I read alot, but thought i'd post. I purchased a like new ATT Treo 750 (Locked) and was going to go somewhere and have it unlocked, I get on here and unlocked it following Summiter's steps here: http://forum.xda-developers.com/showthread.php?t=335661 and then installed the WM6.1 (Rom is here: http://rs86.rapidshare.com/files/97839859/Treo750_OS5_2_19199WWE_STD.rar) Standard rom using the KaiserCustomRUU.exe and man, it is awesome.
The Treo is up and running with WM6.1 on T-Mobile and everything works, even the data connection automatically is configured.... Phone is still branded ATT and still has the built-in crap for ATT .. haven't gone that far, but hey, it works great, a few extra icons, I can live with...
This site is great, and as from reading ALOT of posts, I must say if your looking to unlock or upgrade then do what most people say -- SEARCH & READ -- instead of waiting for someone to hold your hand ...
Any how, saved me $40 from unlocking so I have to donate to xda now
To all ... keep up the good work, especially the ones who take the time to write the step by steps (er..hrmm... cough .."Summiter"..cough) .. You ppl need to appreciate it! ..
Keep it up guys!!
You have 6.1 with AT&T stuff in it? I did not know there was a 6.1 with AT&T stuff in it, are you sure it's MW6.1?
yessir ...
software version treo750-2.25-att
firmware 1.16
win mobile pro 6.1
I didn't unbrand it or anything, i was jus trying to unlock it, and kept crashing at the 2nd step, so i said screw it and just poped in my tmo sim and it worked ... never flashed the radio since i had full bars (sacramento, ca) and them just flashed the 6.1 cooked rom on it afterwards.. and boom! it werks fine ...
but yea, it finally rebooted a 3rd time and proceeded to install the att junk...
ok, installed a unbranded WM6 rom over the 6.1 and no more ATT junk, then installed the WM6.1 rom again and now is clean 6.1 install ...
Ok, now I get it
HI, can you please expalin a little more how to do this.....is this KAISER a program??
I want to upgrade to 6.1 but I'm just afraid to damage my Treo 750.
Is there a step by step tutorial??
Thanks!
PS: I'm already downloading the ROM
I too have downloaded the rom and am ready for or looking for the instructions on reflashing my unlocked palm treo 750. Thanks
Euhm the Kaiser stands for the HTC Tytn 2, so you have tytn2 rom on your treo 750?
cablemel said:
ok, installed a unbranded WM6 rom over the 6.1 and no more ATT junk, then installed the WM6.1 rom again and now is clean 6.1 install ...
Click to expand...
Click to collapse
Can you please post your update or send me an email with those 2 updates? Many thanks,
Sam
Is there any cooked ROM for Treo 750?
palm treo 650
i have a palm treo 650 and i was wondering where can i get some apps or software thanx.
mr.play said:
i have a palm treo 650 and i was wondering where can i get some apps or software thanx.
Click to expand...
Click to collapse
Not here. Here we talk about windows mobile based Treos. Btw, Treo 650 rocks!
This ROM compatible for Treo 750v?
Sorry for my english, i my from Brazil
cablemel said:
ok, installed a unbranded WM6 rom over the 6.1 and no more ATT junk, then installed the WM6.1 rom again and now is clean 6.1 install ...
Click to expand...
Click to collapse
Hi, where did you find the unbranded 6.0 rom for your treo? I have the official 6.0 updated WM6.0 rom. I too use T-Mobile and would like to get the AT&T crap off my phone....Thanks for the help!
Do you need to unlock your locked phone to put on the att rom WM6.1 on an att branded phone? I have ATT service and wanted to try WM6.1. Currently i have WM6.
Thanks
Unlocker Application
Where is a link to download the unlocker application for the Treo 750? I did find the link to download the WM6.1 OS rar, but not the unlocker application.
Related
Anyone have an original shipped Vodafone ROM? Upgraded to the Cingular release and wanting to revert back, didn't see it posted in the wiki or FTP.
