Problem after Flashing: Kaiser says no Sim-Card - Tilt, TyTN II, MDA Vario III General

Hello erverybody!
After flashing my Kaiser i got the problem with my simcard, even though the simcard is in the phone my phone app says that there is no card in it.
I flashed my phone like it is described in the wiki:
1. hardSPL, i had the issue withe the white screen
2. flashed rom: RUU_Kaiser_HTC_GER_3.28.407.0_radio_sign_25.83.40.02_1.65.16.25_Ship with the KaiserCustomRUUv1 and while flashing there were no card in the phone no simcard card no mircoSD.
So then i thougt there is a simlock or anything else therefore i tryed to unlock my phone with KaiserUnlock but after that, the same, the phone says ther is no card inserted!
I tryed to flash another rom but ist the same, phones says no sim card inserted and I also tryed the card in a other phone and ther it works fine so it looks like that the problem belongs to the Kaiser.
has anybody an idea what´s gone wrong? or anybody an idea what i can do to solve this problem?

So i fixed it please close this thread or delet it its seems that my simcard had not enough contact to the pins so i stucked a little piece of paper between the card and the phone and now it works, unbelivable but sometimes the simplest solution is the best

Related

Help:: treo 750v searching..

hi all... I have a problem with my treo 750v,
since yesterday the device is keep searching.
Can anyone tell me what to do??
Thank you...
you should check your SIM card, it may have been loose from the slot. If not put another SIM in to see if your SIM in corrupt. Then you can figure out if the problem is with the device itself.
I already try diferent SIM card but still the same...

Simlock to a specific sim card?

Hello,
I have a Kaiser locked by the operator.
The phone ONLY works with the original Sim card!
Does not work with cards from other operators, or even from the same operator.
I always get a message: "The SIM card is missing".
I already tried the several tutorials and tools to unlock it.
Even tried to change the ROM to recent versions.
Already tried differente versions of SPL... differente radio patches, different ROM's... 6.0, 6.1...
And no luck.
Never got that "Simlock" window that most tutorials talk about...
Every SIM card I try I get the "The SIM card is missing" message...
PDA features always work ok..
Any ideia?
Thank you so much!
Moved as not ROM Development.
http://forum.xda-developers.com/showthread.php?t=433835
dfelix said:
Hello,
I have a Kaiser locked by the operator.
The phone ONLY works with the original Sim card!
Does not work with cards from other operators, or even from the same operator.
I always get a message: "The SIM card is missing".
I already tried the several tutorials and tools to unlock it.
Even tried to change the ROM to recent versions.
Already tried differente versions of SPL... differente radio patches, different ROM's... 6.0, 6.1...
And no luck.
Never got that "Simlock" window that most tutorials talk about...
Every SIM card I try I get the "The SIM card is missing" message...
PDA features always work ok..
Any ideia?
Thank you so much!
Click to expand...
Click to collapse
It sounds like you have a sim card reader hardware issue, not a software unlock issue. Once you install a custom rom, your phone is unlocked. When you insert a sim from a different opperator, if the phone is locked, you will get a message like "sim card not supported" or something like that. Not "Sim card is missing". Try putting a small piece of paper behind the card when you close the sim card door. If that does not work, you may need to replace the reader.
j101399j said:
Try putting a small piece of paper behind the card when you close the sim card door. If that does not work, you may need to replace the reader.
Click to expand...
Click to collapse
The paper did not work...
Is replacis the reader a simple procedure?
Any ideia where i can find a new reader?
I guess my warranty was lost when I changed the ROM...
I'm Seconding the idea that you need something to help force better contact between the SIM card and the contacts inside the phone. I have had this problem before. one one of my Tilts, I just pushed down on the metal piece that covers the sim card...
sim card out, use your thumbnail to push down a bit... until the metal comes in contact with the contacts below. you should see that there is now a slight dip in the metal. then slide the sim card in.
Others have suggested a bit of paper between the sim and metal holder.
I tested both ways...
In last attempt I used a quite ammout of paper between metal and sim!
Almost could not close the door.
Already tried 4 different SIM's....
3 from Vodafone... and it's curious but they all look different in the contacts.
And the one from the original operator.
There is a thread to revert back to stock for warranty purpose check the sticky in ROM Development.
Yes, follow the process in the Wiki to return to the OEM settings, SPL and ROM. Then take it back for warrabty. MAKE SURE AND READ THE ENTIRE WIKI; if you miss one part, they will not warranty the phone. As for replacing the sim reader, it's not hard, you just need to follow the teardown and rebuild steps 100%, also in wiki.
Seen exactly the same (100% same syptoms to the letter) problem as this on 2 HTC Diamonds unlocked with olipro software.
Has the Kaiser been unlocked by the olipro kaiser unlocker ?
The 2 Diamonds had to go into service centre as the problem is linked to the block that is flashed during unlocking & mtty, rom flashing & re-running unlocking software done no good.
Mister B said:
Seen exactly the same (100% same syptoms to the letter) problem as this on 2 HTC Diamonds unlocked with olipro software.
Has the Kaiser been unlocked by the olipro kaiser unlocker ?
Click to expand...
Click to collapse
Yes...
I followed the tutorial step by step...
Then, the SIM problems happened...
After that, I tried it again with different hardSPL versions... and a the 6.1 ROM.
Both Portuguese and English version and no luck...
Now the problem is that I can't find the WM 6.0 portuguese ROM from my operator to revert it...
I guess I'll need to replace the reader myself..

