Database Develop

Backlight wont go off ....

i have set the back light to turn off after one minute in external power.
usb sync cable connected to pc and back light will go dimmer in one minute but not complete off.
anyone has this problem?

this seems to be the new behavior of the TyTN II vs. the old TyTN: The back light never goes completely off. You have to push the power button to put the unit in standby. When I listen to music, for instance, I want the backlight to go off to save power: I must push the power button to turn off the backlight. The music still plays, which is nice...
Anyway I'm not sure what to do about it when it's connected to a computer to sync, since pushing the power button would likely interrupt the sync. It doesn't bother me that the backlight doesn't go off.

Hi
I'd go as far to say this is the new behaviour of Windows Mobile 6. The Toshiba G900 was exactly the same. It is possible to get a small app to turn the backlight off completely however when it's connected to your computer via USB it isn't drawing power from the battery but from the computer so it doesn't matter, and it's just show you it is still on.
Regards
Phil

8525 running Black Satin WM6 doesn't do this, I don't think it's WM6

rite i dont mind the power consumption, but i cant go to sleep with the light on next to me, i like it off completely to save screen life too.

Hi
8525 running Black Satin WM6 doesn't do this, I don't think it's WM6
Click to expand...
Click to collapse
With all due respect that is a cooked ROM and will not need to follow WM6 best practice or MS guidelines.
I think this happens with the Kaiser (like it does with the G900) because the LCD isn't transreflective. With a transreflective device, even in normal room light you can usually see what is on the TFT display, so the device can time out the backlight completely turning it off, and you still know it is powered on but just the backlight has gone off. With a non transreflective screen like the Kaiser, if the backlight did go off completely while the device is still on, you can not see anything on the TFT screen, so it looks completely off, but it isn't. So I think the dimmed backlight is so you know it is still on by being able to see something on the display.
You can see this happening on battery power. If the backlight is timed to go off before the device powers down, it doesn't go off completely but dims, then shuts off completely when the device goes into standby.
but i cant go to sleep with the light on next to me, i like it off completely to save screen life too.
Click to expand...
Click to collapse
You have a few options:
1) Power off the device.
2) Press the standby button.
3) Turn it upside down or cover it.
4) Download this application that will let you turn off the backlight completely. http://ppcsoft.narod.ru/english/
i like it off completely to save screen life too.
Click to expand...
Click to collapse
This will be making little different to your screen life. The backlight is made up of white LEDs, these will have a lifetime of around 50,000 to 100,000 hours (more when used at a dimmed setting) so will easily outlast the device even if running non-stop from the day you buy it.
Best Regards
Phil

ic, as long as its ok for the screen life i am cool with it. thanks for the input.

PhilipL said:
Hi
4) Download this application that will let you turn off the backlight completely. http://ppcsoft.narod.ru/english/
Best Regards
Phil
Click to expand...
Click to collapse
This app would be good except that when you set the action to turn the light off in say 15 seconds it only does it the first time and then must exit itself because it won't do anything further until you reload it.
I need a program that stays resident and turns the light off after a set period of time. Pressing the power button isn't good enough because that stops a lot of apps running by putting the Kaiser into standby.
Anyone know of a program or fix?

The 8525 turned the backlight off no matter if you used stock or cooked ROM. The 8125 was the same way. Not until I got my Tilt did this "feature" arrive.

There may be some kind of a flaw in the programming. No, that never happens with a M$ program.
I was having the issue described in the thread, backlight stayed on. I played with my power and backlight settings and while searching for the answer my screen dimmed, even though it is connected via USB. I think if you go back and reset your backlight and power settings, that you will then see the desired effect on the PDA screen.
My settings:
Power= On Battery- 1 minute, On External- 2 minutes
Backlight Brightness= On Battery set to middle (half way), On External set to full
Battery Power Tab and External Power Tab- both set to 1 minute
The end result is that after 1 minute my screen dims to the lowest backlight setting. Screen is dim but I can still read what is there.

This is a very old thread, the backlight is always on because the Kaiser's screen is not transreflective like it's predecessor Hermes. If the light is out you will see nothing where you could with the Hermes. It's just the way it is with this model.

