Database Develop

Help PLEASE caps lock indicator

I have modified the registry and added "EnableIndicator" with DWORD 1 and still cannot get this to work
I am using an o2 XDA mini s.
Any thoughts please

do you have CapNotify.lnk in your \Windows\StartUp\ folder ?
It should point to:
32#"\Windows\CapNotify.exe"
If you don't have that link / file there, then modifying the registry won't help
Lastly, are you checking while working with the hardware keyboard, or when using the on-screen keyboard? If you're enabling caps lock with the on-screen keyboard, the indicator won't show up... the on-screen keyboard will readily show caps lock is on, of course.

EnableIndicator doesn't work for me either
I have CapNotify.lnk in \Windows\Startup... it points to \Windows\CapNotify.exe
I created EnableIndicator in the registry with a DWORD value of 1
When I use the hardware keyboard, I get no indicator about caps/symbol status.
Any help?

Re: EnableIndicator doesn't work for me either
sashen said:
I have CapNotify.lnk in \Windows\Startup... it points to \Windows\CapNotify.exe
I created EnableIndicator in the registry with a DWORD value of 1
When I use the hardware keyboard, I get no indicator about caps/symbol status.
Any help?
Click to expand...
Click to collapse
Just out of the blue, did you soft reset after making your registry changes? Reg changes to a Wizard don't happen immediately, but are forced when you soft reset. Just hold the power button until a warning dialog box pops up, click yes to confirm shutdown, then click the power button again after its off to restart....Might help...

Caps Lock Indicator sometines having opposite effect?
I noticed sometimes that the "C" caps lock indicator sometimes seemed to be on when it should be off, and vice versa - thought it was probably like when a PC keyboard gets off in its indicators, and I'd do a soft reset and then it worked normally - but THEN I found this on a MoDaCo forum post (at http://www.modaco.com/Tip-See-Wizardand39s-Keyboard-Mode-t236896.html) and it all became clear to me:
"Hmmm.... maybe I'm doing something stupid, but it doesn't seem to be working properly for me.
I used BreakSoft's MobileRegistryEditor to edit the registry on my O2 XDA Mini S (with the O2 customisation removed as described at http://www.modaco.com/index.php?showtopic=...dpost&p=707087) <http://www.modaco.com/index.php?showtopic=235057&view=findpost&p=707087)>.
Now I'm getting the C and dot symbols... but the "C" appears when I'm typing LOWER case. That's not right, is it? :?:
Yes, I was doing something stupid. Why is it you always realise this immediately after posting...
Anyway, seems I had caps-lock turned on in the on-screen keyboard and this was reversing the effect of caps-lock on the physical keyboard..."[endquote]
So NOW, I know that if the "C" is behaving opposite of expected, it is because I left the onscreen soft keyboard in Capitals mode!!
Click to expand...
Click to collapse

How to change softkeys in touchflo?

Is there anyway to change or rename the two softkeys when touchflo is enable?
I use keyswop software but I think that only changes the default softkeys in windows not in touchflo.
TIA

Unfortunatly keyswop deosn't work on Diamond.....

Do you know which app. does

Edit Registry below, you can modify first page of TF3D Soft Key. I don't know about other page yet.
\HKLM\Software\HTC\Manila change value of each key (LSK for Left Soft Key, RSK for Right Soft Key)
HomeLSKArguments - Argugement of application you'll be calling
HomeLSKPath - Path to program with in "" i.e. "\Program Files\WebIS\PocketInformant\PocketInformant.exe"
HomeLSKText - text of the button.
HomeRSKArguments
HomeRSKPath
HomeRSKText
I put some screenshort in link below, check it out.
http://www.pdamobiz.com/forum/forum_posts.asp?TID=145949&PN=1

softkeyapplet_192
this works fine with pocket plus you kan put any programm here you want

sudsboy said:
Edit Registry below, you can modify first page of TF3D Soft Key. I don't know about other page yet.
\HKLM\Software\HTC\Manila change value of each key (LSK for Left Soft Key, RSK for Right Soft Key)
HomeLSKArguments - Argugement of application you'll be calling
HomeLSKPath - Path to program with in "" i.e. "\Program Files\WebIS\PocketInformant\PocketInformant.exe"
HomeLSKText - text of the button.
HomeRSKArguments
HomeRSKPath
HomeRSKText
Click to expand...
Click to collapse
Works fine.

does anyone have the path for contacts ? i dont find it, and the poutlook.exe does not work.
thanks

...and I need the path for "Phone"... for back to original state...

