Database Develop

pleeeeeeeease help my pda2k bluetooth is not working at all

my device is pda2k or BA
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.12.00
Protocol version 1337.42
ExtROM version: 1.40.169 WWE
all of a sudden the bluetooth on my device did not send or receive
i tried several times the blue light flashes always but my device cannot be seen by other devices and cannot send or receive
is there any thing to install to solve the problem ????
is there any thing to do to know whether its a software or heard ware issue?????
pleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeease help

use a registry editor go to "HKLM\Software\Microsoft\obex\" here change the value of Dword "IsEnabled" from 0 to 1. and also turn on beam while transfering.
it works for me.

thank you
thank you
but where can i get the registry editor for my pda2k
please tell me

from here
http://www.phm.lu/products/PocketPC/RegEdit/

dear krishan2207
i did it just like you said but it didnot work
please please please
any helppppppppppppppppppppppp

please help
my problem didnot resolved

u should try a hard reset or rom change.

dear krishan2207
i did the hard reset several times and
i did re install the WM2003SE after the hard reset but it didn't work
coz i find the same
today paper after re installation of the WM2003SE rom ?????????
is there any way to delete or formating the old rom ( completely ) before the installation rather than the hard reset
please help
many thanx 4 your follow up

y u r not giving a chance to wm6 or 5.

dear krishan2207
i am not afraid of upgrading
i am afraid of downgrading back to wm2003
i want to know if the extended rom return to its original setting

i think u r very new to all this.dont worry man u can return it back.

dear krishan2207
i ve changed my rom to wm6 & back to wm3 several times
but blue tooth still not working
i think it is a problem in BT driver
any help with that please
another Q ?
how can i remove my old rom completely ie not up grade or replace i want to delete my rom completely before i install the new rom
thanx 4 help
DrAsd

hv u done a hard reset after upgrade if no, chk the wike and u can not empty(completely remove) your rom. when u upgrade or downgrade ur rom all files get changed but U HV TO DO A HARD RESET. MUSTTTTTT.

i did the hard reset before & after up grading & downgrading
and the same result was found
any help with the blue tooth driver ??

Same here, tried everything
I bought a T-Mobile branded Blue Angel used at an electronic swapmeet last month. I thought the unit was in good working order as I tested the voice GSM calling ok. Now I found that the Bluetooth does not work at all. I tried upgrading to WM6 and downgrading back to 2003SE and did many hard reset all along. It'll not find any BT devices, not can be found by others. It shows up as if it is working, in the BT stack, as well as the LED, but no communication at all. I think the chip is dead.
I wonder how I can get this repaired, and how much it would cost me. It's a bummer, otherwise it's working fine.

HTC TYTN II Weird Behavior After Upgrade to 6.1

Hi Guys,
thanks for the good job you'all are doing. Will appreciate whatever help i can get to resolve this issue with my phone. I have the HTC TYTN II which i recently upgraded to WM 6.1 using the official ROM which i donwloaded from HTC website. Since then i have noticed that sometimes it seems my phone is dialing itself or a call is coming in. The funny part is though every other function is working i wont be able to answer this phone. It will seem to hang. Then after a while i will get the cprog.exe error. To be able to make phone calls i have to soft reset the phone. i have had to hard reset my phone twice already with no solution. Also googling has not been able to provide any answer too. I just sent an email to HTC Technical support now but with experience i doubt if i will get any useful response. So this is my last resort.
It is also pertinent to note here too that intermittently i do get the tmail.exe errors.

Hi,
I am having the same problem after the upgrade..frequently its becoming stoned! requiring restart many time during the day...which was not the case before...anybody has got any solution???
I love my TyTn II but not the 6.1 ..its not stable!

azuka said:
Hi Guys,
I have the HTC TYTN II which i recently upgraded to WM 6.1 using the official ROM which i donwloaded from HTC website. ........ errors.
Click to expand...
Click to collapse
Azuka, who so ever upgraded to 6.1 from HTC experienced the same problem even i myself suffered the same. So your only solution is to downgrade to 6 but before doing that you must HardSPL your phone ...

Two words... bad flash.
Regardless of what you might hear about WM 6.1 being unstable/unusable, it's simple NOT TRUE. Head over to the Kaiser Wiki, read up on flashing HardSPL (really read), and then once you have HardSPL'd your phone, flash a different ROM.
But please do not make the mistake of asking for recommendations on which ROM to use. The ROM that works best for me probably will not work best for you, in terms of programs loaded and cosmetically.

