Related
I was perusing thru this list of WM5 hacks:
http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
and noticed the two at the bottom of the page regarding adding a Wireless status line to your Today screen (bluetooth on/off, wireless on/off as well as wireless network name) and also being able to set your phone to auto-sync the time (handy when traveling). Both hacks worked for me, seem to work real well. I'm sure there is a today plug-in that is similar but this seems to be built-in to WM5.
I'm using the T-Mobile customized 2.17 ROM for Qteks.
AKU2 ROMs tweaks
These are tweaks that have been confirmed to work on AKU2 ROMs, and confirmed not to work on earlier ROMs Show Wireless Today item
By just adding following keys to the registry will get you a nice 'wireless' today item that show Network name/status, WiFi name/status as well as Bluetooth status. Confirmed to work on AKU2 ROMs
[HKLM\Software\Microsoft\Today\Items\"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
Add time sync page to Phone Settings
To add a time sync page to your Phone Settings (Start > Settings > Phone > Options > Time Zones) , set the following:
HKLM\SOFTWARE\OEM\PhoneSetting\ShowTimeZonesPage = 1 (DWORD decimal)
And to remove again:
HKLM\SOFTWARE\OEM\PhoneSetting\ShowTimeZonesPage = 0 (DWORD decimal)
do i add the " " or do i leave them out cuz i tried it with and it isnt working im using 2.17 rom
Leave them out except for the "" around Wireless when creating the reg key. Be careful with the time sync page; when I tried it, it selected the wrong time zone but the right time.
Hi,
I cant seem to figure out how to do this reg tweak? I have PHM Regedit and have created the "wireless tab" but that as far a i have got. Could somebody help or point me in the right direction to doing reg tweaks?
cheers
I could have sworn that someone had actually written a plug in for this thing and I cannot for the life of me find it anywhere, anyone got it?
here you go guys!!!
a good plugin watch memory consumption though!
http://forum.xda-developers.com/vie...velopers.com/viewtopic.php?t=55629&highlight=
Kinmont
here the direct link to version 2
http://www.teksoftco.com/freeware/tekcommplugin002/
you may have to login first to the forum to download.
Totally not the plug in I'm after.
Thanks though...*searches more*
Okay so since I am retarded, I've got PHM Regedit and I've created the folder, but that's as far as I've gotten. I can't seem to understand what this thing wants me to do as far as adding value's to the registry. the way it's written out doesn't make much sense to me, so please someone tell me click by click what to put where.
I'm stupid. Deal with it.
Last post I SWEAR.
For those of us who hate editting the registry I found the CAB file and uploaded it here for you.
No credit goes to me, I found this on HTC Wizard Web, so credit goes to them for the find, and then the actual author of the cab file.
Thanks for this one guys, i've been wanting this type of hack for a long while. Now i can know what's going on with my wireless and bluetooth without all the guess work.
Howdy,
In about a week (assuming that G.W.B. can resist starting WWIII for that long), I'm going to build another ROM. This time I'd like to get some input on what to include.
A few things to keep in mind:
1) The goal is to include apps and hacks that appeal to the widest audience and are useful. If it's something that's not useful to a lot of people, then there's no reason to put it into a ROM. I can add more themes and ringers as well, but they should appeal to as broad a group as possible.
2) I won't include any commercial apps. Not even in an unregistered state. I might consider things that have been extracted from other ROMs, but I'm debating that with the voices in my head and will decide later.
3) Apps should be mature, not beta, if possible. I don't want to have to rebuild the ROM every time a new beta version of an app comes out.
4) If possible, attach registry hacks in the form of .reg files to your request. Or at least post the registry entry in you message.
5) It would we swell if someone could take the lead on tallying up the suggestions and help to prioritize. I'll shoot for building the ROM in about 10 days.
If we can keep the additions under 5 Megs total I think we'll be OK.
Here's what will be in there as of now (which is in the current custom ROMs)
-Oregami themes
-digital, cellular, and electronic ringers
-.NET Compact Framework 2
-A2DP/AVRCP
-Wireless Today screen plugin
-enable multi-select/delete contacts
-a hidden treasure map providing the precise pinpoint location of $2.33 in pennies that I previously buried when I was perhaps 7 or 8
First I want to say thinks for the bang up job you have done on putting together these roms for us.
The only things that I would like to see that I can think of would be the registery hack that makes GPRS/EDGE stay on all the time. And I would also like, if it is possible, anything that would make the phone us a WiFi connection, when present and turned on, instead of GPRS/EDGE.
I am not sure if it is possible to do that or not.
Usefull apps
Well I would like to have these applications in the next ROM
1) Smartkeys - http://forum.xda-developers.com/viewtopic.php?t=41060&highlight=smartkeys
2) Wakeapp - to easily setup OmapClock and other event-driven applications. http://www.kent7.com/holly/wakeapp/ , download EN version at http://kent7.sakura.ne.jp/holly/wakeapp/wa_arm021_e.zip
3) SMSDeliveryFix - to show SMS recipient name in a delivery report - http://forum.xda-developers.com/viewtopic.php?t=42696&highlight=sms+delivery+fix
4) WM5NewMenu - similiar to WM2003 "New" button - http://forum.xda-developers.com/viewtopic.php?t=40088&highlight=wm5newmenu
5) WM5torage - PDA acting as a memory card reader without ActiveSync - http://www.modaco.com/WM5torage-t238545.html
6) Some software for sending and receiving vCard via SMS.
