Before my LED's short-circuited in WM6.0, I had Kaiser Notify set up and it worked great.. When I got an email or SMS the blue LED lit up, but no silly Signal or Bluetooth flickering lights.. I forget exactly what else it did, but I think I also had some lights for missed call, etc...
WM 6.1 I can't get Kaiser Notify to do anything except disable LEDs.. So I could disable the blinkies, but email/sms/etc don't seem to do anything. Same with nueLED basically, except it does start to blink the appropriate LED and never stops blinking it!
I just want something that'll stop the Signal and Bluetooth blinking, but give me some LED notification of missed call/email/im/text etc.
I use phoneAlarm as part of my standard install, Flexmail for email, and using the WM6.1 text as its threaded view so far seems fine, although I was previously using ExtremeText and could go back to it if necessary. I've tried phoneAlarm doing stuff with the LEDs or not in the "Extras" menu.
Does anyone have nueLED or Kaiser Notification working in WM 6.1, and suggestions for configuration? Other suggestions?
I've been using Kaiser Notifications and it works great. I have it notify me of missed calls and Messages. It will remind me if I don't dismiss the alert in a period of time.
brutel1 said:
I've been using Kaiser Notifications and it works great. I have it notify me of missed calls and Messages. It will remind me if I don't dismiss the alert in a period of time.
Click to expand...
Click to collapse
Does it blink to remind you of missed calls and messages? Maybe it's arguing with phoneAlarm or something... but not giving up phoneAlarm, I'll live with no LED notifications. At least now I'm getting vibration, I didn't have that before.. heh.
my kairser notifications stopped working when i installed phonealarm also. given the two i would keep phonealarm since it seems to be the least bloated profiler out there, imo.
Related
Hi guys,
I have a strange problem with the TYTN II. I put it to vibration using the HTC home ant it is OK, vibrating when somebody calls. Then suddenly, without me changing anything, it starts ringing as if I changed it to "Normal" profile. When I look at the HTC home I see it still has the "Vibrate" profile selected. I have to press on the "Vibrate" again to make it go to vibration again.
This strange thing happens randomly (or at least I cannot find what causes it), sometimes when I have used the phone, and sometimes even when I haven't.
Any ideas what the problem might be?
Thanks.
TheAvenger said:
Hi guys,
I have a strange problem with the TYTN II. I put it to vibration using the HTC home ant it is OK, vibrating when somebody calls. Then suddenly, without me changing anything, it starts ringing as if I changed it to "Normal" profile. When I look at the HTC home I see it still has the "Vibrate" profile selected. I have to press on the "Vibrate" again to make it go to vibration again.
This strange thing happens randomly (or at least I cannot find what causes it), sometimes when I have used the phone, and sometimes even when I haven't.
Any ideas what the problem might be?
Thanks.
Click to expand...
Click to collapse
Have you gone to Settings>Phone and set the Ring type to "vibrate and ring"?
You can also use Settings>Sounds & Notifications>Notifications and set "Phone: Incoming call" to "Vibrate and ring"
Hope this helps
Yes, I have all the settings. I change between the "Vibrate" and "Normal" profiles when I am in meetings (vibrate only) or generally (normal, ring + vibrate). The problem is that when I set the vibrate profile, the phone automatically rings sometimes, with sound, which I don't want in a meeting.
reminders?
This problem has just started to appear on my Kaiser. It seems to show up after a reminder appears. I have turned off all sounds and reminders except calendar reminders but vibrate still gets changed to ringing. I have also used Kaiser Tweak to change the defaults.
I don't what triggered this but it seemed to start when I uninstalled FlexMail 4 and then installed Flexmail 2007 but that may be coincidence.
A real problem in meetings or in a hearing where an official can really get upset over a ringing phone.
I still don't have a solution. I don't use FlexMail (any version) so I don't think this is the problem. It could be the calendar but I have not found any connection yet.
Work around
This is by no means perfect but it will prevent embarassing moments. Try recording a "silent" ring tone and using that for your ringer. Then all you miss are phone calls. They, of course, go to voice mail.
I had a similar issue, however it was in reverse, by once choosing the automatic profile in the HTC home.
Basically the automatic feature remains active after selecting it once, so after the reminder, even if it doesn't have time if your next block of time happens to be "free" it will revert it back to ringing.
Unfortunately I never found a solution and now have a new Kaiser, which I have avoided selecting it since getting the phone.
bluetooth too
Yesterday while on a call using a handsfree bluetooth device, a calendar reminder popped up and my bluetooth connection was dropped simultaneously. The call was not dropped and I was able to turn on the handfree connection again using the menu.
Which has led me to search for these type of problems. I found a thread that addresses a way to turn off push mail notifications. I understand the same "fix" works with calendar notifications.
[http://forum.xda-developers.com/showpost.php?p=1565104&postcount=8[/URL]
Ostinato said:
Yesterday while on a call using a handsfree bluetooth device, a calendar reminder popped up and my bluetooth connection was dropped simultaneously. The call was not dropped and I was able to turn on the handfree connection again using the menu.