NotATreoFan said:
Two words... bad flash.
Regardless of what you might hear about WM 6.1 being unstable/unusable, it's simple NOT TRUE. Head over to the Kaiser Wiki, read up on flashing HardSPL (really read), and then once you have HardSPL'd your phone, flash a different ROM.
But please do not make the mistake of asking for recommendations on which ROM to use. The ROM that works best for me probably will not work best for you, in terms of programs loaded and cosmetically.
Click to expand...
Click to collapse
Thanks for your reply. Your two words "Bad Flash" got me thinking. How could that be. I thought so too and had to re-download the file from htc website and re-installed.
About HardSPL'd your phone, from reading the wiki i now know what it is. But there is no instruction out there to HardSPL'd. Do i need to get the file and copy unto my phone or what?
thanks.

Head over to the Wiki, and under ROM Upgrading - Tools, I added an entry to HardSPL v3.xx. All the instructions needed are in that thread.

NotATreoFan said:
Head over to the Wiki, and under ROM Upgrading - Tools, I added an entry to HardSPL v3.xx. All the instructions needed are in that thread.
Click to expand...
Click to collapse
Thanks for your help for far. This is an update of where i am today and a few questions i need your help to answer:
I took my phone into the retialer where i bought and who serve as the service center for HTC here in Doha, Qatar. They re-installed the WM 6.1 OS and so far i dont have the issues i was having before. However i do experience momentary screen freezes which eases off after a few second. Right the device information is as follows:
ROM Version: 3.28.405.0 WWE
ROM date: 05/02/08
Radio Version: 1.65.17.56
Protocol Version: 25.83.40.02H
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Thank you once again.

azuka said:
Thanks for your help for far. This is an update of where i am today and a few questions i need your help to answer:
I took my phone into the retialer where i bought and who serve as the service center for HTC here in Doha, Qatar. They re-installed the WM 6.1 OS and so far i dont have the issues i was having before. However i do experience momentary screen freezes which eases off after a few second. Right the device information is as follows:
ROM Version: 3.28.405.0 WWE
ROM date: 05/02/08
Radio Version: 1.65.17.56
Protocol Version: 25.83.40.02H
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Thank you once again.
Click to expand...
Click to collapse
I have the freezing issues too. Two things has helped me reduce the frequency (and improve general responsiveness of the device):
1. I've disabled the HTC task manager application - that helps a lot on responsiveness
2. Each time I soft reset the phone, I manually kill the mstli.exe process - that helps a lot on the freezing issues.
regards,
Spip

Just to share some experiences
So I have the TyTN II and I recently upgraded to the official HTC WM6.1.
I have none of these problems of screen freezing, unstable rom, etc etc etc...
However, I do suffer from occasional program error message and asks me quite a few times to send the report to microsoft.
But this only happens when I load certain third party softwares and then close them down.
I attribute this to compatibility issues with WM6.1...maybe I'm wrong. But that's what I think anyway.

azuka said:
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Click to expand...
Click to collapse
You do not have HardSPL on your phone. You have SPL 3.28, which was flashed to your phone as part of the WM 6.1 upgrade. If you want to try out custom ROMs, you will still need to flash HardSPL 3.xx.
I recommend flashing HardSPL 3.56. It was ripped from an AT&T build, but seems to work great with all flavors of WM 6.1.
As for the freezing, it cannot be eliminated 100%. But with a good cooked ROM and the right HardSPL, you will rarely experience one.

I had this issue and it was just down to previous HardSPL being left at an early version (I think around 1.02) on the device and if you apply this latest HTC stock ROM update you get a bad flash and freezing especially in the threaded SMS app.
Install any HardSPL later than 3.00 then redo the ROM update and it should cure it.

Thanks guys. I just did the HardSPL 3.56 and re-installed the HTC official 6.1 ROM. So let's see how it goes.
Btw, HardSPL-ing is not as difficult as it seems though.
Right now the following is my configuration:
KAIS130
SPL-3.56.Hard
CPLD-8
Device Information is as follows:
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.17.56
Protocol version: 25.83.40.02H
Thanks all.

