SMS Notification periodic - Touch Diamond, MDA Compact IV General

Hello,
Before my Diamond I had a Motorola v3 Razr. The Razr did give a sms notification every minute or so. When I received a sms, it gives notifications until i read the SMS. The Diamond only flashes the led light. Is it possible to let the Diamond vibrate every 3 minutes or so when there is an unread SMS?
Thnx in advance

Anybody an idear?

settings/personal/sound and notifications/sound (events and notifications on)
settings/personal/sound and notifications/notifications (go look for mms/sms, check "play sound", check "display message on screen", check "vibrate" or choose any combination).
now say thank you and go ...RTFM! (Read The F... Manual) before you post.
i also recommend a search on the forum. don't be lazy...

KukurikU said:
settings/personal/sound and notifications/sound (events and notifications on)
settings/personal/sound and notifications/notifications (go look for mms/sms, check "play sound", check "display message on screen", check "vibrate" or choose any combination).
now say thank you and go ...RTFM! (Read The F... Manual) before you post.
i also recommend a search on the forum. don't be lazy...
Click to expand...
Click to collapse
A bit rude and not even an answer for his question......
He is looking for REPEATED notifications......something SPBPhoneSuite can do for example. There may be other programs out there for the same purpose, don´t know of any freeware, though....

michi123 said:
A bit rude and not even an answer for his question......
He is looking for REPEATED notifications......something SPBPhoneSuite can do for example. There may be other programs out there for the same purpose, don´t know of any freeware, though....
Click to expand...
Click to collapse
1. sorry you think so. don't get it ...what's rude? my 2 last recommendations?
2. the notification stays on the screen until you dismiss it, so why repeat? as a matter of fact i am not so sure it is not repeating...
i do know for sure that reminders do repeat so i can guess that all notifications are repeating.

i think he is looking for repeated sound notifications.

I'm very sorry when i offended some of you with my question, but the last post sums it all up. I'm looking for a repeating sound/vibration notification. I will try SPBPhoneSuite, but i'm not font on installing an whole " heavy" program for such small things. So when there is an alternative...please let me know

http://forum.xda-developers.com/member.php?u=368137Kukuriku - arrogance and rudeness are sometimes difficult to distinguish, but both are bad.

I did a freeware solution - DmsisAlert
Hi, i did a simple application that works on Windows Mobile 5 or superior (.Net CF 3.5 is a requirement).
To download go to DmsisAlert page and click on DmsisAlert link, unzip, tranfer the .cab file and install. If you like (or not), i will appreciate some feedback (you can do that on download page).
With Diamond is a good idea not to use the minimize functionality because after that there is no way to get interface back (allthough it still running on the background). I will work on a solution for that (i'm busy enjoying my new phone ).
hope that can help, helps me a lot
Dan

Hi dmoreira,
I like your thoughts about the program. I tryed it, but it gave an error. Nullexeception or something...

Dmsis Alert - SMS Notification periodic
Rik_X said:
Hi dmoreira,
I like your thoughts about the program. I tryed it, but it gave an error. Nullexeception or something...
Click to expand...
Click to collapse
Thanks for trying... the program requirements are: Windows Mobile 5 or superior and .Net CF 3.5. I tested on WM5 and WM6.1 (Kaiser and Diamond) and run ok for me. Maybe you device are missing some requirement?!
Dan

Rik_X said:
I'm very sorry when i offended some of you with my question, but the last post sums it all up. I'm looking for a repeating sound/vibration notification. I will try SPBPhoneSuite, but i'm not font on installing an whole " heavy" program for such small things. So when there is an alternative...please let me know
Click to expand...
Click to collapse
Dude, try Best Reminder:
http://best-reminder.en.softonic.com/pocketpc
It ain't freeware, but its light and does the job perfectly every time.
I did use SPB phonesuite before, and I found it heavy with other features I don't need. Also, the damn thing didn't work at times!

try this http://forum.xda-developers.com/showthread.php?t=405071&highlight=sms+reminder+vibrate
and free, always check the 'Development and Hacking' forum

@dmoreira: What requirement can that be? I have an stock diamond, with latest romupdate en .Net CF 3.5?
@MasK: That's i very nice program. I tested it, and it does the job except for the vibrating!
@badaas: That's another very nice program. I also tested this one and it works perfect. Except that it turns on the screen with every reminder... And you have to reboot the device to configurate it again...

Rik_X said:
@dmoreira: What requirement can that be? I have an stock diamond, with latest romupdate en .Net CF 3.5?
Click to expand...
Click to collapse
Sorry, a made some fix in some peace of code that depending of device could rise exception and i think the problem was solved.
I'm attaching the application here to let things easier.
Dan

Rik_X said:
@MasK: That's i very nice program. I tested it, and it does the job except for the vibrating!
Click to expand...
Click to collapse
Yea.. I know.. but it's ok for me. If yr phone is in silent mode, it vibrates instead.

dmoreira said:
Sorry, a made some fix in some peace of code that depending of device could rise exception and i think the problem was solved.
Dan
Click to expand...
Click to collapse
Ok it works just fine! Very nice program! But if i can say 3 things about it:
- The minimize function still doesn't work to well
- You cannot delete the program via the "delete programs" way
- I really like the phone to not only notify me via sound, but also via vibration? Is this possible?
thnx!

