I this little program but have been having some problems with it. The main problem is that it will not connect to the Tilt. I have the Tilt hooked up to the computer and can see it under my computer but it will not connect and I just redid my computer this weekend. I remember when I was running NOD32 it was interefering with the phone's ability to connect to the computer. I remove NOD and it connects to the computer but Jeyo Mobile refuses to connect. It's perpetually trying to connect. Any ideas?
I've used it for some time, but never had any kind of trouble with connection so don't really know how to help...
Related
Hello guys,
I was wondering if you could help an extreme newbie.
I just got my tilt a couple of days ago, and with the help of a friend i have installed Dutty's touchflow rom. My problem is the following:
I have a Sony Vaio laptop that connects to the internet wirelessly through my wireless router. My tilt also connects to the internet through the router. However if i connect the tilt to the vaio for an activesync or to charge, the wireless connection on the laptop crashes. It crashes even if the wifi on the tilt is turned off. It can only be restored if i disconnect the phone AND restart the computer.
Did anybody face a similar problem?
Any help would be appreciated.
Thanks.
It's an activesync issue.
When not connected to the PPC , Right click on AS icon in the PC.
Select Connections.
on the bottom you will see.
"Allow wireless connection......"
Mark the check box and your good to go
Nadavi
Hey buddy,
Thanks very much for responding. Tried it but unfortunately no joy. Its like my laptop loses the ability to connect to the router. I can see the connection but it just stays there, tries to get an ip, gets one and then crashes again...
Any other ideas?
what nadavi said, helps when you have problems connectin at your phone not your laptop.
perhaps your problem hs to do woth your network-configuration. AS gives a bridged network-interface trough to your mobile phone, connected via AS.
eventually your real-network-interace-driver or something else has problems with thi network-bridging ... did you tried to install AS 4.2 instead of 4.5 or otherwise?
aalexandrou said:
Hello guys,
I was wondering if you could help an extreme newbie.
I just got my tilt a couple of days ago, and with the help of a friend i have installed Dutty's touchflow rom. My problem is the following:
I have a Sony Vaio laptop that connects to the internet wirelessly through my wireless router. My tilt also connects to the internet through the router. However if i connect the tilt to the vaio for an activesync or to charge, the wireless connection on the laptop crashes. It crashes even if the wifi on the tilt is turned off. It can only be restored if i disconnect the phone AND restart the computer.
Did anybody face a similar problem?
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
I bet you have a Intel 2195 or 2200BG wireless adapter in the notebook? There is a problem with some of the drivers for the adapter and Activesync that makes you wireless network disconnect when you plug your phone in for sync. I had the same problem on my former laptop, it went a way with a driver downgrade!!! if I remember correct
Another way of solving it was installing Trend Micro PC-illin 2007 Internet security. It installs some sort of driver that made it work, it sound crazy I know but it worked with that - I and more people that I know got it working that way but I dont´t like Trend Micros software
Hey easycure,
Thanks for this response. I took your advice and went the opposite direction. I do have a 2200BG adapter, but rather than downgrade, i upgraded the driver.
Worked like a charm. Thanks!!
@edi - thanks for your reccomendation too. In the end i did not need to go that way, but thanks all the same.
aalexandrou said:
Hey easycure,
Thanks for this response. I took your advice and went the opposite direction. I do have a 2200BG adapter, but rather than downgrade, i upgraded the driver.
Worked like a charm. Thanks!!
@edi - thanks for your reccomendation too. In the end i did not need to go that way, but thanks all the same.
Click to expand...
Click to collapse
Yeah it might have been a driver update I did, it was two years ago I had that laptop so I cant remember exactly But I am happy that it fixed it for you - I do remember how frustrating it was
I am having the very same issue. When I connect my Kaiser via activesync the wireless status information immediately appears on my laptop. The internet connection then stops working or only occasionally works. Took me an age to find a related thread! I'm about to update the drivers for the 2200BG adapter so I hope it works!
