Related
good day, what was the registry fix implemented by SMS ALert Fix for WM 5.0?
maybe just not the same registry entries? can somebody pls share which registry entries were changed by TOE's SMS Alert Fix for WM 2005?
XDA 2 wont turn on with incoming messages, the phone will notify you with a cound but it remains OFF, can somebody fix this.
i'm using C_Shekhar ROM WM 6, AKU 7.0, Version C.
thanks.
Hello,
you have to install this CAB (no Registry Entries but a new DLL).
It works great for me.
i think its not work on WM6 ROM :/
eshus said:
i think its not work on WM6 ROM :/
Click to expand...
Click to collapse
yeah, it doesn't work on WM6...
i tried resorting to using PhoneAlarm, which, at times work.. but not all the time..
anybody got bright ideas on this SMS alert issue while on suspend mode?
yup, the fix doesnt work, and phonealarm only wakes up the device for a short while only. im keeping this thread alive hoping someone could give a solution.
dkamin said:
Hello,
you have to install this CAB (no Registry Entries but a new DLL).
It works great for me.
Click to expand...
Click to collapse
Thank U very much buddy !
Guys I need volunteer to try, I make little modification of the cab file above, install in your device please give feed back. It won't harm your your device
i test it just 1 day, i think its working good, but i need more time for testing And what is this "little modification" ?
eshus said:
i test it just 1 day, i think its working good, but i need more time for testing And what is this "little modification" ?
Click to expand...
Click to collapse
Let's see the final result
SMS
Is working, in my Qtek 2020 !!!
SMS Fix
It works great! thanks for the little modification
selangkahlagi said:
Guys I need volunteer to try, I make little modification of the cab file above, install in your device please give feed back. It won't harm your your device
Click to expand...
Click to collapse
does this really work?
if i have tmail.exe run, i think its working good!
But i dont know, if it´s working when i close tmail.exe
just waiting for feed back guys
selangkahlagi said:
just waiting for feed back guys
Click to expand...
Click to collapse
Worked great until I have to hard reset my device.
Don't think this fix is the cause of the freeze but it resolved the initial issue.
this is working great.. it works on my himalaya with 7.0c version of master c_shekhar rom.. great job! now all the bugs are fixed!
sakurasyaoran said:
this is working great.. it works on my himalaya with 7.0c version of master c_shekhar rom.. great job! now all the bugs are fixed!
Click to expand...
Click to collapse
can't wait to try it! last thing to fix is the fast battery drain issue...
after that, WM6 is completely ported to the mighty HIMA!
woohooo!!
sakurasyaoran said:
this is working great.. it works on my himalaya with 7.0c version of master c_shekhar rom.. great job! now all the bugs are fixed!
Click to expand...
Click to collapse
---
How about the camera problem in video recording,is it fixed?And the dial-pad orientation in landscape mode?
ill be working on the vid problem as soon as i get my HIMA bak
from the wrkshop
dnardz said:
---
How about the camera problem in video recording,is it fixed?And the dial-pad orientation in landscape mode?
Click to expand...
Click to collapse
what's the bugs? i dont see anymore problem on my himalaya..
Saw the audio enhancement done by SRS WOW on my cousin's HTC Touch.. Its fabulous.. Can we use it on Diamond?? Which version do i use on Diamond??
Search on this forum. Mine copy off srs wow was a complete disaster, resulting in a hard reset. Some others said it works but not so good.
Hey guys, I installed SRS wow on my girlfriends diamond, but it wouldnt work, and I had to hard reset the phone.
Srs Wow Hd
install srs_wow on main memory
and copy wowhd_amr_panel.cpl in windows
and do a softreset.
it works perfect on mine
Rom 1,93,404,1 nld
Radio 1,00,25,07
whiskeybro said:
install srs_wow on main memory
and copy wowhd_amr_panel.cpl in windows
and do a softreset.
it works perfect on mine
Rom 1,93,404,1 nld
Radio 1,00,25,07
Click to expand...
