Related
This could sound stupid, but...it's not, so who want's to help, please do so, and who doesn't, please don't bother...
I didn't do anything...my wizard just didn't turn on. I left it charging cause id ran out of battery...and now it's turned off and won't start. When I plug it in, there is a red led on top...no other reactions...
Please, if someone else knows somethin that could be of help I would apreciate it. I don't think it's the rom...or anything else software related...
Mabe the main battery but I wouldn't know, because I don't know how to find out.
Thanks in advance !
First of all -- which charger are you using?? Are you using the OEM WALL charger, or are you using the USB Sync cable to charge with??
If you're not using the OEM wall charger, you're probably not pulling enough juice through the USB cable to revive your battery.
Pop out your battery. Wait a couple of minutes and put it back in. Connect your Wizard to the OEM WALL charger. This should do the trick. If not, you're going to need to get a new battery. They don't like being completely discharged.
Problem solved !!!
I solved the problem.
I pluged into charger without the battery inside ... it showed the red light...then I put the battery in, while charging ... and the red light went off. Then I pressed on turn off button ... and tadaa ... it turned on. The battery was 0%...I read that this "red light" problem is quite common not only for wizards, but other HTC models too.
Thanks XDA developers !
Especially to mikechannon for the best indications
anichillus said:
So, having the problem solved, I request the deletion of my thread.
Thanks XDA developers !
Click to expand...
Click to collapse
Change the topic to better reflect the content of the thread so that others can learn from it. Never delete it Great to hear your wizard is back up and running!
Sorry for my english.
My f00kin problem is that I can't recharge my kaiser anymore!!!
I plug the external charger and the orange led is on for a minute or 2, then it turns off.
Attached to the pc, no light
HEEEEEEEEEEEEEEEEEEEEEEEEEEEELP PLZ!!!
ot: I'm using Dutty's7b and, till yesterday, everything was working good. I've also hard resetted the device, but the problem still here...
leopardone said:
Sorry for my english.
My f00kin problem is that I can't recharge my kaiser anymore!!!
I plug the external charger and the orange led is on for a minute or 2, then it turns off.
Attached to the pc, no light
HEEEEEEEEEEEEEEEEEEEEEEEEEEEELP PLZ!!!
ot: I'm using Dutty's7b and, till yesterday, everything was working good. I've also hard resetted the device, but the problem still here...
Click to expand...
Click to collapse
Can you use someone else's battery to try. Your battery may have just died, some do from time to time.
mmm
I'm not sure, but I don't think it's a battery death problem.
When I turn off it, I CAN CHARGE IT with pc.
I've noticed that if it's turned on, no charge.
If it's turned off, from 15% is now 36% of charge.
WHY???
So if you leave the phone turned off and connected to the PC for a few hours does the battery recharge to 100% and then the orange light change to green? If you then turn the phone on does the light still go out after a couple of minutes? The current draw will be lower when the battery is 100% charged (as it will be when charging while the phone is off). Some PC's can be flakey with high current draw devices on the USB port.
In the situation you described when the light goes off, will the phone still remain connected via Active Sync (or Vista equivalent)? I'm trying to weed out whether the USB connection has anything to do with it. As for those mains chargers, my one (which came with the PPC) worked about 4 times and the first time I had to recharge the PPC from a totally flat battery it died about 3 seconds into the charge. There was a loud click from the charger and it's light extinguished so I dont have much faith in the mark 2 chargers supplied to UK customers. I'm currently waiting on a different warranty replacement - hopefully like the original type with interchangable 'head' to suit different countries.
now it's not fully recharged, but I've just now turned on the phone and the % is growing.
I've always recharged my phone via pc because I left it connected to my pc at work every day during the working day.
only sometime I recharge it via wall plug at home.
dunno why but from yesterday the wall plug works 2 (or less) minutes and the pc is not anymore able to charge the phone.
now, with all the phone switched off (so, also activesync connection closed), the pc can recharge it.
ARGH
I have also the same problem since yesterday
kaher said:
I have also the same problem since yesterday
Click to expand...
