Related
On my old ETEN M600 (RIP) I had a phone pad app/skin that gave me big buttons and when a dial button was pressed the phone vibrated for a 1/4 of a second. It was great physical feedback to feel that little blip when a button was pressed and I believe it allowed me to dial numbers quicker. Anyone know of a app that enables this for the Tilt/Kaiser?
And yes I did a search for this before I posted a new thread.
Thanks
OT
How to set up one button press on/off with device and screen locked
Also for those that are interested. I have AE Button Plus, Ilauncher and DeviceLock by Matt Armstrong installed on my Tilt. The combination of these programs allow me to program the left softkey to turn off the Tilt. Matt's Devicelock auto locks the phone and prevents any other buttons to be pressed. When I want to use the phone I can press the left hard key that corresponds with the left soft key and that turns on the phone and unlocks it with one button push. This set up gives me one button off/on and all other keys and the screen is locked from accidental button pushes. Now I just wished that Devicelock would shut off the phone after 10 seconds if not unlocked. Right now my phone is in my pocket and if I accidentally push any button other then the left hard key my screen will turn on in a locked state and time out only after 1 minute if no other buttons are pressed. I would like it to turn back off faster.
BTW Thanks Matt
Not an app but it can be done with registry tweaking:
[It involves modifying registry keys so beware].
Navigate to HKCU\ControlPanel\Sounds\
In here there are a bunch of keys named Dtmf which represent all the keypad keys [0-9, #, *]
Rename Standard DWORD parameter Sound to Sound1
Create new String Parameter Sound
Assign value *vibrate* to this new parameter.
Save and exit, test it, then go back and do the same for all your keys, sorted.
A .cab for this?
Is there a .cab floating around for these reg settings?
It would be a great contribution to the community if someone could whip up a cab to make these reg changes ;-)
Wow, now that was usefull. I had installed some small prog to do the same, but it didn't work great. It wouldn't vibrate unless you pressed for a more than 250 ms. This mod vibrates immediately! Thanks!
someone should tell Kaisertweaks that that needs to go in
Here you go, working great on the TyTN II
That's what I'm talking about
Gizmo5148 said:
Here you go, working great on the TyTN II
Click to expand...
Click to collapse
Thanks Gizmo!
I love this place. Where would WinMo be without xda-developers???
Any chance you could upload the .cab directly instead of zipped? For some reason it won't extract on my tilt and I can't get to a PC tonight.
Thanks again.
Sure thing, here you go
Installed and it is working great. This is really a great tweak!
aren't dtmf tones what are used for things like voicemail and such? like "press 7 to delete" it recognizes the sound? does this affect that at all?
I don't think this tweak has any effect on dtmf tones. I just tried my VM and everything worked as usual.
strange...i installed this on my tilt (htc rom) and when i touched a button there was no vibrate, until about 5 seconds later, it was delayed i guess, and after that i never felt another vibrate, even after a few resets.
bump.
would like to get this working.
Will this make it beep and vibrate or just vibrate? It would be cool it it could do both at once!. Also, maybe post cab to revert back to just the sound in case anyone wants to change it back?
Mikeeey,
Try holding the number down a little longer. If you just touch it, it will display the number but not vibrate.. I had the same trouble also.
I do appreciate the afford, but shouldnt it just work when it notices a keypress, not a long keypress.
You have to hold it for a little time. Thats how it works
Gizmo5148 said:
You have to hold it for a little time. Thats how it works
Click to expand...
Click to collapse
That's how the cab file works. But when I did the registry edits as listed in the 2nd post, then it is an immediate vibrate. I used to use the cab file version. I removed that and went with the direct reg edits. Now it vibrates immediately.
jomo25 said:
That's how the cab file works. But when I did the registry edits as listed in the 2nd post, then it is an immediate vibrate. I used to use the cab file version. I removed that and went with the direct reg edits. Now it vibrates immediately.
Click to expand...
Click to collapse
Same here, works great after manual reg edit.
dalewinterstein said:
Mikeeey,
Try holding the number down a little longer. If you just touch it, it will display the number but not vibrate.. I had the same trouble also.
Click to expand...
Click to collapse
thanks for pointing that out dalewinterstein, it works for me now.
i did the manual reg edit to try and make it respond faster but it doesnt, actually the keys lighting up after being pressed dont respond fast enough to my presses, does this happen for anyone else? i mean if i hold it just a bit longer it will light up and vibrate but im normally faster than that.
