does anyone know how to use and splashscreen nbh file i tried using custom kaiser rru or something and it says invalid
and where do i find more splashscreen nbh
read more here
http://forum.xda-developers.com/showthread.php?t=334907
read that. ive already got nbh files ready to put on phone but customruu wont do it
and were can i get more nbh files
jayjay8585 said:
read that. ive already got nbh files ready to put on phone but customruu wont do it
and were can i get more nbh files
Click to expand...
Click to collapse
simple, find a photo, change its size to 240x320 pix save it as bmp file, load that file into nb_image_converter and convert it to a .nb file, open the splash tool and convert the .nb file that you just made into an .nbh, put that .nbh file into a folder with custom ruu. Run custom ruu and it will store the image onto your device as a splash screen.
Related
Hi Guys,
I am trying to flash my rom from Asia to Qtek. I have read that i need to convert the exe to usable form. I have been reading the wiki but, just cant seem to be able to do so.
just extract the exe file with a zip program
ermm.. extract from any zip program ?? i dont get u dude.. I have got the
.exe file btw, when i run the baupgrade.exe, it says device data error. i have edited my editfix.bat. When i run the .exe file direct, it says country id error.
i also used the new type I tools still, no luck
Whats meant by "convert the exe to usable form", is the exe file you download, well the upgrade exe file
I-Mate_PDA2k_French_14002_167_11200.exe this you can extract with zip.
If you download a TypeII rom, you should be able to use the MaUpgradeUt_noID file descriped here
If you download a TypeI rom, then use the xda3nbftool.exe to modify the rom to match your devicedata.exe.
Note that you must have the correct Rom password to get correct out come using xda3nbftool.exe.
Search Forum for password for the desired Rom
Greetings,
How could i extract nk.nbf from the underground WM6 rom.
Because it is needed for all Cid locked G4 and it will be helpful to everybody.
Can anybody tell me how to? I tried searching it but i didnt find any good answer.
Thanks
I think you can just right click and extract it.
You wont see it unless you are able to view hidden files.
You may have to change it from hidden to read only in order to use the file.
Hope im not spoiling anybody's secret.
Hope this helps you.
if you've downloaded a self-extracting exe you can in most cases just rename it to rar and then open the file. Otherwise just get the nk.nbf from the temp directory that the exe is extracted to...
208 error
do i need a seperate application to get NBD 8.3 to extract to phone keep getting 208 file in use error I am noob but succsefully sim and cid unlocked 8125 and have had severall different ROMs on phone. Flashed back to button love ipl/spl and then flashed TMO 2.26 rom and really want to try NBD's latest and hot new ROM any help greatly appreciated. the info on here made me think I had a grip on flashing until I hit this hurdle
This site and the chef's awsome
If you have been successfully uploading several ROMs before the NBD8.3 with the RUU works in the same way.
Included in the rar file there is also a readme explaining pretty much in detail how to run the RUU to install. Moreover you will also find some explaination on the different error codes.
You may want to download the rar file again and have a second try.
File error
Sorry bout that I was not extracting to a folder and then running the RUU that's how I kept getting the error Thanks for your help
it´s simple download the magic program called wizard service tool (WST) by mestrini, you have a icon named nbf actions, press extract nbf open the rom you want, choose the destiny folder and voilá, you have the nbf file extracted, after you haved to cook then! with all you want S.O. radio ipl or spl..
Is it easy to change boot screen, some few steps without re-flashing rom?
or some link with this topic
thanks
p.s. of course for Breeze (and is diferent size for 96dpi and 131dpi rom?)
vasek said:
Is it easy to change boot screen, some few steps without re-flashing rom?
or some link with this topic
thanks
p.s. of course for Breeze (and is diferent size for 96dpi and 131dpi rom?)
Click to expand...
Click to collapse
it is the same for 96 and 131
you will find info on hermes thread
BR
Could U post a link pls? (Or quote the solution to the question)
andrew7777777 said:
Could U post a link pls? (Or quote the solution to the question)
Click to expand...
Click to collapse
The NBH file can be decomposed into seperate .nb files for radio, ROM, Splash screens, IPL and SPl using the ROM Kitchens.
To replace splash screens:
1. decompose .NBH
2. delete splashscreen .nb files
3. create new splashscreen .nb files
4. re-package as .NBH with Breeze header
darrellr said:
The NBH file can be decomposed into seperate .nb files for radio, ROM, Splash screens, IPL and SPl using the ROM Kitchens.