I'd like to do the same thing actually. I think the Cingular ROM has made my 750 a little unstable. Either that or Cingular's doing stuff to the network in my area and it's affecting my phone. I think it's the Cingular ROM though.
I too am seeing funny things going on with the Cingular ROM installed. I want to go back to the Voda ROM (original version).
I have search MANY forums all over the world and cannot find the original Voda ROM for this phone.
Whoever gets it, please let me know so I can get it.
Thanks
Did anybody find it?
You will need to wait until Vodafone releases an update for the Treo 750v before you can restore their ROM.
I have a original Vodafone ROM, well its unlocked but I don't know how to copy it, if someone will guide me through it, I wouldn't giving it up to everyone.
Vodafone ROM please?
Hi,
I just bought a Used 750v - it was originally the Vodafone 750v but it looks like the Cingular ROM has been installed on it.
I am looking to Restore it back to the Factory Default.
thanks!
I hear new Vodafone rom for the 750v will be out at the end of the month (End of Jan), this will also be of a higher AKU... Still no HSDPA support, that comes in March/April time with another update....
doedoe said:
I hear new Vodafone rom for the 750v will be out at the end of the month (End of Jan), this will also be of a higher AKU... Still no HSDPA support, that comes in March/April time with another update....
Click to expand...
Click to collapse
thanks for the update doedoe!
if i paralleled my 750v how can I get ROM updates? The 750v is not offered in my country [Philippines].
bnycastro said:
if i paralleled my 750v how can I get ROM updates? The 750v is not offered in my country [Philippines].
Click to expand...
Click to collapse
I guess keep an eye out her or other forums. I am guessing a Palm will act to get them removed from the site if they are hosted here.
psxp said:
I guess keep an eye out her or other forums. I am guessing a Palm will act to get them removed from the site if they are hosted here.
Click to expand...
Click to collapse
Don't worry, a new release is imminent now. (without HSDPA though)
where did you get this info???
bnycastro said:
where did you get this info???
Click to expand...
Click to collapse
You see the build I am running?
Ok... so you appear to have WM5 AKU 2.6 on your 750v. Maybe the ROM is coming hopefully sooner than later.
Wiz said:
You see the build I am running?
Click to expand...
Click to collapse
So if you already have the new build, why don't you share it, or tell us when to expect the new rom? I can't wait for a new rom, I hope it fixes some nasty bugs on my treo..
I'd rather have a Cingular ROM than a Vodafone ROM with AKU2.6...AKU2.3 and AKU2.6 aren't really different at all. But an AKU3.x ROM, now we're talkin...
I'd rather have a Voda ROM since I don't want/need the Cingular customizations. I also don't use MSN messenger so that one is a non-issue.
Hi there,
Have spotted that Calico had an original French-ROM 750v.
Calico, if it remained untouched, are you considering exchanging it with my original English-ROM version? Where are you based?
Cheers, Dom
Oops sorry... wrong post...
I have a few questions in regards to the Treo 750 WM6 rom
Will the AT&T rom work within Australia?
If no why not?
What skillsets are required to make your own rom?
I sincerely thank you for any help.
This should be in the technical discussion. No need for a new thread.
Moderator, can you delete this thread, please?
Hi snowdonx, welcome to xda-dev.
I don't see why it wouldn't work in Australia - but I can't say for sure so someone else will have to give you a definitive answer there.
As far as making your own ROMs - everything you need to know can be learned here. I'd suggest reading some of the newer guides in the Hermes forum to get started.
To give you a head start - there's a couple basic things to be aware of. First, newer devices like the Hermes and Treo 750 will not allow flashing of custom ROMs, or more correctly, ROMs that aren't signed with a carrier or manufacturer certificate. The bootloader (SPL) enforces this. So the first step in getting custom ROMs on a device is putting in place a modified bootloader that allows unsinged ROMs. The number of folks who can do this is very limited compared to the number of folks who can build customer ROMs.