Click to collapse
REALLY???
are you using the same rom?
kaher said:
I have also the same problem since yesterday
Click to expand...
Click to collapse
Did you do anything with the PPC before the problem occurred or was it just out of the blue?
I'd also like to know from leopardone how it goes with regards to answering my questions once the battery is fully charged (if it gets that far).
leopardone said:
Sorry for my english.
My f00kin problem is that I can't recharge my kaiser anymore!!!
I plug the external charger and the orange led is on for a minute or 2, then it turns off.
Attached to the pc, no light
HEEEEEEEEEEEEEEEEEEEEEEEEEEEELP PLZ!!!
ot: I'm using Dutty's7b and, till yesterday, everything was working good. I've also hard resetted the device, but the problem still here...
Click to expand...
Click to collapse
Take batt. 10m out, i had this problem long time ago.
Do you use a other AC loader.... use only the org. AC loader !!!!
Install batt. status and take a look... you must wait a few min. before the batt is charged.
Flying Kiwi said:
Did you do anything with the PPC before the problem occurred or was it just out of the blue?
I'd also like to know from leopardone how it goes with regards to answering my questions once the battery is fully charged (if it gets that far).
Click to expand...
Click to collapse
I didn't anything (and, also, in the doubt, I've hard resetted everything on order to have a clean system)
The phone is still in charge.
I'll let you know as soon as possible
yes the same rom.
the big problem now is that I also can not make connection with my pc to install an original rom in case it got to be returned for repair.
SatScan said:
Take batt. 10m out, i had this problem long time ago.
Do you use a other AC loader.... use only the org. AC loader !!!!
Install batt. status and take a look... you must wait a few min. before the batt is charged.
Click to expand...
Click to collapse
let me try!!!
mmm for the ac adaptor I use 2 different: the old one for my old p3600 and the "original" one.
kaher said:
yes the same rom.
the big problem now is that I also can not make connection with my pc to install an original rom in case it got to be returned for repair.
Click to expand...
Click to collapse
turn it off and charge it.
in this way I can charge it.
btw, now I'm trying the "method" of taking out the battery for some minutes...
Flying Kiwi said:
I'd also like to know from leopardone how it goes with regards to answering my questions once the battery is fully charged (if it gets that far).
Click to expand...
Click to collapse
after 15 min without battery, I've turned on the pda and I'm trying to charge it.
it is WORKING!!!
the % is growing under my eyes!!!
THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
I hope will not happens anymore...
btw: the problem, in conclusion, belongs to the hardware, and not to the rom, isn't it?
leopardone said:
after 15 min without battery, I've turned on the pda and I'm trying to charge it.
it is WORKING!!!
the % is growing under my eyes!!!
THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
I hope will not happens anymore...
btw: the problem, in conclusion, belongs to the hardware, and not to the rom, isn't it?
Click to expand...
Click to collapse
glad that yours is working again ,mine is not working yet , I treid everything mentioned above but nothing work
kaher said:
glad that yours is working again ,mine is not working yet , I treid everything mentioned above but nothing work
Click to expand...
Click to collapse
argh!
have you also hard resetted the device?
Hey I have the same problem... I am on the original HTC Rom.
All of a sudden today the batt is not charging on the wall socket or the PC USB cable.
There is no light whatsoever, The active sync is also not connecting.
I have hard resetted even then the same problem, I am guessing it is a hardware & not a software problem coz I didnt install any new prog/app since last time I charged.
Now I have removed the Batt, will reattach and check in about 15 mins lets hope it works...
Shall update soon.
rohanmaini said:
Hey I have the same problem... I am on the original HTC Rom.
All of a sudden today the batt is not charging on the wall socket or the PC USB cable.
There is no light whatsoever, The active sync is also not connecting.
I have hard resetted even then the same problem, I am guessing it is a hardware & not a software problem coz I didnt install any new prog/app since last time I charged.
Now I have removed the Batt, will reattach and check in about 15 mins lets hope it works...
Shall update soon.
Click to expand...
Click to collapse
Nope, Removing the battery and waited for 30 mins reconnected the batt still not working.
Nor is my kaiser charging while the phone is switched off.