To replace splash screens:
1. decompose .NBH
2. delete splashscreen .nb files
3. create new splashscreen .nb files
4. re-package as .NBH with Breeze header
Click to expand...
Click to collapse
Thx anyway but I wasn't talking about kitchen here. There r programmes that do it without re-building ROMs, for example there's TyphoonNBFTool that does the trick with Qtek8500 by just a few clicks & there's also a set of tools for Hermes like wizsplash etc. And there R similar programmes with HTC MTeoR too. I mean to disassemble the whole ROM for the sake of boot screen (which is just a picture) is a bit too much, isn't it?
just like rom upgrade! but upgrade the boot screen only! its so easy!find some image you like and make it into nbh! then upgrade with ruu! just a few minutes
hi,
I need to revert to the original state that my phone was in, the problem I have is I do not know what to do with the SPL back up file. it is a .nb file, how do I get it into a .nbh file and back on the phone?
Thanks
Hello fellow HTC-ers!
I've made a dump of my Blackstone (using pdocread -l), all seems fine. Got 4 .raw files. Now, Dr. Jay in his movie says to "get" a .nbh file. From where?? I'm confused. Read several postings about IMGFS, but those didn't help me to get to the next step.
To be precise : I want to have a flashable backup of my original (NLD : Original NLD ROM - 1.14.404.3_Radio_52.49a.25.26_1.09.25.14) ROM before I install HSPL and start cooking my own. Preferably, I want to create this original flashable ROM myself, just to get familiar with the tools and the process.
Could anyone tell me where to go from here? (4 .raw files)
Thanks.
Grt., K.
ps. when I search this forum for ".nb" or "nbh" I get no hits.. Does the searchkey have to consist of a minimum number of characters?
kkoenen said:
Hello fellow HTC-ers!
I've made a dump of my Blackstone (using pdocread -l), all seems fine. Got 4 .raw files. Now, Dr. Jay in his movie says to "get" a .nbh file. From where?? I'm confused. Read several postings about IMGFS, but those didn't help me to get to the next step.
I want to create this original flashable ROM myself, just to get familiar with the tools and the process.
Could anyone tell me where to go from here? (4 .raw files)
ps. when I search this forum for ".nb" or "nbh" I get no hits.. Does the searchkey have to consist of a minimum number of characters?
Click to expand...
Click to collapse
Please read and use this very usefull tool from here: http://forum.xda-developers.com/showthread.php?t=438456
You need to download an official stock rom. Copy your part1 and part2 raw files and the RUU_signed.nbh (from the downloaded and extracted stock rom) into the baserom folder. You need to launch the BlackStoneKitchen.cmd from the rom kitchen folder and follow the on-screen instuctions: extract the content (push e then b), then re-cook it (push c then a).
thanks, tsummer.. I've downloaded the kitchen and the original stock ROM's a few weeks ago. The stock package consisted of 4 .rar files, extracting to one .exe file. No .nbh! So, where should I get it from? If I start the .exe, an application pops up, wanting to flash my device.. The thread you posted does not shed any light on where to obtain or how to extract the right .nbh file..
I really read in to this stuff, but somehow the whole "getting the .nbh-file" remains foggy to me. Please advice.
/edit : I've got a "RUU_Signed.nbh" from a zip called "Restore_Stock_SPL_114_2.zip". Is that the right one? It's 513 KB (526.193 bytes) big. Question remains : How should I extract the existing .nbh from my running ROM / Device?
Found it!
To get the .NBH file from a Stock ROM .exe file, right click the .EXE and select "Extract Files..." from your rar-quickmenu!
Wow.. took me "only" 8 hours to figure this one out...
*shame* dr.Jay does explain it in his movie "rebuilding".. ouch.
kkoenen said:
thanks, tsummer.. I've downloaded the kitchen and the original stock ROM's a few weeks ago. The stock package consisted of 4 .rar files, extracting to one .exe file. No .nbh! So, where should I get it from?
Click to expand...
Click to collapse
Open the exe with winrar and you will see the RUU_signed.nbh (this is the correct nbh). Copy this nbh into the baserom folder and use the BlackstoneKitchen.cmd.
[/QUOTE]/edit : I've got a "RUU_Signed.nbh" from a zip called "Restore_Stock_SPL_114_2.zip". Is that the right one? It's 513 KB (526.193 bytes) big. Question remains : How should I extract the existing .nbh from my running ROM / Device?[/QUOTE]
The SPL in an another issue.
I was just wondering if I wanted to re-cook a rom such as Dutty's or L26 to add one extra package is that the same procedure as above assuming I dump their rom from my device?