I have another question which it is related with the backlight and power off.
I tried to power off the phone by pressing and holding the power button. It asks me to confirm it. However, after the phone is "powered" off, it seems can be turned on by sliding out the keyboard.
Is it normal? or is it something to be fixed?
I have an ATT Tilt with stock ROM.
(just got it few days ago from ebay).
Thanks.

Down with new, weird "features"!
Lidberg said:
The 8525 turned the backlight off no matter if you used stock or cooked ROM. The 8125 was the same way. Not until I got my Tilt did this "feature" arrive.
Click to expand...
Click to collapse
If I read your sarcasm correctly, I am in agreement that this is a dubious feature. I think there are a number of changes from 8125&8525 to "8925" that are questionable. I wish HTC would spend more time getting the hardware and basic features working perfectly, and less time adding new programs just to change the look.

Transflective . . .
RemE said:
This is a very old thread, the backlight is always on because the Kaiser's screen is not transreflective like it's predecessor Hermes. If the light is out you will see nothing where you could with the Hermes. It's just the way it is with this model.
Click to expand...
Click to collapse
Everything I can find in searching says both the Hermes and the Kaiser have transflective screens, (as well as the 8125); e.g., from elite-electronics.com RE: the Tytn II: "color transflective TFT". [However, neither the 8125 or Tytn II have the technology that allows good viewing in daylight, like a Garmin Nuvi 350 or similar]
But if you can actually see something on screen on the Hermes when backlight is turned off, then that is truly different from the 8125 and the Tilt.

plchan said:
I have another question which it is related with the backlight and power off.
I tried to power off the phone by pressing and holding the power button. It asks me to confirm it. However, after the phone is "powered" off, it seems can be turned on by sliding out the keyboard.
Is it normal? or is it something to be fixed?
I have an ATT Tilt with stock ROM.
(just got it few days ago from ebay).
Thanks.
Click to expand...
Click to collapse
This is normal behavior. If you don't like it...download KaiserTweak.
Under the Keyboard->Slide Wake option you can disable it.

cushcalc said:
If I read your sarcasm correctly, I am in agreement that this is a dubious feature. I think there are a number of changes from 8125&8525 to "8925" that are questionable. I wish HTC would spend more time getting the hardware and basic features working perfectly, and less time adding new programs just to change the look.
Click to expand...
Click to collapse
Agreed. HTC - stop fixing what isn't broken in the first place.

cushcalc said:
Everything I can find in searching says both the Hermes and the Kaiser have transflective screens, (as well as the 8125); e.g., from elite-electronics.com RE: the Tytn II: "color transflective TFT". [However, neither the 8125 or Tytn II have the technology that allows good viewing in daylight, like a Garmin Nuvi 350 or similar]
But if you can actually see something on screen on the Hermes when backlight is turned off, then that is truly different from the 8125 and the Tilt.
Click to expand...
Click to collapse
Transreflective is NOT in the HTC TyTN II spec but is in the TyTN I spec. You can't believe a reseller.
If you turn off the backlight on a Hermes and then grab a big flashlight and shine it on the screen, you can then easily see the screen, the brighter the light the better you will be able to see it.
If you try this with Kaiser you will quickly see that the bright light will make it impossible to see the kaiser screen, no mater what backlight setting you choose, and certainly not on low.
It's a simple test and I'm convinced on what I say.
That said, the Kaiser's transmissive screen is super bright in most mid to low light areas since transreflective screens are normally not quite as bright as transmissives.

Resuming application with Power On

Probably a simple question but I use a GPS Golf program on my ATT Tilt. Between shots the power goes off on the Tilt and when I turn it back on the the main power button it goes to the home screen instead of resuming the application. It is driving me nuts. I suppose this is how it is supposed to work but is there a way so to have it resume where you left off in an application when you turn on the tilt with the power button?
Thanks
Darin

dj7675 said:
Probably a simple question but I use a GPS Golf program on my ATT Tilt. Between shots the power goes off on the Tilt and when I turn it back on the the main power button it goes to the home screen instead of resuming the application. It is driving me nuts. I suppose this is how it is supposed to work but is there a way so to have it resume where you left off in an application when you turn on the tilt with the power button?
Thanks
Darin
Click to expand...
Click to collapse
Try to disable the "Today Timeout" option in the the Today settings!!
Ciao

I have been playing around with the power setting so it doesn't go off so quickly, but there are still times I need it to resume where I left off on the phone when I use the power button. Seems odd that there doesn't seem to be a choice to just resume when powered on and not just go to the home screen... Any other ideas?

