Hey,
yesterday I´ve dropped my Diamond accidentally and now my Display is broken.
What can I do now?
Is it possible to buy an another Case/Display and install it by myself or do I have to bring it to my appointed dealer?
Ps: I`m pissed off! ;-)
No ideas?
Is it not possible to buy any case or an another Display?
try it
http://cnn.cn/shop/touch-diamond-digitizer-p-2128.html
Thx.
Do you know if it is possible do install it as layman?
And it would be nice if I could order it in Germany ;-)
Any other Sites?
Related
umm sry guys if i am screaming and with possible OT but its kinda urgent for me..
kk heres the story, i live in croatia in Europe.. i got my ppc cingular 8125 from ebay like 9 months ago and it was working fine... than one month ago the touchsreen would disalign, and than it went totally off... I sent it to the service here but they were unable to locate the proper error... they told they r quite sure the display controller went dead...
so, I am willing to send it in USA to a decent service... i got a friend in florida which could manage this, so I ask u plz if u know any decent service which could be able to fix this problem... and for cheapest price if possible, cos guys here told me a new screen would cost around 200$ which is too much (i think... since for few more hundres dollars i can get a new one)... so plz, can u suggest me any good service at florida or near there?
thx guys
hf&gl
ps- will there be any problem, since i modded ppc with that antenna aluminium foil + the speaker gum (the one which is stick on them) is missing? I had no guarantee when i got it from ebay, of course..
im not sure of the price but im pretty sure there's instructions somewhere explaining how to open up the wizard and replace the screen. It sounds like all you'll need is a new touchscreen, which i thought was under $100. That is of course if you're willing to do it yourself.
Im sorry i cant help, but im going to bump this just so someone who does know can help you.
yea, i thought the same... on ebay there r touchscreens for cpl of bucks... but what if the problem isnt in touchscreen? could it be maybe that the whole LCD+touchscreen is dead? I have to say i can't see any bad pixel on lcd display, he is workign fine... but what if...
any suggestions? could it really be that just the touchscreen is dead?
uwashock said:
umm sry guys if i am screaming and with possible OT but its kinda urgent for me..
kk heres the story, i live in croatia in Europe.. i got my ppc cingular 8125 from ebay like 9 months ago and it was working fine... than one month ago the touchsreen would disalign, and than it went totally off... I sent it to the service here but they were unable to locate the proper error... they told they r quite sure the display controller went dead...
so, I am willing to send it in USA to a decent service... i got a friend in florida which could manage this, so I ask u plz if u know any decent service which could be able to fix this problem... and for cheapest price if possible, cos guys here told me a new screen would cost around 200$ which is too much (i think... since for few more hundres dollars i can get a new one)... so plz, can u suggest me any good service at florida or near there?
thx guys
hf&gl
ps- will there be any problem, since i modded ppc with that antenna aluminium foil + the speaker gum (the one which is stick on them) is missing? I had no guarantee when i got it from ebay, of course..
Click to expand...
Click to collapse
My screen just start to disalign a couple a weeks ago...
I just hope this does not mean that i will loose it...
any luck uwashock?
duh? luck what? no, i still dont know what to do... i dont want to **** up ppc by myself when changing screen... i dont know wot to do...
crap..
repair shops
if ur in florida ( idk what part), try looking for a cingular repair shop, i know t-mobile has one for its phones and things like that, i think its somewhere in clearwater, i always see it advertised on those beepers and phones ads.
here are some links that I found
http://www.cellrepair.us/services_cell_phone _repair.html
http://www.cell-phone-repair.com/
good luck, i might be having the same issuse sood
and, of course, google is your friend
I killed my Kaiser by flashing a Touch Diamond ROM to it.
Sent it to repair service and they say the Mainboard needs to be replaced,but the price for repair is ultragious .
I realy need the device,it was a big help in my confused life style.
Can anyone tell me how can i fix it myself. Or where i can buy a mainboard. Or where can i send the device to repair for a cheaper service?
