I just the other day flashed L26's Diamond V12 w/radio 1.65.24.36, and i notice the new autocorrect feature i never had with Dutty's. Instead of recommending words in a small box, a large bar appears with a list of recommended words.
I dont like this so I disabled all autocorrect features and unchecked suggest words. However now I still get the large bar and in it the letters I write are repeated up in the bar for no apparent reason, making sms very slow and annoying.
In addition, i often can't navigate using the arrows to other parts of my message like i used to, instead it will highlight the word I have finished typing and copy/paste it into obscure places in my message. Anyone share this problem or know how I can fix it?
afro_thunder said:
I just the other day flashed L26's Diamond V12 w/radio 1.65.24.36, and i notice the new autocorrect feature i never had with Dutty's. Instead of recommending words in a small box, a large bar appears with a list of recommended words.
I dont like this so I disabled all autocorrect features and unchecked suggest words. However now I still get the large bar and in it the letters I write are repeated up in the bar for no apparent reason, making sms very slow and annoying.
In addition, i often can't navigate using the arrows to other parts of my message like i used to, instead it will highlight the word I have finished typing and copy/paste it into obscure places in my message. Anyone share this problem or know how I can fix it?
Click to expand...
Click to collapse
IF you followed forum rules, and posted this in the L26 ROM thread, and search the thread. You will find your answer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
When I open an incoming message, the kaiser always shows me the end of it. Does anyone can tell me why this happens, how can I change it. Same question for: I slide to the bottom - it scrolls up!?
afaik you can change this behaviour with Kaiser Tweaks or Schaps Advanced Config - you have to enable d-pad navigation (with disabled it's scrolling down).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have changed the d-pad-navigation, using kaiser tweaks. this does not solve my problem. It still scrolls in the wrong direction, what isn´t the bad but I hate to see the and of a message before I´ve seen the beginning.´
Ideas? Solutions?
I have changed the d-pad-navigation, using kaiser tweaks. this does not solve my problem. It still scrolls in the wrong direction, what isn´t the bad but I hate to see the and of a message before I´ve seen the beginning.
Ideas? Solutions?
I think the majority of people can resolve this be Disabling (yes, disabling, not enabling) the D-Pad Navigation in Kaiser Tweak. Solved mine, and many more. Remember to Soft reset after you've changed it.
Audio said:
I think the majority of people can resolve this be Disabling (yes, disabling, not enabling) the D-Pad Navigation in Kaiser Tweak. Solved mine, and many more. Remember to Soft reset after you've changed it.
Click to expand...
Click to collapse
ooops....sorry for the wrong statement....
Hello,
I started having a problem with my Text messaging and email out of the blue. Now when I click on a contact name or compose a new text message, all I get is a white screen. Same thing with emailing. Can someone please help in addressing this problem. I've attached 2 screenshots of how the screen looks like. I cannot write a new message or even view messages.
I'm with FIDO and I have dutty's latest ROM (June 7)
Thank you in advance....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Are you typing the numbers from the SIM contacts or from the built-in contacts of the phone itself?
Prolab said:
Are you typing the numbers from the SIM contacts or from the built-in contacts of the phone itself?
Click to expand...
Click to collapse
What do you mean, when i want to text a person, I click the name and click send text message, it doesn't matter if its a SIM contact or not. The same screen happens when I compose a new email or text massage. As I said I cannot read or write a new message .
Appreciate any help
bump!
Any help please
i had this similar kinda problem.
when opened/composing sms it shows bottom of the screen first (with nothing in it at all) but then, when pushing up once it got back up and i was able to compose or read the sms. no big harm, but aggravating anyways...
i found this little "bug" at KaiserTweak program, that is used to do some registry tweaks. i had set on the feature that allows to scroll full screen in Internet Explorer, when pushing right/left buttons on landscape mode.
disabling this feature solved the problem. I'm using WM6 on TyTN.
Hello folks.
