BT SE DS980 VS HTC Daimond + Pocket music - Touch Diamond, MDA Compact IV General

I am now using HTC Daimond. I install Pocket music due to the functionality is much better than Window Media (OEM). However, when using Sony Ericsson Bluetooty DS 980 with the function Forward or Rewind and even play/pause in the bt, it did not work!!. Whenever these functions were used, the hand held will pop up with the Window Media.
Is there any way to disable Window Media so the Bt could connect directly to the Pocket Music? I was told that I need to find the plugin AVRCP for the Pocket Music. I tried to search but coul dnot make it.
Has anyone had the same problem like mine and what did you do?
Thanks in advance for your response
Remarks, DS980 is equiped with AVRCP

Does it work perfectly with inbuilt TouchFLO music player along with windows media player?Please let me know As I am thinking to buy it.
Thanks

krij said:
I am now using HTC Daimond. I install Pocket music due to the functionality is much better than Window Media (OEM). However, when using Sony Ericsson Bluetooty DS 980 with the function Forward or Rewind and even play/pause in the bt, it did not work!!. Whenever these functions were used, the hand held will pop up with the Window Media.
Is there any way to disable Window Media so the Bt could connect directly to the Pocket Music? I was told that I need to find the plugin AVRCP for the Pocket Music. I tried to search but coul dnot make it.
Has anyone had the same problem like mine and what did you do?
Thanks in advance for your response
Remarks, DS980 is equiped with AVRCP
Click to expand...
Click to collapse
Check this
http://forum.xda-developers.com/showpost.php?p=2419802&postcount=17

idonxda said:
Check this
http://forum.xda-developers.com/showpost.php?p=2419802&postcount=17
Click to expand...
Click to collapse
Please don't spread false information. As has been clearly explained in my dedicated article (http://forum.xda-developers.com/showthread.php?t=412519 ; it was a temporarily sticky in the General forum), this hack will ONLY help GSPlayer users.

krij said:
I am now using HTC Daimond. I install Pocket music due to the functionality is much better than Window Media (OEM). However, when using Sony Ericsson Bluetooty DS 980 with the function Forward or Rewind and even play/pause in the bt, it did not work!!. Whenever these functions were used, the hand held will pop up with the Window Media.
Is there any way to disable Window Media so the Bt could connect directly to the Pocket Music? I was told that I need to find the plugin AVRCP for the Pocket Music. I tried to search but coul dnot make it.
Has anyone had the same problem like mine and what did you do?
Thanks in advance for your response
Remarks, DS980 is equiped with AVRCP
Click to expand...
Click to collapse
ALWAYS make sure you KILL WMP in the background.

Menneisyys said:
ALWAYS make sure you KILL WMP in the background.
Click to expand...
Click to collapse
How could I Kill WMP? It might be stupid question but I really don't know. I try to seach for the Kill WMP Background/process but i could not get the answer. Please help

Menneisyys said:
ALWAYS make sure you KILL WMP in the background.
Click to expand...
Click to collapse
If there is a way to Disable WMP, that might be a that I want to try.
Thanks in advance for your reply

Pls advise
Until today, Pocketmind has not reply yet. Is there anyone know how control pocket music from BT DS980

Related

Please Help: HTC E100 Remote auto starts Audio Manager....

