweaking app then this cab isn't for you. The only reason I posted it is because I use it myself.
Click to expand...
Click to collapse
If so, good luck for making cab for each Diamond tweak...
Cheers.
MonteCristoffOn said:
It works for everybody... even on all bepe's ROMs.
Click to expand...
Click to collapse
Well i applied the tweaks and my screen still went blank when calls connected, I'm happy to test it again as I may have been using an older version.
If so, good luck for making cab for each Diamond tweak...
Cheers.
Click to expand...
Click to collapse
Well actually it's been very easy to achieve by taking registry snapshots, and then using diff on a linux box to find the changes, then import them into a cab file.
So thanks for wishing me luck but it's not required.
Sarcasm breeds sarcasm and frankly i'm slightly ammused that on a forum designed to help users share tips and software, a simple CAB i use after new ROM flashes has created such a hostile response.
I'm not attempting to replace or belittle your tool monte, it's certainly streets ahead of what i can do at the moment, however as bepe's ROM lets me run cabs at build this way is nice and easy for me to ensure that if I need to do a hard reset I can reinstate my registry tweaks during the reset without having to install any additional software.
What's so bad about the screen blanking out during a call?
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
I find it annoying to have to unblank the screen to use the keypad for things like phone banking and voicemail.
The registry tweaks in Advanced Config did not work on my phone either, but this cab did the job. Thanks shinobi_uk
THIS is effing amazing
Been looking for something like this for a looong time, cheers
Brilliant, I'd tried the registry tweaks in the tweaks thread, and advancedconfig without any luck and this cab worked perfectly.
I haven't tried DiamondTweak, looks interesting though.
This works perfectly. Big Thanks!
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
Have you tried to dial a requested code with a blank screen?
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
It's not that bad, it just annoys me when I'm phoning numbers where you have a number menu system to get through.
It's strange that it's something no other WM phones I've used have done, yet theres no menu option to disable it.
shinobi_uk said:
I find it annoying to have to unblank the screen to use the keypad for things like phone banking and voicemail.
Click to expand...
Click to collapse
here here...me too
This CAB file is flawed, because it causes unnecessary battery drain.
It's wrong to make the screen never go to sleep during a phone call.
If you'll think about it for a moment, during a call we never really need the screen to be active for more than 1 minute or so, from the last time we touched it. If you are calling a digital voice machine (either your voicemail or anything), 99.999% of the time it won't take more than 1 minute between key presses.
The ideal tweak should just make the screen behave like when you're not in a call, meaning the screen reduces brightness after ~30 seconds, and shuts down after ~1 minute. In order to be 100% on the safe side, you could make it shut down after 2 minutes from last key press. BUT, making it never go to sleep is simply a waste of battery if you're doing for example a 30 minutes conversation.
center button and screen back on
My preference is to have the screen come on, see who it is, then allow it to go blank. If you need it to come back on, i just push the center of the scroll, enter button or whatever its called, and the screen comes back on. (at least it does on mine) . I like it that the screen blanks so it will save battery.
But i dont think we should discourage anyone from making any kind of cab if they desire.
My preference is to have the screen come on, see who it is, then allow it to go blank. If you need it to come back on, i just push the center of the scroll, enter button or whatever its called, and the screen comes back on. (at least it does on mine) . I like it that the screen blanks so it will save battery.
Click to expand...
Click to collapse
Still, it is unnoying to press that damn key every 5 seconds. The screen should shut down after 1-2 minutes, but NOT never.
Noam23 said:
This CAB file is flawed, because it causes unnecessary battery drain.
It's wrong to make the screen never go to sleep during a phone call.
Click to expand...
Click to collapse
Thats abosolute BS. It is NOT flawed. If you dont want your screen to stay on just - dont use the CAB. I think most users around here are smart enought to know that keeping the screen on during a call takes a battery hit. If they use the CAB as I intend to they are willing to accept this.

