dunno if this is a duplicate post, delete it if it is. i couldn't find this solution, what i did find is that if you simply go into your regedit program and go to hkey_current_user/software/htc/manilla and change the value in http.ignoreproxy from 1 to 0, and it will work. dont know if anyone has had this problem but i sure did. i'm new to this stuff anyway. xda is the ish though.
nice find.
Will give it a try as i had turn turn off the proxy in the end to get weather to work and also opera wouldnt show facebook with it on.
how to modify registry??
you have to use a regedit program, either installed on your device or your desktop. just google it. btw i used CeRegEditor installed on my desktop for this tweak.
I don't hve any key as such in the registry "http.ignoreproxy" do I hve to create it...
I, don't get it:
I successfuly changed the key from 1 to 0, then I check the registry key and it still shows 0, but when I try to update weather it displays Connection failure, then when I check the registry key it has changed backed to 1.
Any ideas anyone?
whitefalcon said:
I don't hve any key as such in the registry "http.ignoreproxy" do I hve to create it...
Click to expand...
Click to collapse
After you attempt to update weather, the key should have created automatically..
mbclk55amg01 said:
dunno if this is a duplicate post, delete it if it is. I couldn't find this solution, what i did find is that if you simply go into your regedit program and go to hkey_current_user/software/htc/manilla and change the value in http.ignoreproxy from 1 to 0, and it will work. Dont know if anyone has had this problem but i sure did. I'm new to this stuff anyway. Xda is the ish though.
Click to expand...
Click to collapse
thankyou sooo much you have solved a year long problem that i have been having with my diamond and i just found this thread i really appricate it!!!
Using the Reg editor program go to :hkey_current_user/software/htc/manilla and change the value in data.autodownload from 1 to 0
Related
Ok I have searched and not run across anything without reading every thread in here.
How do I change my default input method from keyboard to letter recognizer and MAKE it stick.
I change it i the input menu and reg edits but every time I soft reset it is back.
...we're on the same boat :?
Join the club!
I'm after the phone pad so I can still use the 8125/Wiz screen as a normal phone keypad at times and not have to whip out the stylus.
whatever you do, dont use registry wizard to set it... I white screened a week ago doing that, hard reset
hope to find a solution
Perhaps this:
HKCU\ControlPanel\SIP
DefaultIM {42429667-.... or one of the others {42429690- {42429691-
Look in the neighborhoud HKCR\CLSID\{424296...... for the others.
Cheers
edit: In case it wasn't clear you need to fill in the whole CLSID in the DefaultIM string value. So {42429667- including the } at the end.
It should work after a soft reset (gone with a hard reset)
Any Solutions to this yet?
Thanks
Jules
I'm joining the club too
I'm on a Charmer, I used to able to change the Letter Reg SIP as default before I upgraded my ROM. I thought I'm the only one.
i'm triing to change the reg value with total commander and with wizard reg but after a restart the phone hang on white screen... someone can help me?
i want to use nullkb as default probably is not possible?
jmel said:
whatever you do, dont use registry wizard to set it... I white screened a week ago doing that, hard reset
Click to expand...
Click to collapse
hrm.....
dromico said:
i'm triing to change the reg value with total commander and with wizard reg but after a restart the phone hang on white screen... someone can help me?
i want to use nullkb as default probably is not possible?
Click to expand...
Click to collapse
cant say i didnt warn you?
jmel said:
cant say i didnt warn you?
Click to expand...
Click to collapse
yes but i make a hard reset after the first try (manually change registry with tcmd) and i try in another way...white screen in every try
lost in translation...
I was saying that if you TRY to use registry wizard to set it, you will get a white screen, and be left having to HARD RESET....
Not the best solution, but perhaps you could use my program SwitchSip to change the SIP on every soft reset. I don't know if it'll stick though, I've never tried...
V
http://forum.xda-developers.com/vie...&postdays=0&postorder=asc&highlight=sipswitch
thanks i try with your program, i never search the forum enough if i don't found your post.
i don't know why there is no possiblity to change default IM in the WM configuration.
Everything is listed here: http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other "Set default SIP"
tweakradje said:
Everything is listed here: http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other "Set default SIP"
Click to expand...
Click to collapse
I think we've all tried the method. Read the posts above carefully.