If you don't mind sharing...what is the name of this GPS Golf software? Thanks!!

Not at all. It is truly a great application that incorporates keeping score for all players in your group, side bets, GPS and shot tracking. It also has a desktop software to sync with. The name is it is Intelligolf. You can learn all about it at their website at http://intelligolf.com .
What really sold me on the tilt was the GPS. I purchased the Garmin XT software so my Tilt is my Garmin GPS for my car and is also my GPS golf device as well. Intelligolf offers course downloads for free. If the course you play is not listed you have to mark the points yourself which is very easy or you can do it via Googlemaps.
Very cool.
Darin

I was hoping it would give a picture of the hole. We have a golf course here with GPS in the carts, and it gives you pictures of the holes so you know exactly where everything is.

Unfortunately it does not. This one shows you the distance from where you are to all the points marked such as front-middle-back of green, sand traps and other hazards, etc... I at first wanted to see the actual layout of the course as well then saw the cost is very high on those kind of units. You have to purchase the unit and most of them charge to download each course (seems like some were $19.95 per course). Depending on how accurately you have marked the courses you play, it works just as well IMHO. I do love knowing exact yardage and the tilt seems to do this very well and locks in fairly quickly most of the time.
Darin

Well, I found a solution to my problem. I have SPB shell 2.0 on my tilt and in it there is an option for when you turn the power on. You can have it open to the now screen or not... I don't think there is an option in the default today screen for this..
DD

[SOLVED] Backlight doesn't turn off when using TomTom...?

TomTom v7.450
Diamond ROM v1.37.405.1 WWE
Can anyone else confirm that their backlight never turns off whilst using TomTom, regardless of what setting/timeout they've got on the device's Power config page? Whether I'm using it on battery or mains the result is the same - backlight remains on continuously. If I shut TomTom down I then see normal behaviour and the light turns off after the set time.
Interestingly, if I install the very same TomTom CAB on my M600/Prophet it behaves correctly i.e. the backlight turns off after a time. The device remains continuously on, regardless of setting, but then that's what I'd hope for anyway as TomTom is no use if the device is not active.
Given the above, has anyone got any ideas as to why this might be the case, and what I might be able to do to solve it? I really want the backlight to dim as it will save a considerable amount of battery should I be using TomTom on battery... and it would automatically turn it back on when it comes to advised turns etc.
Incidentally, the backlight does dim/brighten in response to changes in the ambient light level so that's at least something - however I tried removing this setting in case that was the problem but it wasn't.
Mathew

I also use TOM TOM on my Diamond..and I think that is normal that the backlight is on when using the navigato..also if you use the Stand Alone navigator the back ligt stays on!
I can't see the use of the navigator with the device in standby..you should buy a car charger so your battery recharge during the utilization of navigator

Backlight doesn't turn off when using TomTom...?
Click to expand...
Click to collapse
I have a question, can this problem co-exist with the problem of backlight turning off too fast when making a call, or do these two problems cancel each other ?

MJNewton said:
TomTom v7.450
Diamond ROM v1.37.405.1 WWE
Can anyone else confirm that their backlight never turns off whilst using TomTom, regardless of what setting/timeout they've got on the device's Power config page? Whether I'm using it on battery or mains the result is the same - backlight remains on continuously. If I shut TomTom down I then see normal behaviour and the light turns off after the set time.
Interestingly, if I install the very same TomTom CAB on my M600/Prophet it behaves correctly i.e. the backlight turns off after a time. The device remains continuously on, regardless of setting, but then that's what I'd hope for anyway as TomTom is no use if the device is not active.
Given the above, has anyone got any ideas as to why this might be the case, and what I might be able to do to solve it? I really want the backlight to dim as it will save a considerable amount of battery should I be using TomTom on battery... and it would automatically turn it back on when it comes to advised turns etc.
Incidentally, the backlight does dim/brighten in response to changes in the ambient light level so that's at least something - however I tried removing this setting in case that was the problem but it wasn't.
Mathew
Click to expand...
Click to collapse
this is a feature (and a good one) and not a bug. i bet you don't want that when driving, right before a big intersection yr screen go off....
for example,the igo (that's what i am using) give you the option to go by the device or all time on.

