Dear bros,
How can I reset the call timer for All calls as I understand that there is a reset button for recent cellular call that I can reset but not the for All calls ..Pls advise me..
brans0n said:
Dear bros,
How can I reset the call timer for All calls as I understand that there is a reset button for recent cellular call that I can reset but not the for All calls ..Pls advise me..
Click to expand...
Click to collapse
..form my point of view: When installing a radio rom the counter should be set to "0"...
Dont understand bro..what is radio rom??
brans0n said:
Dont understand bro..what is radio rom??
Click to expand...
Click to collapse
Radio: The radio stack is responsible for the phone functionality of the device. This includes GPRS, GSM, UMTS, and GPS operations as well as camera functionality. The version you use depends on who your carrier is as users have reported versions working better on one carrier than the other. The wiki pages contain the latest versions available to download and install.
cyron_at said:
Radio: The radio stack is responsible for the phone functionality of the device. This includes GPRS, GSM, UMTS, and GPS operations as well as camera functionality. The version you use depends on who your carrier is as users have reported versions working better on one carrier than the other. The wiki pages contain the latest versions available to download and install.
Click to expand...
Click to collapse
Wow too deep for me to understand bro..btw thank u for ya kind advise.
Found this
There are a couple of ways: there quite easy but require a bit of knowhow:
http://forum.xda-developers.com/showthread.php?t=298034
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've not tested them on the Diamond.
Ta
Dave
Related
Problem is that if I play an mp3 or a video there is no sound and I also don't get any sounds from my TomTom when in use
Any ideas folks?
Thanks
Inishmore said:
Problem is that if I play an mp3 or a video there is no sound and I also don't get any sounds from my TomTom when in use
Any ideas folks?
Thanks
Click to expand...
Click to collapse
Flash a compatable radio for your ROM. (http://forum.xda-developers.com/showthread.php?t=349375) / http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Thanks
Dave
checking the device info it says I already have 1.27.15.32 which appears as the latest on the list?
btw I'm in the UK on the 3 network
Inishmore said:
checking the device info it says I already have 1.27.15.32 which appears as the latest on the list?
btw I'm in the UK on the 3 network
Click to expand...
Click to collapse
What version of Windows / ROM are you using?
Ta
Dave
WM6.0
Rom version 2.50.771.0 WWE
Rom date 03/10/08
Radio version 1.27.15.32
Protocol version 22.51.88.13W
anyone? pls?
I've never seen a 2(point)50(point)771 Build before in my life. Now according to Dave's Link above. If you mistyped and its a 25(point)etc etc ROM its actually a WM6.1 ROM and 1.27. Radios do NOT work with WM6.1
Inishmore said:
anyone? pls?
Click to expand...
Click to collapse
does your camera work?
edit: yes Jimmy is correct thanks for looking jimmy we posted at the same time
just checked and it's 2.50.771.0 WWE so my original post on specs is right.
I assume it's a custom rom for 3 (UK)........camera works - can take pictures fine
Go into Start, Settings, About and it will tell you if your using WM6.1 or not. If you are using WM6.1 you will have to flash a new Radio.
Ta
Dave
Using WM6 Professional CE OS 5.2.1620 (Buld 18125.0.4.2)
OK Then Is the Phone And Device Volume Down?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For some reason when I launch the music player it drops the volume to 0.......I can raise it and there is sound
Apologies for the daft problem thread people and thnx JimmyMcGee
installed the advanced config, htc flow editor, MS comact .net framework. selected the performance upgrades 1,2,3,4.....
now my phone keeps freeszing up a lot when I am swithing between the contacts, text, email , settings tab.....please help as it's so annoyiing and half the time I have to do a dsoft reset....
I thought this was a problem with my first FUZE, so returned it got a new one and same thing happens on the new one....now once in a while the phone just goes black screen on me and have to remove the battery and put it back and turn it on....the soft reset or just trying top tuurn the phone doesn't help either....
I would appricieate any tips, guidance here....
anyone?
yellowducati996 said:
anyone?
Click to expand...
Click to collapse
Atleast try one of the cooked ROMs first, its a common fact that the stock ROMs are pretty poor.
I am new here...would you please guide me to the ROM which works best on the FUZE along with details instructions...never done this before and want ti make sure I don't end up screwing it up thanks for your help!
Did it freez up before you did all the tweaks and performance stuff? maybe some of them are conflicting with each other. Backup all your data and do a hard reset and do all you tweaks with a little time inbetween so you know what one starts giving you problems. Better yet try a custome rom they have all the tweaking done for you basicaly
which one is the latest and greatest ROM that I can use...link please ...
I suggest Kickstart.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FIX
My Fuse Runs Runs Very Fast You need to Get off the Att Bloatware Rom And Flash a Touch pro Rom And make Sure You have Done are the Right Speed ups And Tweeks Also Change your File System Cache Size to 8MB And your System Filter to Cache 131072 and Glyph Cache to 128
I rooted my G1 Tmobile and now it's acting funny in some ways. I don't know if it's an overload of apps (I don't know how to use the 4gb micro sd card inside to free up memory on the phone), or perhaps a step missed along the way (I don't remember doing anything about a radio update), or I picked the wrong OS but I need some help.
