Recommendations - Touch Diamond, MDA Compact IV General

Hey guys ive been reading the forum all last nite and this morning... Great stuff on the diamond. However mine will be delivered on monday morning and i was wondering what you guys reckon i should do about roms and tweaks. I want to get the best out of it from the start dont wanna be messing with it later. I am getting it from telsta on the next G network UMTS850 for the non aussies.
Ill definately be doin the registy tweak for TF3D. but have no idea on what other things i should do. Any help would be greatly appreciated.
Chris

Chris
read all that you can in the ROM section.
then make up your mind what you want on your phone.
Load up unsigned hard SPL like Olinex 1.40 and your ready to flash!
but be warned... once you start flashing it wont end with one or two, you will be flashing & flashing, then flashing some more until you find the ever elusive "Perfect ROM".
It all good fun though!
try Dutt'ys, Panosha's or Ct's they're all good chefs!
I'm in Sydney & all their ROMS work well on all networks

gtpete said:
Chris
read all that you can in the ROM section.
then make up your mind what you want on your phone.
Load up unsigned hard SPL like Olinex 1.40 and your ready to flash!
but be warned... once you start flashing it wont end with one or two, you will be flashing & flashing, then flashing some more until you find the ever elusive "Perfect ROM".
It all good fun though!
try Dutt'ys, Panosha's or Ct's they're all good chefs!
I'm in Sydney & all their ROMS work well on all networks
Click to expand...
Click to collapse
Ah, the perfect ROM. That's easy, that's...
Bepe's... *flashes*... Swiftblade's... *flashes* TLR's... *flashes* Panosha... *flashes* Dutty's... *flashes*... maybe Bepe's was better... *flashes*... Ah screw it.

I don't know about you guys, but I use the newest official ROM, thaht you can get in HTC e-club or from this web sitem, just just have to find it in other thread...
with the official ROM, I use .NET CF 3.5, advand config v.3 and Gsen.....
Its really satisfied outcome for me...
but I still wondering, how to make the calender show more than 2 event in the today screen TF3D...
and how to change the background picture in other tabs...
thanks...

should i use olinex spl version 1.37 or 1.93?
and is swift blade ROM good or should i get another one? Links to your favorite ROM appreciated. There is too much to choose from!!!!!

putradbm said:
but I still wondering, how to make the calender show more than 2 event in the today screen TF3D...
and how to change the background picture in other tabs...
Click to expand...
Click to collapse
The number of events on the Today screen can't be changed (yet). Just like you can't change the backgrounds of other tabs (yet). You would have known that after a bit of searching. A lot of people are asking the same things. Try and check in on this thread once in a while and wait for another big breakthrough. Until then I use SecondToday with the TodayAgenda plugin to see my events and have the best of both the TF3D and Today worlds.