KukurikU said:
this is a feature (and a good one) and not a bug.
Click to expand...
Click to collapse
If it was a feature I would expect it to manifest itself when installed on both the Diamond and the Prophet (given the common application) - the fact it doesn't suggests to me it is a 'quirk' (not necessarilly a bug) with the way it works on the Diamond. As mentioned, the backlight used to come back on when being advised of any directions etc and would remain until well clear of a junction so if it is a feature it's an unnecessary one!
Sometimes it is not convenient for me to use external power - when riding on my bike for example. And in such circumstances the high ambient light level used to be plenty sufficient for me to see the screen on the Prophet without the backlight being on - this is obviously great for conserving battery power as the light ranks as one of the highest power consumers.
I might see if the TomTom menu is still customisable and, if so, include the 'Backlight Preferences' icon that was present in versions of Navigator prior to v6.
Mathew

As mentioned, the backlight used to come back on when being advised of any directions etc and would remain until well clear of a junction so if it is a feature it's an unnecessary one!
Click to expand...
Click to collapse
interesting! didn't know that...doesn't bother the on\off of the screen while navigating in town (lots of instructions)? not sure i'll want all this flickering

Solved it!
In fairness, it seems that it is a TomTom quirk.
Specifically, the application has always (since I've been using it from v5) had a built-in setting for when to turn the backlight the backlight off (or, more accurately, when to allow the device to turn it off in accordance with your time setting) - the options being: 'Always', 'When on a walking route', 'When not charging' or 'Never'. The default being 'Never'.
However, since v6 the button to change this setting disappeared from the menus however given it is possible to customise the TomTom menus and, even better, to include icons from previous versions of TomTom (assuming the feature is still supported internally) I did the following to turn my backlight setting to 'When not charging'...
- Create a file \TomTom\SDKRegistry\TomTom.mnu in the root of the device
- Inside this file put the following:
Code:
MENUBLOCK|BLOCK_MAIN|BTM_DONE|
MENUPAGE|TASK_PAGE1|Main Menu|
MENUITEM|TASK_EXIT_APP|
MENUITEM|TASK_SET_BACKLIGHT|
MENUITEM|TASK_PAGE1|
- Now run TomTom and click the main screen - up will come a menu with two items in it - Exit and Backlight Preferences, the latter will allow you to configure exactly how you want the backlight to behave.
- Quit TomTom and delete the TomTom.mnu file - this will revert you back to the stock menus, but with the backlight setting (permanently) set.
Of course, this process can be used to configure your menus exactly how you want them however I don't know the keys for all the icons - only for those when I last dabbled in v5 - maybe if I can find some time I'll find the others (I haven't Google for them so perhaps these are now common knowledge) such as the MapShare functions that only came in v7.
The reason it the backlight worked as I wanted when installing the cab on my Prophet was because it still had my menu configs from v5 installed on it... d'oh!
I could be alone in wanting to be able to choose how the backlight is managed, but just in case there's someone with the same desire hopefully this'll be some use to you. It does of course beg the obvious question - why did TomTom remove this customisable feature?!
Cheers,
Mathew

youupy! drinks on you!
congrats and yes, i knew from the beginning that i can help you. dhaaaahh. lol!

