Synchronisation problem - Touch Diamond, MDA Compact IV General

Whenever my HTC Diamond is connected to my pc microsoft activeSync(cable),
the time of diamond is updated to the wrong time which is not the same as the clock in my pc.
Besides that, one thing that really annoys me is that it sychronises automatically which alwiys transfer those unwanted files into my diamond.
Next, afta auto sychronisation, i found some files in my diamond but i cannot locate them my pc. I couldnt find where' are those files in my pc. lol, but i believe da files are from my PC. Is there any way that i could check where did those files come from after synchronisation?
thanks if u could drop by n help =D

Related

mac tweaking

since going off my wizard to a blackjack a year ago, i converted from pc to mac for personal computing. now i'm getting a tilt in a few days and wonder if any mac users can advise on tweaking and upgrading my new gadget. the smartphone i was syncing through The Missing Sync For Windows Mobile. i guess i'm needing a reg hack utility and app installer and such.
please advise. thanks in advance.
I use Missing Sync and it does a great job of transferring data - contacts, calendar, tasks, etc - from the mac to the Tilt. The real challenge is making sure you have CABs to install instead of EXE files. One program I bought was File Juicer (I think by echoone.com) that can extract some CABS but not all. Every so often, I have to borrow a friends PC. Once on the pc, I double click it and it extracts the CAB and puts it in a folder. Then, I just take it out and put it on a USB disk and transfer it over to the mac...and then just upload it to my phone via bluetooth.
Good luck!

OBEX File transfer not supported

hi,
I am using Ubuntu 7.10 and I wanted to do OBEX file transfer through bluetooth by accessing my HTC S730 drive (I am able to do in my old Nokia 6280). However, I failed to do so. Do HTC S730 does not provie OBEX file transfer? or, is there any other way? I will hoping your warm reply. Thanks
OBEX
Do you look close enought?There is a option named OBEX File Transfer in Bluetooth-Options, enabling the Bluetooth-Explorer and share files in specific folder...
You have to take a look into your BT-Settings...and enable incoming beams...and dont ask me...
I dont know too much about it myself but if the phones BT is more up to date than your old phone you might need to update the software you are using to push?
Dont think Nokia runs WM so it might have functioned a little differently in their OS...
didn't read any of the posts:
http://msdn2.microsoft.com/en-us/library/aa916361.aspx
does this help?
I'll length my post.
bigflavor said:
didn't read any of the posts:
http://msdn2.microsoft.com/en-us/library/aa916361.aspx
does this help?
Click to expand...
Click to collapse
The value on the registry of my phone is 1. BTW, I'm using Ubuntu 7.10 and I am having difficulty on accessing my HTC S730 drive through my computer. But I am able to do same thing to my older Nokia phone. So my query is whether such feature is supported by WM6 or not? If my question is not clear, I will elaborate it further. Thanks for the reply.
What do you want to do?
What is it that you want to do? Browse the files on your S730 using Bluetooth? Send/Recieve specific files?
Since it is Linux and not Windows the phone might not be syncing properly, or might not be set up to browes the way your after through blue tooth alone...

Alittle help please :D

Hey, i just got my HTC Touch Diamond yesterday and i'm already loving it. Well i was looking around to improve it even more and found a couple of things like the tweaks and stuff but how would i go and put them on my phone? like .CAB files, Gsen, Diamond TF3D Config, lightsaber, and disabling 3G and... w/e that other one was that connects to internet other then wifi. Thank you if someone could answer my questions
Easiest would be to copy them via activesync / Mobile Device center, or just connecting the Diamond as a Storage device. Just connect the USB cable to your PC.
So i pretty much just drag and drop them into a folder of my chose and it'll work? Also do i do the same with tomtom7 application and maps?
hmm.. I did what you said and i just put the unzipped files into the harddrive in my program files but it didn't work i tried opening setup but it's and opera file.
on another not where can i get the cab file for no 3G ?

