It on the web site!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://www.my-xda.com
cool!!!
Great News!
Great news!
Have been waiting for this release for donkey years!
This is good news. Can the client work on networks other than that of O2? Can you put a link to download it here? I have a qtek 2020i and would like to use the program if I can.
Thanks,
Gilbert
Gilbert said:
This is good news. Can the client work on networks other than that of O2? Can you put a link to download it here? I have a qtek 2020i and would like to use the program if I can.
Thanks,
Gilbert
Click to expand...
Click to collapse
Should be able too. Havent tried on XDAIIi though, maybe later tonite. My previous experience with XDAII Blackberry was possible using Singtel (Singapore) mobile network. The only sticky thing was that the O2 Official ROM for BB must be used. Otherwise, even installing the BB client on other ROM version of XDAIIi or QTEK 2020i is of no use.
Gilbert said:
This is good news. Can the client work on networks other than that of O2? Can you put a link to download it here? I have a qtek 2020i and would like to use the program if I can.
Thanks,
Gilbert
Click to expand...
Click to collapse
http://www.my-xda.com/xda2i_soft3.html
can anybody , modify the radio version, I currently have PUG's version of the ROM with radio 1.03. But if I install the new update it will downgrade my radio version to 1.00, which is not good thing, can anybody please modify the new ROM, so it doesnt downgrade the radio. :roll:
thank you :lol:
lamatao said:
can anybody , modify the radio version, I currently have PUG's version of the ROM with radio 1.03. But if I install the new update it will downgrade my radio version to 1.00, which is not good thing, can anybody please modify the new ROM, so it doesnt downgrade the radio. :roll:
thank you :lol:
Click to expand...
Click to collapse
DON'T UPGRADE THE RADIO IF YOU WANT TO USE BLACKBERRY!
RIM check the ROM version and RADIO version before they allow you to connect to the relay. If it's not an approved mix, your device IMEI will be BARRED from the relay.
If you don't need BB.... NO WORRIES!
D/loading now
If you don't need Blackberry, then you probably don't need this upgrade! ??
Anyone know/see any other changes?
Not check what else is new to busy playing with Blackberry, its working great!
Really happy to see that Calendar works properly with the BES
8)
Just need contacts & tasks now...
Hi Guys
Have not installed it yet on my xda IIs, but planning too. Can anyone say if the BB Client supports seeing "delivered" and "read" a la the RIM pager devices?
Many Thanks!
Chris
cbrow51 said:
Hi Guys
Have not installed it yet on my xda IIs, but planning too. Can anyone say if the BB Client supports seeing "delivered" and "read" a la the RIM pager devices?
Many Thanks!
Chris
Click to expand...
Click to collapse
Working very well on my XDAIIi using the new released ROM. Sending and receiving emails and calendar syncing from my corporate email exchange.
Thumbs up!
Hi Cychiam
That sounds good. I am particulary interested in the 'delivered' and 'read' functionality.
When you send an e-mail to someone, does this client show you when it has been delivered to the recepients device? Likewise, when the recepient has read the message, does this client send you a message or indicate that your message has been opened and read by the recipient?
Many Thanks
Chris
cbrow51 said:
Hi Cychiam
That sounds good. I am particulary interested in the 'delivered' and 'read' functionality.
When you send an e-mail to someone, does this client show you when it has been delivered to the recepients device? Likewise, when the recepient has read the message, does this client send you a message or indicate that your message has been opened and read by the recipient?
Many Thanks
Chris
Click to expand...
Click to collapse
Not quite sure what you really mean. When an email is successfully delivered/sent out, that mail be will moved to SENT folder. That's how I know it got sent out.
As for message opened and read by recipient, I don't think the Blackberry client on XDAIIs/XDAIIi now support it.
Hi Cychiam
By 'delivered' I mean that you know that the message you sent has successfully reached the intended recipient. For example, sometimes you may send an e-mail to someone but have the address wrong. It will still show up in your sent folder, but may not get delivered. MS Outlook will typically send you any error message back if it did not reach the recipeint. Wondering if this client has similar functionality..?
Regards
chris
I want to Cancel
Ok, Now we have blackberry Connect on the XDAIIi I now want Blackberry Enabled on my Sim and being told I can't on my Personal Account. ANy one know a way round this else I will just find a way to cancel it.
IS it me?
Is it me or have they removed teh detials on how to setup Internet Mail with Blackberry from teh software download pages? And HCnged teh info to INdicate teh Enterprise Server only?
Seems they have scaled down.
Can it run on the O2 XDA II?
Hi!