The problem is notof the USB port coz the USB headphones are working fine..
I got a battery problem as well. Problem started 3 days ago (20/12-07)
My problem is that the battery drains to fast.. disconnected it around 02:00 when I was of to bed, (battery 100%) but when I woke up again around 09:00 the phone was dead. Thats only 7 hours.. and in standby mode!
I'm on the original HTC UK ROM and I have only installd a couple programs like the Kaiser Tweak, Handysafe, Wififofum, Sprite backup, Citrix client, puTTY, PocketRAR, Total Commander, TCPMP, Flash player, PK NewWarningColorBatteryClean3G, HTC GPRSmonitor.
So I'm guessing one of these programs drains the battery even when the phone in on sleep.... the ones I installed since 20/12-07 is PocketRAR, TCPMP, Flash player, PK NewWarningColorBatteryClean3G.
Has anyone had battery problems after installing these..
Any help is appreciated.
it is a hardware problem
when I hold the cable of the charger and push it against the usb port it does charge. when I stop pushing it stops charging.
I was flashing my phone repeatedly last night. I've read the forums and have done about 4 successful flashes already. The problem is, I've found a WM6 rom for the Wizard that I wanted better than the ROM already inside my phone, and I proceeded to flash it. But I left the computer and phone by itself so that I could rest a bit (I've spent hours in front of the computer flashing my phone), and fell asleep. When I woke up, I noticed that the flashing failed, and it was at the tri-color screen. Then, it died on me. No battery, obviously, being stuck at the tri-color screen the whole night. Now, it doesn't charge or turn on. I know I just need a battery to run the phone. But where I'm from, batteries for the Cingular 8125 are rare, and I'm one of the few that has an 8125.
I don't know anyone who has a battery for the 8125, and there's nowhere to buy from here. Any recommendations?
First of all be sure that you haven't flashed a G4 ROM in a G3 device (or vice-versa) which would have made it a brick.
In case you haven't screwed up the bootloaders then look for the battery jump start thread that teaches how to revive a dead battery
good luck
ianestradalives said:
I was flashing my phone repeatedly last night. I've read the forums and have done about 4 successful flashes already. The problem is, I've found a WM6 rom for the Wizard that I wanted better than the ROM already inside my phone, and I proceeded to flash it. But I left the computer and phone by itself so that I could rest a bit (I've spent hours in front of the computer flashing my phone), and fell asleep. When I woke up, I noticed that the flashing failed, and it was at the tri-color screen. Then, it died on me. No battery, obviously, being stuck at the tri-color screen the whole night. Now, it doesn't charge or turn on. I know I just need a battery to run the phone. But where I'm from, batteries for the Cingular 8125 are rare, and I'm one of the few that has an 8125.
I don't know anyone who has a battery for the 8125, and there's nowhere to buy from here. Any recommendations?
Click to expand...
Click to collapse
First os all your Wizard is not a brick. To revive your battery try using a wall charger to charge you battery, or you can leave it attahed to a wall charger for some time and it should start charging after 10-15 mins (becoz one i got a dead battery and did the same) Once the battery is revived then flash it to a Official ROM, afterwards any custom ROMs or what so ever. I hope i helped. TC
i've the same problem!!! i leave the phone attached the whole night to the charger...but it was in bootmode, so it doesn't charge!!! it hasn't the power to flash my phone...when it arrives to the 85% (when the phone write into the flash memory) it reboots.....what must i do? i tried to jump start...with a 12v adapter...but nothing....
It won't charge in Bootloaders,as it doesn't provide any charging circuit .The phone must have and boot up to a working OS (Windows) to start charging,only then it has a charging circuit.
Try to get a fully charged batter ,may be borrow it from a friend or try to charge your battery with friends phone,flash a rom and only it'll start to charge.
i know....but...i have not a friend with a ppc like mine!!!! and even if i'll buy a new battery....how can i charge it????? a friend of mine has a qtek 9000....but the battery is different from mine.......
F0ll3 said:
i know....but...i have not a friend with a ppc like mine!!!! and even if i'll buy a new battery....how can i charge it????? a friend of mine has a qtek 9000....but the battery is different from mine.......