Interesting, previous versions of tomtom allowed you to adjust the backlight settings within the application.
cant find it in TT7 though

KukurikU said:
doesn't bother the on\off of the screen while navigating in town (lots of instructions)? not sure i'll want all this flickering
Click to expand...
Click to collapse
On the contrary; they've handled it handle it very well.
Say you've got your backlight timeout set to 30 seconds then after this amount of time with no activity (direction instructions etc) it will turn the backlight off - you can still see the map outline in ambient light and, most importantly, can easily see the distance indicator to the next direction.
A few seconds prior to the next instruction the light will reilluminate, a few seconds later it will give the direction advice/distance etc and then once you're through the junction it will turn the light off again after 30 seconds.
Of course, when following a rapid series of instructions in, say, a built-up area then the backlight will stay on continuously - each instruction essentially resets the timer. It's only when out on the 'open road' with no isntructions for miles that you'd see the effect.
All said and done, when I've got access to external power I keep the backlight on constantly (that's where the 'Extinguish only when not charging' option comes in) but when I'm running on batteries I need all the power-saving I can get, not least given the limit battery capacity in the Diamond!
Rumpleforeskin said:
Interesting, previous versions of tomtom allowed you to adjust the backlight settings within the application.
cant find it in TT7 though
Click to expand...
Click to collapse
As mentioned they dropped the icon in v6 yet still supported the functionality internally - it's just that with no icon you can't change the setting hence the temporary icon-insertion method discussed above.
Mathew

What solution do you use to keep the GPS on ?

I use my GPS a lot and I want my GPS to be running in the background while it track logs. I am not the only person who needs the GPS to not go to sleep so there must be someone else who has found a good solution.
First I tried S2U with a option to not go into sleep mode selected. This work well but I have to have S2U launch of a hardware button and also had to slide after waking it up.
Then I started using AE button plus. Set on of my unused side buttons to turn off screen with single press. This was the best solution I found except it has made taking pictures very buggy.
So has anyone found a good solution to keep the GPS on while the screen is off keeping power consumption down ?

tytn2user said:
I use my GPS a lot and I want my GPS to be running in the background while it track logs. I am not the only person who needs the GPS to not go to sleep so there must be someone else who has found a good solution.
First I tried S2U with a option to not go into sleep mode selected. This work well but I have to have S2U launch of a hardware button and also had to slide after waking it up.
Then I started using AE button plus. Set on of my unused side buttons to turn off screen with single press. This was the best solution I found except it has made taking pictures very buggy.
So has anyone found a good solution to keep the GPS on while the screen is off keeping power consumption down ?
Click to expand...
Click to collapse
GPS on and Power down are contradictory... I measured that the GPS uses 120mA to run.
Anywho, PhoneAlarm will do it for me. I have a GPS Tracking profile (a day and a night one actually) and the phone never turns off when I have it set to those. Gotta be careful with it though, if you forget to disable it you'll find a hot phone with a low battery in your pocket later.
Have you tried to just set the settings to do it? It's not automated, but it's free. There was a thread on a program called BikeMobile which the author describes how to modify the registry to NOT allow the phone to go to sleep when a certain com port is active. I never quite grokked it, but perhaps you will. http://forum.xda-developers.com/showthread.php?t=387262

Thats going to be a nice and toastie phone all day.

Thanks khaytsus. I will try out PhoneAlarm and see how I go. I found the phone to be drawing only about 45ma when my screen was off. Just trying to find a rom to suit my needs at the moment. When I find one I will start to try to find a solution.

There are many programs like "trackme" which can log GPS and switch off screen for you. There are some standalone programs like "BlackMe" which can switch off just the screen and lock phone for you.

[Q] What do you do with Tasker

I installed Tasker a while ago, and have it doing a few things, but I see in different threads some people doing some really cool stuff, so I was wondering, what do you use Tasker for?

Just last night I figured out how to get it to tell me who is calling me if I have my headphones with a mic plugged in. The only other thing I've done is make auto-rotation turn on when I open Gallery and turn off when I exit.
Trying to think of other stuff to get it to do.

morehush said:
Just last night I figured out how to get it to tell me who is calling me if I have my headphones with a mic plugged in. The only other thing I've done is make auto-rotation turn on when I open Gallery and turn off when I exit.
Trying to think of other stuff to get it to do.
Click to expand...
Click to collapse
I like the gallery idea. Did you get the steps/profile from a site, or figure it out. I would be interested in it.