Click to collapse
Thanks, worked flawlessly here too. And I just stumbled into this thread to read
Installed it, but doesnt seem to make any diffrence to the sound
whiskeybro said:
install srs_wow on main memory
and copy wowhd_amr_panel.cpl in windows
and do a softreset.
it works perfect on mine
Rom 1,93,404,1 nld
Radio 1,00,25,07
Click to expand...
Click to collapse
Fantastic, Its actually working perfectly, no volume problems and the sound is crstal clear, I love it!
Jin187 said:
Fantastic, Its actually working perfectly, no volume problems and the sound is crstal clear, I love it!
Click to expand...
Click to collapse
\
um....for me it's working but when it's working I find my volume controls disabled, so the volume level is constant. And the condition recovers when I uninstall SDS WOW.
Anybody have the same experience?
hyann said:
\
um....for me it's working but when it's working I find my volume controls disabled, so the volume level is constant. And the condition recovers when I uninstall SDS WOW.
Anybody have the same experience?
Click to expand...
Click to collapse
No problems here. Which volume are you talking abt anyway? System volume, player volume?
Anyways, I've packaged up a cab with the cpl file built in, so you need not care abt the extra step of manually copying it over. I believe this cpl is for VGA.. or compatible with Diamond? - Didn't bother to try the original one.
I also added my SRS recommended settings You need not follow those though.
Working on SwiftBL5.6.
MasK said:
No problems here. Which volume are you talking abt anyway? System volume, player volume?
Anyways, I've packaged up a cab with the cpl file built in, so you need not care abt the extra step of manually copying it over. I believe this cpl is for VGA.. or compatible with Diamond? - Didn't bother to try the original one.
I also added my SRS recommended settings You need not follow those though.
Working on SwiftBL5.6.
Click to expand...
Click to collapse
Does it really make sound any better? or no difference at all?
s_kates81 said:
Does it really make sound any better? or no difference at all?
Click to expand...
Click to collapse
Definitely makes a difference.
It's for 3D effects and extra bass. I use it together with my pocketMusic+bass and it sounds awesome.
Bottomline is, it's subjective. No harm trying it out.
Allright. Can it be used with bluetooth stereo or only wired headset?
Hmm I get "There is no WOW HD driver loaded. The control panel will now exit."
I installed the cab created by MasK.
Any ideas please?
when the volume buttons not working flash in Radio version 100.25.07
deeman said:
Installed it, but doesnt seem to make any diffrence to the sound
Click to expand...
Click to collapse
when the volume buttons not working and/if no sound difference flash in Radio version 100.25.07
it seems that its not working with all Radio's
Trem said:
Hmm I get "There is no WOW HD driver loaded. The control panel will now exit."
I installed the cab created by MasK.
Any ideas please?
Click to expand...
Click to collapse
download my wowhd panel.cpl.zip
unpack and copy to windows then softreset
whiskeybro said:
download my wowhd panel.cpl.zip
unpack and copy to windows then softreset
Click to expand...
Click to collapse
Thank you!! Worked perfectly.
I thought the cab file MasK put together would do everything but apparently it didn't work for me. Cheers anyway MasK.
henks works perfect for me too...
Trem said:
Hmm I get "There is no WOW HD driver loaded. The control panel will now exit."
I installed the cab created by MasK.
Any ideas please?
Click to expand...
Click to collapse
I got that when I tried to run it before doing a soft-reset.
After a reset, it's all good. My cab does have the extra cpl file in it
Anyways, after soft-resetting it, my settings are all gone. Anyone experience that?
Worked for m using the attached cpl.
ROM Version: 1.93.456.2 WWE
Tryed this one and works perfect.
I made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Tested and working on the following Roms:
SimpleOS Xtralite v2.1, HyperDragon 4th Feb, PDA Corner Ultimate v17, v19 & v20, Anryl's 15/3 6.S rom, AthineOS WWE, WM6.5 betas (HyperDragon and PDA Corner works with HTC Voice Recorder and VITO Audio Notes, rest confirmed with VITO Audio Notes).
