Ok can somone please help me with the PDXE???
So this is whats happeneing . . . I encode everything correctly, and I make sure the output goes straight to the " My Documents" folder for my wing.
I see the encoded file "ONLY" on my laptop, in which the "My Documents" folder is opened for my wing. but when I go to the "My Documents" on my wing the files are not there.
And yes I do have the tcmp and when I go to open files it doesnt show . . . no files. . . . And yes the encoded file does have an extension ".avi"
Is there anything I can do, because I would really like to enjoy my movie(s).
And the same thing also happens on my pocket snes . . . But I have to zip the files and when I attempt to open them, the controller pops up with a black screen then cuts back to where I opened the application . . . the my documents folder.. . . Whats wrong??? as of now my wing is more like a fin.
is tcpmp associated with avi files?
does the file show up when you use the file explorer on your device?
im guessing here but, usually a movie is far too big to fit in the 'My Documents' on your device. Make sure your output goed to the storage card, not the my documents.
Well it shows all the files that are able to be played on the tcmp its shows roughly around 20 I think.
are you converting big movies or small clips?
Its a movie, And I have enough space to store it to the phone because I just did that pagepool thingy . . .
there are some codecs for tcpmp. maybe your movie needs it
Related
Hi,
I want to view streaming media files, so have download the TCMP cab and also the flashbundle cab to my desktop and then I copied them to my storage card on my Kaiser. However, they are not showing up as programmes in my programme files. I must be doing something wrong, but can't figure out what it is.
You need to run the CAB files on the Kaiser to actually install the programs. Navigate to the files using file explorer on the Kaiser and then tap them to open the CAB files. This will then kick-off the install process. Just follow the instructions from there; you'll have the choice of installing to main memory or the storage card.
Excellent, much appreciated !!
Well, I am pleased to announce that I can now stream videos, thanks to the help of this forum.
I have one other question though. When I stream a video, the playback pauses on a regular basis (and shows the coloured wheel) before resuming playback. Is there a cure for this?
rienzi said:
Well, I am pleased to announce that I can now stream videos, thanks to the help of this forum.
I have one other question though. When I stream a video, the playback pauses on a regular basis (and shows the coloured wheel) before resuming playback. Is there a cure for this?
Click to expand...
Click to collapse
i believe that just happens because ur streaming teh video...it needs to load...just like when u watch videos on ur computer live it needs to buffer
I know this error has been mentioned on these boards but it seems to always have been in conjunction with youtube. In my case, I signed up to wauw.com to stream music from my PC and everytime it launches on my phone it uses Realplayer. Is there any way to force it to WMP or Pocket Player?
Do you know the stream format? Sometimes it will download a .m3u playlist file to \My Documents. If that is the case & you can find the .m3u in \My Documents you can change the association easily with a good file explorer like resco. If the file is there, click & hold on it, then select open with & make sure to check the "always use this program to open this file type" check box.
Otherwise, let me know the format & I can possibly help you.
No clue but I have m3u associated to Pocket Player. I decided to use Orb instead of Wauw which works fine with Pocket Player. Thanks anyway.
Hi All,
A few days ago, a client of mine brought me back his diamond saying that the music player was not working.
After more than 8 hours of trying to fix this issue by trying everything I could find on this forum and every possible solution my imagination could think of, I'm left no other choice than asking the community for help.
When ever I put a large amount of files on the storage card (around 3Gb) and use the TF3D interface to play the music, Audiomanger_eng.exe crashes (sometime other files crash but I forgot the names).
Now, I have tried pretty much everything:
1. I tried both WMP 11 to transfer the files and the direct copy/paste of the files to the storage card.
2. I tried putting another set of songs coming from a different PC
3. I tried having all the songs together in the same folder (that caused even more issues as album arts were overlapping) and I tried the WMP function to get each songs in its correct subfolder (ie: artist... Album...).
4. I tried deleting the database file of the AudioManager (which causes it to rescan all the files which it does but then crashes as it tries to play certain songs)
5. I tried on two different Diamonds, using 1.93 in English (HK), 1.93 in French, TOM_DiamondProject_v3.2, Dutty's latest rom. Through this I tried the original HARD SPL of HTC and also Olinex and another guy's one. (All the test I did using these various ROM created approximatively the same error though varied slightly from one ROM to the other)
6. I have also tried a million soft reset and hard resets.
7. I have tried loading the music in Windows Media Player Mobile which works perfectly but does not change anything to the problem I have with the TF3D player.
8. Following stevedpl7's comment, I went in the file explorer, created a new folder called My Music, then I cut and paste all the music from Storage/Music to Storage/My Music, went to the application data/HTC/AudioManager_eng/ and deleted the database file: AudioManager_Eng.vol, then I did a soft reset. When I now go to the music Tab, it crashes before I even get a chance to play a song. In the music list, I can see all the transferred files.
9. And many other small things....
Any idea or suggestions?
Just a quick question about where you are putting the music files?
I have exactly the same problem if i save my music foldes to Internal Storage\Music (which is where WMP saves them by default)
However when i created a 'My Music' folder in the Internal Storage\My Documents All worked fine. So Try....