Related

Here is a TMO Wing Original ROM with TouchFlo added

Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155...h_TouchFlo.zip
Click to expand...
Click to collapse
the linky is broke ...
watcher64 said:
the linky is broke ...
Click to expand...
Click to collapse
Fixed. Thanks
this is specially made for the wing?
Smilez_c said:
this is specially made for the wing?
Click to expand...
Click to collapse
apparently so ... the files downloaded are "WING OEM with TouchFlo"
mmm I'll have to try it later cuz right now i have the Touch-IT,WWE v1.1 UPDATED 10.09.07 I wonder if any significant difference
ok guys im giving it a try.... wish me luck ...
zacwhite15 said:
ok guys im giving it a try.... wish me luck ...
Click to expand...
Click to collapse
good luck............
Bad luck so far ......
looking at a bootloader screen and nothing else ...
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
Click to expand...
Click to collapse
I will try this rom now. But I still think that it is only included the TouchFlo, not the others app?
Is it possible if you cook a new rom based on the Wing OS like the version HERALD_WM6.0_4.17.07.12.PV? I have tried the Touch IT already but it could not compare with the .12.PV in general.
The biggest problem now is keyboard of Wing, it is different than 4350's keyboard. So if we can get the new rom with Wing OS, it is the best!
Thanks in advance!
Downloading now :] from the wifi across the street, this might take a while...
Please post asap guys how this works.
There are several questions I have:
Does this include ANY extra software?
if it doesnt include ANY, then is there a TF manager at least like touchflo 1.1?
Does this have the 6mb page pool applied to it?
It's the base tmob ruu, with touchflo. not bad but still way up on the mem usage since its the official ruu
i got it to install okay but i can't get touchflo started. there are no tf settings. it replaces the left soft key. some of the issues i read about before are apparent like clicking the "x" opens the right soft key.
reinstalling something else. GREAT JOB though and thanks for making this. i'll check it out again next release.
TF Settings are in the Programs Folder. It has the original page pool but, the quick page pool changer will still work. One thing I did notice though, the TF settings aren't checked but it does work for me. If it's not working, open the TF Settings and check 'Enable cube' and 'Enable Scroll'. Also set 'View mode' to 'TF default v4.1'. I'd hate to slim down the ROM and have it missing something that a lot of people use. If you want to customize the cube, open \Windows\BioTouch Settings. I will definitely be fixing a few things so post suggestions here. Don't expect any changes until next week though.
i couldn't find the settings dialouge in any folder. i went into the programs folder where all the programs are usually located (in the start menu) and then into all the subfolders, and couldn't find the settings. They were also not in the program files folder that i reached through file explorer.
Strange. it's all there for me. When I get home I'll flash back to the original RUU. Then reflash my version. Thanks for your input.
Almost the T-Mo ROM with Touch settings
Well it's almost what it says it is. Everything is there except for the basic T-Mo apps like Hotspot log-in, T-Zones and My5. Which isn't a bad thing becuase I don't use any of them, however it is the missing IM program, but again no big deal because that's available in th the forums here. All in all, so far I'm impressed.
is the keyboard layout correct??..other then that there will be no other reason to switch because some how i kept all my t-mobile files when i flashed to the touch it rom
Just a question. When i reflash, i normally cut out the customizing part. Is the touch-flo function a component of the "Customizing" function after a hard reset?