-It doesn't always hang up on the first try. It will go back to the home screen but the call is still going now matter how many times I press the end call button.
-Sometimes it will get stuck in landscape mode
- I keep getting the message that I need to turn on the radio and also that I don't have a signal.
I didn't look in the right places for my initial guides and I'm afraid that I'm missing something. I took a screen shot of my system properties. Can someone her tell me where I messed up?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*update* I fixed my radio according to bigballa's post below (thanks) I've attached pics of my other two screens for further suggestions.
what class is your SD card?
try updating your radio?
u have the new radio
the old radio which is suppose to be used with rc33 is the 1.22....radio
Note: RC33 contains a radio update. I chose not to include this in the RC33 update itself, because I personally don't want it re-flashing the radio every time I apply this update. Here (md5: cf8714d273fb0274574d9e3831e11fdd) is a separate update that *just* flashes the radio. You only need to install this update once (unless you happen to flash an nbh at some point in the future, in which case you should re-flash the radio afterwards).
To check if you have the new radio, go into the about phone screen in settings and check the baseband info. It should end with 1.22.14.11
Click to expand...
Click to collapse
this one
http://jf.odiness.com/RC33/RC33radio_update_testkeys.zip
Hello,
i flashed my mobile Vario3 to HTC Tytn II original without Tmobile brands, after this i installed WM 6.5 and everything works fine, but when i wanna make a picture, hte mobiel works a bit and after this, no picture anywhere...
What is this for a problem? what can i do???
And by the way, in the task where is the symbol for Internetconnectivity (G,E,H,3G) ?? see picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope someone has an answer...
searching would bring up the answer most likely..
Change your radio
It's because you are on GPRS, use Advanced Config\Data Connection Enable Legacy GPRS Notification.
ChumleyEX said:
searching would bring up the answer most likely..
Change your radio
Click to expand...
Click to collapse
My english is not the best so i dont know, what i have to search for... i am sorry
and what ist advanced config? Is this a tool i have to load?
and my other question was why i cant make pictures with the cam? the counter works, but no photo...
Prezioso said:
My english is not the best so i dont know, what i have to search for... i am sorry
and what ist advanced config? Is this a tool i have to load?
and my other question was why i cant make pictures with the cam? the counter works, but no photo...
Click to expand...
Click to collapse
Advanced Config is a program cooked in most ROMs
No pictures i'd go with ChumleyEX that you don't have the correct Radio as in 6.1 it's noted in the Flashing for noobs and many other places
I have got this one here in German language...
So i have to load another Radio?
I found the noobs guide, but i read this and i dont know which radio i have to use now... Which radio i have to load? there are so much original 6.1 radios, but i dont know which is the one for me.
Regards and thx
Now i read something here and tried the loader teijak wrote in there, but no working...
Screen mobile says: KAIS130 MFG, SPL-1.0.OliPof, CPLD-8
And Notemake says mistake 260... :-(
Ok i did over microsd...
I putted radio 1.70.19.09 on it, now i see which speed i have in network, but the camera is still not working, so whats wrong?
Needs Hard spl updates?
Regards
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After installing new rom
[ROM/KERNEL][GSM] ♫ Overcome ROM v1.3.0 ♫ Overcome Kernel v2.0.1 ♫ 3/17/2011 i dont have internet icon and it doesnt work, but calls, sms and internet by wifi works well. I dont know what to do! Give me some advices please!!!!!!
have you configure the APN?
ovigt71 said:
have you configure the APN?
Click to expand...
Click to collapse
yes. on previous roms all was working
vxsasha said:
yes. on previous roms all was working
Click to expand...
Click to collapse
are you sure the APN settings are the same like was before? sometimes the new rom doesn't come with the APN stock working, and has to be changed according with carrier settings... better reset your settings, configure again, save them and reboot your tab !
ovigt71 said:
are you sure the APN settings are the same like was before? sometimes the new rom doesn't come with the APN stock working, and has to be changed according with carrier settings... better reset your settings, configure again, save them and reboot your tab !
Click to expand...
Click to collapse
yes you was right, thank you!
no problem man, but remember, if you install Market Enabler......you'll have the same problem....during faking the the chosen provider in order to attend to paid application, all APN it will dissapear from settings, and it will work ONLY the internet one; for MMS will stop working. you'll have to reboot your Tab in order to restore again the functionality of APNs
hi,
i'm having the same problem but didn't made before a configuration and don't work now! Any help?
Regards
lubby said:
hi,
i'm having the same problem but didn't made before a configuration and don't work now! Any help?
Regards
Click to expand...
Click to collapse
have you tried the above solution? isn't worked for you?
ovigt71 said:
have you tried the above solution? isn't worked for you?
Click to expand...
Click to collapse
the problem can be solved by buying new simcard, or just take somebodies to see if this will work.