phlunkie said:
I like the gallery idea. Did you get the steps/profile from a site, or figure it out. I would be interested in it.
Click to expand...
Click to collapse
There's a Tasker Wiki that has some good profile ideas here:
http://tasker.wikidot.com/
Here's all the stuff I have setup through Tasker right now, haha:
- Phone brightness goes to lowest level from midnight-6am.
- Silent mode turns on when headphones are plugged in.
- Silent mode turns on when phone is positioned face down.
- Silent mode turns on, Wifi/GPS/BT turn off between 8am-5pm (when I'm at work).
- TweetDeck/Voodoo App start up on boot.
- Data usage check via SMS automatically at 6:30am every day.
- GPS/BT turn off when I'm connected to Wifi, turn on when Wifi is out of range.
- Silent mode turns on when FxCamera is opened.
- GPS is turned on when RunKeeper is opened.
- Auto-rotate is turned on when certain apps are opened.
Tasker is easily the best app I've bought in the Market. PowerAMP is a close 2nd. Haha.

KaLiBLeeK said:
There's a Tasker Wiki that has some good profile ideas here:
http://tasker.wikidot.com/
Here's all the stuff I have setup through Tasker right now, haha:
- Phone brightness goes to lowest level from midnight-6am.
- Silent mode turns on when headphones are plugged in.
- Silent mode turns on when phone is positioned face down.
- Silent mode turns on, Wifi/GPS/BT turn off between 8am-5pm (when I'm at work).
- TweetDeck/Voodoo App start up on boot.
- Data usage check via SMS automatically at 6:30am every day.
- GPS/BT turn off when I'm connected to Wifi, turn on when Wifi is out of range.
- Silent mode turns on when FxCamera is opened.
- GPS is turned on when RunKeeper is opened.
- Auto-rotate is turned on when certain apps are opened.
Tasker is easily the best app I've bought in the Market. PowerAMP is a close 2nd. Haha.
Click to expand...
Click to collapse
yea, I go to that website too. I use it to turn GPS on and off for certain applications. I also downloaded the profile from the wiki to locate my phone if i lose it.

I think I just got the idea from being frustrated that the gallery hides the pull-down bar. It's simple though:
New task>context>Gallery
Display>rotation>on
It automatically turns itself off without having to add an exit task. As a matter of fact, if you add an exit task to turn rotation back off, it gets stuck sometimes.
Sent from my SAMSUNG-SGH-I897 using XDA App

How large of a learning curve does this app take? Like first getting used to android OS took a little time, but didn't take to long. cause that is an app I'm really looking at getting
Sent from my droid SGH using Tapatalk

BlindSnipersInc said:
How large of a learning curve does this app take? Like first getting used to android OS took a little time, but didn't take to long. cause that is an app I'm really looking at getting
Sent from my droid SGH using Tapatalk
Click to expand...
Click to collapse
A lot of the basic things have very detailed instructions on the wiki.
Sent from my SAMSUNG-SGH-I897 using XDA App

I also have mine set up to turn on screen filter at night so I don't get blinded when I look at my phone.

Lets see... I never messed around with it too much but I got it to do a few things.
-When I plug in USB, it automatically opens the notification bar so that I can mount it. Not much, but it makes it that much easier.
-When a headphone is plugged in, I have set my media volume down low to protect my ears and it also opens up my music player app automatically.
-From 7:25AM until 2:28PM, my phone automatically enters silent mode for school.