NotATreoFan said:
You do not have HardSPL on your phone. You have SPL 3.28, which was flashed to your phone as part of the WM 6.1 upgrade. If you want to try out custom ROMs, you will still need to flash HardSPL 3.xx.
I recommend flashing HardSPL 3.56. It was ripped from an AT&T build, but seems to work great with all flavors of WM 6.1.
As for the freezing, it cannot be eliminated 100%. But with a good cooked ROM and the right HardSPL, you will rarely experience one.
Click to expand...
Click to collapse
If I want to downgrade from official wm 6.1 to official wm 6.0 that is in xda, do I need a spl or hardspl ???
By the way, the problem I am having with WM 6.1 is support code 86000107, sync problem that until today don't see a solution

if u need upgrade or downgrade then u r speaking about a need for hardspl
dkiersz said:
If I want to downgrade from official wm 6.1 to official wm 6.0 that is in xda, do I need a spl or hardspl ???
By the way, the problem I am having with WM 6.1 is support code 86000107, sync problem that until today don't see a solution
Click to expand...
Click to collapse

Just a quick update. After HardSPL-ing my phone it worked well for sometime then the tmail.exe error surfaced. I have only had the cprog.exe error - where a call comes in and i can not answer neither can i make another call until i soft reboot - has only happened once or twice. Apart from these the phone has been working well.
Anyway i just got a reply from my earlier mail to HTC and thought i should post if here for people's information. Apparently they are aware of these issues and working on them. Read for yourselves:
New Response From [ Maha Mamer (Qatar Support (Tech)) ]
Thank you for contacting HTC Corporation Middle East Support Dear Mr. Felix First of all we are very sorry for our late reply Please, if your problem still exist with this error message, you can try one of two options. 1- go to Start> Settings> System(tab)> error reporting> and disable the error reporting option. 2- If this did not solve your problem, then you might need to get back to WM6.0 until we finish our update for the new release of WM6.1 with the new modification for our web site. Please do not hesitate to contact us back for any inquires. Please note that you could also contact us by phone on our hot lines. http://www.htc.com/mea-en/CA_Hotline.aspx?region=MEA Sincerely, thank you for choosing HTC Corporation HTC Corporation Middle East Support Team http://www.htc.com/mea-en/default.aspx

Just an observation here:
After reading somewhere on these pages that the erratic behavior of TYTN II could be due to bluetooth adapter i decided to go some days without my Motorola S9 bluetooth ear piece i am yet to experience any of the issues i had before. Could the bluetooth software for WM 6.1 be the issue?

Momentary Freezing - Resolved?
azuka said:
Thanks guys. I just did the HardSPL 3.56 and re-installed the HTC official 6.1 ROM. So let's see how it goes.
Btw, HardSPL-ing is not as difficult as it seems though.
Right now the following is my configuration:
KAIS130
SPL-3.56.Hard
CPLD-8
Device Information is as follows:
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.17.56
Protocol version: 25.83.40.02H
Thanks all.
Click to expand...
Click to collapse
Did you ever resolve your momentary freezing issues? I have a new TYTN II that I upgraded to WM 6.1. I used hardspl 1.0 to do that but after reading numerous posts, I loaded HArdspl 3.28. After installing hardSPL 3.28, the 5 second freezes are less frequent but happen everyday.
I am not sure where to go from here? load another HSPL? Reload '3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English) ' ROM?
As you know these pauses are very annoying.
Tytn II - Kaiser
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H

wa4cbg said:
Did you ever resolve your momentary freezing issues? I have a new TYTN II that I upgraded to WM 6.1. I used hardspl 1.0 to do that but after reading numerous posts, I loaded HArdspl 3.28. After installing hardSPL 3.28, the 5 second freezes are less frequent but happen everyday.
I am not sure where to go from here? load another HSPL? Reload '3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English) ' ROM?
As you know these pauses are very annoying.
Tytn II - Kaiser
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
Click to expand...
Click to collapse
Actually the freezing is barely existent. Even the other issues seemed to have disappeared since i stopped using my bluetooth.