Thank you for the great effort :wink:
The correct E or G icon
Caps, Num, lock indicators
ability to set OMPA and forget it.
smaller scroll bars
the three reptile themes at this site, I think everyone would like these, grey, blue, and red.
http://www.zombienexus.net/portal/GL_SubDirectory.asp?SEC=3&CatID=70
TCPMP-media player
Total Commander-file explorer/reg editor
Agile Messenger-great messaging app aol,msn,icq etc.
I think these are good apps that everyone could use.
the only thing i think would be beneficial would be adding all the reg edits that reg wiz adds to speed up our device, so we don't have to do it each time we clear storage. THAT would be awesome. i could care less about apps being included, i can install them just fine; but it's a pain in the ass every time i clear storage/flash new rom, that i have to redo all the reg tweaks.
I haven't found a way, but more emphesis on Storage Memory than Program memory would be good for me. I use alot of storage memory with Contacts, Email (even with moving my attachments to storage) and Calendar databases.
I used the much cleaner 2.17 RUU rom without the ringtones but did copy over a couple of them from the 2.17 with RT and OC. Also copied the OMAP clock and it's shortcuts.
A clean Rom without much of the extras would be good.
I also have customized my Cingular connection to use isp.cingular and [email protected] instead of the built in wap.cingular and [email protected] connection. I also turned of the proxy as it was interfeering with my AKU2 push from my Exch2K3-SP2 box.
Is there anyway to use the EXT ROM or add a slider bar like in WM2003SE?
J-Man5
p.s. thanks for the ROMs. I just got my 8125 about 2 weeks ago and have been having mucho grande fun with it.
ROM additions
How about:
- Total Commander
- ?? some sort of free registry editor (PHM RegEdit?)
- smartskey, I agree, but I think it's ini file needs to be in the same directory and it's small so this may not work
- RegWizard (the xda developer forum developed list of hacks), although actually i don't think this is necessary because it along with its framework requires over a meg, and you can just delete it once you install the desired reg hacks. . .
- Magic Button or some other similar task manager thing
I don't think more themes or ringers would be uniformly useful.
jason
Can you add something to truly shut down apps?
I've gotten in the habit of shutting down apps through the running programs tab under memory. Is there any way to make this easier such as putting a direct link in the Start menu to this page or on the Today list.
You know, summiter, you could just fix it so that the programs actually close when you hit the X.
Re: Can you add something to truly shut down apps?
sbuff said:
I've gotten in the habit of shutting down apps through the running programs tab under memory. Is there any way to make this easier such as putting a direct link in the Start menu to this page or on the Today list.
You know, summiter, you could just fix it so that the programs actually close when you hit the X.
Click to expand...
Click to collapse
Not unless he is going to rewrite the way Windows Mobile works. Thats a M$ thing. And also why apps such as vBar and Magic Button and InClose exist.
Summiter may be a ROM compiling wizard but lets not lay too many burdens at his feet to fix.
I'm just really happy push email is working.
J-Man5
Suggestions:
TCPMP with plugins http://tcpmp.corecodec.org/about
tGetFile.dll http://tillanosoft.com/ce/tgetfile.html
PocketNotepad http://tillanosoft.com/ce/pnotepad.html
PocketTweak http://tillanosoft.com/ce/ptweak.html
Adobe Reader 2.0 is huge and belongs in ROM. But is it popular enough? http://www.adobe.com/products/acrobat/readstep2_mobile.html#pocketPC
Continued Bluetooth Fixes
I have notice several still having Bluetooth issues with the lack of support; specifically, SSP over bluetooth. This opens up additional application possibilities not available today. I wouild like to run Bluetooth GPS with receivers such as the Holux 236 GPSlim, but the lack of SSP makes this almost impossible.
Just a thought
I'd like to see common registry hacks already applied and perhaps a txt file explaining the ones included with the new ROM. For example, the ones I listed below are from my own notes so when I re-flash I can re-apply them.
Regarding software, I'd almost prefer to see CAB files instead of pre-loaded software. Since CABs disappear once installed, we could make the choice of installing or deleting, and thus possibly save space but also gain the benefit of having them ready-to-install. You could even use different subdirectories for free vs the ones requiring a registration code to help keep the surprise / disappointment factor down (when we find out it costs money). This would also prevent a problem of competing solutions for some who prefer one plugin over another if they both serve a common function.
Along the same lines, I believe registry hacks can be applied via CAB files or maybe even .reg files (or maybe not - I'm still educating myself with all of this). You could stick with what you have for the current ROM but load it up with optional extras which could be deleted if we just didn't want them.
I think what you're doing is great and applaud your efforts!
I just started configuring my 8125 today, these are the hacks I applied so far (after stepping up to your 2.17 ROM):
Enable scrolling in IE with 4-way button
HKLM\SOFTWARE\Microsoft\Internet Explorer\Navigation\4-Way Nav
Change Value from 1 to 0.
____________________
Slide-out Keyboard Status Indicator
\HKCU\ControlPanel\Keybd
Create entry EnableIndicator and assign DWORD value of 1(decimal)
____________________
Increase your 8125 speed
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\
Change "CacheSize" value from "0" to "4096".
Assign a value of 1 to EnableCache
HKEY_LOCAL_MACHINE\System\StorageManager\Filters\f sreplxfilt\
Assign a value of 4096 to ReplStoreCacheSize
____________________
Disable menu animation – removes menu animation which uses up system resources
HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu
Change "AniType" from "6" (default) to "0" (disabled).