Download the 2_Way_Recording cab (rapidshare) *HERE*
EDIT: Made a new cab combining my 2 way recording plus the incall enable edit from pocketnow.com to enable BOTH sides to be recorded clearly from the dialer menu after a call has been established. It does not affect the ability to use a 3rd party app if you want, just gives you extra ease so you dont have to load any new programs up when you are in a call. Install the following cab to device memory, then once a call has been established just goto the dialer menu and select record. It will record in .wav format and save the recording to the Device\My Documents\Notes folder.
Download the 2_Way_Plus_InCall_Recording cab (rapidshare) *HERE*
mskip said:
First thanks to nick_martin for originally posting this in the ICR for Kaiser (2 side call recording software) thread.
I just made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Download the cab *HERE*
Click to expand...
Click to collapse
so sweet ty skip
Thank you for this contribution.
Thanks bruv gotta try this out
If it works for you then report back what phone, rom and radio you are using it on please
mskip said:
First thanks to nick_martin for originally posting this in the ICR for Kaiser (2 side call recording software) thread.
I just made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Download the cab *HERE*
Click to expand...
Click to collapse
I tested on two different roms. The first rom from Anryl's 6.S rom 21179 didn't work. Tried two radios (didn't take note since it didn't work). Was using Resco audio recorder and when in record mode, call comes in, message popped up saying cpu overload.
This morning, I tried on SimpleOS Xtralite v2.1 and with the radio recommended (1.70.18.02), it works. The audio from far end is rather soft during playback.
Congratulations!
Works great for me, ty for sharing this, as i'm sure most of us wouldn't have seen it in the original thread.
Thanks alot mskip
Oh and I'm using an AT&T Tilt with Hyperdragons 02/04/2009 IOLITE Rom with Kaiser 1.65.21.18 Radio. Worked just fine using builtin htc audio recorder and Vito Audio Notes Touch
zard said:
I tested on two different roms. The first rom from Anryl's 6.S rom 21179 didn't work. Tried two radios (didn't take note since it didn't work). Was using Resco audio recorder and when in record mode, call comes in, message popped up saying cpu overload.
This morning, I tried on SimpleOS Xtralite v2.1 and with the radio recommended (1.70.18.02), it works. The audio from far end is rather soft during playback.
Congratulations!
Click to expand...
Click to collapse
Tested on Anryl's 15/3 6.S rom after fresh flashing. Works with 1.70.18.02 radio. I only have SMS restored, Resco Explorer, PCMKeyboard and Resco Audio Recorder installed. Didn't get the cpu overload problem. Need to complete my Exchange 2007 Sync and finish installing the rest of the apps again before I test again.
Recording volume is rather soft though, even though volume had been set to maximum, same as for my TyTN II volume.
It seems not work in Diamond..
eastwoodwang said:
It seems not work in Diamond..
Click to expand...
Click to collapse
Phone or Rom?
Great job mskip ! Finally working for me !
ROM AthineOS WWE, RADIO 1.71.09.01 and VITO AUDIO NOTES 1.37
Thanks
Finally got this to work with stock AT&T Tilt
Thanks to everyone involved.
Vito Audio Notes was tricky to figure out. I uninstalled and reinstalled it several times before I got the settings right.
Move the yellow equalizer all the way to the left when recording. Set the microphone gain to high.
If you move the yellow equalizer all the way to the right, it will only record very loud sounds, which doesn't work for recording phone calls. If you set the microphone gain to low, the recording will be hard to hear when you play it back. You'll have to hold the speaker up to your ear.
Thanks mskip & OP
Runs perfect with PDA v.19 & VITO AUDIO NOTES 1.37
Can't believe that after all this time 2 way works wonder if it would on Dash?
stylez.
Thanks Sir mskip,
Could it be mirrored?