Just as a problem recap: the default SIP reghack no longer works on AKU2 ROMS. The kbd default occurs after a soft reset no matter what you have changed the registry value to.
I'm working on this one too. I coded up a program that quickly set the SIP to block recognizer and exited figuring I could just add it to the startup programs folder to switch over after a soft reset.
However, while this program works just great normally, it doesn't change the SIP when run at startup. I am working on why this is, currently. So far I've determined that my program is able to find the block recognizer SIP so the SIP dll is loaded. Tomorrow I may get a few more minutes to work on it. I'll code my program to check to see if it correctly set the SIP to block recognizer and re-attempt to change until it's successful. I'm guessing that this will have no effect on the issue since my current working theory is that the kbd default is set sometime after the startup programs run.
Guys, I don't know whether my app worked or not, but this post:
http://forum.xda-developers.com/viewtopic.php?p=317635#317635
seems to suggest it did. I don't have a wizard to test it on though
V
@vijay555:
I've got my little app set up on my today screen so I can just tap it quickly after everything's loaded to change my sip but it won't work if I drop it into my startup folder.
Perhaps this is what the poster you refer to is doing? Does your program check the default SIP using SipGetCurrentIM after you switch to see if the operation worked? Or do you just check for an error code after calling SipSetCurrentIM. Me, I'm just checking for an error currently and am not getting one.
Sleuth255: I really can't remember how I did it, I wrote it in c++ before I could program in c++, somehow. I'm on a promise to rewrite it sometime, and turn it into VJSipSwitch, for now it's merely a bastard child.
However, despite this, it's also designed to be configured as a shortcut to be launched from a hardware key or shortcut... if it becomes an issue, I'll look over the code again.
V
Hi,
I have a Treo 750v (Vodafone version) which like what it's box said it is meant for email solution, that's why the left soft menu of the Today screen menu is set to Email.
Anyone know how to change this?
Thanks, appriciate your share of knowledge!
I forgot the details but this i know as much
You have to download the register editor program. Search around the registry is all the same when it comes to changing soft key for all WM phones.
The only problem with the Treo 750 is when you change the softkey from email to something else it ends up adding an extra short cut. So in essence you are not overwriting that key, all you are doing is adding an extra feature on top of the existing email button.
Maybe someone had better success than I did can chime in
Using a registry editor, navigate to Hkey_Current_User/Software/Microsoft/Today/Keys/112
Change all 3 values to reflect your new function
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
awesome!
mtiberio said:
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
wow, thank you very much mtiberio!
your link really hit the spot!
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
tinyflier said:
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
Click to expand...
Click to collapse
It's all because Palm plugins - they overlay it. If you disable Active Call (or Dial Lookup?) you can have native-windows softkeys. It was all described in instructions how to ged back default dialpad.
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
was it:
"FdcSoft SoftkeyAppletEx.cab"
Gyngabread Man said:
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
Click to expand...
Click to collapse
it would be great if you share the file or where you get it, so we all can get it too...
mtiberio said:
was it:
"FdcSoft SoftkeyAppletEx.cab"
Click to expand...
Click to collapse
it is caled softkeyapplet but its not a cab it was a zip i just unzipped and put in my windows folder i believe... i will look in my external driveand post it im not sure where it is but i'll try to find it
ok i found it on my drive but i did some searching on the forums and alot of ppl mention it but dont upload it and im guessing its for good reason... dont wanna piss ppl off by posting something i shouldent if its ok though then i'll do it but i think its the same one your talking about for me it worked like a charm no reg editing
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Chillin said:
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Click to expand...
Click to collapse
Hi, thannks for the direct links. I'm going to try installing it. i hope it'll be fine.
seems it doesn't work with wm6. after installing it, the program isnt available in my program.
Hello,
For the past few days the (from what I gather) well-known problem of not being able to install or run an 'untrusted' application has been plaguing me. However, I've been searching here and googling around for a long time now with no result...
Been using Dutty's 5.2.19199 (WM6.1) and I really didn't change any setting! So what gives? Any ideas?Basically, how do I get the prompt back (the one during installation)?
Thanks in advance!
T
krakout said:
Hello,
For the past few days the (from what I gather) well-known problem of not being able to install or run an 'untrusted' application has been plaguing me. However, I've been searching here and googling around for a long time now with no result...