Ayone tested on O2 XDA II with WM2003se?
Thanks
Hi !!
edited from another thread....
I am enjoying my Kaiser very much, but still got some problems....
Any advice is always welcome !
When I first used my TyTn II, after charging, I logged on to MSN with no problems. Haven't used MSN since....
I don't think the Vodafone signal is so good where I live but I can usually connect to the Internet using Explorer or Opera, but I can't seem to make MSN connect.
I was in the city centre today where the signal should be strong but MSN still would not connect.
It does not give an error message, just that I might be in an "area with bad reception".
Vodafone tell me my services are all OK for my phone...
If I use WiFi at home, I still cannot connect MSN using WiFi
I am not sure where to begin to diagnose the problem with MSN. I will start searching now........ but any advice is appreciated...
edit... I am wondering whether to unistall MSN and re-install
Any advice appreciated!
Ofiaich
I would re-install MSN with the latest version, and try again...
found in the sticky.
http://forum.xda-developers.com/forumdisplay.php?f=377
Hi Jewcookie!
thanks ! I downloaded frm here and will check that it is the latest..
It is WLM Build 1400 ....
But are there any other solutions?
Ofiaich
would this installed version of MSN use data or TXT message allotment?
Hi,
i read in another thread that it is data,,
Ofiaich
Hi!
can anyone think of good reasons why my MSN stopped working, and what i can do about it?
I would rather try to sort out the problem, than just install another version..
Ofiaich
are you using windows live messenger or are you using OZIM or another IM program?
I know with OZIM, since it uses text it doesn't connect when you are on wifi.
I was using the MSN thatis built into the ROM!!
Ofiaich
I know you are in UK and things are different but the IM program built into the rom for me was OZIM which uses texting. I would suggest to go the sticky of useful cabs and download Windows Live, thats has Live Messenger Built into it.
http://forum.xda-developers.com/showthread.php?t=332438
Are you asian?
I know that some olders versions of CE-stars could lead to malfunctioning of live messenger=/ so even if you aren't azn if you install language support for other languages it might still screw things up
Thanks jallenclark and season007,
My Kaiser has Windows live and MSN, but not working..
I am Irish, but I have Japanese display and input installed on my Kaiser...
I guess I could remove them and see if my MSN works again..!!
Then if it does not work, install the newest cab for Windows Live and MSN..
Thanks...
Ofiaich
Hi!
removing Japanese fonts and input did not resolve the problem....
I really do not understand why my MSN does not connect... when Agile Messenger does...
edit - I did a hard reset and installed everything from scratch, checking one by one, if MSN worked.
It stopped working after the installing of Japanese dispaly and input software...
Ofiaich
so any way to make MSN and CE Star works together ?
A little help please!
firstly, Bandswitch 2.4.2 doesn't seems to work on my Kaiser, anyone knows why
secondly, has anyone got opera 8.65 working on their kaiser, without the upgrade?
thirdly, is there a cab/program that can seperate the SMS/MMS, without the upgrade
many thanks in advance
Hi does anyone know is there's any vnc SERVER compatible with the kaiser??
I'm looking for it because basically I want to controll my kai from my MAC..I've seen on pc that tere are some applications that will let me do it, but no one of them is compatible with mac os..
can anyone help me to solve this little problem??
thanks a lot!!
mubasa said:
Hi does anyone know is there's any vnc SERVER compatible with the kaiser??
I'm looking for it because basically I want to controll my kai from my MAC..I've seen on pc that tere are some applications that will let me do it, but no one of them is compatible with mac os..
can anyone help me to solve this little problem??
thanks a lot!!
Click to expand...
Click to collapse
Always read my articles!
PocketVncServ is your friend as explained at http://www.pocketpcmag.com/blogs/index.php?blog=3&p=514&more=1&c=1&tb=1&pb=1
HI,
Since I upgrade to Diamond 2 I have a problem with active sync.
Almoste everyday I get an error in activesync saying there where changes in the pc that needs to resync everyhthing.
The resync works fine.
The problem is that every contact in teh people favorites tabs disapear. Sinec in practice was deleted and resynched.
Does anyone has this problem also?
If so is there a fix?
Or anyone knows how to restore the resgitry that has those settings so that I just import a reg file?
Thanks in advance.
Regards,
Jose
No help I'm afraid - but I have had this on the TD1, TyTN2 and TyTN1 - on XP and Vista (x86 and x64). Only about once every few months but I never found an answer for it. I posted in many forums at the time it occurred but no one knows why it happens. If you ever find out what is causing it please let me know!
R