Thank You
This is so sweet, now we have 2 solutions on a issue that I've been trying to solve for about 1,5 year...
What happens if you install this fix with the ICR driver installed??? Let's try! I'll report back later for those of you who allready use ICR but want a louder recording.
stylez said:
Thanks mskip & OP
Runs perfect with PDA v.19 & VITO AUDIO NOTES 1.37
Can't believe that after all this time 2 way works wonder if it would on Dash?
stylez.
Click to expand...
Click to collapse
I dont know you should try it lol its only a registry edit rather than overwriting drivers and if it doesnt work you can uninstall it
Yeah I know what you mean I have been looking for some way to record both sides of a conversation for about 3 years when I got my old Hermes. Even tried going through bluetooth to my pc and recording that way lol. All it took was a few simple registry changes to allow this. I was always told it was a hardware problem and would never be possible lol. Im happy now
When I went into my registry to test this method my values was already set as the original post (http://forum.xda-developers.com/showpost.php?p=3463124&postcount=75)...
I wonder if this is what ICR does, is it the same solution??? Have anybody done a deep analysis of the ICR cab?
I was hoping for a louder recording...
jorra said:
This is so sweet, now we have 2 solutions on a issue that I've been trying to solve for about 1,5 year...
What happens if you install this fix with the ICR driver installed??? Let's try! I'll report back later for those of you who allready use ICR but want a louder recording.
Click to expand...
Click to collapse
Ok let me know what happens
After you install ICR the only way to get rid of it is a Hard Reset. Not sure how they will work together maybe the registry edit will bump up the volume with icr.
I think the registry changes are more compatable then using ICR as alot of people seem to have problems getting it working.
Report back
jorra said:
When I went into my registry to test this method my values was already set as the original post (http://forum.xda-developers.com/showpost.php?p=3463124&postcount=75)...
I wonder if this is what ICR does, is it the same solution??? Have anybody done a deep analysis of the ICR cab?
I was hoping for a louder recording...
Click to expand...
Click to collapse
I guess if your recorded volume didnt increase then ICR is taking control of rerouting the incoming sound. With JUST the registry changes the volume is very loud. I had a 30 minute phone call yesterday and VITO Audio Notes recorded both sides perfectly. Maybe you could try a hard reset sometime to get rid of ICR and then try a comparison with just the registry cab
mskip said:
I dont know you should try it lol its only a registry edit rather than overwriting drivers and if it doesnt work you can uninstall it
Yeah I know what you mean I have been looking for some way to record both sides of a conversation for about 3 years when I got my old Hermes. Even tried going through bluetooth to my pc and recording that way lol. All it took was a few simple registry changes to allow this. I was always told it was a hardware problem and would never be possible lol. Im happy now
Click to expand...
Click to collapse
Never guess what it works
Going to do a bit more testing as not sure if the RoseROM worked without as never tested it will also test Kavana's "as know that didn't", will link to you if all fine.
Hey,
Just put the newest version of xdandriod TOPAZ on my HTC pure and it works perfectly except that if someone calls me it won't have a ringtone (vibrate works fine however).
Is there a way to fix this problem?
The only alteration I've made is changing CDMA='1' to CDMA='0' in the Startup.txt
Cheers
there is no way to fix it yet
lets wait
Try RingoPro app...it may fix this
Tried ringopro 1.2.28 and it didn't help.
zooster said:
Tried ringopro 1.2.28 and it didn't help.
Click to expand...
Click to collapse
this was soooo clear, as this tool doesn't do anything about the "broken" sounddriver.
I hope you didn't spend money on it
Hehehe
I tried the free ringo and it did nothing.
Looks like it's a matter of waiting until it gets resolved!
There is no app that will enable sound ( ext. speaker ) because its a primary kernel issue.
Driver posted below is only for X1. Don't install it on other devices!!!
Don't know where should I post it, but I think it is more suitable for ROM Dev forum.