Been using Dutty's 5.2.19199 (WM6.1) and I really didn't change any setting! So what gives? Any ideas?Basically, how do I get the prompt back (the one during installation)?
Thanks in advance!
T
Click to expand...
Click to collapse
Check your registry settings! Use KaiserTweak or Schaps' AdvanceConfig!
Yes, I know it must be something in the registry, but what? And, I thought of Tweak and AdvanceConfig but -guess what? They're not authenticated! Argh!
krakout said:
Yes, I know it must be something in the registry, but what? And, I thought of Tweak and AdvanceConfig but -guess what? They're not authenticated! Argh!
Click to expand...
Click to collapse
If you are technical, try this: Download KaiserTweak's latest XML file and open the file in Notepad. Then see what registry key(s) is(are) modified for this tweak.
Ah now - that's a great idea! But, do you know of any PC-based registry editor, since I cannot install one on my TyTNII?
If you're really technical, you can follow through with cmonex's way found here.
If not, search for dot fred task manager, which includes a great *FREE* registry editor amongst other tools, much better than PHM Reg Editor, imo....
Whoa, thanks a bunch. I'll try the task manager first (found here, btw), but I'm not sure if I'll be able to run it either - the whole system seems VERY restricted! I'll try to make heads from tails with the instructions in the other thread. Thanks so much!
Btw, I do seem to remember a program that allowed you to edit the PPC's registry from Windows PC, anyone remember that?
Thanks again guys - much, much appreciated!
You can run the untrusted app, i.e. Advanced Conig. Just select yes. Then make the changes.
BTW, to view the xml, just Open notepad on pc & drop the xml in the notepad window.
No I can't that's my problem - it just flat refuses to run it, it doesn't give me the prompt.. that's why I'm asking for a PC-based registry editor!
Anyhow, I'll try it today and will let you know if I manage it!
krakout said:
Ah now - that's a great idea! But, do you know of any PC-based registry editor, since I cannot install one on my TyTNII?
Click to expand...
Click to collapse
http://www.pocketpcfreewares.com/en/index.php?soft=1399
Here is another PC based mobile registry editor. Simple to use and works well. Havent found any serious problems with it
Yes, I'm trying this right now
Btw, the registry setting seems to be:
HKLM\Security\Policies\Policies\0000101a
Value=1: disabled
Value=0: enabled
Desc.:Enable or disable the warning you get when opening a program that is not digitally signed
A small cab to disable signing-security: Download: http://www.PocketPC-Live.com/ds.cab
Try it and let me known..
Carty said:
A small cab to disable signing-security: Download: http://www.PocketPC-Live.com/ds.cab
Try it and let me known..
Click to expand...
Click to collapse
The problem with this cab (and another one I had found) is that, once the mobile goes berzerk, you can't install it because, of course, it's unsigned... Catch 22! Thanks anyway - and, by the way, superb site, added to my RSS aggregator at once!
Anyhow, I just applied the reg tweak (set to 0), reset, thing asks me to verify running unsigned start-up programs, I OK them, and then... still same problem! What the heck? There doesn't seem to be any other tweak...
krakout said:
..by the way, superb site, added to my RSS aggregator at once!
Click to expand...
Click to collapse
Thank you My pleasure to serve the pocket pc community..
krakout said:
Anyhow, I just applied the reg tweak (set to 0), reset, thing asks me to verify running unsigned start-up programs, I OK them, and then... still same problem! What the heck? There doesn't seem to be any other tweak...
Click to expand...
Click to collapse
It has to be set to 1 for disabling.. You set to 0?
Regards,
Carty..
Yes, I set it to 0; it was set to 1 (probably an earlier KaiserTweak session), but I actually wanted to get the prompt so that I could tell it that f*cking yes, I want to run/install the app!
Anyhow, been switching between 0 and 1 with no effect... Feel a hard reset coming on, but it's weird because I've found quite a few posts around (not necessarily here) and no solution...
Got the same problem after a white screen after hardspl, but changing the registry worked for me. Thanks, now I can try jumpspl.
There occured some problems after doing this registry change, please read posts below.
Ok Guys and Girls,
Because noone could help me with my questiong on howto keep the Registry settings for Hiding Sim Contacts, I searched the registry myself.
After some hours of Try&Error i found the registry entry for flushing the registry on Power off and Soft Reset.
