Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently
I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx
Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks
Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.
Same problem here, have tried everything
Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?
since day 1 my keyboard did not show predict text ? anyone can help me ?
I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.
I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?
Related
I'd like to use the HTC Touch keyboard on my Tilt for the times that I don't want to slide out the keyboard, but installing it seems to break the autocorrect feature when I am using the hardware keyboard. I see a few other people mentioning this in various threads, but I have yet to see any mention of a solution to this problem. I've tried all sorts of combinations of enabling and disabling autocorrect and various xt9 features, but the only way I can get autocorrect back is by uninstalling the HTC Touch keyboard.
By autocorrect, I'm referring to the ability to type in "il" and have it automatically change to "I'll"
Hi - did anybody find a solution to this? I've been searching high and low!
I'm in exactly the same boat - I love HTC keypad as it really helps me use the Kaiser one-handed, but I really miss the auto-correct on the hardware keyboard.
Is there a version of this SIP that doesn't break auto-correct?
I tried the HTC phonepad, but just couldn't get used to it after using the newer Keypad.
I would love to have a good T9 style SIP, but also have autocorrect on the hardware keyboard......anybody that can help?
Thanks!
I'd noticed that too, quite annoying as the touch keypad is so useful.
6thElement said:
I'd noticed that too, quite annoying as the touch keypad is so useful.
Click to expand...
Click to collapse
I too found the same issues yet I loved the T9 input using the touch pad. I removed the xT9 one and installed this one instead.
You still get T9 and it works fast too. The internal keyboard auto correct also works with it too.
Is also made by HTC but can't remember where I found it. May have been on here before or recently.
I've been earching for a solution to this as well for months now. The autocomplete that XT9 disables is part of wm6 which it calls "word completion." When XT9 is installed via htc keypad, word completion ceases to work along with the feature that auto-fills contacts as you start to type a new SMS.
Thanks for posting that pkonepad cab, but unfortunately.that' the sip that radatia mentioned above. The buttons on the new HTC touch phonepad are bigger and easier to use.
What we really need is someone here that knows some programming to somehow alter the touch phonepad so that xt9 can be toggled on and off (without a registry change and restart), or better yet somehow change it to use a T9 like the phonepad's instead of xt9...
I have exact same problem. I love the htc virtual keyboard because became useful. However once I installed it, the hardware keyboard word completion no longer work I need that too because I use it.
I have another question, do anyone know if I can make the default windows word completion to auto select the top most word suggested list so I can just enter space bar to select it. Now I always have to use down key to select the word 1st. Not efficient.
Just wanted to bump this topic. There have got to be others out there who share our frustration... and someone who can put an end to it!
I've given up on the HTC Keypad, much as I like it and it making the device usable one-handed.
Have moved onto the PocketCM Keyboard as my preferred SIP just so that I can still keep word completion when using the hardware keyboard.
Hope that someone posts here if a solution is eventually found......
oh man!
I'm the opposite.. how I wish the hardware keyboard is not auto correct enabled when I use it.
I've tried dis-abling the auto correct etc.. dun seem to work..
now using Resco keyboard..
it's the next best thing, but kinda defeats the purpose of getting the tytn II in the first place.
Yes the touch keyboard has many issues when used on kaiser. i can't get autocomplete to work with the hardware keyboard either unfortunately.
I do know that "multiword completion" in the xt9 settings or whatever is a bad thing and causes other problems, so i uncheck that. But, still can't figure out how to get autocomplete to work.
I spent a lot of time searching and installing/uninstalling these things to try and find a perfect mix, no luck though. It's still QUITE usable for me, but i would like auto complete for hardware keyboard, though, i dont think i'd use it as i type realy fast anyways with it.
It's quite hard to justify buying a keyboard when we are able to install a free one that *almost* does what we want! pcmkeyboard with iphone buttons and XL touch skin is good, but i am realy starting to like xt9.
:-( i have this problem now and love the keyboard...
I love (so far) my HTC Diamond but there is one pretty annoying problem. It seems I cannot get word suggestions while typing and this is for any keyboard type.
Any ideas?
Same problem in the IPAQ 614c
I am having the same problem on my IPAQ 614c. I installed this file to disable to XT9 option but it did not help. It may work for you. I would love to get an answer to my problem. Many thanks.
Jay
Could you please post a link to the discussion where this file is described?
Have you played around with the T9 settings?
Start/settings/input/ (check the word completion tab here and choose your options)
Go back to unput method tab
Have compact Qwerty in the window/Options/T9 settings
unfortunately this doesn't work.
keyboard
The best is TouchPal 3.0
correction, I'm speaking about default WM keyboard not about HTC one.
Ok, do you have a Word Completion tab in your input settings?
If so, which options have you chosen?
I have tick Suggest word when entering text
Suggest after entering 4 letters
Suggest 4 words
Tick in Add space after word
Tick in Enable Auto Correct.