Click to expand...
Click to collapse
No need to buy a battery i say you use a External Battery Charger. Because even buying it would be cheaper then the battery itself and would help you in future too. I hope i helped. TC
Thanks
xda2_haseeb said:
First os all your Wizard is not a brick. To revive your battery try using a wall charger to charge you battery, or you can leave it attahed to a wall charger for some time and it should start charging after 10-15 mins (becoz one i got a dead battery and did the same) Once the battery is revived then flash it to a Official ROM, afterwards any custom ROMs or what so ever. I hope i helped. TC
Click to expand...
Click to collapse
Thanks, dude. I never even tried charging it with the wall charger. There seems to be other people that have the same problem as I do. Now my phone is up at the tri-color screen, and I'm charging it, then Ill start flashing again. Thanks again!
No Problem but now remember if you find ppl with same problem (on the forum) dont forget to guide them to this Thread. And no need for the thanks. TC
zabardast_1 said:
It won't charge in Bootloaders,as it doesn't provide any charging circuit .The phone must have and boot up to a working OS (Windows) to start charging,only then it has a charging circuit.
Try to get a fully charged batter ,may be borrow it from a friend or try to charge your battery with friends phone,flash a rom and only it'll start to charge.
Click to expand...
Click to collapse
Thanks, dude. I never even tried charging it with the wall charger. There seems to be other people that have the same problem as I do. Now my phone is up at the tri-color screen, and I'm charging it, then Ill start flashing again. Thanks again!
Click to expand...
Click to collapse
@ianestradalives's as zabardast_1's has said, your phone WILL NOT CHARGE unless windows Boots. Either buy a new battery or find someone with the same phone or an Orbit(as they use the same battery) also if you buy a new battery it generally arrives with enough charge to use for flashing(It did for me anyway). The only other way to do it would be to buy a dock with a second battery charging slot. Using the wall charger wont do anything except stop it from restarting ,while its plugged in.
@XDA2_haseeb why point people who have the same problem to this thread, if the answer you have given is incorrect?
scousemartin said:
@ianestradalives's as zabardast_1's has said, your phone WILL NOT CHARGE unless windows Boots. Either buy a new battery or find someone with the same phone or an Orbit(as they use the same battery) also if you buy a new battery it generally arrives with enough charge to use for flashing(It did for me anyway). The only other way to do it would be to buy a dock with a second battery charging slot. Using the wall charger wont do anything except stop it from restarting ,while its plugged in.
@XDA2_haseeb why point people who have the same problem to this thread, if the answer you have given is incorrect?
Click to expand...
Click to collapse
Dude, sorry to disappoint you, but his advice was correct. My phone is now up and running, and it has NBD 9.2. The advice he has given is correct. It works.
Ok,was your phone in Bootloaders (muliticolor screen) or with a working OS installed on it when you charged with a wall charger ?
That's exactly what was i was about to ask Zabardast_1
As there is no way he could charge his phone while it is in bootloader mode. He either had battery power already in it and messed up the flash or you have just been lucky when you took the battery out of the unit and reinserted it and there was enough power left to flash
zabardast_1 said:
Ok,was your phone in Bootloaders (muliticolor screen) or with a working OS installed on it when you charged with a wall charger ?
Click to expand...
Click to collapse
In bootloader screen. If you were flashing a rom and it failed, you usually end up in the tri-color (aka "Bootloader") screen. Do what haseeb said (like I did) and plug your wizard to a wall charger and wait for a few minutes. When I plugged mine, it immediately lit up. Good hunting!
scousemartin said:
That's exactly what was i was about to ask Zabardast_1
As there is no way he could charge his phone while it is in bootloader mode. He either had battery power already in it and messed up the flash or you have just been lucky when you took the battery out of the unit and reinserted it and there was enough power left to flash
Click to expand...
Click to collapse
Nope. I'm sure the battery was drained. The other night, my phone was in the bootloader screen THE WHOLE NIGHT. And yesterday, I tried reflashing, but it won't start anymore because of - obviously - no battery power.