Sim Not Detected after Upgrade to Windows Mobile 6.5

Dear All
I have read as many threads as possible in 2-3 hours but was not able to find the solution of my problem Here is what I Did
I wanted Windows Mobile 6.5 on My phone so i downloaded Hard SPL 3.56 & RevRom V8. I flashed hard spl & rom as instructed in post by experienced users.
Everything went fine and Windows 6.5 started working correctly. Then I shut of the phone and Inserted my Sim Card & Memory Card. The Memory Card was detected but the sim card was not detected. So I started reading the guides again & found that Hard SPL 3.56 is for ATT Roms only. So I downloaded the 3.29 Hard SPL and flashed it. With this my sim card was detected but after two minutes it again showed sim card missing. I again restarted the phone and sim card again worked for about two minutes. Then I thought may be its a radio problem so flashed a New Radio which is 1.70.19.09. But to no effect. I also tried another WM 6.5 Rom, this rom again did not detect my sim completely.
By now it was 6.00 in the morning, I desperately needed my phone to work as I am handicapped without it in office. So I read the post about reverting to original rom & spl and downloaded the HTC Hard Spl 1.56 file available, because i did not had the time to go for extraction and all. Then I flashed it and a Shipped Hong Kong WWE Rom 3.34.721.2 with Radio 1.70.19.09. But still my sim was not detected now I really got frustrated and just began to restart my phone I did this approx 3-4 times and suddenly the sim was detected and phone began to work fine. I checked it for about an Hour it was working fine. So I went for a Bath and when I came back the phone was agan showing Sim Card Missing. This time I took my sim card out again and pressed the metal strip that holds the sim card towards the pin very hard and inserted my card again. The sim was detected and the phone working fine while I am writing this post(approx 3 Hours of Working).
Guys Please guide whats could be the problem with my phone and what DID I do wrong. Can my mistake be corrected or have I made a Huge Blunder.
It looks like hardware issue that the contact got loosen up somewhat. What you did (pressing the metal) should help. Other might insert few layers of paper on top of the SIM to make it 'pressed' towards the contact better.
And this thread should not be on ROM development, but on the Kaiser General (mod might want to move this).
Another possibility is: did you do a HR after flashing the ROM? And flash OEM before flashing customer? Once you reverted back to stock ROM, you should do another HR.
I did the Hard Resets all the time as it was mentioned in the guides I followed the guides completely.
Guys Please also suggest which Hard SPL is best for WM 6.5 Rom 3.29 or 3.34.
Both should work. Ask your chef

The SIM card is missing.

I've got :
R 1.71.09.01
G 25.75.40.02
D 3.TPCElite
and TPCElite series V11 MEGA wm6.5 23017
everything was ok till yesterday. now I've got "The SIM card is missing" message. I try another sim cards and it's the same.
on android is the same situation.
what can be wrong?
it's possible that sim card slot is broken?
Yes, possibly a dirty or faulty SIM slot. Give it a good clean and brush it out gently, making sure not to break the cover. If this doesn't fix it, backup your data and hard-reset the phone. If the problem still persists, you'll need to open it up and have a look at the SIM slot connection inside the phone.
There are any news?
I've the same problem.
I've got 1.71.09 Radio abd MyPPC by UltimoJedi version MLs_K3.1 ITA and the card is missing.
The phone is AT&T Tilt P8925.
Can someone help me please?
Thanks in advance.
cleaning sim card slot and hard reset didn't work. now I'll open the phone and look what looks wrong.
ok I fix the problem. when you open the sim slot you will see little silver thing (the full disassembly is no needed) :
I have push it gently and now I don't have any problem now

[Q] g1 help needed no signals

hi
need help with my tmobile-htc g1
i am using it in pakistan....
by mistake i did
factory data reset
and now it
at search networks its giving the error
your sim card does not allow connection to this network
and
then i tryed some radio and spl file......
i donot know what i did and now what should i do
and now there is no signals....
there is a (X) on the signals.......
i attach 2 pic
plzz help me out
Is there a sim card inserted? If so - make sure your phone is unlocked . If it still isnt working - it may be due to one of the cables inside the phone becoming loose - this isnt hard to fix as they are located on the top part of the phone.
yes sim card is there.....
thankx for reply.....
its not cables.....
its working fine befor reset.....
i know the it the software problem......
its radio
spl
or rom......
still have that problem

Categories

Resources