Hi everyone, after upgrading to the TNT.19199_TouchFLO_Wizard my phone is having some weird behavior specially with the signal of the phone. It's lost signal all the time and I have to either restart the phone or search for the network manually. Also the wireless sometime doesn't detect any network and I have to restart the phone.
Phone: T-mobil MDA = HTC Wizard
Thanks.
Related
Hi guys, my friend bought himself this devise about week ago and everything was fine till he accidenty emptied the battery, since then there is a radio problem in his device.
The problem is that he cant get a network and he has no signal notification.
I'll be more specific: the device is finding a network but can't register on the network. I tried about evrything i knew (find networks manualy, change from 3g to gsm, tried some diffrerent sim cards and even HR) but nothing helps.
If anyone have another idea i'd like to hear.
Thanks.
P.S sorry for my english its not my main language.
Have you tried to re-flash to the HTC ROM and seeing if that might help? How about running the Network Connection Wizard?
Problem with 3g after emptying battery
My phone worked flawlessly until I emptied my battery. Now my 3g connection connects briefly and the just disconnects, it's unusable. I've switched to 2g and it works good, but something happened to my phone after it died because of an empty battery. Could someone please figure out a way to make 3g work again
Regards,
Peter
Hi,
I recently purchased an AT&T Tilt (HTC Tytn II) and unlocked it so that I can use it with the Rogers Network. It worked perfectly for about three weeks then I took it to Orlando for a vacation. While I was there, I change the network setting to manual and connect it to AT&T Roger so that I can use it as a roaming phone. When I got back to Canada, I changed the network detection back to automatic and it connected to Rogers for about 10 seconds then it lost the connection. So for about 10 seconds, it worked but only lasted 10 seconds. I also notice that when it connects it shows E (Edge) as a data connection. After 10 seconds, it changed to 3G. As soon as it changed to 3G, it loses the connection.
I wonder if anyone has this problem. I don`t know if this is because I used it on an AT&T roaming network. I`m very puzzled and any help is greatly appreciated. Thx!
I am having the same problem. I travel to New York quite a bit. My phone would give me a message that it was unable to connect to the GPRS network. So I would go into the Comm manger and deselect the 3g. Then the phone would get a signal. I was not getting a 3g signal, but an edge signal. When I would come home to Ft.Lauderdale the phone would work fine no problems with the 3g till last week.
Soft reset I get the 3g signal 4 bars then it disappears I get no signal ! and then I get an Edge signal in about 5 seconds or so. Everything works but I am unable to get the 3g speed.
If I try to force the phone into a 3g signal by selecting WCDMA on the band I can get a 3g icon. The voice part works fine and displays utms but any time I try to use the data I get some sort of error message. Like dialed "proxy" no response or the remote party would not connect.
Do you think that we might have something corrupting the radio?
Scott
Old At&t
8525 Radio 1.54.07.00
HTC lite 2.5/ Black Satin
spl 1.04/ 2.10
My old at&t rom doesn`t give me the option of selecting the band. Maybe I should flash it with HTC rom and at least get the voice part to work. I don`t know if the security scanning machine at the airport will harm the phone in anyway. They always ask us to take out the laptop and camera separately.
I have a HTC Tytn II with KPN network(flexibel) and internet, the problem I have is that I can't change the band rate from GSM in AUTO, when i change it I have no network anymore, so the network is G and not 3G.
Please help me to solve this problem.
ROM 3.29.404.0. NLD
Radio 1.65.16.25
Protocol 25.83.40.02. H
Hi I changed you title to something other that "NEED HELP".
You might get some more help now, hope you don't mind.
Ta
Dave
This sounds like a problem I had a while ago. It was an antenna issue. I had to send my TyTN2 for repair in order to fix it.
The symptoms: I could use only GSM in GSM mode. In auto or UMTS mode it kept on searching, connecting, disconnecting. Repeating over and over again. First the Y! -symbol, then the three dots building up (Y...) connecting, displaying 3G-symbol for about two seconds and then everything drops dead and the whole network searching starts again. It was only stable in GSM mode, could not even make phone calls in auto mode.
After calling support they collected my device for repair. Took about a week and a half and it is now fully operational again with 3G/HSDPA on KPN network in NL.
hello. just wondering if someone has the same problem or any special advise. i Have a kaiser branded by vodafone, still using standart rom, and i have an issue regarding 3g. it seems that it is impossible to disconnect. the phone is using the auto functin to search for network, and has usual when he finds perfect network in 3g i have no problems at all. When 3g is not available and the phone auto switches to gsm it indicates perfect reception but i´m not able to receive or to make voice calls. i have tried the same sim card in other phones ando there is no problem when i switch to gsm only, so any sugestions?
This is something you should probably take with provider unless you want to void your waranty. If you are not bother about waranty I suggest change the firmware/radio. I use my on 3 network and on vodaphone and have had no issue like this at all. My firmware is Hyperdragon III. Hope it helps.
Hi volks
I have unlocked my t-mobile mda Vario 3 (aka kaiser) and everything working fine, it work with all sims(f.e. A1, telering, ...) but not with "Hutchinson 3 Austria" it is an umts network and the kaiser should work whit it!
when i put in the 3 sim i can enter pin, device searching for network, but the kaiser will not connect to network, always searching for network. i live in Vienna, a big city, there should be enough signal strength *gg*
i also tried another 3 sim but will not work tried to change band settings and network settings but will not work. i also brought the kaiser to t-mobile and they send it to service, the service says that the device works fine and is unlocked
so anybody an idea?
i also have the same problem with my o2 sim card. it acquires a connection briefly then cuts out again and just keeps searching for a network
it happened to me too, i resolved the situation by inserting a piece of paper on the top of simcard, to make pressure because with time kaiser loses pressure needed to read the card...