Database Develop

Single SMS Multiple Contacts

Hey Everyone,
I am looking to send a single sms to specific multiple contacts. I understand that the sms feature in WM6 allows you to autocomplete a contact by typing theyre name as you go, I am looking for however a CAB file or something that will allow me to do something like tick the people i want to send to?
I hope they're is something like this out for WM6, otherwise its a long time sending about 200 mobiles a new number ha ha.
I'm not a often poster, but long time viewer, and i know you all know your stuff and i'm thankful for anything you can tell me!
Sean Saunders

In Duttys 6.1 rom there is something called groupsms, I dont know how/if it works...but I know its there , may be what you are looking for

SeanSaunders said:
Hey Everyone,
I am looking to send a single sms to specific multiple contacts. I understand that the sms feature in WM6 allows you to autocomplete a contact by typing theyre name as you go, I am looking for however a CAB file or something that will allow me to do something like tick the people i want to send to?
I hope they're is something like this out for WM6, otherwise its a long time sending about 200 mobiles a new number ha ha.
I'm not a often poster, but long time viewer, and i know you all know your stuff and i'm thankful for anything you can tell me!
Sean Saunders
Click to expand...
Click to collapse
Don't know if you'd only be satisfied with ticking multiple names, but the auto-complete thing does allow you to type in more than one name. I assume you realized that? Alternatively you can just continually click on "add recipient" and select them all one-by-one, though that's a pain in the ass. I've found the autocomplete for multiple recipients to be pretty fast. Do you not find that to be the case?

I was chatting to a few people on palringo's MoDaCo group and one user suggested Jeyo Mobile Companion 2.0 Demo. It does exactly what i wanted to do on the phone but on windows XP!
I only really needed it as a one off but i would recommend it as a solutions especially if your going to use it reguarly
Thanks for your comments and suggestions though, your all good people!
Sean Saunders

you can try this software SMS Assistant from QimSoft
http://www.qimsoft.com/
After install, it will add one Menu item "Add Recipients" at the bottom of Menu
Click it then it allow you to multi select contact

yeah I use group sms as well you can find it in the development thread. didn't realize it was included in the 6.1 rom as well.

SeanSaunders said:
I was chatting to a few people on palringo's MoDaCo group and one user suggested Jeyo Mobile Companion 2.0 Demo. It does exactly what i wanted to do on the phone but on windows XP!
I only really needed it as a one off but i would recommend it as a solutions especially if your going to use it reguarly
Thanks for your comments and suggestions though, your all good people!
Sean Saunders
Click to expand...
Click to collapse
Don't worry mate there is an ultimate solution for GRoup SMS... Although i already answer this query in this forum before but anyway...
You definitely need a RJV SMS SCHEDULER OR SHUBAROO'S GROUP SMS 1.4.4 ...
just goto www.freewarepocketpc.net and search it there
cheers...

voice calendar application

Hi all
Im looking for an app that will complement the calendar by allowing to record voice notes instead of text input when the calendar is open on "day" view.
when you hold down a specific time on the calendar, the voice recorder is activated and the Voice Note automatically gets recorded on the calendar date and time you are holding down, and gets added to your reminders/appointments with default settings and no more questions.
It would be a lot better obviously if it was translated to text first, but not necessary.
I was able to find "voice cal", very old and uninstallable on wm6.1 with .cf.net 3.5
and also "speerio voice organizer"... looks like a memory hog and i read it doesn't work right. Its also crowded with a million different things that are not useful.
I just want a simple interface to be able to use with one or two clicks or buttons in order to set up a calendar event while im driving or on the phone etc....
thanks

bump!.................

Hi Spiro,
any luck on finding that app? Cos i've been looking for the same, tho i would prefer that when u push the "record" button, u get multiple choices regarding where to place the voice note, where "calendar" bein one of the first. Then u just had to place it into the day and time you would like it to be. Haven't found one yet, so i've started to write to different application developers suggesting such an app. I'm surprised that they haven't made one ages ago. In meantime, if you should come across one, pls let me know.
cheers

anyone???
Do I really have to take up programming and write my own app?

I was lookin around and saw this
handheld.softpedia.com/get/Business/Calendar/VoiceCalendars-52540.shtml
I think this is different than VoiceCal
The one I gave the link to, seems lke it could work. Only problem is that it doesnt use WM existing calendar.