I have searched the forums long and wide for it and I cannot find it. Is it simly cooked into roms as an oem package or is there an actual cab we can install for those that are using prebuilt roms?
look here
http://forum.xda-developers.com/showthread.php?t=356192
read the first post. I think you will have to create the Long_End.lnk and assigned it to EndKey.exe
this may also be of interest
http://forum.xda-developers.com/showthread.php?t=356322
i'm pretty sure you didn't try the advanced google search. Please use that next time. Searching endkey cab on there gave me a bunch of searches on this thread.
http://forum.xda-developers.com/showthread.php?t=344533
Here you go...
long press delay
is there a way to change the durations of long press?
I think it takes too long for along press end key and long press power keys to work.
I can't seem to find the registry entry where to change.
Any help is appreciated.
thanks
K
thomassster said:
i'm pretty sure you didn't try the advanced google search. Please use that next time. Searching endkey cab on there gave me a bunch of searches on this thread.
http://forum.xda-developers.com/showthread.php?t=344533
Click to expand...
Click to collapse
I actually think he wants "long press power key". That is the one that is cooked into numerous roms. If you search for long press end key, or HTC end key, you will find plenty of threads. Long press power key is a different story.
Edit: Ok I think I was wrong. Long press power key is by Schaps. He wants the long press end key mapped to the red end call button. If you install it normally, which is what you get 10000 threads on if you search, it installs it to the right soft key.
marm0lade said:
I actually think he wants "long press power key". That is the one that is cooked into numerous roms. If you search for long press end key, or HTC end key, you will find plenty of threads. Long press power key is a different story.
Click to expand...
Click to collapse
All you have to do for any of the long or short keys is change the .lnk shorcut name to Long_Power.lnk or Short_Power.lnk or Long_Send.lnk or Short_Send.lnk or Long_End.lnk or Short_End.lnk, etc. etc. etc.
If you rename or create a shortcut name as above & point it to the program you want to run & then place it in the \Windows directory it will work.
You don't need a cab, or any configuration tool.
I know something much better:
AE Button Plus http://ae.inc.ru/aebplus.php, you can give any button a long press function of even a double/triple click function.
You can use it for free.
I use the Internet buttons double click for toggling bluetooth, the Email buttons double click for toggling WiFi, the left softkeys press+hold for devicelock and the enter keys press+hold for AltTab.
You know you can do all of that without adding a few more mb's to your system & another startup app. AE Button works don't get me wrong, but it's not for me since I can accomplish everything it does already from the registry. (The keyboard driver contains all kinds of neat shortcuts you can use, you only have to disassemble it to see). It's great for a novice though.
There is another easy way to configure this. (No need to install HTC End Key)
Install Schaps Advanced Config.
Then go to Menu, Key Mapping and choose what you want for Long Press Send Key, End Key and Power Key.
johanromijn said:
There is another easy way to configure this. (No need to install HTC End Key)
Install Schaps Advanced Config.
Then go to Menu, Key Mapping and choose what you want for Long Press Send Key, End Key and Power Key.
Click to expand...
Click to collapse
I did this but everything except the first two (left and right softbuttons) are grayed out - I can't change what's there. What am I doing wrong?
Mike
same here..any solutions?
johanromijn said:
There is another easy way to configure this. (No need to install HTC End Key)
Install Schaps Advanced Config.
Then go to Menu, Key Mapping and choose what you want for Long Press Send Key, End Key and Power Key.
Click to expand...
Click to collapse
Wow - I've been using Advanced Config for ages (consider it essential) but had no idea it handled key mapping. Good to know.
I just tried it on my problem though and it's a no-go. My problem is that HTC End Key is cooked into the ROM I'm using and neither remapping through Advanced Config nor manually adding a shortcut (in this case ArkSwitch.lnk renamed as Long_End.lnk) works - the stupid HTC End Key programme just pops its ugly head up instead offering me a handful of useless options I can't change.
Any ideas? I'm using a 6.5.x ROM so HTC Task Manager doesn't work and ArkSwitch doesn't always open when clicking the title bar, due to the notification drop down, and I need quick access to a task manager.
Btw I use my phone's GPS for work a lot (in landscape mode) so Long_Send is already mapped to Rotate Screen.
Can anybody help?
IS there a small piece of software to remap the softkeys on the home screen in TF3D? There are several useful functions that could be placed on the home screen other than the default Phone/Programs. I've tried using the Remap Softkeys for WM5 but obviously that doesn't work with TF3D, and I don't want to disable Touchflow just to get altered keys.
nubbin said:
IS there a small piece of software to remap the softkeys on the home screen in TF3D? There are several useful functions that could be placed on the home screen other than the default Phone/Programs. I've tried using the Remap Softkeys for WM5 but obviously that doesn't work with TF3D, and I don't want to disable Touchflow just to get altered keys.
Click to expand...