Rik_X said:
Ok it works just fine! Very nice program! But if i can say 3 things about it:
- The minimize function still doesn't work to well
- You cannot delete the program via the "delete programs" way
- I really like the phone to not only notify me via sound, but also via vibration? Is this possible?
thnx!
Click to expand...
Click to collapse
before anything thanks for trying my work... about your comments:
"- The minimize function still doesn't work to well" : You're correct, but in others devices without TouchFlo3D the minimize works a lot better. With TouchFlo3D this feature practically doen'st work (i believe that's the same for other applications that have a minimize function that puts an Icon in the Today Screen).
"- You cannot delete the program via the "delete programs" way": A fix for that will be available very soon
"- I really like the phone to not only notify me via sound, but also via vibration? Is this possible?": It's possible but i dont like the result of doing this with the easiest way, so this feature will be available not so soon (but i will adivise here when so).
I will make some changes and post here a new version with some improvements.
Thanks again for trying.

dmoreira said:
"- The minimize function still doesn't work to well" : You're correct, but in others devices without TouchFlo3D the minimize works a lot better. With TouchFlo3D this feature practically doen'st work (i believe that's the same for other applications that have a minimize function that puts an Icon in the Today Screen).
"- You cannot delete the program via the "delete programs" way": A fix for that will be available very soon
"- I really like the phone to not only notify me via sound, but also via vibration? Is this possible?": It's possible but i dont like the result of doing this with the easiest way, so this feature will be available not so soon (but i will adivise here when so).
Click to expand...
Click to collapse
I like testing this program, because it meets almost my exact criteria for such a program! Nice work!
- That minimize function is a pity, but understandable with the TF3D thing!
- Ok if you can fix that 'delete programs' issue, that would be very nice. I don't have a clue how i can properly delete it now!
- I will wait on a fix for the vibrating! That would be very nice!
Keep up the good work!
Thnx!

Dmsis Alert uninstall issue resolved
Rik_X said:
I like testing this program, because it meets almost my exact criteria for such a program! Nice work!
- That minimize function is a pity, but understandable with the TF3D thing!
- Ok if you can fix that 'delete programs' issue, that would be very nice. I don't have a clue how i can properly delete it now!
- I will wait on a fix for the vibrating! That would be very nice!
Keep up the good work!
Thnx!
Click to expand...
Click to collapse
Hi Rik_X, after a lot of work (i posted the issue in different forums, but got no answer) trying finding a correct solution to uninstall and i ended downloading SkTools (i downloaded from here http://www.clickapps.com/download.htm?pvid=1324) and use a feature called Installed Programs and then Dmsis Alert was listed and i was able to uninstall it!! After that i install the version attached here and then the Dmsis Alert will appear again in the Windows Mobile Remove Program list. Sorry about the troubles that error could cause you.
Anyway i'm posting the last version the doesn't have this uninstall issue. I'm also working on the vibrate feature (still looking a direct interop way to do that).

Related

PointUI to replace Today Screen

When using PointUI, the app minimized and you are returned to the Today screen when hitting the End Button/Red Button. Is there anyway to disable this from happening? Meaning, is there a way to never be able to go back to the Today screen? Unless of course you go to "Close Home".
Thanks in advance.
grandpareza said:
When using PointUI, the app minimized and you are returned to the Today screen when hitting the End Button/Red Button. Is there anyway to disable this from happening? Meaning, is there a way to never be able to go back to the Today screen? Unless of course you go to "Close Home".
Thanks in advance.
Click to expand...
Click to collapse
I myself have been trying to find a way to completely replace the Today screen with PointUI, but without any success. So I ended up throwing together this little piece of software.
It is called GetPointUI and is basically a Today plugin, which acts similar to the SPBWatcher plugin. If PointUI is not running, it will start it, and if PointUI is running, it will activate it as soon as the Today screen becomes visible. To deactivate GetPointUI, simply uncheck the plugin in the Today settings.
Now, mind you, I have only tested this application on my XV6800 (and it is working perfectly) with PointUI installed in the default location. I do not have S2U and/or any other launchers/Today replacements installed, so GetPointUI might interact with those in an undesired way. If you should have PointUI installed in a non-default location, GetPointUI SHOULD be able to detect that and find the correct path, but this has not been tested. The same goes for new versions of PointUI that might be released in the future. GetPointUI SHOULD always bring up the latest version, but again, that is pure theory. I am curious myself...
Installation: Just install the attached CAB and soft-reset your device.
NOTE: I will NOT be responsible for any damage on your device or any data loss you may incur. You are using this software at your OWN risk.
Unfortunately, that CAB file you posted won't install. No error, just "Unsuccessful"
here this may have fixed it
Perfect. Thanks guys. Since the time of posting (January), pointui has created a feature where you can choose to replace the Task Bar/Start Bar with the pointui task bar. Touching this "pointui task bar" takes you back to the home screen and at another location on the bar it gives you the "Running Applications"
Thanks again guys. Much appreciated.
kidnamedAlbert said:
here this may have fixed it
Click to expand...
Click to collapse
Thanks kidnamedAlbert. I should have noticed that.
mimpoca said:
Thanks kidnamedAlbert. I should have noticed that.
Click to expand...
Click to collapse
yeah no problem
Still not working for me. Any suggestions?
getpointui not tinstalling
Yeah i get it to ask where to install, i choose device and then it gives me an installation unsuccessful message. I am using an xv6800 on verizon with wm6.1
hello,
i tried this .cab on PPC 2000SE - it installs - but nothing happens
- no new plugin
- going to today (and stay there) is still possible.
is there a way to make this work on 2003SE ?
thank you!
GetPointUI not installing...
chrisaba1 said:
Yeah i get it to ask where to install, i choose device and then it gives me an installation unsuccessful message. I am using an xv6800 on verizon with wm6.1
Click to expand...
Click to collapse
I have an HTC S640 with Windows Mobile 6, I get the same error...will not install. Without this app, PointUI although very slick, without it beeing able to work like this its just eye candy....
If anyone has this working, please POST!!!!!
i know this is off the topic, but does anyone know if POINTUI is still in production for a new release?
it is true there are bugs in pointui, but free is free.. for the most part, POINTUI is a excellent all in one interface, simple, basic and fast...
tvos