I tried speerio voice reminder and it was horrible! I dont know what some people are thinking.
All I need is a simple plugin to show itself on the calendars context menu when I "long press" on dayview to say "new voice note" and when I click on it it should have a HUGE red record button and a stop button. When you hit the stop button the calendar would save that as an event with the default alarms on the date it was created
the only problem I see with that is that the heading of the event would not be very informative unless one typed the info, but im willing to live with that. Or maybe MSvoice command could help there with some text to speech engine!!! (im not holding my breath)
Im using an app called "thumpcal" right now but they dont have a "day view" and I have to set the time after I scedulle an event on a specific date, but its better than the built in calendar BECAUSE ITS SIMPLE!!!!!
I dont understand how am i supposed to use a program like "speerio" while im driving when it has 30 f...n buttons the size of a neutron on the screen in a grey on grey display?????????
Does anyone know what I have to learn in order to put a little program together to do what I want it to do?
PS I also found some other interesting programs like "freenotes" that I thought was a good idea but I would like to be able to initiate that from the "day view" on the calendar (right click on a time on the screen and have the choice of a voice note or a pen note) so that I dont have to key- in the time that I want the event to take place

ummmmmm.....the link that I posted does what you want.
1.Make folders by subject name
2.Click on a folder, it then brings up calendar
3.Click on a day of the month
4.There is a BIG RED RECORD BUTTON at bottom of screen
5.Record your note, it is then stored for that specific day
Is this not what you want? Granted it doesn't use your existing calendar but hey, something is better than nothing, right
VoiceCalendars
Update*
I was just lookin around and found this app. I think it might be right up your alley. Very simple/minimal interface. Allows you to record a voice message up to 2 minutes and then you can set a date and time for it to play aloud automatically.
Voice Reminder: Download Cab
Heres the website I found it at
I hope either of these programs can help. I know how frustrating it is not to be able to find that perfect app!

asofiker said:
ummmmmm.....the link that I posted does what you want.
1.Make folders by subject name
2.Click on a folder, it then brings up calendar
3.Click on a day of the month
4.There is a BIG RED RECORD BUTTON at bottom of screen
5.Record your note, it is then stored for that specific day
Is this not what you want? Granted it doesn't use your existing calendar but hey, something is better than nothing, right
VoiceCalendars
Update*
I was just lookin around and found this app. I think it might be right up your alley. Very simple/minimal interface. Allows you to record a voice message up to 2 minutes and then you can set a date and time for it to play aloud automatically.
Voice Reminder: Download Cab
Heres the website I found it at
I hope either of these programs can help. I know how frustrating it is not to be able to find that perfect app!
Click to expand...
Click to collapse
Hey asofiker
thanks for your reply
I have an HTC Kaiser phone
I tried both programs you suggested and had the same problems with both that other users seem to be experiencing
the "voice calendars" displays a "the control grid .....could not be created" error
and the other program from the XDA member gives me the "An error occoured on sub_app_start.
This device does not support display power on/off Continue?" error.
I appreciate your help and if I find anything that works in the future Ill be sure to post here
Thanks again!

Not exactly what you're looking for but an idea: Agenda Fusion with its Notes Organizer and Data Linking features. Also a good agenda with lots of views. http://www.developerone.com/agendafusion/index.htm

Pocket Informant 8 is the best Calendar and Contacts app available and I always install it to my wm devices. It has voice notes recording functionality and then some. Check it out. I have tried all the others at great expense (some provide trials) and this is by far the best one.
Regards,
MAC

I tried agenda fusion in the past and find that it falls in the same category as most of these organizer programs its simply overkill for a one handed hand held device with a 2 inch screen
Ill give pocket informant a try and post back
Thanks

pocket informant no good for this purpose either!

spiro said:
pocket informant no good for this purpose either!
Click to expand...
Click to collapse
Which version of PI are you using?
Mine is version 8 and it does exactly as you require! It saves a voice note under Storage Card/Voices when you select Notes View>Menu>Recording

MACkjam said:
Which version of PI are you using?
Mine is version 8 and it does exactly as you require! It saves a voice note under Storage Card/Voices when you select Notes View>Menu>Recording
Click to expand...
Click to collapse
dont remember version I already uninstalled it
Im was having a problem with the interface trying to do too much!
Im looking for large buttons and a simple interface like a variation/add on to "thumcal" or "vito audio notes" etc
thanks