...but I want it to start Pocket Music 5 which is the player I use or even WMP. When I use Kaiser Tweak the default player only gives a choice between Audio Manager and WMP - how can I add Pocket Music to that to be able to select as default. However it does not matter which default I select using Kaiser Tweak as the RC E100 only operates the HTC Audio Manager.
Can someone please direct me to another possible registry entry that can fix this?
thanks guys
Didn't the remote only support windows media player?
no, doesnt support WMP. I tried to get it to run anything other than Audio Manager but as soon as you push any button on the remote unit, it starts up Audio Manager - regardless of whats running.
If I have Pocket Player running, the music is routed through the remote headset but it does not respond to any button pushes; again; it just starts Audio Manager.
Any suggestions? Is there a registry hack?
I'm in the same situation as you !
I contacted HTC, and they said the driver is developed to support only the Audio Manager. My contact having on the other phone a technician of HTC, I have asked to tell him to improve the driver to support other Media Player
But ... nothing moves ...
...bump..
anybody have any ideas please? or having same experience?
Cant believe there are only 2 of us with Kaisers using the new RC E100 headset?
I'm still waiting for mine
THough i like the audio manager
Leonsc said:
...bump..
anybody have any ideas please? or having same experience?
Cant believe there are only 2 of us with Kaisers using the new RC E100 headset?
Click to expand...
Click to collapse
I got mine yesterday, using WMP on my Tilt though. I didn't have to install the included driver.
I thought it was possible? how did you get it to work on WMP?
I tried calling HTC support but less than worthless....
The Tilt doesn't have the HTC Audio Manager, just WMP.
I didn't do anything other than plug in the remote, hitting a button then launches WMP.
Can anyone please give me a clue as to where in the registry to look - I'll play around this weekend and see if I can come up with something BUT can one of the hotshots on this forum PLEASE give me an idea of WHERE in registry to start looking.
HTC TyTN2 E100
Hello,
I know that problem too. Have you, at least, identify which HTC driver is used (name ?).
Maybe we may developp one ourself.
Cheers,
J
Hi,
I have both AudioManager and WMP and when I press play on the remote AM starts but when WMP is started first the remote controls WMP. I didn't install driver form CD.
But on the other hand it would be great to control other apps with the remote. I tried many programs to capture E100 buttons but no luck. Only phone buttons can be used. I configured TCPMP to use them as next/previous.
I think intercepting communication between E100 and kaiser would give us some idea how does it work - is it USB or some kind of pulsing through button line of the EXTusb.
Orange stock 6.0 ROM
rafgerm said:
Hi,
I have both AudioManager and WMP and when I press play on the remote AM starts but when WMP is started first the remote controls WMP. I didn't install driver form CD.
But on the other hand it would be great to control other apps with the remote. I tried many programs to capture E100 buttons but no luck. Only phone buttons can be used. I configured TCPMP to use them as next/previous.
I think intercepting communication between E100 and kaiser would give us some idea how does it work - is it USB or some kind of pulsing through button line of the EXTusb.
Orange stock 6.0 ROM
Click to expand...
Click to collapse
How I would solve this is to dump the register before pressing start and dump it after I had pressed start then use a comparing program and look up where in the register the change is made (triggered), then swap it whit the wanted program.
How I would solve this is to dump the register before pressing start and dump it after I had pressed start then use a comparing program and look up where in the register the change is made (triggered), then swap it whit the wanted program.
Click to expand...
Click to collapse
I'm not sure if pressing the button triggers any changes to the register. I was thinking more about taping into physical signals between Kaiser and E100 remote but this could lead to trashing the device in the process Or maybe someone asm literate will look into driver file using IDA to tell us what registry keys it points to.
rafgerm said:
I'm not sure if pressing the button triggers any changes to the register. I was thinking more about taping into physical signals between Kaiser and E100 remote but this could lead to trashing the device in the process Or maybe someone asm literate will look into driver file using IDA to tell us what registry keys it points to.
Click to expand...
Click to collapse
Everything is logged, by dumping before/after is like to see what actually happened, once you spotted the change you go in and study the area of register. No need for a integrated development environment on this one as we know that this is what kaiser tweak do; change youre register... I suggested to make the changes that the register is sorted to run whatever player of own choice. This is one of many ways to do just that. And after you know the changes you can cab it and save it for another rainy day.

AVRCP not working in PocketMusic and PocketPlayer !