Internal Storage\My Documents\My Music\''your music here''
As i said you may well have to create the 'My Music' folder, on my Diamond only My Pictures and My Videos were there by default.
Hope this helps.
I have the same problem, the only thing I can put it down to is the new 1.93 ROM from HTC, as it was working fine until I flashed the phone with this ROM.
I have tried the solutions above and it still isn't working, so if anybody else has further ideas please let me know, if not I'll wait for the official word back from HTC and post their solutions up here also.
Sadly, it didn't work either for me
Thanks you Stevedpl7 for the info, sadly I have tried and the problem even got worse
I went in the file explorer, created a new folder called My Music, then I cut and paste all the music from Storage/Music to Storage/My Music, went to the application data/HTC/AudioManager_eng/ and deleted the database file: AudioManager_Eng.vol, then I did a soft reset.
When I now go to the music Tab, it crashes before I even get a chance to play a song. I the music list, I can see all the transfered files.
Are those files made from scratch on your or the customer's PC, or were they downloaded from the Internet? I know that some downloaded MP3s are defective, furthermore some players do not understand all variations of the MP3-format like VBR, joint stereo et al. There is no strict "standard" for MP3, the technology has developed over the years and no one has made an attempt to define "levels" as they did with MPG-2 or with DivX. So there is always a level of uncertainty whether a player is able to play all files. A resampling with a MP3-software or even converting them from MP3 to WMA might help.
It's always a good idea to use WMP on the PC to create MP3 or WMA. Not because it excels in quality, but because it uses very standard features in the format.
Have fun!
Lost_in_translation said:
Are those files made from scratch on your or the customer's PC, or were they downloaded from the Internet? I know that some downloaded MP3s are defective, furthermore some players do not understand all variations of the MP3-format like VBR, joint stereo et al. There is no strict "standard" for MP3, the technology has developed over the years and no one has made an attempt to define "levels" as they did with MPG-2 or with DivX. So there is always a level of uncertainty whether a player is able to play all files. A resampling with a MP3-software or even converting them from MP3 to WMA might help.
It's always a good idea to use WMP on the PC to create MP3 or WMA. Not because it excels in quality, but because it uses very standard features in the format.
Have fun!
Click to expand...
Click to collapse
They are mainly downloaded MP3s and a few WMAs. When I transfer the files using WMP, some are converted. The thing is that all these files work fine in Windows Media Player on the Phone.
I just realised that there is a possibility that if your MP3's has the album artwork embedded into the files. the audio manager would crash.
currently i'm doing a trial and error of it and have yet to fully test everything out just yet.
would anyone like to comment or verify if the embedded artwork might be the cause of crashes?
I think you are right. I have tried putting one song with the artwork embeded and it crashes the software!!!
erm. and yet. i did manage to sneak in one album with an embedded artwork. :\
but that was 1. i tried it with another album with the embedded artwork and had a crash.
I'm now thinking about giving up and installing TF3D config tool to hide the music tab and then install the old audio manager to play the music
http://forum.xda-developers.com/showthread.php?t=407145&highlight=audiomanager
http://forum.xda-developers.com/showthread.php?t=405749
This is painful...
just spent 3 hours trying to figure out which mp3's work and which doesnt.
like wth... i dont get it. someone please assist in explaining how audio manager works ?
Same problem here, anyone knows how to solve this?
Note even the original demo tunes work
Audiomanager worked fine before (1.37 ROM), but when I updated to 1.93.413.3 SVE not even the "built in" demo tunes work. It just hangs on the first tune... Removing the .vol file does not solve the problem. Windows Media player can play the tunes without problems.
Use MP3Tag to mass delete all coveralbum info from your MP3 files on the PC side and then resync everything back using WMP. This solved all freezing problems with the TF Audio Manager for me. MP3Tag can be found here: http://www.mp3tag.de/
coredump said:
Use MP3Tag to mass delete all coveralbum info from your MP3 files on the PC side and then resync everything back using WMP. This solved all freezing problems with the TF Audio Manager for me. MP3Tag can be found here: http://www.mp3tag.de/
Click to expand...
Click to collapse
Confirmed that this method does work
Works but people embed album art coz they want it to show up in the AudioManager in the first place. Now the only way to do is, is to extract the album art, rename it to folder.jpg and put it in the song's album folder. This is a really huge hassle especially if u've got tons of files embedded with album art....
Did you find a solution in the end ?
This issue is not tolerable for such a ppc... .
So if I happen to copy too many albums or mp3 files, my phone would crash and won't be the music ?
cornwall said:
Did you find a solution in the end ?
This issue is not tolerable for such a ppc... .
So if I happen to copy too many albums or mp3 files, my phone would crash and won't be the music ?
Click to expand...
Click to collapse
U have to remove your embedded album art from your mp3 first before transferring, and then extract that album art and put it in the same folder as the mp3 with the name folder.jpg. A huge hassle for people who have a huge collection of mp3s with embedded artwork.
Anyways, I've written to HTC Tech Support about this and "strongly suggested" to them a ROM update for this issue.
Audio Manager crash with mp3 in VBR mode ! I've converted my mp3 in CBR mode, and all went ok !
