Database Develop

Trinity Call duration reset please help??

I install hard spl 1.3 then try to reset my htc p3600 trinity with this command in mtty bat not work , i try this and work in hermes and kaiser bat in trinity not. So can somebody helo me to reset call duration in trinity please and write how and what need to do.
this command in mtty and hard spl1.3 not work i try this:
1) put device in bootloader mode
2) disable activesync usb connections
3) connect to bootloader using mtty.exe
4) when you see "USB>" prompt type this (DO NOT COPY-PASTE):
rtask b
0 <--- wait until you see a "0" here
ate1 <--- enable local echo
atv1 <--- verbose output for return values
[email protected]?1 <--- get outgoing call time
[email protected]?0 <--- get incoming call time
[email protected]=270F,270F reset both counters BAT RECEIVED ERROR??
In hermes 100% work with hard spl1.2 and in kaiser when security unlock also work bat why this not work in TRINITY . Is any solution that can help me to reset call duration .plaase do not sent message that hard reset will remove call duration .!!! this also not work As i can see i need special bootloader i mean hard spl that this command work..So who can help???

try with hard spl1.2
try with hard spl1.2 - radio upgrade will also not work with hard spl1.3 on the trinity -

Carlo626 said:
try with hard spl1.2 - radio upgrade will also not work with hard spl1.3 on the trinity -
Click to expand...
Click to collapse
With hard spl 1.2 command rtask b in mtty not work ,so plase only write if you try and know that work.

i tried without success.maybe no way to reset it until now

Finaly work after use trinity unlocker and hard spl 1.3
Cmd>rtask 4
Cmd>rtask 7
Enter Radio Image
AT-Command Interpreter ready
0
atv1
OK
[email protected]?1
@TALK: 00003B3F
OK
[email protected]?0
@TALK: 00005176
OK
[email protected]=270F,270F
OK

[SOLVED] Stuck at 4 color screen

Hi i have a vodafone VPx, and i hard reset it and now it is stuck on a 4 colour screen it says Made BY D-TWO
R: NONE
G: NONE
D: W6.5.X
i tried putting it i bootloader mode but i get a white screen when i press the mail button. PLEASE help me and provide me with all the links as i am a TOTAL NOOB i got my VPx yesterday so i dont know anything and this is my first WM phone. I do not know what rom it is using as i bought it with it already upgraded. please help
thanks

RECORD+CAMERA+RESET for a few seconds put this options like it:
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
with RECORD you move and with CAMERA change the values, at the and press MAIL.

tried that before it gets stuck on a white sreen
oh and i put my phone in boot loader mode and installed wm6.5 but it is not successful please someone send me link to wm 2003 se

Here the link for win mobile 2003 se but is for qtek 9090, i don't know if is good for your device http://www.megaupload.com/?d=PC047PQD

[SOLVED] Stuck at 4 color Screen
OH if this is helpful i will put your name in my Sig you are the best thank you i wish it works
it should work it is the same as the QTEK 9090 just looks different
EDIT: it didn't work extended ROM ERROR UPDATE ERROR 113
EDIT 2: fixed it and updated to WM6.5.5 how?
crabiorc said:
You will need the program MTTY(Attached with this post).
1) Kill activesync processes: Ctrl+Shift+Esc in Windows to bring up Task Manager. Kill wcescomm.exe and WCESMgr.exe (by selecting the task on the processes tab, and clicking the End Process button below)
2) Phone needs to be POWER + Record + Pen Reset and on Serial/USB screen. COnnect it to the PC, and it should show USB, with the backlight remaining off.
3a) Run mtty1.42.exe
b) Select USB from first list (where COM1 is displayed. Don't press USB button). If USB (or a list item containing USB) isn't in the list, then you have't connected to the PC properly.
(Leave default parameters: 8 bits / Flow Control NONE / Stop bits 1 / Parity None / Local Echo No)
c) Click OK
3) Run following commands:
[press enter first to get USB> prompt]
USB>
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
USB>set 14 0
6. type "task 28" to get your device formatted
USB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
7. type "task 0" to ask your device reboot
USB>task 0
USB>
8) Exit the program, then if you have already got a rom installed then just soft reset
9)Now be back to the Usb/Serial screen and run your favourite ROM upgrade-A clean installation ( look for tutorial or just get the RUU from Chef Tony)
Click to expand...
Click to collapse

