hi all
i noticed most of us having this problem with imate spjas \ breeze
stuck at bootscreen and can startup the phone
i downloaded the original rom from
ftp://ftp.clubimate.com/
extracted it and took the nbh file renamed it to breeimg.nbh
copied it to SD card and camer+reset button
congratulations
where is every body... can any majestious senior or moderator help...
vodovodo said:
hi all
i noticed most of us having this problem with imate spjas \ breeze
stuck at bootscreen and can startup the phone
i downloaded the original rom from
ftp://ftp.clubimate.com/
extracted it and took the nbh file renamed it to breeimg.nbh
copied it to SD card and camer+reset button
congratulations
Click to expand...
Click to collapse
i"m pleased to know that you fixed your device, and thx that you shared with us your xperience, specially that no one seems to care for the members request in this forum even the moderator....
i dtried what you shared with us, but i couldn't repair my device, still stucked in the DAME windows mobile blue screen
hope i'll find an answer from the majestious members or senoirs or even moderator to repair my device....
i think the problem is there is the hardware diff. between spjas and mteor ! i dont know
do u have the imate ??? the one with the camera infront ?
vodovodo said:
i think the problem is there is the hardware diff. between spjas and mteor ! i dont know
do u have the imate ??? the one with the camera infront ?
Click to expand...
Click to collapse
yep that's it...
when i extracted the rom that i downloded from ftp imate club, and renamed the breeimg.nbh, i copied it to the memory card, i pressed cam+power botton, the device entered into bootloader, then marked checking for 15 to 20 sec
then NOT ALLOWED....
really i'm tired from trying to fix help.... euffffffffffffffffffffffffffff
just relax.... i felt the same and i couldnt think strainght too
lets take it step by step
1- make sure u formated the SD with FAT32
2- make sure to rename the nbh from the exe file "not the exe itself just right click and extract here if u have winace or winrar" to BREEIMG.nbh with cap. letters
try again and tell me what happened
helloooooooooooooooooo no one can help here, where are the professionel in the forum SOS HELPPPPPPPPPPPPpp!!!!!!!!!
vodovodo said:
just relax.... i felt the same and i couldnt think strainght too
lets take it step by step
1- make sure u formated the SD with FAT32
2- make sure to rename the nbh from the exe file "not the exe itself just right click and extract here if u have winace or winrar" to BREEIMG.nbh with cap. letters
try again and tell me what happened
Click to expand...
Click to collapse
nothing better,
when i did these steps, the device didn't even load or even the cheking word.
but when i tried to synchronize my device via active sync and install the rom the device started to install windows 1%... 2% and oupssss failed, the device turned off and restated....
just to let you kow on the 3 color screen (bootloader screen)
BREE100
IPL-0.90
REE100
SPL-1.09.0000
and i installed before this bootloader vrsion that i geted from a link mentionned to be installed before the BREE rus
really i dont know what to do...
but really thx for your help...
it seems you are the one who care in this forum...
Related
Hi,
i tryed updating the qtek 9090, after i changed the country id type 1 it started.
It controlled my device and said : update from 1.12 to 1.40 and all the specs.
Then i hit next and id says checking information. It saysthat about 30 minutes now and the active sync connection is lost. Also my qtek looks dead.
I tried the installer again but it wouldn't work
I did a soft-reset and that didn't work also.
What now ? Hard-reset or ?.....
Thanks dudes
Ok, after a hard reset my device shows USB v 2.03 again so that's good ins't it
Now the country id error keeps coming, type is at 1 so what can i do more ?
Hi ThEScReW,
I've had the same problem while trying to downgrade to 1.22GER after flashing my device to 1.40WWE. I found out the modified version of MAupgradeUT that normally works for the Magician was able to flash my device with any BA rom I tried. It doesn't matter whether it's a type I or type II rom. Follow my instructions in the readme.txt and it should work.
Good luck!!!
Ok, i'm real thanks for that but i'm also really not that smart if you think i am.
What should i do with al those files? What to put where and what to do first and what last ?
Thanks :lol: you will be a great help
Where do you live btw in germany ?
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
berni_1980 said:
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
Click to expand...
Click to collapse
Ok thanks but the roms i have are just 1 exe file and that's an installer. It's as easy as hell. I just have to run de exe and follow the rules on the screen.
If i do what you tell me to do, then i need to download a rom from the ftp with al the files in. Then what do i do with those files? what first, what next , ..... :roll:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
berni_1980 said:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
Click to expand...
Click to collapse
Ok i'll try it tonight THX
Problem : if i use the rom from dangaard then the exe isn't a rar file, it's just an installer with everything in de exe ..
If i take a rom from the ftp and i unrar it then it are all CAB files and no .nbf files :roll:
Am i stupid or what? Witch version do i need and where do i get it? Maybe a link would do good :lol:
I'm really sorry for those questions, but here normally we just do the installer. I did allready a QTEK S100 and a QTEK 2020 with the installer from dangaard and everything worked fine. I just don't get it why i get the country id error now.
Try this one: ftp://ftp.xda-developers.com/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom/
i need to change the operator in my ROM i guess... i am trying to flash a SX66 w/ WM5 (tuma 1.4) and i cant change the thing!! if someone could please help... i would be greatful. im new to this.. i havent flashed these kinda phones b4.. thanks in advance.
let me try... i assume you have already downloaded tuma 1.4, extracted it, saved the whole folder on your c:> directory (not desktop), and renamed the said folder into "ROM". also, you have executed the application GetDeviceData and you have identified your operator value. let's say that this operator value is ???