____________________
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
____________________
Enable 802.11g
[HKEY_LOCAL_MACHINE\Comm\TNETWLN1\Parms]
"dot11SupportedRateMaskG"=dword:00000008
"dot11SupportedRateMask"=dword:00000001
TCPMP
TCPMP definitely, I use this more than any other app on pocketpc devices.
I think you should also consider a paired down ROM. One without any Cingular addons that aren't required to make the device work on Cingular. Basically only the ones that set up MMS and the GPRS settings. I'd even leave out the proxy if thats possible.
But in this paired down ROM I'd still include a few extras like some extra themes and ringers.
And I'd put in the two programs I don't think anyone can live without, SmartSkey and TotalCommader.
Thats basically the setup I have now, but I'm wasting space in my extended ROM and other areas because there are things on my device that I can't remove and I'm not using.
azagahl said:
Adobe Reader 2.0 is huge and belongs in ROM. But is it popular enough? http://www.adobe.com/products/acrobat/readstep2_mobile.html#pocketPC
Click to expand...
Click to collapse
Is Adobe reader prefered over the ClearviewPDF Reader that is already in the ROM?
Re: Continued Bluetooth Fixes
jlsenter said:
I have notice several still having Bluetooth issues with the lack of support; specifically, SSP over bluetooth. This opens up additional application possibilities not available today. I wouild like to run Bluetooth GPS with receivers such as the Holux 236 GPSlim, but the lack of SSP makes this almost impossible.
Just a thought
Click to expand...
Click to collapse
I'm not familarwith SSP. Is it a profile? What does it enhance/enable?
Do you know if there are any WM5 devices which have it? (perhaps it can be ripped out and added to the Wiz)
knight4led said:
I think you should also consider a paired down ROM. One without any Cingular addons that aren't required to make the device work on Cingular. Basically only the ones that set up MMS and the GPRS settings. I'd even leave out the proxy if thats possible.
But in this paired down ROM I'd still include a few extras like some extra themes and ringers.
And I'd put in the two programs I don't think anyone can live without, SmartSkey and TotalCommader.
Thats basically the setup I have now, but I'm wasting space in my extended ROM and other areas because there are things on my device that I can't remove and I'm not using.
Click to expand...
Click to collapse
haha this is at least the second message that goes something like: "how about a ROM stripped of everything, but add this and that and oh yeah add this too". I say this in good fun so don't take offense. It just indicates that everyone has quite unique needs.
I will create a barebones ROM as well. But I don't want to have too many ROMs out there because I don't want to have to rebuild them all when something changes.
As far as using the Extended ROM for other purposes..as of now it can't be done. It's locked in some way that prevents effectively using as storage space. (if you try to manipulate it, it becomes corrupted). So the only use for it is to install stuff at first boot.
Well I might as well put in my two cents....but first....Summiter....marry me! I'll tell my wife to divorce me and she can take her nokia phone with her!
-Ok definitely Smartskey in the same folder as Omapclock so smartskey.ini file can tell omapclock to clock me at 216 everytime after soft reset.
-Please take out the stupid SIP keyboard...i'ts useless and can only be used by leprechauns with little fingers.
-A way to easily change splash screens.
-Hide SIM contacts
HKCU\ControlPanel\Phone
new DWORD value named "ShowSim" and set it to 0
1. Disable menu animations to increase performance:
"HKEY_LOCAL_MACHINE \SYSTEM\GWE\Menu"
Change "AniType" from "6" (default) to "0" (disabled).
- Add vibration instead of sound to keypresses in the phonepad for better tactile feedback:
for i = 0 to 9
Give an example for "i" Button:
[HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf "i"]
1. Rename Standart DWORD parameter "Sound" to "Sound1"
2. Create new String Parameter "Sound"
3. Assign value *vibrate* to this new parameter.
For this there is also a cab file available.
***this is a cool registry tweak
- oh and this is a must have, all these pda phones lack in the phone department...people on the other side of a phone call can barely hear us until you put this registry tweak in.
\\\registry\HKLM\Software\HTC\AUDIOGAIN(x)\
changed RECEIVE_UPLINK_VOLUME and EARPHONE_UPLINK_VOLUME values to CC. after that change, microphone sensitivity got better and didn't receive any more complaints.
Though i wish someone knew a way to improve the sound mic quality during speakerphone.
And there are so many ringtones in your rom summiter...they all sound alike lol. put the You've got mail.wav file for incoming mail, i have it if you want. how bout some funny ringtones or music ringtones instead?
k that's all
How do you set a city that isnt in the default list?
afaik you can only use the cities covered by accuweather.com, and i think they are all included as default.
Can anyone please tell me if you can also see a wether forecast on the weather tab or does it only show you the current weather?
I don't have the device yet, but all the screenshots I've seen of the weather page show a soft button (bottom left of screen) option called 5 Day. I'm assuming that's the forecast view.
Darrenives said:
I don't have the device yet, but all the screenshots I've seen of the weather page show a soft button (bottom left of screen) option called 5 Day. I'm assuming that's the forecast view.
Click to expand...
Click to collapse
It is the forecast view indeed. Gives you the Hi and Low temps forecasted over the next five days with the right weather icon.