Hope right area, how do I install CAB to phone

Well, just when i think I have things figured out. If a cab is right for my phone, how do I get it onto the phone. Can I do it by the USB hooking it up to my Desktop and then copy and paste into the phone from the desktop? How do I then look at the phone and see if that cab is really there and launch it??
I have a file that tells me it's a CAB file to launch the BTAG that activates the Bluetooth settings and Voice Mail 1.6. It is from a cooked ROM and I only want this one CAB....
Thanks
beachinmoney said:
Well, just when i think I have things figured out. If a cab is right for my phone, how do I get it onto the phone. Can I do it by the USB hooking it up to my Desktop and then copy and paste into the phone from the desktop? How do I then look at the phone and see if that cab is really there and launch it??
I have a file that tells me it's a CAB file to launch the BTAG that activates the Bluetooth settings and Voice Mail 1.6. It is from a cooked ROM and I only want this one CAB....
Thanks
Click to expand...
Click to collapse
Just put the .cab in intern memory or your storage card. Launch it (by clicking on it) via File Explorer.
beachinmoney said:
Well, just when i think I have things figured out. If a cab is right for my phone, how do I get it onto the phone. Can I do it by the USB hooking it up to my Desktop and then copy and paste into the phone from the desktop? How do I then look at the phone and see if that cab is really there and launch it??
I have a file that tells me it's a CAB file to launch the BTAG that activates the Bluetooth settings and Voice Mail 1.6. It is from a cooked ROM and I only want this one CAB....
Thanks
Click to expand...
Click to collapse
I dont understand your question... u can install cab-s with file exploer, just run.
wrong topic.
beachinmoney said:
Well, just when i think I have things figured out. If a cab is right for my phone, how do I get it onto the phone. Can I do it by the USB hooking it up to my Desktop and then copy and paste into the phone from the desktop? How do I then look at the phone and see if that cab is really there and launch it??
I have a file that tells me it's a CAB file to launch the BTAG that activates the Bluetooth settings and Voice Mail 1.6. It is from a cooked ROM and I only want this one CAB....
Thanks
Click to expand...
Click to collapse
hmm, the question is ok but not as a new thread, not in dev; how about general - newbies questions?
I really do hope that you don't make it a habit of yours starting new threads for every single question you have, urgent or not
thx for helping him
to finalize: use disk drive mode to get it to your phone via usb (activesync might lead to data conversion), you are able to select the target folder, disconnect, open a file explorer, navigate to your dir containing the cab and click/double click it for installation
depending on the cab it will either be installed (to device mem) or you will be asked where to install it (device mem or sd)
done and best
Mod. edit: CLOSED, answered, duplicate, wrong forum

[Q] Htc Hd7 as a USB drive.... Now What?