didn't work for me, at first the phone shows only 4 colored screen, when i press "mail" button, it's stuck on white screen, no sounds no nothing, any ideas? ;/

[Q] [Kernel]Devil2_94_i9000

you can change ram setting by doing (or use command center or similar):
echo 1 > /sys/kernel/bigmem/enable (this gives you xl mem of 391 mb)
echo 2 > /sys/kernel/bigmem/enable (this gives you bm mem of 403 mb (this is breaking 720p))
echo 0 > /sys/kernel/bigmem/enable (this gives you cm9 default mem of 378 mb)
you have to reboot to make changes work
Click to expand...
Click to collapse
I do not understand this. I do?
Someone I can better explain the steps?
I want to use bigmem 403 mb.
PS: do not let me post in the original post. for being a noob.

Hi
- check if /data/local/devil folder is created, if not, make it.
- grab Command Center from Play Store.
- download "devil.json.zip" (page 480)
- remove the ".zip" from the name.
- put this file into /sdcard/Android/data/com.askven.commandcenter/files/
- open Command Center, menu, preferences, tick execute on tap.
- close it
- reboot.
- open CC. and hit "Devil"
- here you can set zRam hitting "2".
- reboot
- open Terminal Emulator and type "free", you should get values by "Swap.
Code:
http://forum.xda-developers.com/showthread.php?t=1445214&page=519

[Q] How to enable Ad-Hoc in custom ROM?

Hello.
I've just installed Achotjan's SDE ROM. Rom is great for me and I would like to keep it on my phone, but...I use Ad-Hoc network in my home, I haven't got a router so I can't use WiFi. Please tell me how to enable Ad-Hoc on this ROM. I've already tried to enable the standard but no result...
Please for fast reply

Using root browser or any of those,
navigate to /system/etc
find tiwlan.ini -edit
and find those lines:
WiFiAdhoc = 0
WiFiWmmPS = 0 # Use 1 on WiFi test in order to configure PS to work in WMM mode
Change to:
WiFiAdhoc = 1
WiFiWmmPS = 0 # Use 1 on WiFi test in order to configure PS to work in WMM mode
That should do the trick
Sent from my ST18i using XDA

Not working

Did you save the changes? View the file again to make sure the changes stick. Did you restart the phone after changing the adhoc value?
[edit] googled this up for you: http://forum.xda-developers.com/showthread.php?t=1253087
Also:
http://mobilecon.info/fix-wifi-adhoc-problem.html
And:
http://forum.xda-developers.com/showthread.php?t=1260621
if none good, might just be easiest to do this:
http://forum.xda-developers.com/showthread.php?t=1559172
Sent from my ST18i using XDA

Of course I saved the changes and restarted the phone. And none of these solutions is not working

[Guide] Change Navigation Buttons order (Not Tested)

Hello , for changing the navigation buttons order
try this trick- not tested it myself may be some one can try and provide feedback
This is a converted or translated info so there might be some error could be occurs during the process so use it with your own risk
To change the order of the buttons found the following hack:
adb shell
settings put secure sysui_nav_bar "space, recent; home; back, space"
this is another trick that will hide notification , not tested ,
adb shell
settings put global heads_up_notifications_enabled 0
Who has the root and terminal emulator, the command format is:
su
settings put global heads_up_notifications_enabled 0

hi, tried this you need to remove the space inside the quote (not the word space)
settings put secure sysui_nav_bar "space,recent;home;back,space"