For contacts, you have to edit the 3 keys describes by sudboy :
HomeLSKArguments (or HomeRSKArguments) : modify value to "Contacts"
HomeLSKPath (or HomeLSKPath ) : modify value to "\windows\poutlook.exe"
HomeLSKText (or HomeLSKText) : modify value to "Contacts" (for exemple)
It works fine for me (Previously I always got an error message about trusted certificate ....)
For "Phone" the file is "PhoneAgent" (\Windows\PhoneAgent.exe) but I didn't test this one

tnacar said:
...and I need the path for "Phone"... for back to original state...
Click to expand...
Click to collapse
Just delete what you changed before in :
HomeLSKArguments
HomeLSKPath
HomeLSKText

can someone tell me what he path is for the connection manager? I can't for the life of me figure it out....posted this on the thread that had this information but it didn't get answered....

eskasi said:
can someone tell me what he path is for the connection manager? I can't for the life of me figure it out....posted this on the thread that had this information but it didn't get answered....
Click to expand...
Click to collapse
\Windows\CommManager.exe

Can someone please tell me what is the path for 'lock device' or 'device unlocked'?
Thanks!

Phone app softkey config
On my brand new TouchPro, I would like to modify the softkey in the phone app. I see how to adjust for the Home page, but is it possible for the Phone app? Thx in advance

path of "Programs file"
Is there any one know the path of "Programs file", that showing all programs in icon page!! Thank you.

sudsboy said:
Edit Registry below, you can modify first page of TF3D Soft Key. I don't know about other page yet.
\HKLM\Software\HTC\Manila change value of each key (LSK for Left Soft Key, RSK for Right Soft Key)
HomeLSKArguments - Argugement of application you'll be calling
HomeLSKPath - Path to program with in "" i.e. "\Program Files\WebIS\PocketInformant\PocketInformant.exe"
HomeLSKText - text of the button.
HomeRSKArguments
HomeRSKPath
HomeRSKText
I put some screenshort in link below, check it out.
http://www.pdamobiz.com/forum/forum_posts.asp?TID=145949&PN=1
Click to expand...
Click to collapse
For some reason this does not work for me. I've replaced path and text with my desired choice, and it does not load my desired program although the text shows what I want. I have the paths correct, tried other programs, still nothing. I've left arguments blank each time (maybe that's the fault?) but I don't know exactly what goes here.
I did a test, and changed everything BUT text. it still loaded camera, even though the path was pointing to another program.
any help appreciated. thanks!

tonefour said:
For some reason this does not work for me. I've replaced path and text with my desired choice, and it does not load my desired program although the text shows what I want. I have the paths correct, tried other programs, still nothing. I've left arguments blank each time (maybe that's the fault?) but I don't know exactly what goes here.
I did a test, and changed everything BUT text. it still loaded camera, even though the path was pointing to another program.
any help appreciated. thanks!
Click to expand...
Click to collapse
You have to restart. If the path is correct it will work.

yes I've restarted. anyways, I created a thread, it seems sprint users are affected by this issue of it not working.

Hi
Just to check, did you remove menu enhancement in 6.5.0.0.5? it doesnt seem to work.
Anyway, fast rom, thanks!

Fuze - Fn+SPACE doesn't bring up symbols menu :\

i have a at&t fuze and on my stock rom and many other pressing Fn+Space would bring up the symbol menu.
however i am running Da_Gs latest 6.5 and Fn+Space does nothing.
any help?
hopefully a cab or regedit rather than reflashing

can anyone help? this is a problem as i use symbols heavily

try these cabs from shlomki http://forum.xda-developers.com/showthread.php?t=474192

no, the problem is not my keyboard layout- the problem is the symbols menu just isn't on my phone. all other Fn commands work fine

did you disable xt9 to bring back the old word suggestion?
I've been searching all over the place with no satisfying result

i didn't cook in HTC eZ input keyboards, because i don't want them.
if i do cook them in however i get the symbols- it seems the symbols are a part of the HTC keyboards :\
i've been trying forever to find a way to get the symbols without the htc keyboards, can't seem to find answers

Can anyone tell me how to do this on the Sprint stock ROM? I've been trying to find the answer to this question as well, it "says" on the keyboard in yellow that SYM is the key to the left of the space bar but NO keyboard combination I've pressed invokes the symbols menu.
anyone help.

Can anyone tell me how to do this on the Sprint stock ROM? I've been trying to find the answer to this question as well, it "says" on the keyboard in yellow that SYM is the key to the left of the space bar but NO keyboard combination I've pressed invokes the symbols menu.
anyone help.

GustavTheLion said:
i didn't cook in HTC eZ input keyboards, because i don't want them.
if i do cook them in however i get the symbols- it seems the symbols are a part of the HTC keyboards :\
i've been trying forever to find a way to get the symbols without the htc keyboards, can't seem to find answers
Click to expand...
Click to collapse
I've once lost symbols keypad when I've changed registry entry
"HKLM\System\currentControlSet\Control\Layouts\e0010409\Ime File"
from "\windows\eT9ime.dll" to "\windows\compime.dll".
So you might try just to cook "eT9ime.dll" and verify that above entry
points this file, instead of cooking whole EzInput...