Hi,
Have anyone noticed AVRCP buttons ( next/previous and play pause buttons) not working in Pocketmusic and PocketPlayer. But they are working perfectly in TouchFlo3d music player and also Windows Media player.
Any fix?
I found this problem too as I always played pocketmusic; now I play my mp3s thru audio manager cause I don't know how to fix it, sorry.
that's weird, hope somebody could throw some light over this issue
no fixes yet? nobody got a clue?
is there button mapping options in Pocket Music player?
Would be great if this could be fixed
i am trying to link different applications with AVRCP / A2DP though without luck...
it did worked on Tytn II , though the Diamond seems not to offer the possibility to control 3rd party Multimedi applic's
Coreplayer 1.25 ; no AVRCP - only volume control
Pocket player 3.6 : same as above.
WMP -on board : all works, but the sound output is less than the above
I will try to associate file extensions with other programs and report back if this would solv.
i guess only disabeling Touchflo might solve this temporarely as a work around.
I have same troubles with CorePlayer too
When I connect my DS-970, its controls TF3D player tab
I try to disable this tab - CorePlayer didn't work correctly too
but WMP did! (
Reg tak request
I posted left and right requests to tweakers to have a look into this but without luck yet.
Advanced Config (or boinger66 add-ons for Advance Config 2.1) should be the most suitable solution though.
If you guys would liek to post a few other direct requests (no new thread yet) someone with the required knowledge might come up with something ..
DS980 VS HTC Daimond + Pocket music
I have got the same problem. Now, I post my problem to Pocketmind support team already. They said, they will get back to me. Actually, I am not advance user and this problem should be a known problem, unfortunately, I tried to search on many web by using google, hopeless!!
If I got any feedback from the support team, will share
timn2087 said:
is there button mapping options in Pocket Music player?
Click to expand...
Click to collapse
There is option on the button mapping but it did not work with AVCRP bluetooth. It works on the handheld itself
Having same problem too.. have installed the WMP plug-in for Pocket player and enabled the workaround relating to play/pause for WMP A2DP in the config screen. However, still cannot use AVRCP to control Pocket Player from my Bluetooth car stereo.
Not a major issue, but it would be nice to get working as I've been impressed with PP so far and so will probably end up buying it.
Thx
M.
ceevee369 said:
I posted left and right requests to tweakers to have a look into this but without luck yet.
Advanced Config (or boinger66 add-ons for Advance Config 2.1) should be the most suitable solution though.
If you guys would liek to post a few other direct requests (no new thread yet) someone with the required knowledge might come up with something ..
Click to expand...
Click to collapse
I'm following this thread because I plan to buy a Touch Pro when it comes out in my area and I want PocketPlayer to work with the AVRCP on my new car stereo.
I saw from your post about Advance Config and I was curious if anybody tried setting the Default Music Player for the HTC Music Plugin setting? Does that help?
Advance Config can be downloaded here: http://www.touchxperience.com/