This will help a lot
1. Go into Registry with Resco or other regedit tool
2. Find Entry: HKEY_LOCAL_MACHINE\System\ObjectStore\Regflush
3. Change Value "ActivityThreshold" from "1" to "0"
Thats it. Have fun
Please test it and post here. If it does work for all, then please write it into the Diamond Tweak list.
Bye
j_love
edit: Dont try this!! xD
jlove said:
Ok Guys and Girls,
Because noone could help me with my questiong on howto keep the Registry settings for Hiding Sim Contacts, I searched the registry myself.
After some hours of Try&Error i found the registry entry for flushing the registry on Power off and Soft Reset.
This will help a lot
1. Go into Registry with Resco or other regedit tool
2. Find Entry: HKEY_LOCAL_MACHINE\System\ObjectStore\Regflush
3. Change Value "ActivityThreshold" from "1" to "0"
Thats it. Have fun
Please test it and post here. If it does work for all, then please write it into the Diamond Tweak list.
Bye
j_love
Click to expand...
Click to collapse
I don't want to offend you, but you could have saved those hours by just making sure you search / read my articles as is also mentioned in the sticky thread. I've explained the meaning of the value at http://www.pocketpcmag.com/old_blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1 .
"ActivityThreshold specifies the # of reg activity before we force a flush; [FlushPeriod:] Timeout period for a flush (flush occurs if there have been some changes during this period)... These settings cause the registry to flush when there are 256 changes or any changes within a second(which is probably too often.)"
Nevertheless, nice to know the Diamond comes with the default value of 0 and this is why it doesn't necessarily flush back changes to the flash storage. Very few (if any) models come with this setting.
Use this with caution!!! I have problems with my registry now!
@Menneisyys
Thanks for your Article. Have read through it but didnt find it in the forum.
Maybe you can help out a little
There is a problem with my registry now.
As you mentioned the value 0 is possible but now I cant change any registry entries. What do you think happend?
Maybe you can help out. What would be the best value to set?
Maybe people where the Registry is not being flushed can look at the value of ActivityThreshold and tell us.
Thx
aff u ****ed up my device to xDDD, anyone knows how to fix this?
omg phone not working and i cant even make a hard reset or flash another rom cos it acts like a disk drive and if i change to activesync it gets changed again to disk drive after some seconds :S
I did a Hard Reset and installed my apps again.
So I think there is no other way mate No Risk No Fun *GGG*
jlove said:
I did a Hard Reset and installed my apps again.
So I think there is no other way mate No Risk No Fun *GGG*
Click to expand...
Click to collapse
yes did the same xD.Well time to flash new bepe's rom and configure it all again.
better change your first post so ppl dont make same mistake!!
It's so annoying that I get messages from the year 2010, and when I go to the inbox, all the newest messages get pushed down the bottom while the 2010 message stays at the top.
Its annoying when I go to the message sometimes it goes back 1 year, 2008 and then I have to go through the entire message and repeatedly click "Older" 100000x times to finally read the message.. Any fix for this?
Your Xperia transcendences time and boundaries - NOT.
Check your system clock.
Clock and everything is correct..
Lol try flashing another ROM?
Try this one
Incorrect SMS Time - As provided by Touch-Guy..
Create DWORD key TrustTimeZoneField and set the value to 0 under
HKLM\Software\OEM\PhoneSetting
Click to expand...
Click to collapse
I'd like to get messages from 2010...
harveydent said:
I'd like to get messages from 2010...
Click to expand...
Click to collapse
only if they include stock prices and the scores of big sport events...
Incorrect SMS Time - As provided by Touch-Guy..
Create DWORD key TrustTimeZoneField and set the value to 0 under
HKLM\Software\OEM\PhoneSetting
what do u mean by create dword key?
Use a program that allows you to edit registry, browse to the phone setting folder, and create a DWORD?
Can u recommend me a prgoram? SmartReg for me is expired..
You can use Total Commander.
It's free
I have total commander, but I don't know how to create a dword.. and there are many buttons that have no labels on them so I have no idea which one to use..
I did go to the phonesetting directory, but no idea how to create the dword or which button.. need your help!
I somehow opened what looks like create new unnamed text or sth, and after it akss to save to device or storage, is this the right one?
Still need my question answered
Im still stuck with how to create the Dword.. which button do i use to create it?