Thanks... now only waiting for the pro to be released... I am so tempted to get a Diamond. But then again, I want a higher battery capacity, the flash with the camera, more RAM, microSDHC slot... ehm and keyboard
Accuweather covers every city in the world, the database for the HTC only has major cities, in this case the ones in all the states. I live in Hickory, NC. Is there any way to get this by editing the database or some sort of update?
That depends entirely on where the weather data is coming from. If it's straight from Accuweather, it may be possible to do a registry edit or something similar to get the weather for other cities. However, if the data is retrieved from HTC, it probably won't be possible as they'd only bother processing the data for the cities available on their devices.
I'm guessing/hoping that it'll work alot like the Touch so you'll be able to show your local area through amendments in the registry as noted above and in the following link:
http://blog.commsconsulting.co.uk/2007/07/26/local-weather-on-the-htc-touch/
Ah, well, I'd say that the Touch Diamond would be very similar to the Touch, so a similar registry edit should work.
Jersey is listed on AccuWeather but I can't find it on the diamond
http://www.accuweather.com/world-in...er&locCode=EUR|JE|JE---|SAINT HELIER&metric=1
Having a look for the reg key now, if anyone has found it already let me know!
- HKCU\software\htc\manilla
I Tried changing the registry to my city, but for some reason it goes to 6 cities all in asia?
Same thing happens when I change mine.
I thought it was because I was having to guess some of the Jersey code as it displays as EUR|JE|JE---|Jersey on the accuweather side but it looks like there is more to it.
My city is spelled wrong at the device.
Acuweather has it ok.
How do I fix that?
K
EUR|JE|Jersey would likely be Jersey in the Channel islands in Europe.
Wouldn't it be a bit more like USA|NJ|Trenton or something similar for a city in New Jersey????
Yes it would be for Jersey in the Channel Islands - that's where I am though
Be nice to get it working at some point, look's like there is something else that will be changing as well as just the string value as regardless of the value used it resets to 6 cities afterwards
Bad news
Hello guys,
I've managed to add a custom city to manila, but the bad news is, that manial will crash when it tries to download the weatherinformations.
here what I've done so far:
1. xxx_manila-file are SQLite-Database-Files... so get the SQLite Databaseprovider for Visual Studio from Sourceforge
2. Copy the file 2330fc3c_manila from windows-fir to your local system
3. Remove wrtieprotection
4. Open Visual Studio and add a new SQLite-Connection to that file
5. Open the Table "cities"
6. Add the City you whant to add (add one to the maximum id)
7. Close the connection
8. Copy the file to your device's windows-fir and override the existing file (user resco file-explorer)
9. Add the new location to the weather-tab
I will write a little program to edit the db-file soon... so you don't need a visual studio
I'd like very much to have mi city weather. I found the registry key too but if I modify the value with the code of my city it doesn't work, any news? I could try your solution importing the database file etc. but...will manila download the weather informations or still crash. I don't want to only add my city in the list, I want the weather of my city working.
Thank you for now
Hello,
I've tested now some other citycodes... no one worked... manily allways crash. I've no idea whats the problem... the "new city" is entered to the database as any "original". and the accuwaether-site for a city which work and a city which will crash manila are identicaly... sorry guys, but I think we have to live with the original cities.
I'm trying using your solution...I inserted the new row in the database and it's ok, but I can't overwrite the existing file in windows folder. I'm using resco explorer 2008 as you suggested. Any idea?
Thank you very much
All,
I have just received my HTC Diamond (using Vodafone network in NSW, Australia). I will be using it for phone and GPS and possibly also for (Exchange based) email.
I haven’t used Windows Mobile before, and am paranoid that I will (inadvertently) go over the data limit that my employer provides. The limit is only 100MB a month, and if I go over it is something like $1 a MB. I'd rather avoid paying this if possible.
* Is there a way to monitor data usage on Windows Mobile?
* Is there a way to configure email such that it only updates over WiFi or when connected via USB to my home PC (rather than over the mobile towers)? (My email alone would blow me way over 100MB a month)
* Is there a way to disallow any applications from any upload/download over mobile towers without my confirmation?
mjwills said:
All,
I have just received my HTC Diamond (using Vodafone network in NSW, Australia). I will be using it for phone and GPS and possibly also for (Exchange based) email.
I haven’t used Windows Mobile before, and am paranoid that I will (inadvertently) go over the data limit that my employer provides. The limit is only 100MB a month, and if I go over it is something like $1 a MB. I'd rather avoid paying this if possible.
* Is there a way to monitor data usage on Windows Mobile?
* Is there a way to configure email such that it only updates over WiFi or when connected via USB to my home PC (rather than over the mobile towers)? (My email alone would blow me way over 100MB a month)
* Is there a way to disallow any applications from any upload/download over mobile towers without my confirmation?
Click to expand...
Click to collapse
The program should be installed already, if not check your CD, it's the GPRS monitor if you are using GPRS.
Thanks - I just looked on the CD and found the GPRS monitor.
I then installed the software on the Diamond and set it up with my limit (100MB).
After that I browsed to a website on both Opera and IE. Both worked fine, but when I went back to the monitor nothing had registered (on the Chart or Report tab). Is this normal? Should it appear straight away? Any other explanation (could it have gone over something over than GPRS)?
Interestingly, there is a H at the top of the screen. Page 37 of the manual says this means I have HSDPA available. Does the GPRS monitor also monitor HSDPA?
mjwills said:
Thanks - I just looked on the CD and found the GPRS monitor.