This worked for me : Edit the following registry key: HKLM\HARDWARE\DEVICEMAP\KEYBD\CWSLayout - change the value from 1 to 0 and softreset.

BladeStorm said:
This worked for me : Edit the following registry key: HKLM\HARDWARE\DEVICEMAP\KEYBD\CWSLayout - change the value from 1 to 0 and softreset.
Click to expand...
Click to collapse
yeah if you read earlier posts, the keyboard layout is not the problem

you only need to install the xt9 portion of the htc keyboards. the symbols menu is pulled from the xt9.

Just for the records
GustavTheLion said:
i have a at&t fuze and on my stock rom and many other pressing Fn+Space would bring up the symbol menu.
however i am running Da_Gs latest 6.5 and Fn+Space does nothing.
any help?
hopefully a cab or regedit rather than reflashing
Click to expand...
Click to collapse
Just for the records: had the same problem on a Fuze with RRE 5, fix it doing the opposite of what the_ozyrys did:
the_ozyrys said:
I've once lost symbols keypad when I've changed registry entry
"HKLM\System\currentControlSet\Control\Layouts\e0010409\Ime File"
from "\windows\eT9ime.dll" to "\windows\compime.dll".
Click to expand...
Click to collapse
I changed compime.dll to eT9ime.dll and fix it

Get MS keyboard back in WM 6.5

The HTC keyboards don't have a "Ctrl" key so I can't copy or paste in some programs - how can I get the default MS keyboard back?

mem2358 said:
The HTC keyboards don't have a "Ctrl" key so I can't copy or paste in some programs - how can I get the default MS keyboard back?
Click to expand...
Click to collapse
Has it ever had a Ctrl key?
Cheers, Rob.

Yes it has a Ctrl-key.
I want the keyboard also back

I have searched a long time for this, tried many regedits but never succeeded. Your best option is to pay for Resco Keyboard Pro.

TouchPal keyboard also has copy and paste functions.

Hey guys, I was looking for the MS keyboard too! I cant copy/cut paste or Ctrl z anymore with the HTC qwerty.

The free Finger Keyboard 2.1 has copy and paste facilities: http://forum.xda-developers.com/showthread.php?t=501122.
Make sure you install the WVGA version.

Iphone like keyboard (HTC Topaz)?
I am looking for a keyboard that works well with fat fingers the iphone board is so much better then the one I have on my TOPAZ

To get MS keyboard, I do this:
Modify this registry first:
[HKEY_CLASSES_ROOT\CLSID\{42429667-ae04-11d0-a4f8-00aa00a749b9}\IsSIPInputMethod]
"Default"="1" (by default it is "0")
Then install this program in phone memory:
http://forum.xda-developers.com/showthread.php?t=414422
Then modify the registry as follows:
[HKEY_CURRENT_USER\Software\HtcExtFun]
"StylusOutSipName"="Keyboard"
"StylusInSipName"="Touch Input"
Finally restart.
This way, when stylus is in, it will switch to HTC's Touch Input (Full, Compact or Phone pad depending on your last selection) then when you take out the stylus it will switch to the MS Keyboard.

Why use a keyboard for copy/cut/past?
Here is what I've done...
Install the keys controler from http://forum.xda-developers.com/showthread.php?t=555821
Change the behavior of the volume keys:
VOL DOWN :
- single click : default
- double click : Emulate CTRL+C to OS
- long click : Emulate CTRL+X to OS
VOL UP :
- single click : default
- double click : default
- long click : Emultate CTRL+V to OS
And it's working with all the applications....

And I quote:
This is for Topaz only! Do not try to install this on other devices!
Do not ask me to make a version for other device since my remappers are driver dependent and this can be very and very complicated without real device (if possible at all).
Nice one though romualdrichard, But I'd use it if I had a Topaz or a program just like that for my MDAcIV

omar302 said:
To get MS keyboard, I do this:
Modify this registry first:
[HKEY_CLASSES_ROOT\CLSID\{42429667-ae04-11d0-a4f8-00aa00a749b9}\IsSIPInputMethod]
"Default"="1" (by default it is "0")
Then install this program in phone memory:
http://forum.xda-developers.com/showthread.php?t=414422
Then modify the registry as follows:
[HKEY_CURRENT_USER\Software\HtcExtFun]
"StylusOutSipName"="Keyboard"
"StylusInSipName"="Touch Input"
Finally restart.
This way, when stylus is in, it will switch to HTC's Touch Input (Full, Compact or Phone pad depending on your last selection) then when you take out the stylus it will switch to the MS Keyboard.
Click to expand...
Click to collapse
TNX! Finally something that works! Do you know how I can get the big buttons with gestures mode on? I got the small kb buttons now...