A few questions about my new Wing

Hi everyone... I am trying to find out a few things about my new phone. I am brand new to Windows Mobile, coming from a blackberry, and have done much searching on here, but haven't found exactly what I'm looking for.
I have found tons of posts on how to disable threaded texts. Not sure why anyone would want to do this, (I'm still used to my blackberry, and I love the threaded texts)... so I am wondering how I get that, because mine must be already disabled. Mine only shows the messages that were sent to me. I did get a program from a guy I work with called Xtreme text, which is ok, but kind of slow.
Also, I would like to know if I can disable or at least change the sound that my phone makes when I send a sms. I went into sounds and turned off notifications, and that turned it off, but it also turned off the sound for when I receive a text.
I saw that there are different operating systems I guess they are, and some of them maybe would give me the things I'm looking for, but a lot of them say that the transcriber has been disabled, and that is the whole reason I had to lose the Blackberry, because we are using a new program at work and I need to be able to have my phone signed with the stylus.
I would appreciate any help I can get. Thanks!
Welcome to xda-devs! consider this your "get questions anwered without just being to sold to search" pass.
Threaded texts are not natively supported in WM6. You must flash a WM6.1 rom for natively supported threaded texts. Flashing roms is really fun and kind of addicting (at least imho). There are currently 2 methods for flashing roms- USPL and Hard-SPL. Your phone is protected from rom changing with a "CID-Lock" that is built into the SPL of your phone. The USPL uses a temporary SPL to disable the lock where as Hard-SPL flashes a totally new SPL that has no CID-lock.
Romwise, we do not yet have an abundance of cooks. We have two main cooks, itje and ttran. They make the "Touch-it" and "Open Touch" roms, respectively.
Now about the transcriber. The transcriber takes the text that you write and translates it into text. I am not sure what program you could use to actually sign documents.
Welcome to xda-devs!
Thanks fzzy! Ok, so in your opinion, what would be the easier way for a newb to do this, and what would be the flash that I wanted to use? I am totally new to all of this and will need step by step instructions on how to do all of it without turning my phone into a paperweight.
Any suggestions and help will be awesome! The main things I want are the threaded texting, and to be able to scroll through my contacts with my finger like the iphone I guess. Also, I would really like for the phone not to make that bell noise when I send an sms. The thing with the transcriber i believe is built into the program that we will be using, but the ability for the phone to accept the movement of the stylus needs to be active still.
Thank You!
read this!
http://forum.xda-developers.com/showthread.php?t=369397
How2flash!!!
Very important.....
And if you hard-spl... you can test any rom you want....
Yeppers. As fzzyrn said, you don't need the transcriber since all that does is translate what you write into words. If you do want it, though, you can built a ROM using my kitchen that includes it.
Romwise, we do not yet have an abundance of cooks. We have two main cooks, itje and ttran. They make the "Touch-it" and "Open Touch" roms, respectively.
Click to expand...
Click to collapse
Boo hoo, no body loves me. I'm gonna built one ROM with every configuration possible with my kitchen and release it so that people will start talking about my Clean series ROMs. hehehe
Hmm I still don't really understand what any of that means. Maybe I will just have to learn to like this phone the way it is.
It does say though, under "programs you need" that you need active sync if you have XP. What if you are using Vista?
I am going to keep reading posts to find out as much as I can, but this is all pretty confusing to me so far...
Landocommando12 said:
Hmm I still don't really understand what any of that means. Maybe I will just have to learn to like this phone the way it is.
It does say though, under "programs you need" that you need active sync if you have XP. What if you are using Vista?
I am going to keep reading posts to find out as much as I can, but this is all pretty confusing to me so far...
Click to expand...
Click to collapse
My suggestion:
1. USE your device about a few weeks. You never tune a car before you tested it.
2. Meanwhile READ, READ, READ and you will understand WinMobile etc.... and Activesync and WMDC on Vista
3. NOW start searching apps you want to try....
4. And now think about falshing a tuned up Operating system....
But please take time for 1-3!!!!!!!
@ ivan: WE love you!!
But the great super working Moderator was also missed.
hahahahahahahaha
papamopps said:
@ ivan: WE love you!!
But the great super working Moderator was also missed.
hahahahahahahaha
Click to expand...
Click to collapse
lol. It's ok, I love the moderator's work, too!
Together, we can be "The Forgotten."
Would it maybe be easier for me to just try the palm threaded sms program, since that's really the biggest thing I want? Also, does anyone know how to turn off that stupid annoying sound that comes up and says message sent? That thing is really annoying me!
Thanks!
Landocommando12 said:
Would it maybe be easier for me to just try the palm threaded sms program, since that's really the biggest thing I want? Also, does anyone know how to turn off that stupid annoying sound that comes up and says message sent? That thing is really annoying me!
Thanks!
Click to expand...
Click to collapse
you got to reg edit it(use a reg editor like PHM Reg edit0
then go to HKLM(hey_local_machine)\software\microsoft\inbox\settings
SMSNoSentMsg = 1
you might have to create the value...
kidnamedAlbert said:
you got to reg edit it(use a reg editor like PHM Reg edit0
then go to HKLM(hey_local_machine)\software\microsoft\inbox\settings
SMSNoSentMsg = 1
you might have to create the value...
Click to expand...
Click to collapse
Ok, sorry but I'm really new to this... is this reg editor something I run on the phone, or on the computer while the phone is connected to it?
Thanks
youhave to install PHM reg edit to your phone or use this on your desktop computer(attached):
ok, so I started the regeditor and connected my phone, and went into HKLM/Software/Microsoft/Inbox but then there is no settings folder, only "Ldapinfo", "sendDriver", and "Svc". Any suggestions on where to go from there?
Thank you!
here i created a cab file for you.
just copy it to your wing then click it and it will fix this sent message thing
hmm I copied it and clicked it, and it opened a bunch of text in IE, but it didn't stop the message sent notification. Not sure if I did something wrong or what...
lordy lordy. how'd i forget ivan? haha.
we should also add albert now what with his carbon rom, eh?
oh by the way, you need to click it from your device, not form your computer. trix is for kids (get it?). oh and you should get some "cab via activesync" software so you don't hafe to repeatedly copy and open.
so it didnt install at all?
i tried it on my wing and showed this:
kidnamedAlbert said:
so it didnt install at all?
i tried it on my wing and showed this:
Click to expand...
Click to collapse
Click install
haha yeah i know its just i made that cab for him nd it "didnt work" but i think Fzzyrn helped him