IF you don't believe me, fail a flash and drain the battery. Then plug it into the wall. It really works.
scousemartin
YUP! thats very true.
The question here is 'How did he charge in Bootloaders with a wall charger',it has to have a working OS on it to start the charging circuit,which isn't present while in Bootloaders.
Flashing is a separate issue.
it will light up as it has power but it WONT CHARGE IT. You were LUCKY that's all and you had power in your battery. You just never realised it. If you want to prove us wrong let the battery go low and then try your revival attempt again. I guarantee you will be buying another battery or charging it somewhere else
also i have been through this personally with my xda mini-s and the only remedy was to buy another battery (or recharge it). You could leave your phone connected to the wall charger for a week and it wont make a blind bit of difference to the battery level. I know because i tried.
Anyway glad you got it sorted ,but the solution to your problem was not charging the phone. Thats all i have to say on this matter now
scousemartin said:
also i have been through this personally with my xda mini-s and the only remedy was to buy another battery (or recharge it). You could leave your phone connected to the wall charger for a week and it wont make a blind bit of difference to the battery level. I know because i tried.
Anyway glad you got it sorted ,but the solution to your problem was not charging the phone. Thats all i have to say on this matter now
Click to expand...
Click to collapse
It did get sorted. But I am really sure about the battery thing. I guess this is an anomaly. Besides, the XDA is different from a Wizard.
lol the xda mini-s is exactly the same device a 8125 is, they re both wizards
What the heck is going on?
I'm pretty sure this has nothing to do with the ROM, because it did this with the factory ROM, Manila 2d and now WM6.5.
I turned the phone off, unplugged it, removed the battery. I put the battery back in, replace the cover and press the power button. Nothing happens. I plug the phone back in to the wall charger and put power, it turns on....for about 3 seconds then reboots and it would seem that it will do this for as long as I let it go. If I unplug the phone while this is going on, it will die.
The last time this happened, it took it about a day and a half to sort itself out. It almost seems like its a battery issue.
Any thoughts or ideas?
UPDATE!
I took the sim card out of the phone for a few seconds and the phone seems to be working now.... But its been up and running for about 20 minute now with no sings of acting up.
zz_3.14_zz said:
UPDATE!
I took the sim card out of the phone for a few seconds and the phone seems to be working now.... But its been up and running for about 20 minute now with no sings of acting up.
Click to expand...
Click to collapse
mine started doing that today. went to use the camera and it reset then when it came back on it said battery was drained(this happened around 1pm and i always get a full day out of battery) and reset. have it on a charge right now but will not turn on. took out battery and put it back in with no luck. i will try to fully charge battery and take out sim. if all else fails i will try to hard reset. thanks
kaiser won't turn on
LuXx said:
mine started doing that today. went to use the camera and it reset then when it came back on it said battery was drained(this happened around 1pm and i always get a full day out of battery) and reset. have it on a charge right now but will not turn on. took out battery and put it back in with no luck. i will try to fully charge battery and take out sim. if all else fails i will try to hard reset. thanks
Click to expand...
Click to collapse
tried to charge the pda all night the light stayed orange and never turned green indicating full charge. tried hard reset and when it goes in to prepare rom it shuts off like dead battery. when i plug in the pda to charge battery and then turn on the phone it freezes on splash screen. if i turn on phone then plug in to charge it acts like i havn't pluged in charger. is it the pda or battery?
I am not 100% sure on this, but to me it sounds like the battery.. and that is a MUICH cheaper option to test out... unfortunatly you ahveto wait for shippng typicalyl unless you have a friend who has the same phone.. I got 2 backups and a stand alone charger now... The other option could be your USB port... I have not heard this specific problem with them.... but I am a PC tech and have seen very simmilar problems with laptops... Usually the first think to for is the power port... Just like out phone, if the device is not on a flat surface and such when it is plugging it, it tweaks the port and it eventualyl breaks... on laptops it is not uncommon that when plugged in, the LEF wil light up saying it is getting power to charge, but it enver charges the battery, and even sometimes can;t power up the full system.. .It sort of sounds like this is what you phone is doing as well.. .If that is the problem the stand alone charger would work (my son broke off his usb all together and now syncs via bluetooth and jsut changes batteries.. he has 3 himself as well) If you search online, you can usualyl find a kti with a battery or 2 and a charger/dockign station for under $20US total. Good luck!
