HI. I install new clock as cab(diamond look) and manila couldent start - it's showing Tap here to start, I'm taping and nothing happend. After deleting clock Manila 2D start fine.
Any solution?
If you used the manilla customiser to set the new clock then try going back to the original theme. I have seen this problem. The customiser is still in beta so issues like this (if it is the customiser) are to be expected.
Tony
I don't using manilla customiser. Clock wouldent start. Even after puting new rom - weird
You might be better off posting this in the Manilla 2D Skins thread, and not in a Kaiser specific section.
Did you disable touchflo before installing the clock?
check this post
http://forum.xda-developers.com/showpost.php?p=2797361&postcount=6357
There is a fix for this in the development category, from the main page. It's in the Manilla 2d clock/theme thread. It took me a day or so to sort through the whole thread, but there's a cab in there you can use. You stop 2d, run the cab, install the new clock, and reenable 2d. worked like a charm for me running HyperDragon III.
searching searching and no find
Ok. I'v got it. If someone have problem with adding clock here is fix
http://forum.xda-developers.com/showpost.php?p=2782882&postcount=6017
... edited ...
solved?
hi,
first of all i know this rom is not for kaiser. it is for prophet. but prophet users are not as many as kaiser users and my problem also looks like kaiser prob.. in that rom as you see htc home plugin for kaiser is installed as default. and backgrouns is not transparent it is grey or black. when i change theme from black to white ones. my prophet doesnt look good with grey background. i try hhc v1.0 but it didnt work with that plugin.
anyone knows that how to transparate it
tnx
I have Manila 2D working quite well on my kaiser... The only problem is the clock. Whenever I try to put a new clock/theme on the home tab and I take off the analog clock with M2DC, my digital clock stacks the numbers ontop of one another on the right-hand side of my phone. Anyone know why this keeps happening to me?
Same Issue
My clock is doing the same thing. When i remove the analog clock from the Home XML tab in M2D Customizer, my clock goes off to the far right hand side of the s creen? Is this an issue with manila 2d or is the customizer not working properly?
*Attempting to hard reset device right now...*
Updated Screenshot
Heres a picture of my problem
I have encountered the same problem before. Make sure that you have the most current version of M2DC (easily done using AppToDate). This solved my clock problem. Another problem is witht he two page weather... The layout gets jacked up if you change themes, requiring either editing of the xml or hard resetting to correct the problem. In either event, editing the xml was the choice I went with.
I had the same problem last week after using one of the manila customiser..
in the end had to do hard reset.
maybe I should have reinstall Manila?
but I can't see Manila when I tried to remove programs.
updating the version of M2DC helped my problem as well. I did not reinstall M2D to a different version, just a hard reset, and it was fixed.
Same Issue
It's kind of redundant when you have to hard reset to fix something so simple. It's like the M2D customizer does this on purpose. I have this awsome clock that I found as a cab file that replaced the origional clock in Manilla 2D. I have the mose update Manilla 2d customizer per this thread
http://forum.xda-developers.com/showthread.php?t=427392
and the latest version of Manila 2D from this thread
http://forum.xda-developers.com/showthread.php?t=425851.
Heres how it goes.... I can hard reset my device, and install the manila cab. I can then install the Manilla 2D customizer and loadthe theme that I made.. I will then install the cab file for the Clock that I like. It works great... As soon as I change to another theme, It goes all hay wire. I dont that much care for the analog clock and wish there was a way to disable it completely.
I guess it's the small thing that drive me crazy
I got the same problem in my Jade.
Without solution yet?
blackaos said:
I got the same problem in my Jade.
Without solution yet?
Click to expand...
Click to collapse
You need to change the registry settings back to the theme file settings after you disable the analog clock.
http://forum.xda-developers.com/showpost.php?p=3044940&postcount=1098
I dont think its due to m2dc, i have been flashing alot of ROMs and have found the newer builds seem to be the problem, not sure why? You can untick the analog and copy over the theme .xml with total commander and soft-reset but then you still have the alarm etc, you can edit out the unwanted in the .xml and there is a thread about this.
M2DC clock messed up
Folks,
same problem for me and Ihave found a workaround:
even with manilla 2d cooked in I install the following cab after having
installed m2dc and a corr. theme:
SJ 2DManila 1_00_18203328_00.cab
The installation will be unsuccesful but anyway, after a softreset the clock
is displayed in correct manner. Hope that helps.
Happened to me the other day, I figured I just did something wrong. I did a hard reset and changed to a different theme, and didn't have that problem, weird. Curious what would cause this.
According to M2DC's site, this problem was resolved and was a known issue. As of the Jan 30 release it was resolved according to the developer. Are you SURE you have the newest version ?
Its Right Here....Check against your Version
Hope this helps
ALSO,
What I did was backup the OEM Manilla theme using M2DC with the older version so I was able to restore it later....worked well as I was experimenting skins No need to hard reset
This registry setting did the trick for me:
http://forum.xda-developers.com/showthread.php?t=599887
Hey mens!!
I think that my problem is general:
I use s2u2, without HTCphoneskin. Well, how do you know, we lost the icons for Bluetooth, Headset and Handsfree.
I solved the problem for the BT with the cab Bluetooth Icon Notifier (nice colors icons, blue and red), but I don´t found for to can see anothers ones on the taskbar..
Somebody know any cabs for to do it???
Thanks in advance, best regards
Somebody with any solution??? Please, I am crazy with this issue...
I tried softkey manager[freeware] but it does not work on 6.5 though it does on 6.1. Anyone out there knows how to change the softkey?
I would like to change the left softkey from [PHONE] to [LOCK]. I know at the start honeycomb menu, there is an icon to lock my phone but i would like to have an icon at the touchflo 3d. Anybody knows how?
Thanks in advance.
Hi - in Advancaed Configuration 3.3 there is an option to assign different values to the soft keys. Also, Max TF3D theme maker has same. I have WM6.5 and both these work fine.
Peace
AaronJoYee said:
I tried softkey manager[freeware] but it does not work on 6.5 though it does on 6.1. Anyone out there knows how to change the softkey?
I would like to change the left softkey from [PHONE] to [LOCK]. I know at the start honeycomb menu, there is an icon to lock my phone but i would like to have an icon at the touchflo 3d. Anybody knows how?
Thanks in advance.
Click to expand...
Click to collapse
Softkey manager works fine for WM6.5 and Manilla 2.1 Its manila 2.5 that it doesn't work for.
Anyone got a solution for changing the softkey on manila 2.5?