Dismiss Alarm Box Unchecks itself

every 2 or 3 days when my alarm sounds i get no onscreen noticfication to dismiss the alarm, only the symbol in the status bar.
When i look into sounds notification/reminders i see the "display message on screen" box is unchecked again so i recheck it.
What causes this to uncheck itself?
are you experiancing this behaviour or have any insight into the cause?
thanks
I have the exact same prob. It started when I used Diamond TF3D Config prog to change the diamond theme.
Dont know why it happens bro.
Anyone knows how to disable Missed Alarm Alert (symbol on the status bar) so I don't need to go to status bar console and remove it every morning ?
drdoc said:
I have the exact same prob. It started when I used Diamond TF3D Config prog to change the diamond theme.
Dont know why it happens bro.
Click to expand...
Click to collapse
I believe i was having this problem before i had installed Diamond TF3D.
The search continues.
Im having the problem on TLR3 ROM and i know people who are also haveing this trouble on 1.37 original ROM and the 1.93 Original.
I'm using TF3D Config and also 1.93 ROM but I don't seem to have this issue?
Although I have never used it to apply a 'theme' only, to change date/time format and apply one of the performance tweaks.
Have you guys updated your TF3D config via apptodate and also tried restoring defaults (within TF3D config) and then tried applying your settings again?
i too only use TF3D config to format the date, i have updated it using apptodate.
I may uninstall it and see what effect that has, im not really sure that TF3D is the cause of the problem.
rumpleforeskin said:
i know people who are also haveing this trouble on 1.37 original ROM and the 1.93 Original.
Click to expand...
Click to collapse
Yes, I'm on the original 1.37 ROM and am seeing this - bl00dy annoying too as it seems such an odd 'bug'....
Mathew
Had this happen again today, really annoys the wife as i spend time trying get the phone to shut up.
I have made no progress determining the cause, but it does only seem to uncheck the box after a soft reset, but strangley not after every soft reset..... the plot thickens
This problem only happens after i reset the device, but not every time.
As i cant find the cause i was thinking of a way to fix the problem.
i found the reg entry for the reminders show "on screen"
\HKEY_CURRENT_USER\ControlPanel\Notifications\{15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD}
and i have the values for the box checked and unckecked.
I have been googleing for the past hour but having no luck with what i want to achieve.
I would like to write a batch file to open a reg file that will change the dismiss box registry entry to the checked value, but it seems batch files cannot be run from the windows start up folder.
Im not very technically skilled with programming so could someone more knolegable point me towards the correct way of doing what i desired, which is change a rehgistry value at start up.
rumpleforeskin said:
i found the reg entry for the reminders show "on screen"
\HKEY_CURRENT_USER\ControlPanel\Notifications\{15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD}
Click to expand...
Click to collapse
I could write an executable that will restore the registry entires on start-up but I can't find the registry value that controls it.
Which value are you editing?
Start / Settings / Sounds and Notifications
Page Notifications
Event - choose Reminders
Check on Display Message.
CHEERS
pegaz said:
Start / Settings / Sounds and Notifications
Page Notifications
Event - choose Reminders
Check on Display Message.
CHEERS
Click to expand...
Click to collapse
If that was in reply to me, I'm looking for registry entry!
This thread seems closest to the problem I have.
For me it is always that on alarm there is no popup where I can dismiss the or snooze the alarm
I always have to unlock the phone (by entering password), tap the status bar, then choose the alarm button and then the pop up appears as it should have done by itself.
This is always, no matter if I reset or not. And, I have checked on "display message" when I look into the settings.
This is freaking weird and annoying.
I've noticed the box unchecks after the sync process via Activesync.
I'm pretty sure it's caused by particular side software we have installed on our Diamons. I propose to post the side software list we have and then point out the pattern.
My list:
MS Voice Command
Finix Battery Icon
Splash ID
Sprite Backup
Diamond Tweak
Resco Explorer
Yandex Maps
Skype
CorePlayer
G-Alarm
Manila Calculator Skin
Yota TV
Nice idea but already flawed given you've not published an exhaustive list. A case in point being Activesync - that's a resident piece of software and furthermore one which you suspect as possibly being responsible!
Or are you certain it is a non-Windows issue? That's quite a leap of faith given we've all previously been scratching our heads...
I don't mean to come across negative, but I also don't want to see a futile attempt at finding a solution!
Mathew
No I am not pretty sure it's not Windows issue. However, if it is, why there are so few of us suffering?
I suspect G-Alarm, got to try to play around with it being uninstalled.
I'm having the same annoying problem since running the 2.03 official ROM. On the 1.93 I never had this problem. I didn't install G-alarm or TF3DConfig.
Moonsower said:
No I am not pretty sure it's not Windows issue. However, if it is, why there are so few of us suffering?
Click to expand...
Click to collapse
That's a very good point, although it could quite simply be down to a combination of i) a limited number of people using the alarm, ii) affected users not being bothered by the issue, and/or iii) affected people not realising they are being affected!
I suspect G-Alarm, got to try to play around with it being uninstalled.
Click to expand...
Click to collapse
For what it's worth I've never used G-Alarm...
Mathew
Polluxus said:
I'm having the same annoying problem since running the 2.03 official ROM. On the 1.93 I never had this problem. I didn't install G-alarm or TF3DConfig.
Click to expand...
Click to collapse
I had it on 1.93 and still on 2.03