How to Stop Momemtary Freezing
azuka said:
Actually the freezing is barely existent. Even the other issues seemed to have disappeared since i stopped using my bluetooth.
Click to expand...
Click to collapse
I am looking for a solution. Not using Blue tooth to use a device that costs over 600.00 just doesn't make sense to me.
Is there a ROM hardSPL combination that will give me freeze-free performance or is this an HTC problem that is not solvable. I just can't believe that every Kaiser user that has upgraded to wm 6.1 has the same issue that I have with momentary freezes that last up to 5 seconds.
Is the solution another ROM, another Hspl, another phone? Who can help me resolve this issue? Is there a better place to post this?
Thank you

Freezes and locks.
Prior to my upgrading my AT&T Tilt to WM6.1 which I did today. I was experiancing LONG freezes, listening to music or just waiting for menus. I could not determine any specific software that was the cause. I tend to install a lot. Did a hard reset, didn't install the AT&T bloat, reinstalled my primary apps MS Voice Command 1.6 (a Must). Still same issues... Occationally could NOT answer calls. Hit the green button, or the answer option on screen. the onscreen 'answer' would flash, but I could not use the phone until a soft reset. LONG process when you are waiting for a call back.
AT&T sent me a new phone which I got and installed the NEW wm 6.1 before anything. Worked pretty well, but I had not made any calls or recieved any all day. I did listen to several hours of music on my Motorola S9 headset and made sure Audible Player would work. Two apps I use daily.
All seems well, except NOW I get the cprog.exe error. I decided to test my phone with a simple incoming call. Before I ended it, it went dead. Not sure what the HardSPL is yet. Will look into that. Just thought I'd let others know that the lag, AT&T seemed to think was a hardware issue so they replaced my Tilt.
Software installed; MS Voice Command 1.6, Live Search, Audible Player, TCPMP, FlashBundle, GPSToday. Pretty much it besides the AT&T bloat that came with the ROM. Good luck

No network after new ROM :(

I just flashed my Diamond with the: RUU_Diamond_HTC_NOR_2.03.409.1_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I'm an norwegian that's in the US studying, so they only gave me the norwegian version. Anyways, everything worked fine until flash, but now my phone refuses to register on the network (AT&T)!
Took the sim-card back to the at&t nokia phone, worked the first time...
I really wants to use my Diamond instead of the crappy nokia, but it would be a shame to downgrade to 1.93 (which worked just fine...).
Someone, please have a solution for me?

simply install a new radio....try 1.00.25.07 that seems to be the only quadband radio..
(you have to flash an hspl before)

It's stuck on 0% and won't continue... Tried several roms :-/

no service?????
is there a soution to this no network problem
THERE IS A CROSS IN THE RECEPTION BAR AND WHEN YOU DIAL OUT IT SAYS "OPERATION FAILED"
any replies appreciated

Quite bad if the official RUU more or less bricks the device, at least turns into just a little computer

It screwed up my Diamond aswell The gprs is completely dead, been up all night trying to fix it, several hard resets etc, nothing helps... if it was a cooked rom I could tolerate it but official roms screwing up our phones this easily pisses me off.

Mine worked again, with the old 1.93 rom!!
What the hell did they do to 2.03? I suppose the radio rom is different at least... But I couldn't change to the old radio when I had 2.03, tried using the HardSpl...
Is it possible to flash _once_ with everything from 2.03, but the 1.00.25.05 radio (which is the one from 1.93)? Doing it sequentually doesn't work.

So what I did, as the final solution:
Flash with stock 2.03 rom
HardSPL
Flash with 1.05.25 radio
Works perfect!

Hmm i did the other way round with my o2 XDA Diamond (1.93 Stock)
1. Hard SPL
2. New Radio Rom (1.09.25.23)
3. 2.03 official Ger HTC Rom (without vendor lock)
works great as well

I've seen this issue a couple of times too. With 1.93 as well as with 2.03. Did not figure out what was the cause but never had a chance to bring the device back to life with some uninstallation or radio flash. I always went back to the SPB Backup from the night before it stopped working propperly.

Can't make phone call or recive it after upgrade ROM

Hello to all,
I have big problem with my BA GSM... I have done a lot of research but I can't solve my problem...
I have upgraded my BA (SPV M2000 ORANGE UK) from win 2003 SE to Win 6.1, Win 6.5 Win 5... But in all ROM versions I don't have a possibility to make or receive call... Phone is on automatic search for network and always founds my home network, but when I'm supposed to receive a call, network is going down (just loose it). When I want to make call same thing happens. When I switch to manual searching for network I get this message: "Cannot read settings from the network. Try viewing settings later, or disconnect data connection and try again"
I have tried to change radio ROM to every version you have on forum (right now I am on last 1.15), but still same problem.
When I was on the win 2003 SE, I have to use unlocker to make GSM working and that is working just fine... But when I upgrade to any other version of ROM or radio ROM, GSM doesn't function like it should...
Device information for my BA:
Operatior Version: wm 6.1 ppc Pho...
ROM version: Black Skin HT4...
ROM date: 08/08/08
Radio version: 1.15.00
Protocol version: 1337.45
ExtROM version: 1337.45
ExtROM version: Black Kernel
Model no: PH20B
Many thanks in front for any idea

Try going back to the original ROM or reflashing you current one. I had a similar problem where my sim was not inserted completly and would keep dropping in and out.