Sorry i have started a new thread,but i think this is a serious matter,cause HTC TyTN II is not a toy"I know i done to it the same as to a toy" and its expensive. Please help.
Thanks in advance for all your help guys.
(Solved)
why would you flash a touch diamond rom when your device is a kaiser?
CraZyLiLbOy said:
why would you flash a touch diamond rom when your device is a kaiser?
Click to expand...
Click to collapse
Duhhhhh.....'cause he wanted to kill his device!
sherpa said:
Duhhhhh.....'cause he wanted to kill his device!
Click to expand...
Click to collapse
lol....................
Blueangel69 said:
I killed my Kaiser by flashing a Touch Diamond ROM to it.
Sent it to repair service and they say the Mainboard needs to be replaced,but the price for repair is ultragious .
I realy need the device,it was a big help in my confused life style.
Can anyone tell me how can i fix it myself. Or where i can buy a mainboard. Or where can i send the device to repair for a cheaper service?
Sorry i have started a new thread,but i think this is a serious matter,cause HTC TyTN II is not a toy"I know i done to it the same as to a toy" and its expensive. Please help.
Thanks in advance for all your help guys.
Click to expand...
Click to collapse
Touch diamond isn't all that great. It's lyk a Nokia platform on a PDA, why'd u flash it to a kaiser anyway ?!
About the raw materials, you can easily get the main board (for cheep) through any cellphone spareparts shop online through google . As far as repair is concerned, its as easy as performing a hardware upgrade for your pc; un-plug--> plug. If you're still scared, you can google for a stp by stp instructions.
Blueangel69 said:
I killed my Kaiser by flashing a Touch Diamond ROM to it.
Sent it to repair service and they say the Mainboard needs to be replaced,but the price for repair is ultragious .
I realy need the device,it was a big help in my confused life style.
Can anyone tell me how can i fix it myself. Or where i can buy a mainboard. Or where can i send the device to repair for a cheaper service?
Sorry i have started a new thread,but i think this is a serious matter,cause HTC TyTN II is not a toy"I know i done to it the same as to a toy" and its expensive. Please help.
Thanks in advance for all your help guys.
Click to expand...
Click to collapse
your not the only one with a confused life style
Not dead,just sleeping
_Alex_ said:
As for where to purchase parts, I'd normally tell you to go here: http://www.pocketpctechs.com/main~unit~HTC_TyTN_II-972~area~home.htm but they don't have motherboards.
Your best bet might be to buy something from eBay with a cracked screen, because the motherboard, cpu & chipset is usually the most expensive part, and if you fry that it's usually easier to just buy new...
Hope this helps!
Click to expand...
Click to collapse
Thankx Alex.
I knew that wise words and advice would come out of the inner you.
I went to Mike Channon Home Page and left a message there,im still waiting for a reply.
I will go get the Device from the repair shop tomorrow. Ididnt accepted the price.
I will try and fix it myself,as i have the hability to fix Electronic things as PCs,Laptops,Mobiles etc,thank GOD.
Im low on economic status,but i will try Ebay my friend.
First Kitchen i used was the one with all your OEM Packages. So i love your work.
Hope you keep up in the good path of life .
For some of the others, should ignore any inconscient reply.
Of course i didn wanted to kill my Device. I just cooked HTC Touch Diamond ROM in a Kaiser Kitchen,added some Apps from the ROM i cooked based on C. Stu ROM to make it more colorfull,more alive to our eyes. But it went wrong,and if Man doesnt commited mistakes,so there wouldnt be positive results. Test we need. Mistakes have to occur in order to get better things.
People in Ethiopia have a more confused life than me. Im not an egocentric person, but cool .
I always learned things the hard way .
While I changed my screen I broke the keyboard connector on the mainboard. The brown plastic closing mechanism broke to parts. Any clue where I could buy a new one and if it is possible to change it (solder?)?
CraZyLiLbOy said:
why would you flash a touch diamond rom when your device is a kaiser?
Click to expand...