Thirteen "not obvious" questions about using X1i

Good afternoon!
I've tried to ask these question on other forums, but almost nobody gave me an answer. There were some about different software to use, but it didn't really help. So I would be very pleased if you, dear X1 gurus, answer these question. Please, if you know the answer - write it here for me and other people. Thank you very much in advance!
The priority is: I. How to solve the problem using native software or registry? II. If and only if the first is not possible, how to solve it using different software?
1. Where in file system the vocabulary of words which were inputted before is situated? It's a vocabulary with these tooltips-words while typing. Can I get it somewhere form my phone and backup or even edit?
2. How can I check my X1 uptime?
A: As yet I know only one way: use AEButton Plus. You can correct or supplement this opinion(and please do it) if you know more on that.
3. Someone called me from number +ХХХ, I want to call him back, BUT to add a zero between + and the first digit(+0XXX). How can I do it? I can't copy this number and there is no options like "change then dial". The one and only solution for it - is to choose "send SMS" and copy the number from the "From" field! But is it useful and normal for a device which costs about 500 euro?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
4. Imagine: you have a contact Ivan in your contacts, which has 2 phone numbers: mobile and work. Two sms arrive to your phone: one is from his home number, another is from work. Sms inbox displays both of it as "Ivan". How do I know which sms is sent from what number?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
5. How can I copy a number which was dialed earlier or number from contacts? I see only one way(but it's weird): chose "edit contact" and copy from the field. Is there another way?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
6. While a phone conversation how can I easily save a number which my friend is saying to me? I tried to dial it while a call is active, it's ok, but once the call is dropped, my number disappears! Yes, I can create a note using a special touch-key, but it's not useful, because I should use my keypad and then should copy that number, but I need to dial it! How can it be solved?
7. Have anybody experienced a problem while taking a photo of many different objects? I had. It happened when I took a photo of a forest - there were a lot of trees alongside each other and after pressing shot button, "Saving..." was displayed on my screen for about 15 minutes! After it said that it failed to take a photo. What it can be?
8. Where can I find all my earlier connected WiFi points and passwords? I want to save it before upgrading my firmware. Can I backup it?
9. Can I turn of a feature of turning my screen light on when I plugging my X1 to PC? I don't want this light to be turning on when I do it! Is it possible?
10. While surfing internet via GPRS/EDGE or getting my email from server, my GSM part of device seems to be "unconsciousness": when somebody calls me, I'm "out of zone". How can I fix it? I want my GSM part to be number 1 by priority!
11. I can see anything when the sun is shining. I know everybody with X1 can't. But can I "ask" my backlight to help me? For example, set it to turn maximum power when on the light, or something? I'm asking because, as I've understood, my auto-backlight works vice versa: when it's bright - it turns off, when it's dark - it turns its max power. I want max power when it's very bright too!
A: People say that screen protector with anti-glare really helps.
12. When an SMS is coming, I get a popup notification at the bottom of the screen. I can either press "Reply" or "Options". If I press reply, the chat mode opens and I can reply, seeing all our conversation. BUT if I go to my address book and choose "New SMS" on a contact, different form will be opened, just like for e-mail composing. And here is a question: how can I make this "e-mail composing" style sms appearing after I press "Reply" when new sms arrived? I know how to turn the chat mode off, but I don't need it to be turned off completely, because it's useful while reading sms from one person. I just want reply to a person using simple form. Is it possible somehow? I think that if it's can be made by hands(New sms from contacts), then it could be implemented programmatically... maybe some values in registry?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
13. At the screens you can see screenshots from my X1 with R2A0010 and 1.14 radio: 1 hour after powering on and 2 days after powering on. Why there is such a difference in memory consumption in some system processes? Is it an ordinary thing?
A: People say that it's normal. You can correct or supplement this opinion(and please do it) if you know more on that.
Thank you very much in advance again!
Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
#5, go to call log in the phone dialer and there is a menu option to save to contacts. If you want to save it to a pre-existing contact....you will have to add a question #14 to your list
PhoneX can do these two.