LuXx said:
tried to charge the pda all night the light stayed orange and never turned green indicating full charge. tried hard reset and when it goes in to prepare rom it shuts off like dead battery. when i plug in the pda to charge battery and then turn on the phone it freezes on splash screen. if i turn on phone then plug in to charge it acts like i havn't pluged in charger. is it the pda or battery?
Click to expand...
Click to collapse
Teej53214 said:
I am not 100% sure on this, but to me it sounds like the battery.. and that is a MUICH cheaper option to test out... unfortunatly you ahveto wait for shippng typicalyl unless you have a friend who has the same phone.. I got 2 backups and a stand alone charger now... The other option could be your USB port... I have not heard this specific problem with them.... but I am a PC tech and have seen very simmilar problems with laptops... Usually the first think to for is the power port... Just like out phone, if the device is not on a flat surface and such when it is plugging it, it tweaks the port and it eventualyl breaks... on laptops it is not uncommon that when plugged in, the LEF wil light up saying it is getting power to charge, but it enver charges the battery, and even sometimes can;t power up the full system.. .It sort of sounds like this is what you phone is doing as well.. .If that is the problem the stand alone charger would work (my son broke off his usb all together and now syncs via bluetooth and jsut changes batteries.. he has 3 himself as well) If you search online, you can usualyl find a kti with a battery or 2 and a charger/dockign station for under $20US total. Good luck!
Click to expand...
Click to collapse
Thank you for your reply! I have just ordered a new battery and will post my findings when it comes. Thanks again.
oh no
LuXx said:
Thank you for your reply! I have just ordered a new battery and will post my findings when it comes. Thanks again.
Click to expand...
Click to collapse
no luck with the new battery. still doing the same thing. please someone help me! Thanks
LuXx said:
no luck with the new battery. still doing the same thing. please someone help me! Thanks
Click to expand...
Click to collapse
tried bootloader and installed official att rom and never shut off. when it was finished with install same issues appeared. help
For anyone facing this issue I would not recommend wasting money on a new battery as this issue has been around with few users since the Kaiser "Tilt" first came out and I've never seen ANY reports that a new battery fixes this. People have bought new batteries, fully charged their battery from a docking station, tried their friends fully charged battery all with the same result. I had this power down issue a Looong time ago my first week in with the Kaiser and managed a fix and am using the same battery now. Although it seems the battery is not being fully charged it's important to leave it charging until you'd assume it's fully charged and get into bootloader mode and flash an official htc Tytn 2 rom. It should flash completely, and the fact that it does not die immediately as on normal boot indicates it is not the battery but the rom. It did take me the whole afternoon of Flashing, recharging and repeating before it finally kicked in. Also, from reading older posts, it seems most if not all users like myself fixed this by flashing the older official htc wm 6.0; worth a shot at least.
kaalgoosy said:
Also, from reading older posts, it seems most if not all users like myself fixed this by flashing the older official htc wm 6.0; worth a shot at least.
Click to expand...
Click to collapse
Yup, that is what I had to today (I hard reset, actually), with barely enough battery life to do this.
Then the bloody unit came up and was charging - amazing, really!
(Was using the official HTC 6.1 upgraded WindowsMobile OS)
here is my 2 cents....
I owned five Tilts, replaced four of them with warranty issues ... so i have faced this dilemma on at least two of them.
First see if the USB tongue is loose. To do this try to gently tap it with the stylus. If the tongue inside the USB port is loose then you will be facing rebooting and other issues and troubles in the future. The USB tongue gets used and jerked every time you connect your device to your PC or wired headset. If you are still under warranty and the USB connector tongue is loose I recommend returning the phone ( if you still can) and getting a replacement. There is no easy fix for a loose USB connection tongue as i have taken one apart and it is very difficult to repair or replace and very easy to mess it up further.
So, my advice to all Kaiser owners... be careful when plugging and unplugging your phones through the USB. Do it gently as the connectors are very fragile.