Sort phone book First, Last

Hi there,
I'm fairly new to my Diamond but I love it a great deal.
There is one thing that disturbs me though and that is that I can't sort my phone book other than Name, which is "Last, First", and by Company (I don't bother about Company). I would like to be able to sort my contacts in First, Last Name order, I have a about 300 names in my list and it is really confusing when I don't find who I'm looking for anymore.
I would like to hear with you if there is a way to hack the register or any other solution for my issue.
And no, 3rd party application is not an option, sure, it would do the trick but I want to use and have easy access from the Contact tab.
All help appreciated.
Thanks!

there is a way, but it's not going to be fun, and you may want to do it on the computer in outlook instead.
Outlook on your PC and Windows mobile default to filing contacts as Last Name, First Name as you have found.
however, if you edit a contact, they both have a File as option. here you can select various different options, one of which being first name last name.
it's a bastard having to do it on all contacts, which is why you might want to do it on the computer instead.
hopefully, someone knows of a reg edit that'll fix it.

rhedgehog said:
there is a way, but it's not going to be fun, and you may want to do it on the computer in outlook instead.
Outlook on your PC and Windows mobile default to filing contacts as Last Name, First Name as you have found.
however, if you edit a contact, they both have a File as option. here you can select various different options, one of which being first name last name.
it's a bastard having to do it on all contacts, which is why you might want to do it on the computer instead.
hopefully, someone knows of a reg edit that'll fix it.
Click to expand...
Click to collapse
I developed an Outlook form a few years back that goes through all Contacts and sets the File As fields to First Name Last Name. Is this what you're after? I still have it but haven't used it in ages. Worked perfectly back then.
Feel free to try it (attached and I would recommend backing up your Outlook contacts in a PST first)

mkhattab said:
I developed an Outlook form a few years back that goes through all Contacts and sets the File As fields to First Name Last Name. Is this what you're after? I still have it but haven't used it in ages. Worked perfectly back then.
Feel free to try it (attached and I would recommend backing up your Outlook contacts in a PST first)
Click to expand...
Click to collapse
Thanks! This should prove helpful.

L o r d R a j said:
Thanks! This should prove helpful.
Click to expand...
Click to collapse
Please post some feedback if you try it as I''m curious to know

Thanks for the all input and quick replies.
mkhattab said:
I developed an Outlook form a few years back that goes through all Contacts and sets the File As fields to First Name Last Name. Is this what you're after? I still have it but haven't used it in ages. Worked perfectly back then.
Feel free to try it (attached and I would recommend backing up your Outlook contacts in a PST first)
Click to expand...
Click to collapse
I will definitely try your form and I really hope that it does the trick.
But I think there should be a register hack out there somewhere.
- Mikael -

In your contacts, on the Diamond, you have the option : "save as", but you've gotta do it manually for each one. Open a contact, tab the right soft-key (menu) choose edit, there you go

There is already an existing thread for this topic.

MrDerrickC said:
There is already an existing thread for this topic.
Click to expand...
Click to collapse
There is?
And I thought that I search the forum in every possible way!
Can you please provide me with a URL to the already started thread?
- Mikael -

m1kael said:
There is?
And I thought that I search the forum in every possible way!
Can you please provide me with a URL to the already started thread?
- Mikael -
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=269316
Search terms: outlook search first name
Try using the Google search of the site - it is very powerful

Phantom Mailbox in Touchflo - How to remove?

Hi there,
using a touch Diamond and some time ago went through a ROM upgrade and used Sprite Backup.
On the messagign screen I now have some phantom mail boxes on the right hand side. If you click on the envelope it will come up saying "no Messages". If you then click on inbox it will take you to the Select an Account screen (as the selected account doesn't actually exist)
If you go through to the Windows Mobile interface you can only see the current mailboxes which are configured.
I have looked into the option of creating a new backup and hard reset and restore without the mail and configure all over again but would like to avoid this as I have found in the past this leaves me with duplicate records (due to sycing with multiple machines).
I am looking to find where I need to go to remove the phantom mailboxes. Looking around I am assuming there must be some configuration files or registry elements for TouchFlo which tells it to display the folders.
Does anyone know where this information is to edit or delete? All ideas are welcome and encouraged.
Thanks in advance

ghost email
i have the same problem.Did you find the solution for this?Please post.