Thanks for respond I already tried to change sim card, but same thing happened... I don't know where I can found the original ROM for my SPV M2000 orange UK to try to fix my GSM... Does anybody now where I can found the original ROM for my baby ?

Here are 2 places for the original ROMs, also with original radio ROM.
http://firmware.atspace.com/Blueangel.html
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades

Thank you for help, I restored phone to shipped ROM RUU_v2.5_OrangeUK_v5.40.1.179.ship and everything works fine... I have don't have any problems..
Is that mean that now I can't upgrade my windows to any other windows for my phone, or I should try again with some differed ROM...do you have any idea what is best ROM for my BA ?
Working Device information:
Operator version: 5.40.1.179
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.06.02
Protocol version: 1337.38
ExtROM version: 1.40.179 WWE

You should be able to upgrade to other ROMs, I am not to sure why you had the problem with so many different ROMs. I use xplode's R7.1 WM6.5 ROM, but there are other to use. swampy395 also has a pretty good 6.5 ROM.
http://forum.xda-developers.com/showthread.php?t=482997

also make sure to remove the sd card AND the sim card from the device before upgrading and have the battery charged 100%, that should do the trick

please delete

Unfortunately its impossible to change ROM...I tried every Xplode ROM from ver 5 to 6.5, and also I tried swampy395 ROM... Always the same problem remains - GSM drop after I try to call or receive phone call, and after that, no SERVICE at all... I switched to every radio ROM from 1.00.00 - 1.15
I think I'm doing everything ok:
1) removed SIM card & memory card and confirmed that battery is 100% full
2) Entered bootloader and start MaUpgradeUt_noID
3) After upgrade is finished, I have done hard reset and entered in boot menu then do NO YES YES
4) After system is normally booted, I inserted SIM card, switched phone ON and reset it after that, because radio ROM need to boot also
And that's the way I have done upgrade

wow, that's a tough one.
question: i saw, the shipped rom you used, was orange uk, is your phone actually a british orange branded one, or was that just a test shipped rom?
have you ever, in wm2003 or wm6 tried running xda unlock? http://forum.xda-developers.com/showthread.php?t=240784 to get a sim unlock or just for fun?
and let me just throw one more thing in the discussion, the newer roms seem to support newer sim cards that wouldn't have worked with wm2003, maybe that is true the other way around as well, maybe your sim card is too old to work in "your new phone". happened to me once with another phone. contacted my operator and they sent me a new sim card, with the same number. a copy of my old card, just on the new ones.
have you ever tried it with another sim card?
wow, that was all i can come up with, your problem is really complicated and you already tried so much yourself, there is hardly anything to suggest anymore

Chef Tony my friend,
I have to unlock my phone when I receive it from UK (ORANGE UK is phone for sure) I do unlock with xdadev_all_unlock-v1.6_138.exe and its successful. I do unlock again for many times with new ROMs but nothing happened. I also try 4 different SIM card and there is no change... I will contact my network operator to see what they think...
Many thanks for helping me

Hi there. Have you solved this problem?
Best regards

Hi i have the same problem i changed the rom and the radio but i can get signal
NO SERVICe thats all that it says please help
the problem started from no where i never tryed to change anything in my phone before

Hi i have the same problem i changed the rom and the radio but i can get signal
NO SERVICe thats all that it says please help
the problem started from no where i never tryed to change anything in my phone before

And after i upgrade the rom my youtube player doenst work!

please make sure, you tested all the things suggested before. plus after posting three posts in a row, i would have expected a little more information, like rom version, country, carrier, radio version and so on. there is nothing new to say, if we have to guess everything.
about youtube, well, that depends on what rom you are using, you might even be able to just go on the site in your browser, of if you want a faster and more reliable solution, try -=this=-