Cheers
I have been using WiFiRouter successfully to connect my Windows laptop to the Kaiser. Works great. I recently got a MacBook Air and attempted to connect it as well. The Mac recognizes the WiFiRouter when it searches for wireless networks but it registers it as a device, not as a network. I don't know how to make it connect through the "device".
Any thoughts?
michalopoulosgk said:
I have been using WiFiRouter successfully to connect my Windows laptop to the Kaiser. Works great. I recently got a MacBook Air and attempted to connect it as well. The Mac recognizes the WiFiRouter when it searches for wireless networks but it registers it as a device, not as a network. I don't know how to make it connect through the "device".
Any thoughts?
Click to expand...
Click to collapse
It works great on mine. I just connect to the device anyway - and it routes to internet regardless.
Any specific question on this one that I can help with?
-Daniel
Since I am a neophyte in the Mac World perhaps there is someting I need to do with the Mac itself. The WMWiFirouter works well with my windows laptop. The Mbair (airport) senses it sometimes and it lists it as a device. When I tell it to connect, it does not do it.
Could you please tell me what setup are you using with the Mbair that makes the difference? Is there any particular setting in the System Preferences that I need to set to make it work?
Thank for any help!
I was able to connect by uninstalling the old version of WMWiFiRouter and reinstalling the new one directly from the website. I went through right away.
I connected Kaiser (AT&T carrier) to the Macbook Air using the usb port. There was no recognition or reaction to the phone. I wanted to use it to connect to the Internet. Then I established a Bluetooth connection to use it as a modem. The phone was recognized, but every time I ried to connect I was told that a connection is "crossed". Then I tried WMWiFiRouter. Mbair recognized it as a "device" but when I tried to connect to the Internet with it, it would not work.
Is there a way to use Kaiser as a modem for the Mac? What are the Mac settings recommended? Are there any specific Kaiser settings that need to be in place?
Thanks for any help and advice.
In replying to my own question:
I was able to connect perfectly through WiFiRouter by uninstalling the old version of WMWiFiRouter and reinstalling the new one directly from the website. It connected to internet right away.
I just got a tilt and tonight, at work, I plugged it into one of our machines through the usb cable. Don't know if it is relevant, but we run linux here at the office. IMMEDIATELY after connecting phone, my wired connection to the pc got killed. Have rebooted pc and still nothing. The network is not down cause i can connect to other pc's on the network, but no internet. Im sure it was the phone because I tried it on another pc here at the office to see if it is the phone, and immediately after connecting the phone to the 2nd pc, the internet immediately went down. PLEASE HELP! Any ideas to why it does this. How can I fix it? Thank you!
The problem has been fixed. What it does it corrupt the /etc/resolv.conf. No idea why it did this???? Any ideas?? I don't want to connect my phone to the pc until I can figure out why it did this? Thanks
I'm trying to set my laptop up to use the td2 to get a connection to the internet. can this be done either via bluetooth wiFi or USB. I have tried to add a bluetooth network connection but the laptop keeps giving an error saying could not connect to the remote device.
When I plug mine into my laptop via USB, I get an option on the device to 'internet share'. Does this not happen for you? I'm not sure whether Windows Mobile Device Center is also needed, but it may be!
I did this today using a Macbook. The USB did not work on the Mac but Bluetooth did. I had to connect to the phone from the computer using ordinary bluetooth first (without network). Then I had to choose Internet Connection on the phone using Bluetooth PAN - which I assume is Bluetooth network. Also had to select Bluetooth PAN on Macbook - was a bit fiddly but it worked. Anyway it does work with USB on the PC see post 16 of the thread here.
cheers both, i will check out the other thread but when I connect the phone via USB to this (work) laptop, I get nothing. My home one uses Vista and Mobile Device Centre, but my work one uses XP.
typically, after a reboot the phone gives of the option to shart internet sharing but the laptop wants to install a rndis connection, but the only way to do this is connect to internet. ironic.
Ok, finally have a proper Interenet connection and downloaded Activesync 4.5 from MS. This looks like it will resolve the situation.