(Updated 23.11) Final Touch-IT v3.0 3 versions in one package for p4350

Ok guys, as I promised im releasing my final rom
EDIT: I added a RUU_signed.nbh as seperate download, its the full cube version, but beware, its only for those who have updatet their device
with hard-spl, for more info, scroll down to bottom of this post.
But please read
Dont do this:
Questions on why stuff has been removed, and why I didnt do this or that.
Questions related to ppl using WING, TERRA and other Herald devices then P4350.
Questions on other languages, there will be no other languages released
Remarks about disliking stuff in the rom, and w/e..I dont care what you like or not.
Remarks on that previous roms are worse/better then this one
Remarks on that some ppls recooked versions of my roms are better.
Stick to posting about what is in the rom, not what is left out.
Dont ask how to flash this, its in the Touch-IT folder as a read me.
------------------------------------------------------------------------------
Ok this is final version of WWE Herald P4350 based on kaiser OS build 18125.0.4.2
No screens, there is no big diffrence in apperance.
You get 3 versions
Full with Touchflo and the cube
Full 2 with Touchflo and no cube
Lite with TouchFlo and no cube etc
This is whats in them:
Full:
Touchflo w/cube
TF-Settings
Touchflo settings 1.22
HTC Home 2.0.814.722
Comm Manager 6 tabs
RomSettings
ArcSoft MMS 4.2.8.1
Battery Status 218
Glossy Black Bars
Hibernate
HTC Network Wizard
HTC X Button 1.5
HTC Album
HTC TouchDialer
Magic SS
PIM Backup 2.5
SMS Backup
Total Commander 2
Touch-IT skin to WMP
Adobe Flash Lite
Full 2:
Same as Full, but without:
TF-settings
Touchsettings 1.22
Cube
Lite:
Touchflo, no cube
Comm Manager 6 tabs
ArcSoft MMS 4.2.8.1
HTC X Button 1.5
HTC TouchDialer
Removed from all roms:
Transcriber
Live messenger
Unusefull gifs, but some are still in
Ringtones
Default themes
jpgs
pngs
htc regedits
Tweaks
Disable sms sent
Today items removed (Not calendar)
Sliding sound off
Backlight set to 25 on keyboard
Hide SIM contacts to avoid duplicates
Security set to OFF
And other tweaks, but thats Touch-IT secrets
NOTE:
I dont have the p4350 anymore, so I could not test the roms with touchflo and no cube.
But they should work
Instructions how to upgrade is in the Touch-IT folder.
READ IT.
If you dont, you will spend even more time infront of your computer flashing the official ruu before trying again, why waste time, use 1 min to read and understand.
Remember:
If you dont like what I have added, or what I have removed or w/e please dont spam this thread with lame comments.
Disclaimer:
I take NO responsebility if you brick your device, if you do search the forums before you come flaming me/us here at XDA.
IF you brick your phone (Brick=the phone can be used as a building brick, or maybe a paperweight? Because you cant start it up.) Its no others fault but your own.
Mainly the reason for bricking a phone is:
1. Not reading the instructions good enough
2. Not following the instructions.
3. Not having a RUU that can unbrick the phone (the official installer with the official rom for your specific phone, with your phones default language. In.ex if yu have a german phone by default, you need a german RUU, if not you will get invalid vendor error)
4. Not reading the instructions good enough..again
5. Not following the instructions...again
If you dont understand after reading CAREFULLY, then dont bother flash your device with this or any other rom.
Download:
Sendspace
Megaupload
DOWNLOAD RUU_SIGNED.NBH - ONLY FOR PPL WHO HAS UPDATED THEIR DEVICE WITH HARD-SPL, FOUND HERE
DO NOT SPLIT UP AND POST THIS PACKAGE IN SEPERATE FILES.
Wow, dude. Awesome. And just in time for me buying my P4350 monday (or tuesday possibly). Not having tried flashing before (but already having read the instructions several times, even though I haven't actually got a phone to do anything on), I don't know the quality of your roms - yet I presume from what I have read that they are quite good indeed.
So thanks for your work on the roms, even though the P4350 isn't exactly new.
Just out of curiosity, is it WM5 or WM6 it's built upon? I can't seem to locate that fact anywhere in your post, but I might have overlooked it for some mysterious reason.
EDIT: It seems I was a bit too quick to post the latter about me not finding the information. I googled a bit and it seems that Kaiser OS of that build mentioned above is indeed WM6. So I guess I answered my question myself
EDIT 2: First (or well, second), I guess?
glad to hear that you're still doing work for us. I can't wait to put this on my phone.
thanks mucho.
debdrup said:
Just out of curiosity, is it WM5 or WM6 it's built upon?
Click to expand...
Click to collapse
ITJE said:
...OS build 18125.0.4.2
Click to expand...
Click to collapse
from that, i'd gather that it's WM6. Same as Toutch-IT 2.3
At last!
I am so excited while dowloading the files.
This is the best way for saying bye!
Itje, we will certainly miss you.
Regards,
when the german translation will come?
mxstyles said:
when the german translation will come?
Click to expand...
Click to collapse
never, there is a german version based on the official. There will be no other versions of german or other languages on this build
itje said:
never, there is a german version based on the official. There will be no other versions of german or other languages on this build
Click to expand...
Click to collapse