Creating the ROMs, in a nutshell, involves dumping an existing ROM using tools available here, making modifications, rebuilding the ROM, and flashing.
Hope you enjoy your stay here. =)
snowdonx said:
I have a few questions in regards to the Treo 750 WM6 rom
Will the AT&T rom work within Australia?
If no why not?
What skillsets are required to make your own rom?
I sincerely thank you for any help.
Click to expand...
Click to collapse
Has anyone with a Treo 750 successfully used the WM6 AT&T ROM within Australia?
summiter said:
Hi snowdonx, welcome to xda-dev.
I don't see why it wouldn't work in Australia - but I can't say for sure so someone else will have to give you a definitive answer there.
Click to expand...
Click to collapse
Why would you forsee it to work?
AUS
snowdonx said:
Has anyone with a Treo 750 successfully used the WM6 AT&T ROM within Australia?
Click to expand...
Click to collapse
Yup. Works a treat on Telstra and if you read through the thread you will see it works on Optus and Vodafone too.
and Three too
Does it work on the NextG network on Telstra? i'm pretty sure it should since HSDPA is included on the Treo ROM Upgrade... and how do I get the telstra software and settings onto the treo as well? Do I need to unlock the sim at all?
amberzombie said:
and Three too
Click to expand...
Click to collapse
I second that.
snowdonx said:
Why would you forsee it to work?
Click to expand...
Click to collapse
wow.......
Hi, I'm in Aus aswell and thinking of getting an unlocked 750V from ebay......just a question about how the IMEI is changed after upgrading to the UNOFFICIAL WM6, what will happen if the OFFICIAL WM6 rom becomes available...are we able to upgrade without problems....i know this has been asked before on other threads but no one seems to know the answer......i guess those that have upgraded to the leaked roms will find out when they try to upgrade the official rom when it becomes available......
Just try the official WM6 ROM in the upload dir on the ftp:
uploads/Treo 750Cheetah/WM6 ROM Cheetah Treo 750v
Download the NBH, put it on an empty memory card and insert it into the Treo
Push the sidebutton (below the volume keys), the right softkey below the display and reset with the stylus (all together) and the bootloader starts and you can upgrade the treo to WM6 with HSDPA enabled.
Cheers mate!
thanks, also what are the main differences between 750 and 750v models?.....apart from the word 'vodafone' stamped on the actual phone.....
charliecharlie said:
Just try the official WM6 ROM in the upload dir on the ftp:
uploads/Treo 750Cheetah/WM6 ROM Cheetah Treo 750v
Click to expand...
Click to collapse
Can you give a link of this ftp?
ftp://xda:[email protected]
irv777 said:
thanks, also what are the main differences between 750 and 750v models?.....apart from the word 'vodafone' stamped on the actual phone.....
Click to expand...
Click to collapse
the main difference is that the Vodafone firmware has Vodafone presets and Vodafone theme next to the standard Windows themes and settings. (Customisation for Vodafone). In the original WM5 rom, there was no messenger available. In WM6 the Live Messenger is back ! Other than that, I don't think there are other differences.
this ROM appears to come from Vodafone (AU)
CE OS: 5.2.1239 (Build 17746.0.2.4)
Firmware version: 1.47.02.00
so far so good...
So it's almost the same, just Firmware version on AT&T is newer: 1.47.02.00 VS Firmware version: 1.47.25.00
yes, nothing unexpected. (баян)
SecureGSM
Aight. Thanks for the info.
i've got a really short question, will the wm6 roms work on a spv m1000? i'm not quite sure if all the different devices are all the same, so if i can install a wm6 rom on my spv m1000. it is a himalaya ph10a device...
it should work
yes,
mine was spv m1000 too.
Mine too, I use Sheckars WM6....works like a charm...and dont forget to install the smsfix
Greets Roel
Hello Drshoe
Where to go to get Sheckar wm6 rom ?