Click to collapse
he cooked the rom first ... and i'm guessing something didn't go right. OFCOURSE he just didn't straight flash a diamond rom .. he's a cook so i think he knows better than that.
The only thing I can say you:
Great Avatar......
There is always a Solution
raccna said:
While I changed my screen I broke the keyboard connector on the mainboard. The brown plastic closing mechanism broke to parts. Any clue where I could buy a new one and if it is possible to change it (solder?)?
Click to expand...
Click to collapse
Im sorry for what append to you device. It doesnt make us feel good.
What did realy append ?
What part do you need ?
I have the solution for that. If you need a new Mainboard i can get it for you.
I dont make crazy prices. Probably a new device for the price of a Mainboard,thats what ive done,but im searching for a Mainboard supplier thought .
If you want to know more PM me.
Hi Thesire
thesire said:
he cooked the rom first ... and i'm guessing something didn't go right. OFCOURSE he just didn't straight flash a diamond rom .. he's a cook so i think he knows better than that.
Click to expand...
Click to collapse
Nope,i didnt straight flashed a Diamond Rom.
I knew i had to cook it. But forgot that i had to Port XIP and probably SYS from a Kaiser ROM to the Diamond one, or the reverse.
Im still on the learning process. But as you must know,Time is the Master.
And learning and take actions till they come correct its a bit time consuming. And i dont have much time these days.
I learned the hard way. I believe thats one thing that will never appen again .
Im waiting for my new Kaiser to arrive. Couldnt find a Mainboard supplier yet.
But i can get Kaisers for less then the price they asked me in the repair shop.
I have a quick question, if I am about to buy a Kaiser in Spanish all that I have to do is flash the phone with an English ROM and I'll have a regular Kaiser correct? Please help quickly because I don't have much time to buy this phone.
carltmac said:
I have a quick question, if I am about to buy a Kaiser in Spanish all that I have to do is flash the phone with an English ROM and I'll have a regular Kaiser correct? Please help quickly because I don't have much time to buy this phone.
Click to expand...
Click to collapse
yes .......................
I also have one more question, the phone that I am looking to purchase has a Z key missing, is there any way (and if so how or where and how much) to get a new Z key for the phone?
Thank you so much for all of the help.
carltmac said:
I also have one more question, the phone that I am looking to purchase has a Z key missing, is there any way (and if so how or where and how much) to get a new Z key for the phone?
Thank you so much for all of the help.
Click to expand...
Click to collapse
ebay is your friend my friend ... search for replacement keypads for kaiser. And secondly why don't you buy from someone here??? alot of kaiser users are selling their kaisers as they are switching to the fuze or someother new phone for htc.
hell I would love to buy from someone here but the thing is people are looking for a lot more here then on EBay right? Like I mean I am looking at them on Ebay for like $200? If some one can offer a deal around there I would much rather buy from here.
parts replacement
It seems to me the two best sites I have found for Kaiser parts, are CNN.CN and cellulardr - both sell the keypad
hi my milestone touch screen not working few weeks before its like sum ghost touch then now its not working i take it 2 the work shop and the said me its touch sensor is not working and we dnt have a touch sensor my location is pakistan bahawalpur plzzz anyone can help me em looking and em sory about my english.....
same here )
you need to replace the digitizer but in this moment i don't know from where to buy one, i have o do some research, i know the answer is in this forum cause i read about it.
Buy one on ebay, there are many sellers selling those replacement parts.
Or buy an used Droid/Milestone, replace yours.
I have one functional digitizer (a used Droid), but there are scratches on it. Anyone interested?
in witch country?
markv99 said:
in witch country?
Click to expand...
Click to collapse
I'll be in USA till this Christmas.
If anyone want it, please be quick.
I'm planning to sell this digitizer + rest of the phone (motherboard not functional, sorry).
Hi guys,
I would like to buy new screen since mine is totally broken. Tried online couldnt find any trusted used or new one.
Would anyone leed us to good place ?
Br
where you from?