well, i have flashed the german version, but i can't use the cube in this build.
can you say me how to use it?
mxstyles said:
well, i have flashed the german version, but i can't use the cube in this build.
can you say me how to use it?
Click to expand...
Click to collapse
No
Stick to posting about this rom.
Dont reply to this, and dont post other stuff then about this rom.
thx
Hm, maybe this should be stickied. Easier to find it, as it seems to be the final version ever to be released.
I am however curious, itje. What if bugs pop up, will you be fixing those? Depending on their size and reach of the bug, of course.
hello itje,if i found a language pack french,with these release,work??
maxpaynemafia said:
hello itje,if i found a language pack french,with these release,work??
Click to expand...
Click to collapse
Well, it might work. If you find a language pack that works on wm6 then it might. Why don't you try it out? Just make a backup, flash, see if it works, flash back to your current rom and restore your backup. I'm sure it can't be that hard.
UAHUUUUU
I love the "READ ME-How To Upgrade" file
I love the new (light coloured) splashcreen and theme
I love everything man!
It is dumb saying so since it is the last version but this is the best release!
Installation went smooth! I really hope that this time everybody reads carefully the readme file since the package has the select OS feature.
Itje, come back to the herald whenever you want. I read somewhere that kaiser was way worse than Herald... I would think it twice
Great rom itje... I've founda little bug that becomes annoying when using CommManager: when I try to slect Settings -> Wireless lan nothing happens :?
BRSG said:
Great rom itje... I've founda little bug that becomes annoying when using CommManager: when I try to slect Settings -> Wireless lan nothing happens :?
Click to expand...
Click to collapse
I dont know what cause that, I used this rom before I sold my herald. And I used wireless lan settings with it.
Weather problem fixed
tesorero said:
I love the "READ ME-How To Upgrade" file
I love the new (light coloured) splashcreen and theme
I love everything man!
It is dumb saying so since it is the last version but this is the best release!
Installation went smooth! I really hope that this time everybody reads carefully the readme file since the package has the select OS feature.
Itje, come back to the herald whenever you want. I read somewhere that kaiser was way worse than Herald... I would think it twice
Click to expand...
Click to collapse
thx
Kaiser way worse? Never heard sutch bull****
My tytn2 is the best device/phone I ever held in my hands.
So does this rom have the keyboard and stuff working correctly? I think it was a problem in the past, if I remember right. Just curious because I just had to hard reset my phone because it's being stupid, so if this rom is (close to) bug free, I will probably flash to this instead.
mikeybags said:
So does this rom have the keyboard and stuff working correctly? I think it was a problem in the past, if I remember right. Just curious because I just had to hard reset my phone because it's being stupid, so if this rom is (close to) bug free, I will probably flash to this instead.
Click to expand...
Click to collapse
If you have a P4350, and its default language is english. There is no issue
What messed up with soft keyboard was the softkeyboard from touch dual, and I didnt include it in this release.
If you want it, get the cab. The same applies to other programs that ppl wants that is not in this release.
itje said:
If you have a P4350, and its default language is english. There is no issue
What messed up with soft keyboard was the softkeyboard from touch dual, and I didnt include it in this release.
If you want it, get the cab. The same applies to other programs that ppl wants that is not in this release.
Click to expand...
Click to collapse
To be honest I don't really know what touch dual is, so I'm sure I could do without it. I've been running the regular t-mobile rom with just the page pool change and a few programs (htc home, etc), and suddenly started getting this problem where my send button didn't work right and my phone would make some weird noises. I just did a hard reset and it seems to have fixed that, so while I'm at it I might as well add a nice new rom.
I know you've been working on roms for quite a while here, and I was holding off because of not wanting to re-do everything, but now since I had to start fresh, I might as well add something like this.
Thanks for all of the hard work you put into this stuff. I'm definitely going to give it a try.
mikeybags said:
To be honest I don't really know what touch dual is, so I'm sure I could do without it. I've been running the regular t-mobile rom with just the page pool change and a few programs (htc home, etc), and suddenly started getting this problem where my send button didn't work right and my phone would make some weird noises. I just did a hard reset and it seems to have fixed that, so while I'm at it I might as well add a nice new rom.
I know you've been working on roms for quite a while here, and I was holding off because of not wanting to re-do everything, but now since I had to start fresh, I might as well add something like this.
Thanks for all of the hard work you put into this stuff. I'm definitely going to give it a try.
Click to expand...
Click to collapse
so when you got the t-mobile version, I assume you got the wing?