As I do not have a Touch Pro yet, I cannot test this, but I am curious about other's experiences solving this issue.
Until today, Pocketmind has not reply my question yet. May be, they could not figure out too. I posted my the same question in some other forum. One of the reply stated that I should find the plugin AVRCP for pocketMusic. Again, Until today, I tried to search in the google, I still could not find plugin AVRCP for pocket music. If anyone of you have a luck on this, please
thx1200 said:
I'm following this thread because I plan to buy a Touch Pro when it comes out in my area and I want PocketPlayer to work with the AVRCP on my new car stereo.
I saw from your post about Advance Config and I was curious if anybody tried setting the Default Music Player for the HTC Music Plugin setting? Does that help?
Advance Config can be downloaded here: http://www.touchxperience.com/
As I do not have a Touch Pro yet, I cannot test this, but I am curious about other's experiences solving this issue.
Click to expand...
Click to collapse
After I launch your above web, then, I link to
http://www.touchxperience.com/
I saw the "HTC Music Manager" function in the description that allow you to choose default music player in the link but when install, NO "HTC MUSIC Manager". So ridiculous
My old Touch was able to map the Hardwarebutton BT to Start/Stop, so i could pause/Play by pressing BT Sidebutton.
On the Diamond and on the old Touch this is implemented in 1-3 DLLs. As it is hardcoded in these DLLs - it is definitly not possible to "remap" these buttons :-(
I asked in the forum if it is possible to use the DLLs from the "old" Touch. ... No interesting feedback by now...
ratzefumm said:
My old Touch was able to map the Hardwarebutton BT to Start/Stop, so i could pause/Play by pressing BT Sidebutton.
On the Diamond and on the old Touch this is implemented in 1-3 DLLs. As it is hardcoded in these DLLs - it is definitly not possible to "remap" these buttons :-(
I asked in the forum if it is possible to use the DLLs from the "old" Touch. ... No interesting feedback by now...
Click to expand...
Click to collapse
Thanks for your info. Until today, nobody could solve this problem!!. I left this issue to Pocketmind and they said they would come back in 3 days. Now 10 days already. May be, they are also incapable to solve it : (
Same problem here with Mort Player on HTC Touch Pro (Raphael).
It seems, they changed the way BT stack interprets AVRCP commands, or hardcoded sending these commands directly to WMplayer, cause it is only think that works with AVRCP.
I hope this will be soon solved in some cooked ROMs.
johny.mnemonic said:
Same problem here with Mort Player on HTC Touch Pro (Raphael).
It seems, they changed the way BT stack interprets AVRCP commands, or hardcoded sending these commands directly to WMplayer, cause it is only think that works with AVRCP.
I hope this will be soon solved in some cooked ROMs.
Click to expand...
Click to collapse
If you hear about a cooked ROM that fixes this, please post it here!
I don't usually have time to comb through all the awesome stuff going on at XDA and would very much appreciate it!
Hi, is there a music player that can be controlled (next, previos, volume, play/pause) with the buttons on the stock wired headset? I can't use them in WMP and is very frustrating.
BT function for Pocket Music
Still no response from Pocketmind. Also, tried to search, hopeless.