I managed to follow the instructions found at knowyourcell.com about turning your HD7 into a USB drive... It will open and read as a drive, but I can't transfer or read anything... Help would be appreciated. I am a noob so please take it easy on me.... What now? How can I open it up?
Instructions:
1. Open Windows Registry Editor by typing regedit in your start menu
2. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB
3. Perform a search for ZuneDriver
1. The search should yield a result similar to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_045E&PID_04EC&MI_00\6&27ffd631&0&0000\Device Parameters\WUDF
4. Click up one level to the Device Parameters key
5. Change ShowInShell from 0 to 1
6. Change PortableDeviceNameSpaceExcludeFromShell from 1 to 0
7. Change EnableLegacySupport from 0 to 1
8. Change EnableDefaultAutoPlaySupport
Thats what i saw in my Explorer.
Tried to cpy a mp3 file into Music, that did not work.
After a restart of hd7 i came only to the level Storage - no sub folders are visable any more now.
And even with my first attempt i had now folder for movies. May be as i do not have any movie in devices storage?
Now everything works fine.
It did'nt work, as there was a filtransfer by zune on his way to the phone. And even killing zune on pc blocked the storage card.
-So edit the registry as mentioned above
-connect your hd7 via usb to pc
-zune starts now
-kill all zune transfer processes
-kill zune
-go to your windows explorer
-you can copy and past media files now.
unfortunaly the office hub is not visable by this procedure.
But i think we are not far away do find out in very near future.
nice! thanks for this. it works.
Sweet!! Got it to work!! Thanks for the help HUMS... Now what? Is there any way to mod up a Ringtone folder? I tried putting in a WMA ringtone and added the folder but no dice... Any suggestions?
great. it works... thanx!
z31k said:
Sweet!! Got it to work!! Thanks for the help HUMS... Now what? Is there any way to mod up a Ringtone folder? I tried putting in a WMA ringtone and added the folder but no dice... Any suggestions?
Click to expand...
Click to collapse
sorry m8 - no idea.
For the moment only copy and paste available for media data.
As every program has its own hub.
Hi all, I'm getting a little frustrated with my HTC HD7. I installed Zune, but it wouldn't recognize my phone (it keeps saying "connect device") and I changed the registry as mentioned above also but whenever I plug the phone in, nothing happens and it changed all the registry values back to what it was before. Also the computer keeps failing to install the phone. Anyone with any helpful info help please? thanks.
-on a side note, i'm running windows vista
hungboii said:
Hi all, I'm getting a little frustrated with my HTC HD7. I installed Zune, but it wouldn't recognize my phone (it keeps saying "connect device") and I changed the registry as mentioned above also but whenever I plug the phone in, nothing happens and it changed all the registry values back to what it was before. Also the computer keeps failing to install the phone. Anyone with any helpful info help please? thanks.
-on a side note, i'm running windows vista
Click to expand...
Click to collapse
have you checked your USB cable or your USB port on PC?
hums said:
have you checked your USB cable or your USB port on PC?[/QUO
Yes I have; I have 6 USB ports and tried all of them. My wife's iphone and my HTC HD2 connects perfectly to the computer. When I plug in the HD7 however, it takes a charge, and windows will try to install it, then says "installation failed" and thats it. I wonder if its problem with vista, with everyone that is successful at connecting their devices, anyone on vista?
Click to expand...
Click to collapse
I'm running windows XP...
What is the point to copy media files to your phone via rather complicated way if you can do it simply by the Zune?
Not that simple
homer.web said:
What is the point to copy media files to your phone via rather complicated way if you can do it simply by the Zune?
Click to expand...
Click to collapse
Sorry but really is not that simple with zune or may be we the users can not understand how to copy folders with zune so can you tell us how simple it is .
Yellowarmadillo said:
Sorry but really is not that simple with zune or may be we the users can not understand how to copy folders with zune so can you tell us how simple it is .
Click to expand...
Click to collapse
OK. Lets split it to two issues:
1. you want to copy media files (Music, video, photos) to and from your phone
Use mouse and drag and drop what you want to sync with your phone. Its so simple.
2. you want to copy any other types of files to and from your phone
Its pointless, because files will NOT be vissible to WP7 and if you want to move files from A to B, than use what is more appropriate and designed for this purpose, like this: http://en.wikipedia.org/wiki/USB_flash_drive#Uses
homer.web said:
OK. Lets split it to two issues:
1. you want to copy media files (Music, video, photos) to and from your phone
Use mouse and drag and drop what you want to sync with your phone. Its so simple.
2. you want to copy any other types fo files to and from your phone
Its pointless, because files will NOT be vissible to WP7 and if you want to move files from A to B, than use what is more appropriate and designed for this purpose, like this: http://en.wikipedia.org/wiki/USB_flash_drive#Uses
Click to expand...
Click to collapse
homer.web. He speaks the Truth.
homer.web said:
What is the point to copy media files to your phone via rather complicated way if you can do it simply by the Zune?
Click to expand...
Click to collapse
I wanted to try this method because zune was in no way connecting to my hd7. I found the problem though. its my operating system. i plugged it into my laptop running windows 7 and it connected perfectly.
Did the required registry edits but unable to view any folders inside the Storage device on the computer, both computer & zune detects the phone though. Need to transfer a .cab file for installation of Satguide.
Would be great, except for the fact that wp7 doesn't use .cab files, only .xap files.
Sent from my HD7 using XDA Windows Phone 7 App
devinwy83 said:
Would be great, except for the fact that wp7 doesn't use .cab files, only .xap files.
Sent from my HD7 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Wow! thats sad, so is there anything that we can do get it to read .cab files
no there isnt
wp7 isnt simular to windows mobile 6.5

Categories

Resources