Manila 3D .cab...Help please !!

Hello Seniors,
I have a Tytn II with normal Rom version 3.29.707.0 WWE
Radio Version is 1.65.16.25
I am very new to this ROM cooking & flashing thing but it looks amazing & interesting to see how you make your devices look mesmerizing with all those features that you work upon. I read few instructions about how to install these cooked roms with RUU files..But due to lack of knowledge & experience, it doesn't seem to be working for me. I am looking forward to a Manila 3d or 2d rom's .cab file which comparatively is easier to install. Can someone please help me with a file or a link from where i can get a working Manila or any other Touch 3D rom's .cab file that i can use for my Kaiser..Your help will be highly appreciated.
I found one working .cab file for Manila 2d but it doesn't work in landscape mode.
here u go
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
looking for a quick fix will almost always get you nowhere. Try clicking on the link titled "For all the people that want a cool phone" in my Sig and read the post.
Thanks !!
Thank you all for your response as it really was helping. I appreciate your views about the journey. Not just getting the meal served on table rather also to know how it is being prepared in the kitchen & what's it all about ! Will definitely keep up my research & will try to make most of it. Please keep helping & suggesting as it really helps. I know it's not sumthing that you're here for. But again if u spare some time for queries that u feel r considerable it'd be great. And yes i've gone thru the link : http://forum.xda-developers.com/showthread.php?t=465507 and tried to make it work on my Kaiser..But Touch-Flo 3d was not initiated even after flashing on screen again & again..I got the Second start up & Diamond Album work though..But didn't see Manila 3D working even i tried installing files in my device memory as specified serial order :
TF3D-QVGA
Opera
HTC AudioManager by Swtos
TF3D Standby
Touch Response
HTC-Diamond-Album
Manilla 3D landscape
Please help if anything needs to be done apart from these !!
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
It Worked
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
vicky_crispy said:
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
Click to expand...
Click to collapse
Glad you got everything working, but obviously when you download a lot of crap that wasn't meant for your phone onto your phone,to make it look cool, it uses a lot of resources. While TF3D looks really cool and everyone here has done a great job porting it to our Kaisers, I still think that M2D gives you a lot more " bang for your buck " with fewer problems and fewer needed work a rounds.
RESULTS
Well i agree Denko that this feature is not meant for Kaisers by default. But by using certain means & making them work is what "Development" is all about. I understand there's a price for everything that we do. And after all d research & experiments that i did with my Kaiser..Its not the "Kewl" thing neither the 3D effect that is making me go crazy but its simpy the efforts & the result that i finally derived through them which again has inspired me that i can go ahead & experiment and maybe create new things too. And I can understand on thing for sure, that for a technology freak, There's no end to modifications & development as it's an on-going process.You've yourself been a part of same thing for a long time now i guess, But for me its sumthing i've stepped upon, So i'l take my time & maybe react too. Though you might find it too small to react & childish too, But datz d way it is. Thanks once again for your wise help & suggestions. Now next thing i'd wanna do to my Tilt is Flash a ROM in it..Maybe by next week. And that's sumthing i'm li'l scared of because i dnt wana cause harm to my device at d same time. And even after reading tutorial, M nt getting it worked as my phone gets disconnected from USB mode as soon as i start burning a ROM. Also i dnt really know how to get a HARD SPL 3.56 on my device. I tried that but it didn't work too. Is there some video tutorial that gives a sneek-peek into the action. Anyways i think m going too fast for that, And there's no hurry. So what are you working upon these days ?? And what do you do ?
Clarify & help please ???
kaiserII101 said:
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
Click to expand...
Click to collapse
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
<~THANK YOU~>
fiyaburnz said:
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
Click to expand...
Click to collapse
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
vicky_crispy said:
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
Click to expand...
Click to collapse
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
How to get -G- Rom ???
kaiserII101 said:
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
Click to expand...
Click to collapse
Sir,