For those that have the above issues, I recommend using a separate battery charger tray, avoid plugging the USB as much as you can, and if you must, then administer extra care. The rebooting will stop if you plug the USB cable to the device and move it up and down a hair then holding steady. And most likely you will not get a full charge or even a partial charge. The biggest culprit to this problem is car chargers, and second, is inserting the stylus by mistake (when it is dark and hard to see) in the USB port instead of the Reset hole by accident.
I know that it has been said that "if your touchpad completely dies, you must have the OEM charger to start it back up". At first this seems true. . .However! I would like to report that twice now, when it was completely dead and displaying the "plug in the original charger for reliable charging or die because im a juice nazi", I was able after about 4 hours of just leaving it alone plugged into a 1amp phone charger, to get it to charge up and boot. This may have already been discovered but I couldn't find mention of it. Just wanted to give hope to someone that might have given up on this.
einstein910 said:
I know that it has been said that "if your touchpad completely dies, you must have the OEM charger to start it back up". At first this seems true. . .However! I would like to report that twice now, when it was completely dead and displaying the "plug in the original charger for reliable charging or die because im a juice nazi", I was able after about 4 hours of just leaving it alone plugged into a 1amp phone charger, to get it to charge up and boot. This may have already been discovered but I couldn't find mention of it. Just wanted to give hope to someone that might have given up on this.
Click to expand...
Click to collapse
So when you connect 1 amp phone charger, does the TP says to connect the original charger? Even if it says to connect the original charger, and leaving it for 4 hours the TP charged is that right???
My problem is when I connect to cell phone charger, it says to connect original charger.
When I connect original charger, the TP stays at 0% even after connecting the charger overnight. I dont know what is the problem? is it charger, is it battery or is it TP..
atrix4nag said:
So when you connect 1 amp phone charger, does the TP says to connect the original charger? Even if it says to connect the original charger, and leaving it for 4 hours the TP charged is that right???
Click to expand...
Click to collapse
Yes.
atrix4nag said:
My problem is when I connect to cell phone charger, it says to connect original charger.
When I connect original charger, the TP stays at 0% even after connecting the charger overnight. I dont know what is the problem? is it charger, is it battery or is it TP..
Click to expand...
Click to collapse
The message will be displayed but it is gradually charging in the background. When it gets enough juice, it will start up and charge faster. In your case it sounds like either your port or battery are damaged somehow. Possibly the charging circuitry but that is unlikely. If you don't have an original charger or touchstone, then your options are limited. They aren't very expensive on ebay though. I would let it charge on a good 1 amp charger for a few days and see what happens then. Mine did the "soft brick" crap once where it was completely unresponsive and ran completely dead and i just charged it for 4 days and forgot about it and when i remembered it, it had powered on and booted. TPs are funny devices. Expect anything and report it if you don't mind. Maybe we can get this sorted out.
einstein910 said:
Yes.
The message will be displayed but it is gradually charging in the background. When it gets enough juice, it will start up and charge faster. In your case it sounds like either your port or battery are damaged somehow. Possibly the charging circuitry but that is unlikely. If you don't have an original charger or touchstone, then your options are limited. They aren't very expensive on ebay though. I would let it charge on a good 1 amp charger for a few days and see what happens then. Mine did the "soft brick" crap once where it was completely unresponsive and ran completely dead and i just charged it for 4 days and forgot about it and when i remembered it, it had powered on and booted. TPs are funny devices. Expect anything and report it if you don't mind. Maybe we can get this sorted out.
Click to expand...
Click to collapse
Thanks for prompt response..
I have original wall charger, and got a new cable from ebay. So I am hoping its equivalent to original charger. How can I debug if the port or battery is damaged.. any idea?
I left it on charge overnight yesterday. It was at 0, in the morning.. I left it on charge today before coming to office. i am expecting it to be at 0, when I go home.. When its connected to charger, its working normally (with 0 battery), but as soon as i remove from charger, it will shutdown..