I then installed the software on the Diamond and set it up with my limit (100MB).
After that I browsed to a website on both Opera and IE. Both worked fine, but when I went back to the monitor nothing had registered (on the Chart or Report tab). Is this normal? Should it appear straight away? Any other explanation (could it have gone over something over than GPRS)?
Interestingly, there is a H at the top of the screen. Page 37 of the manual says this means I have HSDPA available. Does the GPRS monitor also monitor HSDPA?
Click to expand...
Click to collapse
Makes sure you have checked the date you are viewing the GPRS data, I am not sure how to monitor the HPDPA, I need to monitor that also for 3G, maybe some-one else can help with this?
Check out this free sofware from Modaco.com. You can disable your GPRS/3G data connection (useful when roaming):
http://www.modaco.com/New-FREE-Utility-t246171.html
I worked it out. Page 219 of the manual shows the 'Enable connection monitoring' setting, which I had not enabled. After enabling it - it works fine.
On which CD have you found it? I got that information in the Manual, but I can't find any PPC program on any of the cds (got 2).
mjwills said:
Thanks - I just looked on the CD and found the GPRS monitor.
I then installed the software on the Diamond and set it up with my limit (100MB).
After that I browsed to a website on both Opera and IE. Both worked fine, but when I went back to the monitor nothing had registered (on the Chart or Report tab). Is this normal? Should it appear straight away? Any other explanation (could it have gone over something over than GPRS)?
Interestingly, there is a H at the top of the screen. Page 37 of the manual says this means I have HSDPA available. Does the GPRS monitor also monitor HSDPA?
Click to expand...
Click to collapse
can anybody upload this programm?
It is not available on my cd. maybe it depends on the country you live. I live in Switzerland
Its on the same CD as the manual. You run it on the PC and it is automatically downloaded and deployed to the Diamond.
Can you disable the data connection so it is never used?
Quote:
Originally Posted by mjwills
Thanks - I just looked on the CD and found the GPRS monitor.
I then installed the software on the Diamond and set it up with my limit (100MB).
After that I browsed to a website on both Opera and IE. Both worked fine, but when I went back to the monitor nothing had registered (on the Chart or Report tab). Is this normal? Should it appear straight away? Any other explanation (could it have gone over something over than GPRS)?
Interestingly, there is a H at the top of the screen. Page 37 of the manual says this means I have HSDPA available. Does the GPRS monitor also monitor HSDPA?
quote maverick ch
can anybody upload this programm?
It is not available on my cd. maybe it depends on the country you live. I live in Switzerland
have the same problem as you people have looked on the manual CD this only has a PDF file and doesnt auto boot......... v strange...
i dont seem to have any freebie software any where (except a demo of outlook 2007) including sprite back up on either of my discs, both discs are a waste of time in my opinion
bugeyes said:
i dont seem to have any freebie software any where (except a demo of outlook 2007) including sprite back up on either of my discs, both discs are a waste of time in my opinion
Click to expand...
Click to collapse
Tell us the names of all of the files in the root directories of each of your CDs.
I would like that Oprah asks me if my WIFI connection breaks.. "Do you want to enable data over 3G? Yes / no"... 3G data is really expensive here.
mjwills said:
Tell us the names of all of the files in the root directories of each of your CDs.
Click to expand...
Click to collapse
sure
on the manual cd you have:-
080519 diamond orange ouk manual pdf
desktop.ini
on the getting started disk you have:
active sync (folder) this has a file called wwe
additional applications (folder) this has a folder called wwe with nothing inside
device handbook (folder) empty
image (folder) pics
oem (folder) a few orange uk files
setup (folder) device hand bok stuff and some dlls
wmdc (folder) windows mobile device 6.1 stuff
autorun.inf
desktop.inf
start.exe
re the folders showing nothing i do have hidden files showing!
when running the setup software i only get the option to install outlook.....!????
Odd!
Oh and thanks for taking the time to look!
very little bump!
bugeyes said:
i dont seem to have any freebie software any where (except a demo of outlook 2007) including sprite back up on either of my discs, both discs are a waste of time in my opinion
Click to expand...
Click to collapse
The CDs are provided by the network hence the content will vary between them. They are not an HTC-provided (hence standard) item.
Mathew
I have ceased development of this project because I don't use TouchFlo 3D anymore. All source code is available. If anybody wants to take over the CodePlex project, just PM me and it's yours for the taking!
Overview
TouchFlo Detacher is yet another way to simultaneously have TouchFlo 3D / 2D and the regular Today screen. Previous excellent solutions include SecondToday and ManilaControl.
CodePlex
TFD development is hosted at Microsoft CodePlex! http://www.codeplex.com/TFDetacher
Tip Jar
Like this app? Want more like it or quicker updates? Tip a buck (or Euro or Pound or whatever) or two to help the author out! Click here to make a safe donation via PayPal.
Description
So what makes mine different? Well, my app is actually very similar to MastSogo's ManilaControl. The main difference is that I plan to actively develop it now for a while, whereas ManilaControl has been a bit frozen in development for a few months. Mine is also open source, licensed under the Ms-RL. Mine is on CodePlex, so download speeds should be much better than the average rapidshare link. Finally, mine is in English and not Spanish. Other than that, it's just another solution for the same problem!
I must give a hearty thank you and bow to MastSogo for inspiring me to work on this.