Im still on wm2003... there is no solution for me

Unable to Load Bootloader

I have tried hitting record + power + reset and still no dice.
I did this last Jan to my BA with few problems, put in the wm6.1
Wanting to install this one WM6.5
I also installed the Wizard Service Tool and it doesnt seem to work. It will give me info but the hard reset and other rom features don't want to work.
is there a workaround for gettin to the bootloader? Or should I take this all as a sign not to brik my phone? ;D
thanks,
chela

hi , i'm new on the forum...i think i've the same problem, on my PDA2K..
I try to install a new rom from wm2003se, using a file called "preparazione BA"( i think i've unlocked the extrom), then i normally setup with the MaUpgradeUt_noID.exe..But now, when the upgrading is completed to wm6, i'm not able to load the bootoption..i can see 4 colour bands (green blue red white) but no option to boot. The rec+photo+reset seem not to work.
Could anyone help me\us??
Regards at all
Davide

after 2 hours..here are some news: my pda2k display became with the 4 color but there was writen something about R none, G none and (version onf the rom i tryed to install) then pressing rec+cam i saw for little fraction of second the menu enable kitl ,clean registry, etc.. and then suddenly the wm6 starts. After installing the OS ask me to reset..Well, it return to the same 4 color, and the only word i see is R1.11.00
I'm getting crazy...
Please big chef tony help me!
i don't know what to do now...i'm little down
Davide

...lol maybe because I dont do this often enough, but this case was solved with a little bit of RTFM!
I didnt realize I was pressing the wrong fsking button! derr!
Here is Chef Tony's post...should carve it into my desk!
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners

Hello, my ppc always dispays the four band with R1.11.00 written..After a lot of reset(often unplugging battery) and photo+rec, i was rarely able to display the boot option, but here is strange what is written(attached photo n°2): R None, G None, D 1.21 Michy.. Then pushing "mail" the OS start installing wm6, then, it ask me to boot so i would be able executing extrom to install cab file.It resets and then it appears the famous four band with R1.11.00
Any idea??
I've finished mine....Aww!!
Regards
Davide
P.s. think it's important: my bootloader is v 2.08

i've solved my problem..reading on other forums, they suggest to install a rom WM5, where there was radio upgrade too..After i was able to install WM6.1 ! Now..i have to wait..and crossing my fingers!
Thank you all, if anybody has question ask me, i'll happy to help you
Bye
Davide

Davidenji said:
Hello, my ppc always dispays the four band with R1.11.00 written..After a lot of reset(often unplugging battery) and photo+rec, i was rarely able to display the boot option, but here is strange what is written(attached photo n°2): R None, G None, D 1.21 Michy.. Then pushing "mail" the OS start installing wm6, then, it ask me to boot so i would be able executing extrom to install cab file.It resets and then it appears the famous four band with R1.11.00
Any idea??
I've finished mine....Aww!!
Regards
Davide
P.s. think it's important: my bootloader is v 2.08
Click to expand...
Click to collapse
Nothing strange about what is in photo #2! That is the debugger screen.
Looks like you got it rolled back to the original ROM but if you decide to put the latest stable ROM 6.5 on there you're going to have to follow the Chef's directions in the above supplied link.
Good luck,
Chela

glad you found it out, you are right, there was something wrong with the radio, which is why in screenshot #1 there is only the radio listed and i think that's also why in #4 the comm icons are red, i've never seen that before, but could also be a custom skin in that rom.
brujeria is right, there is nothing wrong with the 2nd and 3rd screenshot, except for the 2nd one only showing the rom and no radio or protocol, meaning that the device was probably resetted by pulling out the battery and not pushing the reset pin with the stylus, unless that was also a radio issue.
unless you already started customizing your device you should probably think about hard resetting it once again and trying if that works, or even re-flash the rom, without flashing the radio, that way you'd know for sure, if from now on you'll always have to flash a "baked rom" (usually a term for a cooked rom, together with radio and extrom, a full flash, in this case i mean rom and radio rom, since the extrom is not really flashed anymore).
with best regards,
Chef_Tony

i've already customized...a little! Now, everytime i soft reset i read this: R 1.15.00 , G 1337.45 , D 1.21 michy.
I've no problem at moment..but i hope i won't never hard reset!
This Rom (WM6.1 included only Rom upgrade) it's nice, but i'm interested about WM6.5..anyway i think to keep this one untill a problem will come out
P.s. Like you say, now the antenna isn't red anymore..it's bright green
Thank you a lot for the support guys!