Click to collapse
try this
In a registry editor, go to:
HKLM/Software/HTC/manila/
HomeLSKPath, which is the left softkey (Standard = Phonepad)
And
HomeRSKPath, which is the right softkey.
If you change these with the location of the programs you want to link to, and simultaneous change the names:
HomeLSKText = Left softkey text
And
HomeRSKText = Right softkey text.
Thanks very much - worked a treat!
I'm trying to remap my softkeys on the People page. I want FunContact as my primary contact manager launchable from that page... cant seem to get it done with the technique used here... I had to create a new key for it but still nothing after soft reset
any help would be GREAT! Thanks
itsallsubliminal said:
I'm trying to remap my softkeys on the People page. I want FunContact as my primary contact manager launchable from that page... cant seem to get it done with the technique used here... I had to create a new key for it but still nothing after soft reset
any help would be GREAT! Thanks
Click to expand...
Click to collapse
i second that!!!
default contact is hard to use and scrolling is suck!
Try this link, it has more info about remapping soft keys in Manilla (TF3D) and also (TF2D)
http://forum.xda-developers.com/showpost.php?p=3292483&postcount=2
or the whole thread which has other good info.
http://forum.xda-developers.com/showthread.php?t=480475
Hope this works for you!
so this is for the right soft key:
TouchFlo 3D right softkey:
HKEY_LOCAL_MACHINE\Software\HTC\Manila
HomeRSKText = Text on softkey
HomeRSKPath = Path to program to run (or blank for default)
what do i put in the open "open" part so i can have my contacts open? and for the text to i just set it as "Contacts"?
Click to expand...
Click to collapse
its Windows/AppButtons/Contacts.lnk
I can't get it to work
Okay ... I've read all the post that I could find about changing the softkeys and nothing seems to work. I've changed the registry settings as indicated but still no go. I have the TMO TP2. I only want to change the home page so don't need anything fancy. Been updating the registry settings (HomeLSKText, HomeLSKpath, HomeLSKArguments) and can't get it to actually do anything (the text changes). What I want todo is to jump to the Contacts HTC page (really anything other than the Camera - why TMO did you make it Camera?). Any help would be great. Thanks.
i would like to know if its possible to remapp the tilt's PPT button to change the screen to landscape mode and vis versa. any help would be great,
-thanks
did u do a search be4 posting this?
its done by going under ur settings,clicking on buttons and reassigning button six to screen rotation.
thesire said:
did u do a search be4 posting this?
its done by going under ur settings,clicking on buttons and reassigning button six to screen rotation.
Click to expand...
Click to collapse
I did search, but everything i found required editing of the system files and registry and stuff. I was looking for a simpler way. Thanks.
If you're using an AT&T ROM, you have to do the registry stuff to remap it. I don't know much about this since I use an HTC ROM. Once that's done it can be set in the buttons settings since the orientation change is one of the choices there.
WM6.1 lets you remap keys in the settings menu.
I have tried searching for a long time on this because I know I've seen it before, but I can't find it anywhere.
Where is the mapping of the right soft key in the registry? I'm using itje's Touch-IT v3.01 and can't find it anywhere. I don't want the right soft key to be the "Today" screen, but any changes in settings do not "stick."
Hi
Use Advanced_Configuration_Tool_v3.3
Remap softkeys
Dinesh
ADC doesn't change the TF3d right key very well..
It's better to change the registry keys.
Use a decent regeditor (I use fdc taskmanager)
go to HLKM/software/htc/manila
the right and left softkeys are there.
You need to put the complete path to whatever file you want to access and enclose it in ""
HtH
Ok, so I got there, but I really don't want to map it to a path. I just want it to function like the left soft key, but on the right. I looked at the values of the LSKpath, but it is blank too.
If I changed the registry value to "<Right Softkey>" like it is called in settings-buttons-left key, would it still work? I'm a rookie with the registry although I am trying.
And I have the fdc task manager now.
try this little app, works perfect
http://forum.xda-developers.com/showthread.php?t=452505
Yeah, that tweak app lets me assign something else, but I want the right soft key to be context with what I'm running on the screen.
... but still good work! I love your ROM.
do you mean the right Hardware key then?
Yes. Sorry for any confusion... I am talking about the hardware key.
In that case again there's a reg key that you can change,
but have you tried it in the button settings control app? as I've just tried it and it works here using Itje's rom.
<Right Softkey> is one of the options and it sets it fine. Not tested to see if it sticks after soft reset but it works.
anyway reg key is HKLM/software/Microsoft/Shell/Keys/40C3
using the buttons settings control panel changes
Flags to 14 (decimal)
Default (blank as in nothing there)
HtH