I have only owned Tasker for a few days but already find it indispensable and reason enough to never ever touch a fruity phone again. In the past week I have set up the following on my phone, most of them home-brewed:
1) Screen timeout to 7s when phone placed screen down
2) GPS auto start in apps that need GPS - maps, navigate, places, tracks, etc
3) Set screen timeout to 1hr in certain apps where I am likley to spend more than 30s without touching the screen - internet, reader, NY times, dirty jokes
4) Launch music player when headset plugged it, kill it when headset removed
5) Two sets of night modes - Mon-Fri and Sat-Sunday. They do the same stuff but with different trigger times - all sounds and vibrations except ringer off, no mobile date, no screen rotation. There are few things that are more frustrating than fumbling for my phone while in bed in the morning only to have the screen rotate on me. Ditto for late at night when I might be using the phone in bed lying on my side.
6) Turn Airplane mode on two minutes after loss of service, turn it off two minutes after service is restored. Prevents the phone from pissing away battery when there is no service. Would have preferred to do that based on signal strength but my phone does not report that correctly.
7) Vibrate for all email and messaging apps I use. The developers of many apps do bonehead things such as ignoring the system setting for "Vibrate on notify". Therefore even though my profile #5 above tells the phone not to vibrate at night GMail, Handcent and others will happily ignore you and wake you up. I have set them not to vibrate, then intercept their notifications with Tasker and trigger a vibration from within Tasker. I only wish there was an OR setting for that, so I don't have to maintain separate profiles for each app
8) Wifi auto stop/start when I am near a home cell tower. I also turn off mobile data.
9) Call home mode when I text "Where are you?" to my phone. The phone auto-replies with its GPS coordinates and address.
10) Voice SMS toggle widget - the phone will read my texts to me, e.g., if I am in the car and expect to be there for a while.
Things I wish Tasker would do:
1) Correctly recognize busy/free slots on my calendar. I could then set the phone to mute every time I have a meeting scheduled on my calendar. This would reduce the chance of my phone singing to me in the middle of a meeting... I like big butts and I cannot lie... you catch the drift. The current version claims it can do it but the functionality is broken on my phone. Not sure if it is a custom ROM issue or a Tasker issue.
2) Toggle 2G and 3G. This is not Taskfer's fault, but I really would like to be able to switch to 2G every time Wifi is on, or while I am near a cell tower at work. The signal strength inside the buildings at work is pathetic and leaving 3G on drains the battery big time as the phone continuously tries to boos the signal
3) Some type of readout from the orientation sensors. Imagine all the stupid pet tricks we could do if we had access to orientation-based scripting. Disabling screen rotation wen the phone is nearly horizontal comes to mind. I think Screebl can do that but why pay $2 extra just for that when Tasker ought to be able to do it just as well.

I've had Tasker for a while, and generally like it. It is crazy-powerful, but also crazy-difficult to learn how to use it to its full potential.

right now, only a couple things I use it for but I plan to use it more:
-when I turn my car on and it connects to the BT, it will automatically turn on GPS, Pandora and turn up the media volume (in case it was turned down before).
-when I turn the car off, GPS turns off and Pandora closes
-When I'm at work, a different ringtone is enabled and all volumes is turned down.
-when I leave work, my normal ringtone is re-enabled and all volumes are back high.

I really love Tasker. My 2 main uses are
1. Between the hours of 10pm and 6am, Tasker mutes my phone. If a call comes, it sends a text message to caller saying that I'm down for the night. If it's an emergency, the caller will have other numbers they can call. If I get a text message, it sends a auto reply of some sort but if it deals with golf, it will turn up the volume and play a song from Caddie Shack. I don't want to miss out on an early tee time!
2. I use Macs and have a music service set up that plays music throughout the house using various Airport Expresses and speakers via Airfoil. Speakers that I'm always playing to are the outdoor speakers (I live out in the country so let it rip!). I use Tasker to control volume, change stations or music services (Slacker, Pandora, iTunes, etc) and other music/video related items. The main conduit being iChat on the Mac and Google Talk on my Android thus being within range of the wireless access point is not necessary. Using SL4A and Python on the Android with Tasker allows for some very powerful scripting to happen. This in turn gets sent to the Mac via Google Talk and converted to applescripts for controlling all the apps and devices. The best part is that it's very powerful but easy to program, inexpensive and most important. very very reliable! Try that with a Sonos or Logitech Squeezebox.
Ummm… maybe I should write up details about this setup...

how to change pandora station?
Sorry for the noob reply to such an old post, but have been looking all over these forums and elsewhere and just can't find the answer. How did you use tasker to change pandora stations? If not Pandora, any other Internet radio service would do. Eventual goal is to set up some presets in Car Home to select channels while driving in a single touch, and I can use whichever web service executes this function best.
Thanks!

TuneinRadioPro has a Car Mode Screen thst may meet your need, without tasker.
Sent via Monty Pythons Flying Circus