Which has led me to search for these type of problems. I found a thread that addresses a way to turn off push mail notifications. I understand the same "fix" works with calendar notifications.
[http://forum.xda-developers.com/showpost.php?p=1565104&postcount=8[/URL]
Click to expand...
Click to collapse
Here is a thread on notifications.
http://forum.xda-developers.com/showthread.php?t=330872
I am now sure that the problem is connected with the calendar. It appears when I make some changes in an event (not always but in about 90% of the cases). I am synchronizing with Outlook and I think the problem appears when I change an event that was already synchronized. By "changing" I mean even dismissing the alarm when it goes off.
Any ideas what I could do?
My phone has developed a strange problem whereby it no longer makes any audible tone when someone rings! If I set it to vibrate, it does indeed vibrate, but if its set to ring, its completely silent. The incoming call notification is displayed from S2U2, and I’ve tried changing the ringtone to ensure it wasn’t having difficulty finding the file, but it doesn’t seem to work. I’ve verified the volume is set to ring, but its still not working. Has anyone experienced this or able to suggest a possible fix?
6.1 stock att tilt
I have the same problem and really like some help towad this matter. see mines is a little different it rings,but it's low but once the call comes to the end of the call volume get loud like it should at the begening. i thinks the cause of this is the s2u2 on my tilt . everything works but incoming call is so low ,I do't know someone was calling until they hang up the volume comes back it's like s2u2 ver.136 muffes my ringtone untile the call end someone please take the time out and give alittle help over here plz asp.
I have the same problem too. I changed from ATT stock ROM to Garmin DK 1.2 ROM and then after a month, the phone stopped ringing for incoming calls. I upgraded the ROM to Garmin DK 2 and the problem temporarily vanished and then started again after about a month.
Does anyone know about this problem? For now, I am installing the HTC Kaiser ROM to test if that solves the problem.
random freezing
I've been having the similar issues with my tilt. It freezes and will vibrate when a call comes, but no sound and it won't stop vibrating until i soft reset. It does it randomly and sometimes it freezes before the number can be displayed so it is shown as an unknown number and i don't know who's calling because after the phone restarts the last call is not in the history. I have a few programs installed like skyfire, tcpmp, s2p, and i use my bluetooth headset at almost all times and i still can't answer with the headset on. I also have the HTC home plugin installed but it came with the windows mobile 6.1 update.
idea
Hya,
I had the same problem with my Niki and it intercame even with the Kaiser.
On Niki the problem was on WM6.0 .. after I upgraded no problem came. The "vibration freeze" never happened again and it's ringing every time.
On Kaiser the problem was in mirror. The ringing functioned well with WM6.0 and the problem came with the upgrade to WM6.1.
I can only think that the problem was that the ROM was broken but not sure.
An idea which I can gave to you to resolve a bit the problem is to install SPB phone suit where you can set ringtones to the calls, SMS, MMS and e-mails (and on newer versions maybe to many other things). It worked on my Niki `till I didn't upgraded (I didn't try it on WM6.1).
Never tried on Kayser but it worked for sure on Hermes.
Just try it, you can be sure that you don't brake anything and SPB phone suite for me was a usefull prog. Friendly interface, easy use and VERY usefull.
Have luck
I was using the "Missed Call" app, but it recently seems broken, and i'm looking into alternatives. I'm using handcent sms, so i can do repeating notifications for sms and mms, but what about phone calls? I want to be able to repeat the vibration alert every few minutes, as my phone is frequently in my pocket, and i can't see the led blinking in there.
Any suggestions? Any replacement / hacked phone.apk's that can do repeat notifications?
I have a problem with SMS notification.
"Wake up on new sms" is disabled and that is also what I want.
When backlight is on and recieving a sms, a sounds rings and the phone is vibrating so Sound and Notifications are set well.
But when the backlight is off and the phone is locked nothing happens when I recieve a new sms. No vibrating and sounds.
When I put on the backlight on by the button on top of the phone the sms notification is showing up in the screen and at the same moment the vibrating is working. But now I have to turn on the backlight many times a day to check if I have a new SMS.
How can I fix this? I don't want to turn on "Wake up on new sms" function because the phone is unlocked then. I just want to hear a sound and vibrating when recieving a SMS if the phone is locked and background is off.
I know for sure in the original ROM it is working the way I like. By the way, I'm using the Basics custom ROM with Titanium skin from Rottgrub.
i would change rom it works fine with the rom i use
Hey guys..unless I'm missing something...there is no notification LED?....I keep missing emails and texts because there is no alert?
Ok..my bad I searched and there isn't one...sucks...That's a deal breaker for me.
The little green light flashes on mine when I get a new SMS, not sure about email
I have an LED light, that goes on for battery charging. I assume it works for notifications too.
I have no notification for email or SMS unless I turn the phone on.
adesonic said:
The little green light flashes on mine when I get a new SMS, not sure about email
Click to expand...
Click to collapse
Erm how did you make it do that? only lights up on mine when charging and if theres a missed call.
Hope someone makes the "NO LED" app for WP7 soon. IMO that app is far better than any notification LED.
do we have any sort of notification program?