I have the exact same problem and it's quite anoying

i had the problem once too, and then I was advised to use the file i'm posting here. Copy to phone and run the .exe from phone.
I got it from another thread here on XDA-Devs, but don't remember who to credit.. Post if successful.

chribruu said:
i had the problem once too, and then I was advised to use the file i'm posting here. Copy to phone and run the .exe from phone.
I got it from another thread here on XDA-Devs, but don't remember who to credit.. Post if successful.
Click to expand...
Click to collapse
Thanks alot, this worked perfectly

Worked like a charm...

works a treat, thanks.

this is excellent. thank you very much.

Easy to use. Thanx!

Thirteen "not obvious" questions about using X1i

Good afternoon!
I've tried to ask these question on other forums, but almost nobody gave me an answer. There were some about different software to use, but it didn't really help. So I would be very pleased if you, dear X1 gurus, answer these question. Please, if you know the answer - write it here for me and other people. Thank you very much in advance!
The priority is: I. How to solve the problem using native software or registry? II. If and only if the first is not possible, how to solve it using different software?
1. Where in file system the vocabulary of words which were inputted before is situated? It's a vocabulary with these tooltips-words while typing. Can I get it somewhere form my phone and backup or even edit?
2. How can I check my X1 uptime?
A: As yet I know only one way: use AEButton Plus. You can correct or supplement this opinion(and please do it) if you know more on that.
3. Someone called me from number +ХХХ, I want to call him back, BUT to add a zero between + and the first digit(+0XXX). How can I do it? I can't copy this number and there is no options like "change then dial". The one and only solution for it - is to choose "send SMS" and copy the number from the "From" field! But is it useful and normal for a device which costs about 500 euro?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
4. Imagine: you have a contact Ivan in your contacts, which has 2 phone numbers: mobile and work. Two sms arrive to your phone: one is from his home number, another is from work. Sms inbox displays both of it as "Ivan". How do I know which sms is sent from what number?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
5. How can I copy a number which was dialed earlier or number from contacts? I see only one way(but it's weird): chose "edit contact" and copy from the field. Is there another way?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
6. While a phone conversation how can I easily save a number which my friend is saying to me? I tried to dial it while a call is active, it's ok, but once the call is dropped, my number disappears! Yes, I can create a note using a special touch-key, but it's not useful, because I should use my keypad and then should copy that number, but I need to dial it! How can it be solved?
7. Have anybody experienced a problem while taking a photo of many different objects? I had. It happened when I took a photo of a forest - there were a lot of trees alongside each other and after pressing shot button, "Saving..." was displayed on my screen for about 15 minutes! After it said that it failed to take a photo. What it can be?
8. Where can I find all my earlier connected WiFi points and passwords? I want to save it before upgrading my firmware. Can I backup it?
9. Can I turn of a feature of turning my screen light on when I plugging my X1 to PC? I don't want this light to be turning on when I do it! Is it possible?
10. While surfing internet via GPRS/EDGE or getting my email from server, my GSM part of device seems to be "unconsciousness": when somebody calls me, I'm "out of zone". How can I fix it? I want my GSM part to be number 1 by priority!
11. I can see anything when the sun is shining. I know everybody with X1 can't. But can I "ask" my backlight to help me? For example, set it to turn maximum power when on the light, or something? I'm asking because, as I've understood, my auto-backlight works vice versa: when it's bright - it turns off, when it's dark - it turns its max power. I want max power when it's very bright too!
A: People say that screen protector with anti-glare really helps.
12. When an SMS is coming, I get a popup notification at the bottom of the screen. I can either press "Reply" or "Options". If I press reply, the chat mode opens and I can reply, seeing all our conversation. BUT if I go to my address book and choose "New SMS" on a contact, different form will be opened, just like for e-mail composing. And here is a question: how can I make this "e-mail composing" style sms appearing after I press "Reply" when new sms arrived? I know how to turn the chat mode off, but I don't need it to be turned off completely, because it's useful while reading sms from one person. I just want reply to a person using simple form. Is it possible somehow? I think that if it's can be made by hands(New sms from contacts), then it could be implemented programmatically... maybe some values in registry?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
13. At the screens you can see screenshots from my X1 with R2A0010 and 1.14 radio: 1 hour after powering on and 2 days after powering on. Why there is such a difference in memory consumption in some system processes? Is it an ordinary thing?
A: People say that it's normal. You can correct or supplement this opinion(and please do it) if you know more on that.
Thank you very much in advance again!

Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
#5, go to call log in the phone dialer and there is a menu option to save to contacts. If you want to save it to a pre-existing contact....you will have to add a question #14 to your list

PhoneX can do these two.

WhyBe said:
Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
Click to expand...
Click to collapse
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
WhyBe said:
#5, go to call log in the phone dialer and there is a menu option to save to contacts.
Click to expand...
Click to collapse
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
WhyBe said:
If you want to save it to a pre-existing contact....you will have to add a question #14 to your list
Click to expand...
Click to collapse
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
VNMenIeu said:
PhoneX can do these two.
Click to expand...
Click to collapse
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)

BRING ON THE QUESTIONS!!!!!!!!!
1 - I don't know.
2 - AEB Button Plus has such a feature.
3, 4, 5, 6, 12 - I use PhoneEx sorry.
7 - Never heard of it. Upgrade your device to R3A and try again.
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
10 - Never had that problem. Are you using a custom ROM?
11 - I can see the screen very good in the sun, because I use a screen protector with anti-glare. Buy one and be amazed.
13 - It is normal.

J-Pro said:
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)
Click to expand...
Click to collapse
PhoneEX is way more useful than org. dialer

orelsi said:
BRING ON THE QUESTIONS!!!!!!!!!
...
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
I've been using the PhoneEx trial for a few days and it doesn't do #5 and #6. If any workaround involves tons of keypresses and program changing (during the call) to accomplish, then it fails. I think the OP is looking for a quick way of accomplishing these things during a call. Going to the notes application during a call only partly works. In order to actually use that number you may have jotted down in notes, you have to find the file and call the number from the notes file...not very elegant. There should be a means of jotting down numbers while in the dialer (without sending out tones causing your voicemail to go crazy) so that you may call or save them during or afterwards.
Also, I may be wrong but, how do you add additional numbers to a contact without copying and then going into edit contact then pasting? For example, how do you add a home number to a contact that already has a work number without manually going into edit contact and adding it. There should be a "merge with existing contact" feature within the dialer menus.
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.

WhyBe said:
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
Click to expand...
Click to collapse
That is your right, but not my problem.

Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe

spikegotti said:
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe
Click to expand...
Click to collapse
Haha same here. It is super finger friendly and looks so un-WinMo D) like.

orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.

orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
same...i think it's the most useful app in my fone.

WhyBe said:
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.
Click to expand...
Click to collapse
Sorry, I can't understand what you want .

J-Pro or others,
what is the task manager in screenshots in first post?
It's not a biult-in one??

orelsi said:
1 - I don't know.
Click to expand...
Click to collapse
Thank you, it really helped me!
orelsi said:
2 - AEB Button Plus has such a feature.
Click to expand...
Click to collapse
Didn't know, thank you.
orelsi said:
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
orelsi said:
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
Click to expand...
Click to collapse
If somebody has it, please, post it here...
orelsi said:
10 - Never had that problem. Are you using a custom ROM?
Click to expand...
Click to collapse
No, my rom is R2A0010 UK WWE.
doministry said:
what is the task manager in screenshots in first post? It's not a biult-in one??
Click to expand...
Click to collapse
It's FdcSoft Task Manager

J-Pro said:
Thank you, it really helped me!
Didn't know, thank you.
Click to expand...
Click to collapse
You are welcome!
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
Click to expand...
Click to collapse
Sorry as in "I use superior product ftw" .
Unfortunatelly the nature of WinMo is that you need to add third party soft most of the time. That's the way it works.

orelsi said:
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
Click to expand...
Click to collapse
Checked all txt(and other) files in windows folder. There are nothing about wifi settings...

J-Pro said:
It's FdcSoft Task Manager
Click to expand...
Click to collapse
Thank you for help!

If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?

VNMenIeu said:
If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?
Click to expand...
Click to collapse
Just for fun My work computer can be running for month or so... Sometimes it's interesting for how much your X1 is powered on. For example, if I see any bugs on it, I question myself: "How long does this thing work? Maybe it's time for an SR?". If I found that it's only a day - I would be very curious. And if it's already a week - I do an SR without any additional thoughts That's my answer