Since a recent hard reset, the word completion function seems to have stopped working. This is annoying when writing the content of a text or email and a right pain when trying to put the recipient's name in.
It's all switched on in Settings > Input > Word completion, so I don't have a scooby what to do.
Any suggestions?
You'll have to build up a word usage history again before it'll start to work. I find the same thing happens with my TyTN II after a hard reset and it affects web form submissions for me - things like place names on travelines website. Give it time and the amnesia will subside
1) If you are using Death's ROM's, those were set to suggest zero words for some reason; install KaiserTweak and change the setting
2) If you have installed KaiserTweak you may have set it to zero
3) If you have installed KaiserTweak and chosen to enable "XT9" that stops autocomplete
Any of these sound right?
Many thanks to you both for helping.
Kiwi, I should've made it clear that I was getting NO words suggested whatsoever - neither words I had used myself or those in the Kaiser's built-in lexicon (pesky US spellings and all!)
As it happened, it was the XT9 in Kaiser Tweak suggested by jdmba that was the problem.
I disabled it, soft reset and now I'm back in the game!
Again, many thanks to you both.
Hi people,
i have likely the same problem.. the word completion do not work
i use the Block Recognizer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and the setup for the autocompletion is enable ->
i dont have installed "KaiserTweak" but i use the "Ultimate-X2.V8" so maybe is included but where found this WT9 think ?
i have found this ->
but i dont see any option to turn it off.
thx people
Hi there,
Listen, Robert Ferris created a great little tool BAF GPS Toggle (link). I really use it all the time. However, as you can see in my screenshot it does not go well with a Touch Pro visually. It is really difficult to open and start with a stylus as the space is very limited and often I open an adjoining program/function....
As Robert seems to be busy and said not to have time to keep developing this further, I think it is up to us to make the necessarey adjustments. If I want to do that,... Where do I need to make adjustments, how can I change the today line to fit the text? Where are the images, so I can increase their sizes? And would that do it?
Not only would it make a solution, but it would be fun to learn to do this myself as well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By the way, I am leaving China for Australia and am not sure how often and how quick I will have access to internet. So if I don't reply immediately you know why.
Thanks for your advice!
I don't know about your program specifically but you can change the size of the text displayed by going to Settings->System->Screen
In there there is a tab called 'Text Size', you can change the size of your text there.
Thanks for the suggestion. However, that would change all text sizes... not this individual program line....
From the looks of it, the icon on the left next to the text is the cause. On a 320x240 screen (on the developers site) it displays as the same size as the text. But when you run it on a VGA screen the icon appears half the size.
The developer has to make this cosmetic change or you can resource hack the program to try to replace the icon (if it'll work)
...Sorry, just tried this for you, it won't change the line height if you resource hack the program. The author will have to make the changes internally to the dll.
Hi,
There is a problem I have with the Android keyboard. You may know Spanish (my language) uses accents to determine a word's strong syllable. The problem is, Android's keyboard seems to relegate words with accents to the end of the autocomplete list. Take a look at this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here I'm trying to write "también" ("also" in English) but the dictionary wants to write "tambienes" instead (which to my knowledge isn't even a real word).
Here I'm trying to write "iré este año" (I will go this year) but the dictionary prefers "Nano" to "año", even though that word is much less similar to the letters I'm entering. Not only that: it offers many other words (anoxe, amor, amplia, animales... for God's sake, some of them aren't even remotely similar!) and the right one ("año", meaning "year") only appears last. That indicates Android's dictionary prefers literally anything before words including accents.
I really think this is wrong and should be solved, where would be the best place to file a bug?
I've noticed if I'm aiming for a short word, it will suggest all the longer words (and variations) before my word. Sometimes placing it three clicks to the right, when all I needed was to write three more letters to finish the word.
"Acquiesce" is an ok example. However little that word is used. There's others, just can't think of them. So maybe post in Google's Help forum.