Morning, when I was charging,
the battery monitor widget app showing Battery flow as "-600mA". I think this should be +ve while charging. the same app was showing status as "Charging AC plugged". I will try to charge my phone with the same cable and charger, if the phone shows +ve current flow, then, its deffinetly should be problem with the battery or touchpad right..
I wil test it in the evening.. and if its problem with battery or touchpad.. i will try to clean the TP and will try again.. Lets see how it goes
Ok so you have the original charger, great! And it boots into android/webos correct? It sounds like your A6 firmware might have crapped out or whatever it does to cause battery issues. Probably not bad battery if this happened rather suddenly, and its not a bad port if its booting and running while plugged, even if its not charging. . .so go here:
http://forum.xda-developers.com/showthread.php?t=2756314
and read it carefully! With this tool, you can do some really cool stuff including re-flashing the A6 battery monitor/control chip. It can (but might not) fix issues like this. Give it a try with a good cable and let me know what happens. Good luck!
einstein910 said:
Ok so you have the original charger, great! And it boots into android/webos correct? It sounds like your A6 firmware might have crapped out or whatever it does to cause battery issues. Probably not bad battery if this happened rather suddenly, and its not a bad port if its booting and running while plugged, even if its not charging. . .so go here:
http://forum.xda-developers.com/showthread.php?t=2756314
and read it carefully! With this tool, you can do some really cool stuff including re-flashing the A6 battery monitor/control chip. It can (but might not) fix issues like this. Give it a try with a good cable and let me know what happens. Good luck!
Click to expand...
Click to collapse
I rebooted to webOS, and TP charged normally.. now i updated to CM11, all good as of now.. Thanks for helping me..
only bad part is i disassembled, before booting to webOS
Aw dude....well hey it happens to the best of us lol. Now u know a lot more about ur tablet and i would still recommend reflashing the A6 and removing webos if u dont use it. Tptoolbox can also be "installed" by renaming the boot image .bin file to uImage.TPtoolbox and placing it in /boot on your android partition. This allows moboot to see it. Off topic i know but i thought you might be interested. Best of luck with the re-assembly!
einstein910 said:
Aw dude....well hey it happens to the best of us lol. Now u know a lot more about ur tablet and i would still recommend reflashing the A6 and removing webos if u dont use it. Tptoolbox can also be "installed" by renaming the boot image .bin file to uImage.TPtoolbox and placing it in /boot on your android partition. This allows moboot to see it. Off topic i know but i thought you might be interested. Best of luck with the re-assembly!
Click to expand...
Click to collapse
You can only install TPToolbox as described if you have removed WebOS.
shumash said:
You can only install TPToolbox as described if you have removed WebOS.
Click to expand...
Click to collapse
why is that?
einstein910 said:
why is that?
Click to expand...
Click to collapse
Because there's not enough room for both, and it's designed to run in the WebOS userspace. Don't even try it; I speak from experience.
einstein910 said:
why is that?
Click to expand...
Click to collapse
Because the boot folder is not big enough with the webOS uImage.
Fixed my Touchpad!
I had the same issue and just wanted to report what worked for me. My touchpad wasn't responding to any button pressing combos and even after sitting on the charger for two days, didn't want to turn on. After some google searching I found my Touchpad might be so dead that the charging circuity might not want to charge the battery and all the fixes were telling me to take apart the Touchpad and charge the battery directly. That's not something I really wanted to do. Then another person suggested to charge the Touchpad with a lower amp charger, so I plugged the Touchpad into an iPhone charger for about an hour. I came back, held the power button and home button - nothing. Tried power, volume up, and home - nothing. But then I held the power button and hit the home button ~10 times and then... the home button started blinking left and right. YES! I took the Touchpad and put it on the original charger, 15 minutes later it had the Low Battery Screen and another 15 minutes later, Cyanogenmod was booting.
I need help. When I try to transfer the Android files to the HP TouchPad using TPtoolbox, Windows says that there is an F drive that I have to format before I use it. In the tutorials, a drive labeled HP TOUCHPAD or something like that shows in Windows, and you can put the Android files inside of the ttinstall folder. Should I format the drive and if so, what format?
Oh sorry, I posted to the wrong thread.