Thanks
2th sticky post in the forum
drakkard said:
Hello Drshoe
Where to go to get Sheckar wm6 rom ?
Thanks
Click to expand...
Click to collapse
http://www.4shared.com/file/29527529/7cbc227c/C_ShekharAKU70cR40P24_public.html
Argh....
I have tried this ROM but as all I have tried I got the same problem.
ActiveSync 4.5 doesn't work with my SPV M1000...
If I downgrade to the original ROM, everything is ok.
My Computer say "unrecognize USB drive..."
Any Idea
DraKKarD
I use the WM6 TofClock Rom and it works good on orange SPV M1000.
spv m1000 rom ?
hi all and thanx for all you guys for providing info on upgrading roms for the SPV M1000, any way my question is that i love using my spv m100 even tho i have the latest MDA touch PDA , but its screen is to small tho but the m1000 is a good bit of kit with good size screen, and so im wondering if i change my rom from its original state from mobile 2003 second edition to any of the roms listed in this forum, can i still use my Tom software navigator 6 along with think free navi gps, cus it works ok with 2003 edition just fine but i need to know if any of the roms stated will run it ok, also i have found that a lot of pocket pc software does not work on my device infact about 90%, so would any of these roms help? thanx to any one who can help us :>
i think its working..because many have asked for Backlight fixes after flashing WM6 and WM6.1
regarding the Programs not working...its because they were ment for WM2003..now it Wm 6.1..u shouldnt worry about getting softwares for WM 6.1 because almost all the softwares are for WM5 , WM6 , WM 6.1
Hope this helps..
hi totally new to this just got my m1000 and got reading this post Ive downloaded the file how do i go about installing this on my m1000? sorry to be asking dumb questions but as stated I'm totally new this
I was just wondering how can I install wm 6.1 on my treo 750 unbranded version. I don't want to install unnecessary olipro SPL/IPL as mine is unbranded.
Also i need to be sure that i can put back official WM 6 back after WM 6.1
Please suggest....
Olipro is required for 6.1. It does more than SIM unlock, it also disables ROM signing verification, that prevents you from running non-official ROMs.
There is (currently) no official 6.1 ROM for the Treo. There may never be, but there hasn't been a firm announcement one way or the other.
You can always revert to 6.0 by running one of the standard desktop updaters.
Will it also do away with the Olipro SPL/IPL etc-meaningto say will it roll back EVERYTHING
startngate said:
You can always revert to 6.0 by running one of the standard desktop updaters.
Click to expand...
Click to collapse
Yes it will.
I got my 750 ipl/spl updated using the Olipro.. how do I get 6.1 on it now?
I see pieces of information regarding the 6.1 update, but no links to the files needed and what not..
just lookin for a little assistance =P.. I search for Olipro and see it in all sorts of other threads.. is this device specific? or will any version work on any device?
Hi,
I got a unlock T-mobile MDA Vario with a WM5 i wanted to upgrade it to WM6 in Dutch version, with the newest Rom etc etc..
This is the Extended Image version that i use now: 2.21.2.108
Where can i find the Dutch T-mobile version WM6 ?
And how can i upgrade it?
wiki......
Already Fixed !!
OK
Onderbroekie said:
Already Fixed !!
Click to expand...
Click to collapse
ok lets see, with your info updated on your signature we can make too much...
On this forum... enter on a thread called "a little tutorial" download everything you need ... Button ROM, wizard Love, lokywiz, your Rom in DUTCH and so important... an original ROM like tmo 2.26 or Tmo 3.08 and the radio of your wish ok?
You have a G3 wizard so the process will be in that thread... if you dont have or understand something ask there or here, dont do anything untill you get all the info and tools ok? read a lot and ask so much more...
to Dutch I recomend you the New Wizard ROM wm6.1 by GULLUM diamond with throttlelauncher in 13 languajes... we will keep in touch see you soon.