Double-click and single-click?

I don't know how to activate double click function on my diamond.
Now when I single-click an icon it opens, starts or activates the clicked object at once.
I would like to be able to "highlight" the selected icon with single click and "open" it with double-click.
Just like every previous microsoft PC operative systems...95, 98, ME, XP, VISTA and so on.
Is it possible?
And also...Can somebody recommend a bluetooth stereo headset with microphone in that can play loud music with great bass?
It must be able to play extremely loud music with really powerful and deeeeep bass. Please?
Help greatly appreciated
I luuuuuuv my Diamond!!! *hugs*
Edit: I have searched the forum but couldn't find anything about double-click on the diamond. I KNOW HOW TO SEARCH...so don't tell me to do so please

BTMusic

I have installed this great freeware that enabled playing my phone MP3 music through the BT HandsFree in my car. I needed to add .NETCF2.0 to my device first in order to run it.
I uploaded .NETCF2.0 for your convenience.
http://rapidshare.com/files/14064108...tupv2.msi.html
I have this program as well.
I actually had it before the 6.1 update.
Yet, it still works as is.
Didn't have to add anything to my phone.
Why did you need to?
mzshortay said:
I have this program as well.
I actually had it before the 6.1 update.
Yet, it still works as is.
Didn't have to add anything to my phone.
Why did you need to?
Click to expand...
Click to collapse
Some of the recent cooked ROMs are cooked with .NETCF3.5, and that will deem BTMusic program useless. It will error out if you do not have .NETCF2.0 added to your device.
Haha.. got you!
As promised I will have a look at NETCF 2.0 and this bluetooth thingy seems cool as well. I will test.
Cheers Asfoor.
asfoor said:
Some of the recent cooked ROMs are cooked with .NETCF3.5, and that will deem BTMusic program useless. It will error out if you do not have .NETCF2.0 added to your device.
Click to expand...
Click to collapse
Hi,
what is this software bringing more that standard feature (when I use my Bt headset with S2P for example, it resumes after a call etc)? I don't know BT tech so well, just got my S705, I would be happy to know if this soft can make my BT life easier .
deuzeff said:
Hi,
what is this software bringing more that standard feature (when I use my Bt headset with S2P for example, it resumes after a call etc)? I don't know BT tech so well, just got my S705, I would be happy to know if this soft can make my BT life easier .
Click to expand...
Click to collapse
It will only help in playing your phone music & songs through your car hands-free BT Device. I have not tested it if it works on the hands free headset yet. It is very easy to use, just enable it when you are in the BTMusic program, click on music player and the music should play through the BT Hands Free device speakers you have in your car.
Hi @ all,
is this tool also scrampling the sound like a big hall or a trashcan ?
All tools i found since today make this horroble sound.
Maybe, theres a trick for Kaiser ?
If i handish disable first the profile "BT-Headset" in settings, enable BT, enable the profil again it works with nice sound.
haiopei said:
Hi @ all,
is this tool also scrampling the sound like a big hall or a trashcan ?
All tools i found since today make this horroble sound.
Maybe, theres a trick for Kaiser ?
If i handish disable first the profile "BT-Headset" in settings, enable BT, enable the profil again it works with nice sound.
Click to expand...
Click to collapse
Does not hurt to try t and let us know how big the trash can is?
I know BT has issues w/ the kaiser if your trying to use the wi-fi connection.
Mines doing this weird thing where my volume gets muted lolz... always something.
Does this also work with CorePlayer audio?
Hi all,
My BTMusic expried on October 1st. Please kindly advise what I can do at this moment. Thanks a lot!
I don't use it for playing music through my car hands-free, because the music sounds [email protected] and the hands-free can only play it in mono. But I do use it to play the audio from TomTom 6 through the hands-free, which is very useful.

Sleep after X minutes when listening to music

Hi, Im using the touchflo integrated music player, its fine for my needs, it only lacks the function, where it turns off after lets say 30min. I listen to music while falling asleep...
I know gsplayer can do it...some other maybe also.
any trick is appreciated. I prefer a utility, not a different player. Thanks
I have the exact same problem. Are you also using S2U2 (slide to unlock app)? Because I first thought the problem might be there.
but how to make the earphones come out your head after 30mins... thats the real problem
@rumple: Yeah...I find myself in the morning with them around my neck
I dont care I just dont want that the phone plays the whole night.
I would suppose to try Mort Player. It has a sleep-function. You can set the time after that playback will stop. But its not as stylomatic as the original Diamond-player.
skarrr said:
I would suppose to try Mort Player. It has a sleep-function. You can set the time after that playback will stop. But its not as stylomatic as the original Diamond-player.
Click to expand...
Click to collapse
The original poster asked for an utility, not a different player.
I am in the exact same situation, I love the TouchFlo player and don't want to launch an other program and would totally like the sleep function.
It's fun because the FM radio has the feature but the TFPlayer does not.
I even tried to set the radio sleep timer and mute radio, but it doesnt stop the tf player...so it doesnt turn off
psshutxp has an option to reboot the device at a specific time... maybe this helps
stegg said:
psshutxp has an option to reboot the device at a specific time... maybe this helps
Click to expand...
Click to collapse
+1
That's what I use. Still no solution to damn near choking myself with the headphones by the time I wake up tho...
stegg said:
psshutxp has an option to reboot the device at a specific time... maybe this helps
Click to expand...
Click to collapse
But does that also disables the sound to go off when the phone goes into sleep mode?
I use Mortscript to do this.
This script turns off the TF3D build in player after 60 minutes.
If interested, I can send you the script, you can download mortscript itself via here:
www.sto-helit.de/modules/edito/content.php?id=38
I would try it! Please share the script!
Thanks

Categories

Resources