thank you for your suggestion. But as I've mentioned in my previous Replies, I am a rookie when it comes to Kaiser or ROM cooking & flashing. So i tried to flash some ROMS in my Kaiser but it failed. I mean my device is connected to my PC thru USB..And then i go thru those normal RUU file initiation screen too. But as it turns into 3 color screen & status shows "0%", It gets stuck right there & gets Disconnected from the USB connection !! And what about HARD SPL...How can i get it done to my Device..Specially with the configuration that i have on Kaiser. Because like i mentioned, I try to flash things through RUU..My phone gets disconnected frm USB ?? And wanted to resolve the query that DO our phones come with a HARD-SPL already ?? What is it actually & Hw can we check if its there on our device already or not ?? I tried by pressing both the "SOFTKEYS" at the same time..all that happened is that my phone screen got locked (Normal screen-lock)..I also tried pressing CAMERA & POWER buttons together for almost 30 seconds..Nothing happened Well these threads help me to an extent as i keep reading. But if there's some specific directions that i can get specific to my query. It might help..Or maybe if there's a Video-tutorial. Plus if you are getting what actually my problem is..I mean with the device..like if there are some specific files that i should use for it to get working..Please attach the links if you would. Because i did check the video of Touchflo 3D manila on Youtube & it was quick out there !! Also i installed some Kaiser tweaks (KaiserTweak-nikagl-20080613-1711) as i read in a thread installing tweaks make Kaiser speed up a lil bit when using Manila 3D..But the Touch-Incall-Screen-Tweal seems to give some trouble as the incoming call screen gets stuck..It did twice today morning. So i have un-installed those tweaks !! So if there's sumthing that you think might get my device a li'l boosted up along with Manila 3D..Please refer that too !! I'l try to flash a ROM once i receive your response about how & which version of HARD SPL will b fine for my Kaiser..And how can i get it on my device ??
Your reply will be awaited & appreciated.. Thanks in Advance
Flashing Your First Kaiser Rom (For Noobs)
click the link stylez posted, don't be embarrassed, I was there about 6 months ago
vicky_crispy said:
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
Click to expand...
Click to collapse
no prob i used it and it worked fine for me i just switched back to 2d about 2 days ago and im already thinking about going back to 3d
installing M3D really makes my Kaiser slow. i installed M2D instead and installed M3D skin i dont have any problem w/ it right now
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Flashed GK.10.Final Rom
kaiserII101 said:
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Click to expand...
Click to collapse
Hey Senior..Than'x for all your support & guidance..I flashed Garmin's version 10 final rom on my Kaiser yesterday night..I had a li'l fear in my mind before i initiated HardSPL 3.29 & then Flashing GK.10.Final on my phone but all that happened very smooth & gave my device an all new look. Now what i am wondering is that how can i use Manila 3D or should i say 3D interface on my Kaiser. Or i must say you advice me what will look the best on my Kaiser. If you have any roms or suggestions upon what can i do post installing -G-'s rom on my kaiser..Or is it the complete package within itself..Please do advice me regarding this..I really would like to move on to the next level..Its really adventurous..Cheers to y'all !!
Regards,
Vicky
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
SUCCESS !!!
kaiserII101 said:
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
Click to expand...
Click to collapse
Senior I used the TF3D files in the .rar file as you mentioned in the post yesterday night itself as the excitement was too high & it was too hard to stop..So i worked upon my Kaiser till the morning & uploaded TF3D Manila. To my wonder the Incall Tweak was not required this time as the phone didn't freeze on incoming call. Earlier it didn't use to display caller ID as it was left hidden begind Manila Interface..But not anymore. I also used some additional tabs like the Additional 3 tabs, Call Log, Calendar & Command manager tabs. I also installed S2U2 v 1.52 on my phone. And now TF3D Manila works on my Kaiser like the Nitrous in the car. Then i used Flash Format & formatted my 4Gig card as it got corrupted a li'l while back with the folders getting unaccessible with some strange signs & i was unable to format it using Pocket Mechanic. But finally everything is in place & working absolutely fine herre as i have installed some more programs using the other threads for Kaiser software..Will try & add some Pictures of Manila 3D running over Garmin's DK.10.Final ROM. Will cherish this ROM for sometime & then will try using something different & better on my Kaiser. You can advice what will be the next thing that i should do which will be fantastic for my Device !!
It would have never been possible without you guys who work hard on development part & bother to help rookies like us with queries too. Gr8 job