VerusAmos said:
TNX! Finally something that works! Do you know how I can get the big buttons with gestures mode on? I got the small kb buttons now...
Click to expand...
Click to collapse
If you go to Menu>Settings>Personal>Input and from there select "Keyboard" from the drop down menu.
By the way, the gestures will also work on the small buttons.

omar302 said:
If you go to Menu>Settings>Personal>Input and from there select "Keyboard" from the drop down menu.
By the way, the gestures will also work on the small buttons.
Click to expand...
Click to collapse
I know they also work on the small kb, but my point is that I like the layout with the other two options on. The row with numbers is gone so it leaves more space for the letter buttons.
The reason I cant turn on these options is because I'm using Benko's v5.0ROM (6.5) and that ROM has only the Touch Input kb. I think the chef took out the settings from the drop menu. Also there's no input settings in the personal settings, so I cant change the ks settings.

Can I just add MS Keyboard without installing the additional code? I want MS Keyboard whether stylus is in or out.

akran said:
Can I just add MS Keyboard without installing the additional code? I want MS Keyboard whether stylus is in or out.
Click to expand...
Click to collapse
Use the same procedure, but put "Keyboard" for both registry strings.

VerusAmos said:
I know they also work on the small kb, but my point is that I like the layout with the other two options on. The row with numbers is gone so it leaves more space for the letter buttons.
The reason I cant turn on these options is because I'm using Benko's v5.0ROM (6.5) and that ROM has only the Touch Input kb. I think the chef took out the settings from the drop menu. Also there's no input settings in the personal settings, so I cant change the ks settings.
Click to expand...
Click to collapse
I can't seem to get the program to install in my Topaz WM6.5 WWE asia rom. Can you like make it nto a .cab?

I found out how to put the MS KB back to the drop menu again! Here's a a reg file...

VerusAmos said:
I found out how to put the MS KB back to the drop menu again! Here's a a reg file...
Click to expand...
Click to collapse
Thaks for this....
Also I was thinking to go for WVGA version of http://forum.xda-developers.com/showthread.php?t=501122
Which one will be good for easy????

Can't really give an opinion on that... I always have prefered the MS kb. Other kb's that are finger friendly are the latest HTC kb's. Or the EzInput kb's which is simular to the HTC kb's.

[Q] Disable vibrate for phone keypad

Hello everyone,
Is there any way (a registry hack, I guess) to disable vibrate when dialling numbers using the phone keypad? I have not been able to find it anywhere yet. Those short vibrations are -- in my opinion -- useless and only drain the battery...
Any help would be much appreciated.
nvx

nvx2004 said:
Hello everyone,
Is there any way (a registry hack, I guess) to disable vibrate when dialling numbers using the phone keypad? I have not been able to find it anywhere yet. Those short vibrations are -- in my opinion -- useless and only drain the battery...
Any help would be much appreciated.
nvx
Click to expand...
Click to collapse
try to look the trick at http://forum.xda-developers.com/showpost.php?p=9436315&postcount=7

Dear Hakim,
I am afraid that the mentioned registry hack, i.e.:
Using Resco Registry, go to Hkey Local Machine / Software / HTC / ezsip
Add a new DWORD Value string and call it "VibrationEnabled" (without the quotes) and give it a value of 0.
then Soft reset and enjoy!
Click to expand...
Click to collapse
is of no use to me, because the string "VibrationEnabled" has already been present and held the value of zero. I believe this disables vibration related to the usual keyboard, not the phone keypad I am concerned with.
Anyway, thank you for your response.
Have a nice day,
nvx

I think there is no hardware keyboard in any variant of Diamond2. Are you sure it has one?
If you are looking for onscreen keypad vibration: Go to settings tab - personalize - Vibration: and you have check box to de-select.

Dear TD2IN,
You are right, there is no HW keyboard in Diamond2. However, there are several software keyboards, e.g. the usual QWERTY one (a "full" keyboard) or the phone keypad (similar to keypads on older cell phones with letters "a", "b" and "c" on 2, letters "d", "e" and "f" on 3, etc.). Disabling vibration upon pressing a key on the QWERTY software keyboard is easy and can be done (as you wrote) in Settings -> Personal -> Input -> ...
However, I am concerned with disabling vibration for the phone keypad (used primarily for entering phone numbers in the phone application) which cannot be done at the same place as disabling vibration for the QWERTY keyboard.
Have a great day.
nvx

I will also like to know this if you find solution.
thanks.