WhyBe said:
Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
Click to expand...
Click to collapse
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
WhyBe said:
#5, go to call log in the phone dialer and there is a menu option to save to contacts.
Click to expand...
Click to collapse
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
WhyBe said:
If you want to save it to a pre-existing contact....you will have to add a question #14 to your list
Click to expand...
Click to collapse
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
VNMenIeu said:
PhoneX can do these two.
Click to expand...
Click to collapse
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)
BRING ON THE QUESTIONS!!!!!!!!!
1 - I don't know.
2 - AEB Button Plus has such a feature.
3, 4, 5, 6, 12 - I use PhoneEx sorry.
7 - Never heard of it. Upgrade your device to R3A and try again.
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
10 - Never had that problem. Are you using a custom ROM?
11 - I can see the screen very good in the sun, because I use a screen protector with anti-glare. Buy one and be amazed.
13 - It is normal.
J-Pro said:
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)
Click to expand...
Click to collapse
PhoneEX is way more useful than org. dialer
orelsi said:
BRING ON THE QUESTIONS!!!!!!!!!
...
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
I've been using the PhoneEx trial for a few days and it doesn't do #5 and #6. If any workaround involves tons of keypresses and program changing (during the call) to accomplish, then it fails. I think the OP is looking for a quick way of accomplishing these things during a call. Going to the notes application during a call only partly works. In order to actually use that number you may have jotted down in notes, you have to find the file and call the number from the notes file...not very elegant. There should be a means of jotting down numbers while in the dialer (without sending out tones causing your voicemail to go crazy) so that you may call or save them during or afterwards.
Also, I may be wrong but, how do you add additional numbers to a contact without copying and then going into edit contact then pasting? For example, how do you add a home number to a contact that already has a work number without manually going into edit contact and adding it. There should be a "merge with existing contact" feature within the dialer menus.
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
WhyBe said:
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
Click to expand...
Click to collapse
That is your right, but not my problem.
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe
spikegotti said:
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe
Click to expand...
Click to collapse
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.
orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
same...i think it's the most useful app in my fone.
WhyBe said:
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.
Click to expand...
Click to collapse
Sorry, I can't understand what you want .
J-Pro or others,
what is the task manager in screenshots in first post?
It's not a biult-in one??
orelsi said:
1 - I don't know.
Click to expand...
Click to collapse
Thank you, it really helped me!
orelsi said:
2 - AEB Button Plus has such a feature.
Click to expand...
Click to collapse
Didn't know, thank you.
orelsi said:
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
orelsi said:
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
Click to expand...
Click to collapse
If somebody has it, please, post it here...
orelsi said:
10 - Never had that problem. Are you using a custom ROM?
Click to expand...
Click to collapse
No, my rom is R2A0010 UK WWE.
doministry said:
what is the task manager in screenshots in first post? It's not a biult-in one??
Click to expand...
Click to collapse
It's FdcSoft Task Manager
J-Pro said:
Thank you, it really helped me!
Didn't know, thank you.
Click to expand...
Click to collapse
You are welcome!
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
Click to expand...
Click to collapse
Sorry as in "I use superior product ftw" .
Unfortunatelly the nature of WinMo is that you need to add third party soft most of the time. That's the way it works.
orelsi said:
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
Click to expand...
Click to collapse
Checked all txt(and other) files in windows folder. There are nothing about wifi settings...
J-Pro said:
It's FdcSoft Task Manager
Click to expand...
Click to collapse
Thank you for help!
If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?
VNMenIeu said:
If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?
Click to expand...
Click to collapse
Just for fun My work computer can be running for month or so... Sometimes it's interesting for how much your X1 is powered on. For example, if I see any bugs on it, I question myself: "How long does this thing work? Maybe it's time for an SR?". If I found that it's only a day - I would be very curious. And if it's already a week - I do an SR without any additional thoughts That's my answer

@chefs: reward offer for "task-snoozing"