I'm sorry, I was wrong, I just tried this out myself, and mine isn't working either. I've never used the normal keyboard before, as it's so small, but it seems like having the Touch keyboards stops that word suggestion happening in normal keyboard. My apologies.
There seems to be a solution to this problem here: PocketCM Keyboard. Good luck! I have tried it and it works great. Awesome!
This Should Work
Bug on my virtual phone keyboard and compact qwerty keyboard : impossible to type letters. Only numbers are displayed. My full qwerty keyboard works.
I had install and uninstall many keyboard like PCM, touchpal etc.
Thanks a lot !
Fafou
My case is worst then yours . All three HTC keyboards are numerics only. But the regular WM SIPs works fine.
Anyone got an answer to that?
Have you tried a different rom? might help...
disable the " Turn on one touch" option and it works again.
Got the same bug, and the only fix is to disable this option.
But you can do a soft reset and enable this option again and it should work normal again.
Havent figued out the reason of this bug yet, but i think it has something to do with editing the contacts.
btw, which hardspl version do you use?
slicker said:
Have you tried a different rom? might help...
Click to expand...
Click to collapse
I think its a bug on the 1.93 wwe roms, got it on every wwe rom except swifts 5.0. But 5.6 got this bug too.
I get the same problem if i have PCM player keyboard installed.
uninstalled it and a reboot fixes it... but i love PCM keyboard.
I'm on 1.37 Nor btw.
I'm using stock 1.93 ROM. full QWERTY was working for 2 week... till 2 days ago. I have reverse all the tweaks I made for the pass few days and it didn't help.
I think I'll try install a PCM trial and see if that helps.
Keyboard now working is a big issue. I hope HTC will publish a hotfix soon.
Installed PCM... all the HTC SIP still not functioning. But the hell with them... I like PCM better now.
Hope some one finds a fix. I want both PCM keyboard and the orignal ones.
Lobo13 said:
I have found a solution. Change this in the registry:
Code:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409
"Layout Text"="eT9 IME"
"Ime File"="\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
"(Default)"="XT9"
[/quote]
Works after a reboot on diamond :)
Click to expand...
Click to collapse
is there a fix to allow my phone styled keypad and compact qwerty to write letters instead of numbers. Even if the letters are selected. This makes it extemely hard to write texts when one the move as i have to use the full qwerty which now does not wish to return to letters, after inserting a new contact!
so far i have tried swithcing keyboards back and forth and a soft reset. is there a CAB to update this keyboard or anything like that.
I have tried searching but the search function returns pretty much every post with the word keyboard in it which isnt too handy!
cheers
Aaron Neal
i've had that problem with the diamond keyboard installed on my touch pro, and all i did was switch to the standard windows keyboard, and then back to the phonepad and it works fine. if you need to, you could reinstall the diamond keyboard, its on here somewhere in this forum.
ou2mame said:
i've had that problem with the diamond keyboard installed on my touch pro, and all i did was switch to the standard windows keyboard, and then back to the phonepad and it works fine. if you need to, you could reinstall the diamond keyboard, its on here somewhere in this forum.
Click to expand...
Click to collapse
i have been looking, but like i said i get every single return of 'keyboard' in the search!
I have recently updated to a fairly stripped down ROM (it only included the bog standard Keyboard thts way too small to use with finger).
I really like the HTC Keypad as it's easy as hell to use - but I've just tried to install it by installing EZinput and its showing about half the proper resolution - I think its QVGA. This has been a problem now for about 3-4 days and I absolutely despise having to use a QWERTY keypad. Currently got SPB keyboard on it (tried Resco too but its rubbish).
Can anyone upload their original diamond keypad or even an installation cab with all the VGA keyboards in? (qwerty, phone keypad etc).
Would be a great help!
Thanks guys.
http://forum.xda-developers.com/showthread.php?t=490587/
download the keyboard of your choice (with arrow or without arrow)
That should work for you
does this have a keypad as in standard with * and # keys?
1 2 3
4 5 6
7 8 9
* 0 #
That style? Thats the one im looking for!
Thanks btw! didnt even know that site existed
This is the alternative if you want it in a keypad format
http://forum.xda-developers.com/showthread.php?t=426281
The difference between that and the previous one is there is no XT9 which is similar to T9 but with word prediction. Hope this helps
You my friend -
are the biggest legend in the world. Thats the stock VGA diamond one - and thats what I wanted!
Thank you so much.
p.s the damn no-arrows diamond2 one wont work... any idea why?
it wont let me select it :-(
Try this one: http://www.everythingdiamond.info/downloads/Savage25rcracer_TD2_K_NA.cab
That's the one that I cant select! :-(
Think I'll just need to change ROMs again.
Woooo. :-(
Just tried to install that keypad linked - wont work. Also wont uninstall.
The one with the arrows works but its damn annoying.