So Confused Choosing which rom!!

Hi there... im pleased with myself for having dumped the stock ROM (4 Raws) and then going through the HSPL, which i checked is good!!
ive got my touch to use WiFi and not 3G when using the net at home even tho im on Orange Uk which is supposed to be set to 3g only etc
but i want to got WM 6.5 but am so unsure of which version to use... tbh i can seem to find out which release has what functions, no language stated as i read some where spanish or something lol!
i just see V12, V13 V14 to download etc no real explanations as to the content... Well not for a novice anyways..
so i know it may have been asked before but would someone (or many) please point me in the direction of something that is stable with no known major issues (such as wifi not working or something) and looks nice/fucntions smoothly...
if possible!
thank you so much to all that have helps via the modding topics and all those that reply here!
thanks!
Dave
A lot is down to personal preference
I have Jade Overloaded WM65 OS 5.21806 OEM 2.33.721.1 on my device, try it see how it goes if you don't like it try another.
go here http://forum.xda-developers.com/showthread.php?t=524102
can i simply put a rom over the top of the other then??
i am a real novice but trying to learn been on here hours going through dumping and the hspl... slowly but surely!
there are a few areas still im still in the dark about...
1) i regedit all the time on pcs and lappys etc but how do you on the fone?
2) still a bit vague on how to actually install the roms...
i have jade customRUU, but i read that was for just updating the splash and something else without installing a whole rom? i could be well wrong but im sure i did read that!
just not sure what to do tbh! lol!
thank you so much for your rom suggestion and if you could shed any light on my other qu's i'd appriciate it so much!
thanks again!
Dave
Yes you just flash it over old rom, its like upgrading a pc it wipes all personal stuff etc
to edit registry you need prog like total commander
go here http://forum.xda-developers.com/showthread.php?t=514406 you will find all you need to flash new roms on your phone
My advice for WM6.5 is to wait for the official Microsoft release, that is September 2009 (hopefully). All of WM6.5 ROMs on this site are beta, so they all have bugs. From all of them i'll recommend pdaviet's v14, but it's only my personal opinion.
If you still want to flash, just read this post
http://forum.xda-developers.com/showthread.php?t=514406
and knock yourself out!
Good luck!
thanks lex i went with flubs recommendation and while its great there are some things im not too keen on!
i love the wifi side of things and how thats a priority over using the 3g etc
still cant get the weather to function tho... as you say im sure things will improve once the official release comes
having same probs with weather myself.
like lex said all are beta and have some bugs, you just gotta find one your happy with for me personaly its Jade Overloaded WM65 OS 5.21806 OEM 2.33.721.1 the weather function is no prob I will sort it out hopefully but if not I can live with it I will just remove it from home screen LOL
yeah still working out how to do things... being my 1st wm system...
wanna change the order in start menu..
quick link/button to turn wifi on/off
change the homescreen both features and order...
change the background as that is a little disappointing lol
i was looking at the manila 2d is it? but seen so many people having issues with it im not sure i wanna install it!
lol lots of reading searching to do :-( haha!
If you flashed the overloaded rom I suggested then you have touch flo installed you need to go to settings / today items tab and select touchflo
if you wanna change order in start menu you can select and hold an item menu will opo up saying move to top
hi flub!
seems i was running with Windows Default... which i actually liked.. but if i select something else that deselects :-(
i just have touchflow selected and pressed ok... i like the layout gonna take some gettin used to! lol
i went to the weather options removed what was there and selcted add to be presented with a full list of towns etc...
selected the one closest to me.. it updated and is working!!!!
pitty the default wont work tho! will run with the touch system from now then!
thank you so much! your help/advice is very appriciated!
Dave
hey flub...
do you know how to stop the sms's appearing as a conversation?
i want recieved messages in the inbox not conversation files including sent and recieved stuff...
quite rediculous...
DJHicks said:
hey flub...
do you know how to stop the sms's appearing as a conversation?
i want recieved messages in the inbox not conversation files including sent and recieved stuff...
quite rediculous...
Click to expand...
Click to collapse
you can use a registry editor then navigate to the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\OEM\
Under the registry key, create a new DWORD value with value name as SMSInboxThreadingDisabled and set it value data to 1.
or here is a cab file to disable sms conversation http://www.ziddu.com/download.php?uid=a6uanZema7OelOKnZqqhkZSrY6ybl5mo6
Well Flub you truely are a star!!
fully appriciate all the help you've given me!
will most prob go for the cab hehe!
thanks again!
Dave
hi
thanks i was looking for such a cab i used to use advanc configurator to disable my thread view this makes it easier thanks for the same
flub said:
you can use a registry editor then navigate to the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\OEM\
Under the registry key, create a new DWORD value with value name as SMSInboxThreadingDisabled and set it value data to 1.
or here is a cab file to disable sms conversation http://www.ziddu.com/download.php?uid=a6uanZema7OelOKnZqqhkZSrY6ybl5mo6
Click to expand...
Click to collapse