Display during phone calls

Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
hotdog53 said:
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
Click to expand...
Click to collapse
u need to install advanced confog tool from Schaps, there is an option to disable device sleep while on call.
CSD connection
The screen also turns itself off when I use a CSD connection for internet access on my device. I assume it's because the phone thinks I'm making a regular phone call, so it turns the display off.
I found that if I load up tomtom in the background, the screen stays on, but after a while, the screen starts to turn itself off for about a second every few seconds, so it has only worked as a temporary solution.
I will give the advanced config tool a try. ty
IDK know about advanced config, but kaiser tweak is a nifty little program to change a lot of settings
Advanced config is just about the same as KaiserTweak.
I think kaiser tweak has a few more options now. I had advanced config on a couple of roms i flashed and i think kaiser tweak is a little more encompassing as far and the number of features you can tweak.
dsoler702 said:
I think kaiser tweak has a few more options now. I had advanced config on a couple of roms i flashed and i think kaiser tweak is a little more encompassing as far and the number of features you can tweak.
Click to expand...
Click to collapse
u should know that Nikagl made some "upgrade" to advanced config tool so it has almost the same tweaks as kaiser tweak.
start-settings-battery power (uncheck the box) -but that will make ur screen on even in other apps, when recieved other texts...etc
out of curiosity - why do u need ur screen on?
hotdog53 said:
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
Click to expand...
Click to collapse
jahrami said:
start-settings-battery power (uncheck the box) -but that will make ur screen on even in other apps, when recieved other texts...etc
out of curiosity - why do u need ur screen on?
Click to expand...
Click to collapse
I prefer having the screen on regardless where I am. All boxes are unchecked>oower, backlight,etc.
but the damn thing goes off after a few seconds when I make a phone call and the keypad can't be seen to press a number when prompted to do so. When I want the screen off, I use psshutXP (light off)
How can I get the advanced configuration tool?!
Thx!!
Get it HERE
hotdog53 said:
I prefer having the screen on regardless where I am. All boxes are unchecked>oower, backlight,etc.
but the damn thing goes off after a few seconds when I make a phone call and the keypad can't be seen to press a number when prompted to do so. When I want the screen off, I use psshutXP (light off)
How can I get the advanced configuration tool?!
Thx!!
Click to expand...
Click to collapse
The advanced config tool should have been the first thing to try. Very helpful app.
Mikulec said:
The advanced config tool should have been the first thing to try. Very helpful app.
Click to expand...
Click to collapse
o.k I have the advanced config tlool installed on my kaiser/tilt. What do I do to keep the screen from going off during phone calls?
Thx!
hotdog53 said:
o.k I have the advanced config tlool installed on my kaiser/tilt. What do I do to keep the screen from going off during phone calls?
Thx!
Click to expand...
Click to collapse
I found out how, but after disabling phone sleep and fast sleep, the screen still goes off when using the phone. Does anyone have a registry tweak to keep the screen ON when using the phone?!
Thx!
hotdog53 said:
DISREGARD. I found out how.
Thx everyone!
Click to expand...
Click to collapse
ur welcome.
hotdog53 said:
I found out how, but after disabling phone sleep and fast sleep, the screen still goes off when using the phone. Does anyone have a registry tweak to keep the screen ON when using the phone?!
Thx!
Click to expand...
Click to collapse
I found a registry tweak that resolved this issue. It works!!!!
HKLM/Drivers/Built-In/RIL>Enable Fast Dormant Display During Call....Change value from 1 to 0. Soft reset. The display will stay on during a call!
Now I have another issue that a search didn't help. When I'm on the internet and using the stylus to scroll down the page, the scrolling slows down to nearly a stop just a very short ways down the page!!
Can someone pls help me with this?
Thx!
hotdog53 said:
I found a registry tweak that resolved this issue. It works!!!!
HKLM/Drivers/Built-In/RIL>Enable Fast Dormant Display During Call....Change value from 1 to 0. Soft reset. The display will stay on during a call!
Now I have another issue that a search didn't help. When I'm on the internet and using the stylus to scroll down the page, the scrolling slows down to nearly a stop just a very short ways down the page!!
Can someone pls help me with this?
Thx!
Click to expand...
Click to collapse
Here's a screenshot of the phone stay awake tweak.

"slide down for more options"

Hello, im using miri 8.1 premium and i want to remove the "slide down for more options" when i make a call... is this possible??
+1 i hate it!
+1, i really don't like it
yes! Me too, it is the most useless junk ever thought by the HTC ppl! It is annoying, please someone please help us remove it!
And why don't you ask miri for it in is thread instead opening a new one???
speed200 said:
And why don't you ask miri for it in is thread instead opening a new one???
Click to expand...
Click to collapse
Because its not just in Miri's rom, its in more or less all of them now
I want it back to my ROM badly. where is the cab?
+1
i also do not need it, and would like to know how to turn it off
+1.
Its a pain to mute/un-mute during conf calls with this on.
Anyone?
For those users interested to find a solution to disable the curtain, here is the package. Could be a dll or a registry key.
Found a solution
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
sank27 said:
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
Click to expand...
Click to collapse
Maybe you can set it to 0 (zero) to disable it?
kwbr said:
Maybe you can set it to 0 (zero) to disable it?
Click to expand...
Click to collapse
i tried that actually but it still show up
i also tried to delete the whole key "cover"
no luck
solaris10 said:
I want it back to my ROM badly. where is the cab?
Click to expand...
Click to collapse
Me too. any cab availabale?
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
contact managment sux on the standard one
and in-call options are better on the new ones
tiburone said:
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
Click to expand...
Click to collapse
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
Click to expand...
Click to collapse
I had zero issue with the standard one, it was functional and did exactly as one would expect. Topaz dialer hides all options instantly making it absolutely dangerous to try and activate loudspeaker whilst driving . The other issue is landscape view, if using any rotate screen app and having the device in landscape (ie. whilst using GPS apps etc) and receiving a call there is no dialer shown at all!
Surely I am not the only one to notice these problems?
thanks man it helped
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Click to expand...
Click to collapse
thank's. I'll try that - it looks ok.
But no i have a problem - remove the curtain...

Categories

Resources