Dear Chefs,
thank you for all great work you have done so far!
I use the Energy ROM for about two months and I'm stunned about all the great features he provide.
However, there is one thing I can't stand: The lack of appointment- and task snoozing other then 5 minutes. This makes the remind function almost useless.
My German t-mobile branded TP2 (called: MDA Vario V) came with the option to snooze appointments and tasks by a selectable time. So I could choose remind me in one or half Hour for example or one day and many other options, rather than dismiss it over and over again every 5 minutes. This is really bugging me.
I found a fix from crackwhore but it seems to be not compatible with the current windows mobile 6.5 ROMs.
Because it is so important to me and, as I noticed, to many, many others I want to post a reward and invite everybody who want this feature to join me by posting how much you are willing to donate to the person who find a solution and share it with the community
A proper solution would be a fix that works for the latest generation of WM6.5 ROMs and it would be great to have it already cooked into the popular ROMs, including Energy ROM.
So if somebody finds a solution, everybody who joined me is asked to donate the promised amount to the person who provided the solution.
I start off with a offer of 10$
Feel free to join me and make suggestion.
And please be true to your word: Don't offer something you are not willing to donate.
Current Offers (25.10.2009 01:25 UTC):
10 US-$
and
0 €​
Why dont you ditch MS with another commercial application in the market? Couldn't you able to find one? I dont remember it but there was a program like this. Google it I suggest.
You can set the "reminder" time as any minutes/hours/days when you add an appointment. Am I missing something here?
NVM, I solved it! I was able to replace the new Notification.dll that handles the notification bubbles with an old, stock one. See the next post for the solution I made!
Question
Did your stock German ROM have the notification manager, where you'd click the taskbar, and it brings up that full screen? And also, did it have the skinned notifications, like the EnergyROM does? Please just describe exactly how the stock ROM handled the notifications, describe it visually.
Information
I researched this for 5 hours, and I was trying to do this: I wanted to make the Notification Panel remain (Full screen when you click on Taskbar), BUT, I wanted to use the standard Windows Mobile notification popups, because those allow you to snooze better. Well, that's not possible, from what I could tell. It's either all or nothing, you can't mix Microsoft's and HTC's notification system.
Solution
So, you have to disable the entire thing, which means you won't have the finger friendly notification system when tapping on the top taskbar. You can find the registry to disable Notification Manager here: http://forum.xda-developers.com/showpost.php?p=4125405&postcount=3
Advanced Notifications Power Snooze Appointments!
I solved it!! It's CABbed up, and available on my website, Wingster.
Get your solution here: http://thewingster.com/advancednotifications.aspx
And if you want to donate, then follow the link on the bottom of my Wingster website, or use this link: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=5401195
Maybe I should have waited longer, for the bounty to increase! Nah, I did this mostly for myself, but it did end up taking 5 hours! I hate registries!
How I Created It
I found the old NotificationLayout.dll, and used that one for handling the notification bubbles! This brings back the old WinMo notification style popups, but it also keeps the finger friendly notification panel! Win-win!​
Imagine how fast the world is, I wish you could solve my break off with GF such a fast.
Have Fun, Cheers
Sunny
the solution that brings the old popups up, has been around since my touch x 6.0 and that is since december last year...
well well well......
Awesome. I had used the crackwhore one and it worked but this is better
ace10134 said:
Advanced Notifications Power Snooze Appointments!
I solved it!! It's CABbed up, and available on my website, Wingster.
Get your solution here: http://thewingster.com/advancednotifications.aspx
And if you want to donate, then follow the link on the bottom of my Wingster website, or use this link: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=5401195
Maybe I should have waited longer, for the bounty to increase! Nah, I did this mostly for myself, but it did end up taking 5 hours! I hate registries!
How I Created It
I found the old NotificationLayout.dll, and used that one for handling the notification bubbles! This brings back the old WinMo notification style popups, but it also keeps the finger friendly notification panel! Win-win!​
Click to expand...
Click to collapse
Curious before I use this, how is it different than crackwhore's fix?
jank0023 said:
Curious before I use this, how is it different than crackwhore's fix?
Click to expand...
Click to collapse
FYI, crackwhore's is a better solution it doesn't eliminate the repeat function so what happens you get the alarm one time which was just as big a concern that I've had with some of the ROMs.
jank0023 said:
FYI, crackwhore's is a better solution it doesn't eliminate the repeat function so what happens you get the alarm one time which was just as big a concern that I've had with some of the ROMs.
Click to expand...
Click to collapse
shiat..might I add, you can uninstall the cab but the dll has been overwritten so some how I gotta find the original and use crackwhore's or hard reset plus crackwhores.
smaberg said:
the solution that brings the old popups up, has been around since my touch x 6.0 and that is since december last year...
well well well......
Click to expand...
Click to collapse
Lol dam. Wasted that effort for nothin? lol. Well we can add mine to the collection of CABs that do the exact same thing as the other
Hi,
sorry for the delay, but university was keeping me extremely busy this week.
However I'm glad you found a solution. It's so unimaginably convenient to be able to snooze the alarm!
However would it be possible to add some options? There is still room on the display for one option isn't it?
Very handy would be having options like four and twelve hours (half day).