I believe I am using a similar technical solution to his, but mine is written from the ground up, so it shares no source code with his!
See it in action on the YouTubes
http://www.youtube.com/watch?v=uk0xWm8PMGQ
Current features
- Free up your Today screen by hosting Manila outside of the Today screen! TouchFlo Detacher can launch/show/hide/close Manila independent of any other Today screen settings. Now you can have your TouchFlo cake and eat it too! The most obvious use is to assign a soft key to toggle between seeing TouchFlo and seeing the regular Today screen.
- Supports TouchFlo 3D and TouchFlo 2D.
- NO ANNOYING SPLASH SCREEN when application launches.
- Configuration application allows advanced customizations so that this utility can be used with non-standard or untested Manila versions.
- Configuration application can clean out the ManilaActivateToday.exe from the notification queue. (That app can interefere with TouchFlo Detacher's operation.)
- Shortcuts to start/show Manila, hide Manila, toggle (show/hide) Manila, and close Manila. These can be assigned to hardware buttons (if your device has them), to virtual hardware buttons through the use of 3rd party applications such as AE Button Plus, or to gestures using 3rd party applications such as FTouchSL.
- Configuration application can customize the softkeys in both Today and TouchFlo's Home tab. You can use it to not only assign TouchFlo Detacher operations (show/hide/close), but any other application on your device.
- Launch an application after TouchFlo launches... Such as SSMaHo. It's easy. Create an attach link in SSMaHo. Put the attach link in the config: \Windows\Start Menu\Programs\SSMaHo Attach.lnk
Known Issues
- On the Touch HD, the home hardware button does not return to the Manila "home" tab. This does not happen on the Pro or Diamond. Workaround: none. Scheduled fix: unknown.
- Sometimes the clock on the TouchFlo home page will stop and go out of sync with the real time. Workaround: hide and then show manila. I may need to create a scheduled task that can do that as an automatic workaround once per day for those experiencing the problem. Scheduled fix: unknown.
History
1.0.1.1 STABLE FINAL - Fixed bugs in 1.0.1.0; Added ability to launch an app after TouhcFlo launches.
1.0.1.0 BETA - The first version of TFD that no longer requires a pseudo-service. All functionality should be identical to 1.0.0.5, otherwise.
1.0.0.5 STABLE - The "hide then show" workaround wasn't working in some instances, so I put extra detection code in to determine the current state of Manila before issuing the hide/show commands. If this doesn't work, I can add customizable delays. Also added AppToDate support!
1.0.0.4 STABLE - First release I am considering stable! It is identical to the very tested 1.0.0.3 except for one new feature. When you start the TFDService you can now optionally have it hide and then show Manila immediately. It does this VERY quickly, so you may not even notice it happening on screen. This is done so as a workaround some users are having where they cannot access the phone until Manila is hidden at least one time. Very odd behavior. It is working perfectly in my tests, but please let me know if this workaround doesn't work for you.
1.0.0.3 Beta - TF2D support I think is finally complete! Please test! New layout for TFDConfig. Standard and advanced options are now in separate tabs. More advanced options for alternate Manila configurations. Fixed bug in config where a crash could happen when you tried removing ActivateManilaToday. Toggle TouchFlo command is now available (note: this toggles show/hide, NOT show/close).
1.0.0.2 Beta - New language-neutral detection of Manila process and window handles (no longer need to know titles!). Fixed (hopefully) bug where the softkeys sometimes didn't hide correctly. Window class "search" is no longer case sensitive. Optional delay when starting Manila at system start-up (attempting to work around issue where Manila won't launch on startup).
1.0.0.1 Beta - Confg app can now start the service. The service has better error reporting. Config app can remove TouchFlo today item. No need to soft reset! TouchFlo 2D support (maybe - I'm trying!). Some crappy icons ;-) ... Service detects if TouchFlo Today item is enabled. Link to start and stop the service. Fixed installer bugs. Bug fixes!
1.0.0.0 Beta (aka BETA1) - Initial release
Download
CAB Installer: http://www.codeplex.com/TFDetacher/Release/ProjectReleases.aspx
Source Code: http://www.codeplex.com/TFDetacher/SourceControl/ListDownloadableCommits.aspx
Installation
As explained on CodePlex...
1. Install the CAB
2. Run TFDConfig (important!!!)
3. Enable all the standard Today Items you want to use
4. Do not re-enable TouchFlo in the Today items (if you do, it will undo all your other Today plugins and your device might freeze up, requiring a soft reset)
Requirements
Windows Mobile 6.1
.Net Compact Framework 2.0
A device that runs TouchFlo3D (Manila) or TouchFlo2D (Manila2D).
FAQ
FAQ
Q: I uninstalled TouchFlo Detacher but TouchFlo did not come back!
A: Changes made with TFDConfig will not automatically be undone when you uninstall TouchFlo Detacher. To get TouchFlo back, go into your phone's settings. Go into Today. Go to the "items" tab. Check in "TouchFlo 3D" (or 2D or whatever). Exit. TouchFlo will be back.
Q: I uninstalled TouchFlo Detacher but my softkeys did not go back to the way they were before!
A: Changes made with TFDConfig will not automatically be undone when you uninstall TouchFlo Detacher. Do not worry! Fixing this is very simple. Before uninstalling TFD, it's recommended you run TFDConfig one more time and reassign the softkeys to whatever you want them to be. For TouchFlo's softkeys, all you have to do is set them both to empty (as in, nothing) to get the default softkeys (phone/programs). For Today's softkeys, you can assign them to whatever you want -- calendar, phone, contacts, your choice!