Everyone who tried to record calls on X1 knows that our phone records only YOUR voice,
and you hear your friend's voice badly. Driver posted below fixes this problem.
Installing:
0) Full backup (use SPB Backup, for example)! I don't take any responsibility for broken phones!
1) Install driverwiz_2wayrecording.cab
2) Soft-Reset
After that you'll get "Record" menu item during calls, also you will be able to use third party recorders like Resco Audio Recorder, Vito Audio Notes and so on.
Quality isn't as great as when you record only one line, but it is much better than it was before.
You are free to use this driver in your ROM if:
1) post a link to this topic and write a little patch's description in one of the first posts of your topic.
2) write author's nickname ("ultrashot" )
UPD (5th of september):
Added cab made by DriverWiz util, with it you don't have to install NewSDKCerts.cab, so it means less problems with certificates.
7th of september:
deleted old cab and certs, use only driverwiz created one.
v1.2:
http://forum.xda-developers.com/showpost.php?p=8434567&postcount=44
Wow, it's a new and fresh driver for record. Great to UltraShot. (Is it the same name on s*nse??)
dna_voluntatis said:
Great to UltraShot. (Is it the same name on s*nse??)
Click to expand...
Click to collapse
yes, that's me
Cool! Thanks for sharing bro !
ultrashot said:
yes, that's me
Click to expand...
Click to collapse
Wooow, it's a nice to see you in these thread, You're my Fav Master (Many thanks for the ELF)
Oops, seems vulcan dialer can't record at all...
Ethermind, download Resco Audio Recorder or Vito Audio Notes, they can record.
anyone using energy rom tested this driver yet? please specify your rom and version used to test this driver. I'm going to backup my energy rom b4 test this one now thnks ultrashot
Ethermind said:
Oops, seems vulcan dialer can't record at all...
Click to expand...
Click to collapse
Same to me, my X2 didn't have any audio when install this sdk.
yesternova, it is only for X1, that's why it is posted in X1 section.
Ethermind means that vulcan's dialer doesn't have "record" button in dialer (he tests it on X1)
No sound on my X1, stock ROM R3 hixx
womanizerzz said:
No sound on my X1, stock ROM R3 hixx
Click to expand...
Click to collapse
Have you installed NewSDKCerts.cab? No sound (on x1) means certificate problem.
However I haven't tried it on stock ROM, only on ROM without certificate checking.
Thanks. I can finally record.
little update:
added cab made by DriverWiz utility, it should install better and more reliably on stock roms.
Thank you. My phone was ok with new cab, I dunno why i had problem with installed sdkcert.cab
ultrashot this is awesome! Unfortunately for me a bit to late as I have moved from the X1.
2-way-In Call for X1/plz specify engines for which these drivers are!...
Hello,
onto my Leo HD2 these drivers caused a complete fail of sounds, even phone didn't ring any more. So I had to perform a hard-reset, thus wasting my time. Fortunatedly Iade a complete system-backup before installing these not-functionning drivers. Please be so kind to tell in future, for which phones your drivers are written for. Thanks!! Inuli
inuli said:
Hello,
onto my Leo HD2 these drivers caused a complete fail of sounds, even phone didn't ring any more. So I had to perform a hard-reset, thus wasting my time. Fortunatedly Iade a complete system-backup before installing these not-functionning drivers. Please be so kind to tell in future, for which phones your drivers are written for. Thanks!! Inuli
Click to expand...
Click to collapse
That's completely your fault!!! Didnt you see the tittle say "[DRIVER] 2-Way In-Call recording on X1" ????
On HD2 you dont need to modify the driver, just add this key and it should work!
[HKLM\Drivers\BuiltIn\WaveDev]
MixModeRecord=1
Thanks, I have tested and it works on Laurenti's ROM.
Work on Jack's 5.x ROM too. Any idea how to decrease a little bit the other party voice level? It is recorded way to loud with too much distortions leaving no room for my voice. It's like 130% with 70% ! Maybe a tweak in registry or something? Thanks!