I would rather surrender 10 minutes while already having 5 and 15 minutes.
(or maybe better: surrender 15 minutes while keeping 10)
However the current stage of development is already great and of cause I will stand my word of donating 10 bucks.
I invite everybody who like this fix to also support him since he was fair enough of not "waiting" for the bounty to increase first and he's doing a great job with his website anyway.
Best Regards, Time
PS: You are talking about other - already existing - solutions? I only found crackwhores fix and didn't get it to work. Well now I have a great one-click-solution I won't surrender ... would be just interesting to know.
PPS:
Question
Did your stock German ROM have the notification manager, where you'd click the taskbar, and it brings up that full screen? And also, did it have the skinned notifications, like the EnergyROM does? Please just describe exactly how the stock ROM handled the notifications, describe it visually.
Click to expand...
Click to collapse
By next week I will flash my ROM anyway so I could flash the stock ROM in between and check if that helps. Interested?
TheTimetraveler said:
PPS:
By next week I will flash my ROM anyway so I could flash the stock ROM in between and check if that helps. Interested?
Click to expand...
Click to collapse
Yea, flash the stock German ROM, and see how that operates. It'd be very interesting if they kept the advanced snooze options while keeping the slick notification style too.
I think that editing the DLL's is impossible though, but I guess it'd be worth a try. My initial goal was to keep the skinned notifications but add the snoozing. That'd be the optimal goal, and I will try to see if that can be done!
ace10134 said:
Advanced Notifications Power Snooze Appointments!
I solved it!! It's CABbed up, and available on my website, Wingster.
Get your solution here: http://thewingster.com/advancednotifications.aspx
And if you want to donate, then follow the link on the bottom of my Wingster website, or use this link: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=5401195
Maybe I should have waited longer, for the bounty to increase! Nah, I did this mostly for myself, but it did end up taking 5 hours! I hate registries!
How I Created It
I found the old NotificationLayout.dll, and used that one for handling the notification bubbles! This brings back the old WinMo notification style popups, but it also keeps the finger friendly notification panel! Win-win!​
Click to expand...
Click to collapse
Sorry ace
it doesnt work for my TP2 with valkyrie.ftp v5.8.23534 wm6.5 15th feb (without footprint\doc)
the cab installs fine but no love when it comes to notifications
spiro said:
Sorry ace
it doesnt work for my TP2 with valkyrie.ftp v5.8.23534 wm6.5 15th feb (without footprint\doc)
the cab installs fine but no love when it comes to notifications
Click to expand...
Click to collapse
Yourestarted your phone after installing it, right? Maybe his ROM has some different notification system...I could try to look into it if you can confirm it still didn't take effect after a restart.
ace10134 said:
Yourestarted your phone after installing it, right? Maybe his ROM has some different notification system...I could try to look into it if you can confirm it still didn't take effect after a restart.
Click to expand...
Click to collapse
Yes I restarted the phone after installation but it didnt work
I would reeeeeally Appreciate it if you could look into it
You dont even need to make a .cab file, just give me some guidance on how to replace the .dll you mentioned in your post that worked
spiro said:
Yes I restarted the phone after installation but it didnt work
I would reeeeeally Appreciate it if you could look into it
You dont even need to make a .cab file, just give me some guidance on how to replace the .dll you mentioned in your post that worked
Click to expand...
Click to collapse
Well.....
First, download This File, unzip it, and place the DLL in the \Windows directory of your phone.
Now, here's where it may be different, apparently. Using a registry editor (like PHM Registry), try to find the string that is called CustomUIDLL and contains NotificationLayout.dll.
That string key should be located under HKLM/System/Shell/Notification/OEM, however since the CAB didn't work, Valkyrie must have changed the location of the registry key. See if you can find it. Once you do, change the string value to: "NotificationLayoutOld.dll"
Hopefully that'll get it working!
ace10134 said:
Well.....
First, download This File, unzip it, and place the DLL in the \Windows directory of your phone.
Now, here's where it may be different, apparently. Using a registry editor (like PHM Registry), try to find the string that is called CustomUIDLL and contains NotificationLayout.dll.
That string key should be located under HKLM/System/Shell/Notification/OEM, however since the CAB didn't work, Valkyrie must have changed the location of the registry key. See if you can find it. Once you do, change the string value to: "NotificationLayoutOld.dll"
Hopefully that'll get it working!
Click to expand...
Click to collapse
Thanks man!
Ill try it and post back
spiro said:
Thanks man!
Ill try it and post back
Click to expand...
Click to collapse
OK.
Under HKLM/System/Shell/Notification/OEM i have one folder named "reminder" and 3 other items named "default", " customUIDLL", and "userdefaultUI"
if i click on customUIDLL the string already reads "NotificationLayoutOld.dll" ( iguess from when I applied the .cab file) so there is nothing to change!
Also here is a screenshot of the contents in the HKLM/System/Shell/Notification/OEM/reminder folder that I mentioned above
should i be editing the autodismissextendedduration file?
BTW I forgot to mention that when i install the cab file instead of "snooze' at the bottom bar I get the "menu' on the right and also another symbol on the left (like a phone with an 'x' next to it" but if i click on any of them the notification goes away and does not come back
So in essence the .cab works (because it points it to something else) but the location it point to, doesnt contain the necessary file to show up when you click on the the "menu' icon or the other icon that comes up SORRY I DIDNT MENTION THAT EARLIER BUT I WASNT AWARE OF IT TILL NOW.....

Categories

Resources