If you have already uninstalled TFD, you will need to use a registry editor to reset the values. Here are the relevant keys:
Today left softkey:
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112
[Default] = Text on softkey
Open = Path to program to run
Today right softkey:
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\113
[Default] = Text on softkey
Open = Path to program to run
TouchFlo 3D left softkey:
HKEY_LOCAL_MACHINE\Software\HTC\Manila
HomeLSKText = Text on softkey
HomeLSKPath = Path to program to run (or blank for default)
TouchFlo 3D right softkey:
HKEY_LOCAL_MACHINE\Software\HTC\Manila
HomeRSKText = Text on softkey
HomeRSKPath = Path to program to run (or blank for default)
TouchFlo 2D left softkey:
HKEY_LOCAL_MACHINE\Software\HTC\Manila2D\Home
SK1 = Text on softkey
SK1Cmd = Path to program to run (or blank for default)
TouchFlo 2D right softkey:
HKEY_LOCAL_MACHINE\Software\HTC\Manila2D\Home
SK2 = Text on softkey
SK2Cmd = Path to program to run (or blank for default)
Hi,
Is this a Manila3D only switcher or will it also work with Manila2D? I have been using Mastsogo's until now, but the lack of support is a bit worrying.
motisu said:
Hi,
Is this a Manila3D only switcher or will it also work with Manila2D? I have been using Mastsogo's until now, but the lack of support is a bit worrying.
Click to expand...
Click to collapse
It may work with TF2D, I just have no way to test it since my device is TF3D. In the config, you can specify the location of the Manila EXE and the window class/titles. I'm assuming since MastSogo's did both, it's just a matter of tweaking those settings. As soon as somebody gets me that info, I can add it into the config app.
Installed on a Wizard (WM6.1 5.2.20273) running Manilla2D, set Today screen to use TodayAgenda 1.5 only. After soft reset, I get a Win32Exception with the following debugging information (see attached).
I'm checking the launch parameters in the config now (I started with the defaults).
Sheesh, I should have checked the parameters before going to the work of assembling that debugging jpeg. For Manila2D, the two references to Manila.exe need to be changed to Manila2D.exe. I still don't have it working, but at least it only throws one error message now.
I don't have any more testing time today. Good luck with your app.
thx1200 said:
It may work with TF2D, I just have no way to test it since my device is TF3D. In the config, you can specify the location of the Manila EXE and the window class/titles. I'm assuming since MastSogo's did both, it's just a matter of tweaking those settings. As soon as somebody gets me that info, I can add it into the config app.
Click to expand...
Click to collapse
As Uracil said, the name of the executable for TF2D is Manila2D. That's why Manila control needs a config program. It asked which one you are using and sets the parameter accordingly.
Fantastic. Loaded this onto my AT&T Stock, fully bloated Fuze. Works like a champ! Great app, thanks!
I will try this for sure!
TWO THINGS!
1) anybody knows a safe way to uninstall Manila Control?
2) I am a bit affraid of this "resident" thing... this program (TFD let's call it) uses one of the very scarce 32 processes? if YES sorry it's not for me (I am already dangerously close to the limit - up to the point that some sync processes don't have where to run)
nice app! well done
Ran through the steps to set it up, on soft reset the device hangs at the startup HTC animation, Hard reset time , the manila im using has the following mods:
CFC Compression
Background 4 all tabs (mun rus)
Stocks tab
HD contacts
Will investigate further..
EDIT: Havent been able to replicate this issue after a hard reset, probably something else i installed.
Minor issue ive spotted though, set left softkey in TF3D to "Today" which hides TF3D....in the blank today screen i dont see the setting for the left softkey (Which is set to "TouchFlo 3D" and should show TF3D) i still see the softkey setting from when TF3D is visible. So the effect is i cant get back to TF3D after hiding it unless i literally run it from the start menu.
NLS said:
I will try this for sure!
TWO THINGS!
1) anybody knows a safe way to uninstall Manila Control?
2) I am a bit affraid of this "resident" thing... this program (TFD let's call it) uses one of the very scarce 32 processes? if YES sorry it's not for me (I am already dangerously close to the limit - up to the point that some sync processes don't have where to run)
Click to expand...
Click to collapse
WM 6.x and newer raised the process limit to 32768, so you should be fine.
EDIT: I was wrong! Don't believe me! Keep reading below. (The short of it: WM6 is based on CE 5.0, NOT CE 6.0, which is the version of CE that doesn't have the 32 process limit.)
Uracil said:
Sheesh, I should have checked the parameters before going to the work of assembling that debugging jpeg. For Manila2D, the two references to Manila.exe need to be changed to Manila2D.exe. I still don't have it working, but at least it only throws one error message now.
I don't have any more testing time today. Good luck with your app.
Click to expand...
Click to collapse
The exception you showed is the service not finding the EXE. There are two places you need to change it. The "EXE Only" config is just the name of the EXE (for finding it in the running process list). The "full path" is where the file is located in the file system (including the EXE name!). Did you change both?
Thanks for the info. I'm going to make that "file not found" error more friendly for beta2. Also, now that I know what I'm looking for, I can add a built-in way to switch from Manila3D to Manila2D.
mrvanx said:
Ran through the steps to set it up, on soft reset the device hangs at the startup HTC animation, Hard reset time , the manila im using has the following mods:
CFC Compression
Background 4 all tabs (mun rus)
Stocks tab
HD contacts
Will investigate further..