Is there a better solution to this than removing the embedded artwork?
Greetings.
I have a problem putting movies on my diamond. I use activeSync, try to put movie on it but it says "convereting (none)".
Whats the problem? I have Combined community codec pack on my computer.
Thanks in advance
nutcracker2 said:
Greetings.
I have a problem putting movies on my diamond. I use activeSync, try to put movie on it but it says "convereting (none)".
Whats the problem? I have Combined community codec pack on my computer.
Thanks in advance
Click to expand...
Click to collapse
what format are the movies?
cant you just drag and drop them into your internal storage?
nutcracker2 said:
Greetings.
I have a problem putting movies on my diamond. I use activeSync, try to put movie on it but it says "convereting (none)".
Whats the problem? I have Combined community codec pack on my computer.
Thanks in advance
Click to expand...
Click to collapse
Are you saying you are trying to get ActiveSync to convert your movies to a playable format?
EDIT: Yeah what rumple said- just drag and drop them to your internal storage.. Little confused by your original post.
Movies are in *.avi format. Last time I did it, I dragged and dropped them on my internal storage and the active sync program from windows XP converted it by itself, now it doesnt want to.
edit: I did that yes, but its not being converted anymore. Now it looks like: the copying line goes to 30% and then get back to 0% again and it repeats all the time.
nutcracker2 said:
Movies are in *.avi format. Last time I did it, I dragged and dropped them on my internal storage and the active sync program from windows XP converted it by itself, now it doesnt want to.
edit: I did that yes, but its not being converted anymore. Now it looks like: the copying line goes to 30% and then get back to 0% again and it repeats all the time.
Click to expand...
Click to collapse
When you rip the movies from DVD you should make the AVI with optimum settings for your diamond. This way you will not need any conversion again when copying files over and have the best quality and appropriate size for your device.
as for why your file transfer keeps going back to 0% i dont know, but you could use a file explorer on your phone to see if the file size of the movie you copy is increasing (because the file is still copying) then you could tell if the percent reading is a bug or if it is true, because maybe your file is still copying OK.
File is still copying good when I use file transfer.
And I put not movie from dvd, just some other downloaded movies.
But still, I shouldn't require to convert it by myself. ActiveSync should do it by itself.
can anyone help me?
i have never had anything actually convert when using Activesync to copy files over...
copied a 702mb .avi to it yesterday (using activesync), then copied back off (using Diamond as a USB stick) and it hadnt changed at all!
it says "converting and copying" but i have never had and files (pictures, videos, Word Documents etc) change...
I'm using TLR 3 rom, maybe thats a problem?
I'm still lost as to what conversion you think is taking place with ActiveSync.
Download, create, or edit the video on your computer. Hook up your diamond, and copy the file over to the internal storage in the phone.
Disconnect the phone, bring up media player and watch the video.
Unless I'm misunderstanding you somewhere it should be as simple as that.
You said you have community codec installed on your PC, but that has nothing to do with ActiveSync.
Unless ActiveSync has some secret video conversion talents I am unaware of, it is simply just going to let you transfer the ready to play file to the memory on the phone.
Well. You put the file on your phone while being ActiveSync'ed and there pops up a window where it shows converting and copying loading bars. The whole conversation takes place in windows media player becouse ActiveSync uses it for converting. But even in windows media player the file doesn't want to be converted.
---
And I belive your codecs affect converting, becouse without good ones - conversation won't be possible.
nutcracker2 said:
Well. You put the file on your phone while being ActiveSync'ed and there pops up a window where it shows converting and copying loading bars. The whole conversation takes place in windows media player becouse ActiveSync uses it for converting. But even in windows media player the file doesn't want to be converted.
---
And I belive your codecs affect converting, becouse without good ones - conversation won't be possible.
Click to expand...
Click to collapse
Do yourself a favor and download Super C http://www.erightsoft.com/SUPER.html
Use it for your conversions then just copy your movies to the Diamond and be done with it.......
I downloaded some ringtones a while back. The majority of them were mp3d files. They worked for my phone ringtone, my new text notifications, or pretty much everything I needed them too and I could listen to them in the Windows Media Player on my Kaiser.
Just today, my phone crashed or something. Basically, it just stopped working. The screen went Red, Blue, Green, across the top half, and the bottom was white and sometimes it would say "Serial." I took it in and they gave me a new one because I was still under warrantee.
None of those ringtones work now. They won't work in Windows Media Player and when I put them in the "Ring" folder, they show up in the list, but don't play when selected in the "Sounds and Notifications" menu.
Does anyone know how I can fix this? I can't even open the ringtones up on the computer and try to convert and I can't find a mp3d converter anywhere.
Is there a codec I can download, or a converter, or anything?
Thanks ahead of time.
One solution maybe to download a program on your pc that can play mp3d files (maybe winamp can?) then restart your pc once you've found one that plays em. Once restarted the file type should be in your file types list. Then in Activesync navigate to Edit file conversion settings and select mp3d files to be converted to mp3 files when you sync them to your phone. Im not 100% sure if this would work as the activesync file converter is probably very basic, Good luck though!