Att fuze-wm6.5 driving me nuts

I have n unsuccessfully tried 4 times to put on various betas of wm 6.5 on my fuze but each time i end up having to go back to the one i had previously. can anyone please point me to the latest and stable 6.5 ?? Thanx to all.
duuuuudddeee!!!!
ummm...and what makes you think that this is the correct forum section for posting about the fuze? see the top-most bar on this page...see the place on the top-left where it says "xda-developers > Kaiser > Kaiser general"?
use that same bar to navigate to the "ROM Development Section" of the relevant forum section for the fuze (also known as the "Raphael")!
niksha said:
I have n unsuccessfully tried 4 times to put on various betas of wm 6.5 on my fuze but each time i end up having to go back to the one i had previously. can anyone please point me to the latest and stable 6.5 ?? Thanx to all.
Click to expand...
Click to collapse
Are you really trying to put a Kaiser rom on your Fuze ? After you brick your Fuze, can I have it. ?
We should just take it from him, endangering a piece of good tech..
Someone call the Gadget police.
Sometimes i wonder if the average smartphone is smarter than the average smartphone user?
Dibs on your brick
I have the Energy Rom 3.0 and I must say I have only found 1 bug (the contacts display on the dialer screws up when u scroll. Bust that is THE rom to flash if you want stability, speed and reliability. I really dont have anyother to recommend, Ive never had the need to replace my rom. I hope this helps. and...if your looking a Rom for the kaiser and accidentally called it fuze..man im having trouble finding a good rom for the kaiser with 6.5 myself, They told me that PDA Corner Ultimate-X2.V10 was a good one. So there you go.
Deleted... wrong post.
All is Forgiven
ChumleyEX said:
You are not excused..
He gave him info on a fuze ROM to begin with and then mentioned a kaiser one. Please read before downing someone. Ty
Click to expand...
Click to collapse
You beat me.... was trying to delete my post before you posted this message.
welcome

Categories

Resources