Click to expand...
Click to collapse
Does it get to the Today screen at all? The service is in the Startup folder. All it does is try to Launch manila.exe at startup (you can actually even disable that if you want to in the config), so it would be really weird if that froze the device. Not saying it's not possible, just really really weird!
thx1200 said:
Does it get to the Today screen at all? The service is in the Startup folder. All it does is try to Launch manila.exe at startup (you can actually even disable that if you want to in the config), so it would be really weird if that froze the device. Not saying it's not possible, just really really weird!
Click to expand...
Click to collapse
See my edit above
thx1200 said:
WM 6.x and newer raised the process limit to 32768, so you should be fine.
Click to expand...
Click to collapse
No man you are wrong (100%).
In *my* WM6.1 at least, the limit is 32. Well in fact all WM6.1.
Only new WinCE (not the builds used in WM6.X) have lifted this limit.
WM7 is supposed to not have this limit (because uses different WinCE) and a very small possibility (like 5%) that WM6.5 will have this limit lifted.
With the help of Daniel Herrero (the guy that makes CommManagerPro) we even built a simple app that we run as much as we could, to test this.
Sure enough my device after 4-5 runs started killing other apps. After 1-2 more runs, I got a pop-up that said that I cannot run more apps because I reached the process limit. My device is a loaded Touch Pro.
His much lighter X1, sure enough came to the same result, but only after more runs, about 10 or something (since he had more process "slots" free).
So you probably have to (and please do) rethink your strategy (for example use a REAL service or handle things based on triggers) as processes ARE a scarce commodity in WM.
At least add a mode or something that doesn't use a process all the time (even with some extra delay). I will certainly NOT eat more of my processes.
I installed this on my Touch HD... ran config but chaned nothing, disabled TF3d and soft reset... now don't know what to do... seem to be missing a step... for example how to toggle between Today and TF3d... running hide and close tf3d in the utilities folderdoes nothing
NLS said:
No man you are wrong (100%).
In *my* WM6.1 at least, the limit is 32. Well in fact all WM6.1.
Only new WinCE (not the builds used in WM6.X) have lifted this limit.
WM7 is supposed to not have this limit (because uses different WinCE) and a very small possibility (like 5%) that WM6.5 will have this limit lifted.
With the help of Daniel Herrero (the guy that makes CommManagerPro) we even built a simple app that we run as much as we could, to test this.
Sure enough my device after 4-5 runs started killing other apps. After 1-2 more runs, I got a pop-up that said that I cannot run more apps because I reached the process limit. My device is a loaded Touch Pro.
His much lighter X1, sure enough came to the same result, but only after more runs, about 10 or something (since he had more process "slots" free).
So you probably have to (and please do) rethink your strategy (for example use a REAL service or handle things based on triggers) as processes ARE a scarce commodity in WM.
At least add a mode or something that doesn't use a process all the time (even with some extra delay). I will certainly NOT eat more of my processes.
Click to expand...
Click to collapse
You are right. I was going on what I read on another website from a while back. I just did some research and, sure enough, WM6 is based on CE 5, which has the 32 process, 32MB limit still in place.
The strategy I am using will not change as there is no way (that I know of) to write a service DLL in the Compact Framework, but if somebody knows of a way, I will certainly look into it.
EDIT: I did a check and I'm only running 24 processes with my media app, Total Commander, TFD, 3 other "service" apps (dont forget, PocketShield, VistaHide Battery Bar). That leaves me with 6 more apps until WM6 gets nervous (it seems to close after going above 30). How are you so close? I'm not judging your mobile computing habits, I'm just curious! Also, I'm thinking of rolling the "service" code into stand alone EXEs for cases like yours, but it will be very slow switching back and forth. I tested that at first before deciding on the memory resident app and it took about 5 seconds to switch each time. But maybe you'll have better luck!
abeery said:
I installed this on my Touch HD... ran config but chaned nothing, disabled TF3d and soft reset... now don't know what to do... seem to be missing a step... for example how to toggle between Today and TF3d... running hide and close tf3d in the utilities folderdoes nothing
Click to expand...
Click to collapse
It's possble the HD may have a slightly different Manila configuration than the Diamond/Pro. If you find the manila.exe and can scan the window classes and titles (such as with FDCsoft's Task manager) that will give you the info you need to configure it for the HD. If you figure it out, post it here so I can add it to the config app.
mrvanx said:
EDIT: Havent been able to replicate this issue after a hard reset, probably something else i installed.
Click to expand...
Click to collapse
GOOD! Whew!
mrvanx said:
Minor issue ive spotted though, set left softkey in TF3D to "Today" which hides TF3D....in the blank today screen i dont see the setting for the left softkey (Which is set to "TouchFlo 3D" and should show TF3D) i still see the softkey setting from when TF3D is visible. So the effect is i cant get back to TF3D after hiding it unless i literally run it from the start menu.
Click to expand...
Click to collapse
Let me see if I am understanding you. The left soft key on the "real" Today screen says "TouchFlo" but it isn't launching TouchFlo? If you go into the configuration and set the Today left soft key using my quick drop down (Show TouchFlo 3D) this doesn't fix the issue? If so, can you post what the app path is that it is showing?