Do someone know how to put two mobile numbers in one contact.
It is very important, because it is very complicated to send SMS on the mobile number if it is stored under another type of number.
Some of my friend have two numbers and also if someone is writing me an SMS from a number that is not stored under mobile and I want answer, you can't just tap for replay, because the Diamond will use the default mobile number of the contact, not the from from which the SMS was send... it is really incredible. I realised it after some friends didn't recieved my SMS... also because you cannot check to which number you send it... there is just a name!!!
Do someone have a solution?!?!?
It is really annoying for me!!
Thnx!!
Urosh said:
Do someone know how to put two mobile numbers in one contact.
It is very important, because it is very complicated to send SMS on the mobile number if it is stored under another type of number.
Some of my friend have two numbers and also if someone is writing me an SMS from a number that is not stored under mobile and I want answer, you can't just tap for replay, because the Diamond will use the default mobile number of the contact, not the from from which the SMS was send... it is really incredible. I realised it after some friends didn't recieved my SMS... also because you cannot check to which number you send it... there is just a name!!!
Do someone have a solution?!?!?
It is really annoying for me!!
Thnx!!
Click to expand...
Click to collapse
You should be able to solve it via editing the contact either on the PC with which you sync or directly on your device, going to contacts and editing the contact. Just enter the second number in another field, like home, work, main, primary, etc. The label does not really matter.
tnyynt said:
The label does not really matter.
Click to expand...
Click to collapse
As the OP states the label absolutely does matter. For example, a telephone number in the 'Work' field will never be offered when typing a name into the To: field of an SMS message.
Mathew
MJNewton said:
As the OP states the label absolutely does matter. For example, a telephone number in the 'Work' field will never be offered when typing a name into the To: field of an SMS message.
Mathew
Click to expand...
Click to collapse
Correct, for SMS only Mobile will be offered as alternative but as for Caller ID it does not matter.
Not sure if it would help you or even work for your problem, but in Outlook there is a phone type of "car" that you could use. Like I said, not sure if that would help with the SMS issue, but it might.
MJNewton understood my problem...
My problem is to send an SMS to a number which is not under the label mobile.
Also the car label doesn't work. It offers you only the mobile number for sending SMS.
It is really very stupid not to add also a mobile2 label and to offer both numbers!
Would someone invent something for this?!? Do only we in Slovenia have sometimes two mobile numbers?!?!
Thnx!!
U.
Urosh said:
MJNewton understood my problem...
My problem is to send an SMS to a number which is not under the label mobile.
Also the car label doesn't work. It offers you only the mobile number for sending SMS.
It is really very stupid not to add also a mobile2 label and to offer both numbers!
Would someone invent something for this?!? Do only we in Slovenia have sometimes two mobile numbers?!?!
Thnx!!
U.
Click to expand...
Click to collapse
Same here, I have friends studying abroad, with one mobile phone in each country... Solved it using the "work" section, but it's not that good for the SMS... Perhaps if we find the template somewhere it could be changed ?
I would think the logical solution (workaround) would be to have two different contacts in your contact list.
I have this issue aswell.
What yoiu could try is use an app like Icontact or pocketcm.
I beleive you can pick the number were you want to sms to.
have not try'd it my self
i dont have this problem?
if i goto new text, then add contact the contacts list appears, then when i click the contact i have to choose which number i want (mobile, work, mobile2, home ect)
which method are you using to add contacts to the SMS?
rumpleforeskin said:
i dont have this problem?
if i goto new text, then add contact the contacts list appears, then when i click the contact i have to choose which number i want (mobile, work, mobile2, home ect)
which method are you using to add contacts to the SMS?
Click to expand...
Click to collapse
The problem is if you go to your contacts, select one and then pick write sms.
you wont get an option.
or when you reply to an sms (al though i do think then when i reply it does sent it to the number you are replying to.
but it is annoying that you cant see which number it was)
When you use the SMS application and you press "To:" it will show your contacts list and when chosing a name you'll be presented with all the numbers you have for that contact wether mobile, home or work so I don't really see the problem.
Garcia
...possible.....
I don't have too many friends walking around with two mobiles consistently on their person so I don't really considerthis an issue
but if I did (like for differnet countries) and I wanted this to work I would make an exact copy of the original Contact amd slightly change the name to represent the second mobile i.e.
Fred1 Smith xxxxxx
Fred2 Smith yyyyyy
....suppose that would work....
Two mobiles in one contact.
You can't do that on the phone although outlook could do it!
Do as I did in the past.
You have two numbers for John Smith?
contact1: JohnSmith1
contact2: JohnSmith2
TWO MOBILES!!
How far out can you fall with the same name?
I actually had each number on different name because I wanted to know straight way who phoned me.
So I had like DaveMob, DaveHm, DaveFax, etc.
Hi, i've receipt an sms from a contact with more than one telephone number. Is it possible to see the number of the sender? i want to know what number has been used from the same contact to send me th sms.
Thanks
This issue has only been happening recently, but I don't know what to make of it. All of my contacts are stored as 10-digit phone numbers on my phone (area code+7-digit phone number). I don't have any SIM contacts or Google contacts. For some reason, while I can text everyone just fine using the stored numbers, *sometimes* replies come from completely malformed numbers. For example, if I send a text to 123-123-1234, I'll get a reply from 123-312-31234. All my replies will come from the number with the random extra digit mixed in, but I can only send messages to the original 10-digit number for them to actually be sent. This has never happened to me with calls so far, just texts. What could be causing this?
*bump*tenchars
Coming from TW and AOSP-Based ROMs on phones past I've never once encountered this issue. The short of it is as follows: some numbers in my inbox or call log wont link to their entries in my address book because the full number format doesn't match or something. It's a bit annoying because I'll send a message to someone using their 7 digit number, and when the message comes back it starts a separate thread with their contact entry as the number. Again, this never happened in other roms as 7 digit numbers could identify the contact if it was saved under either the 10 digit or the +11 digit number. Is there any possible way to change that behavior or should I just learn to use my address book to send messages? Thanks in advance
I'm trying to find a way to show business contacts' names when they call me from a range of numbers. Due to all of the spam calls I get, I don't answer the phone if I don't recognize the number/name.
For example, my doctor's office main number is xxx-yyy-0500. When they call me, their number has the same prefix and exchange, but the last numbers can be 0490-0510. I'd like to use wildcards to recognize and show the doctor's name for any and all of those numbers.
Has anyone done this before and can share their profile/task?
Let me try again. I'm trying to find a way to match the first 6 or more digits of an incoming call to an existing contact to account for the multiple numbers they may call me from. Maybe reading the phone number into an array to compare. Something like this for example?
Phone Ringing
If C:ANY or C:ANY(1-6)
Say Incoming call from %CNAME
End If