1. using your computer, go to START > Command Prompt. Type
CD\
then type
CD\ROM\
then type
SETOPERATOR ???
where ??? is the operator value you got from GetDeviceData.
2. you wait until it's completed. then that's it! you should be ready to take the next step. as i understand it, it is important that the nk.nbf file is in that ROM folder with the SetOperator application in order to make upgrading/downgrading work.
hope this helps.
by the way, have you been successful in repartitioning using the xda3nbftool/editfix.bat? i'm getting frustrated in not having a storage of 60MB (i only have 43MB) since i don't understand how to make it work. hope there's someone who could help me.
.... and read
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel and
http://sx66-blueangel.home.comcast.net/
also you should say what you have tried and give more specific error messages. How do you expect someone to be able to help you with
.. and i cant change the thing
Click to expand...
Click to collapse
raymonds,
1. u need to unhide and unlock the ext_rom
2. resize it to 128k
3. reload wm5 done.
if u need it in detail, let met know. i also posted a guide on how to that a while back.
imatrix
there u go the link
make sure u read the whole thread before doing it
http://forum.xda-developers.com/viewtopic.php?t=50628&highlight=storage
whoa! that was fast! thanks a lot, imatrix.
Hi there
re: HTC Himalaya. how do I change the first bootscreen? Pls can you give links to tools and provide instructions.
Cheers
I think what you are referring to is the welcome screen? Perhaps do a search for welcome.96 and see what comes up.
I had it in mind you just made an image the size of the welcome screen image and named it welcome.96.png and then just dragged it into the Windows folder (it will overwrite the original).
Having said that, Google it and find out how to do it exactly, don't take my word for it. But you should have enough information frfom what I have said to find out more.
I see its your First post..Welcome to xda-developers..sspecially for choosing Himalaya
To Change the Splash Screen..follow these steps :
Open any Image Editor
or Choose any Image that is 240*320 In Size
Its format Must be .PNG
and rename it to " welcomehead.96.png " (note : png is the extension )
connects your device via Active Sync or copy the splash screen to your Devices and replace place it in the \Windows Folder..it will ask to over right..Select Yes and You are done
Soft-Reset and Enjoy
PS. Search the Forum for ALOT of welcomeheads
the screen I want to change is the very first one that is shown when the machine is turned on, i.e. it appears as the device is booting up. Hope this makes sense.
Oh I suspect then you are not talking about Welcomehead/Splashscreen. Does the screen you are talking about feature the logo or name of a phone company/service provider? IE Telstra, Optus, Sprint, AT&T, Verizon, etc
yes, that's the one. On booting up it is replaced by the welcome screen, and then the wallpaper. I'm using Ather's 'Dark Edition'
i would like to change this very first image too. I hope someone know how to do it.
Hrmm, not sure how possible it is. I have both the o2 logo on one phone and Telstra on the other which I wanted to remove. I dare say it is part of the radio rom, not the OS rom. Basically, you can flash the Radio to a different version, just as you can flash the Operating System, though some say it is a bit more difficult.
No matter what rom I flash, those logos are always there, so I suspect they are part of the radio rom. I will investigate.
EDIT: Okay this guy has created a program to do it for the Prophet only, but he may be the person to ask as I would suspect he had the general knowledge of how to do it by hand before he created the program.
http://forum.xda-developers.com/showthread.php?t=333194
Thoses two can be changed by editing the ExtRom file (ms_.nbf) from a 2003 Rom..Search the forum for WM2003 Edit in the Himalaya Wiki...i have also uploaded a Clean extrom..just replace the images init and then place it in the folder where your HimaUpgradeUT_noid.exe is and flash as normal
here is the ExtROM file : http://rapidshare.com/files/82299532/ms_.nbf
I think this way was working in WM5
Install extromunlocker
Soft reset
Start
Program
ExtROMTools
Unhid
Unlock
Folder will appear in the root
Inside this folder is the image need to be change
But I traied this extromunlocker cab file in WM6.1, I could not find the Extrom.
Thanks for the method - however, I'm new to this and would appreciate a bit more hand-holding if you don't mind. Can you give a more detailed stepwise method?
TIA
It wont work if u ahve Partitioned your DOC..because that was the Storage where these files were kept
Well ok..just tell me what u cant understand
See here ..
Hi,
as Ather described, I did it successfully last year this way
(http://forum.xda-developers.com/showthread.php?t=220799&page=12)
as described, I restored my ExtRom with DOC_Restore, took the T-Mobile 1.72 Update (http://xdazone.india372.server4you.d...d.php?id=3373), extracted the ms_.nbf (ExtROM) , changed the splashes with "Windows Mobile 2003 ROM Editor" and updated the ExtROM. Works well.
I'm not sure if the t-mobile extrom could be used for other version of Himalaya than the MDA II.
Click to expand...
Click to collapse
So long
HonkBB
I'm using the x1a (n.america) and i figured in order to make a backup of my firmware i would need the NAM (canada) stock rom instead of the UK one. (correct me if i'm wrong plz). And so i found this stock rom on this site, the exact one, even my provider's name was on it, and i downloaded it but it just came as an exe file and when i run it it just extracts/installs an image file (215mb) in a folder specified by me. In the tutorials it says that i need to put the RUU_signed.nbh from the stock rom in the kovsky folder... but i don't see that file anywhere, is it the same thing as the image file installed by the exe file? Do I just rename it and proceed??? PLZ answer this if you can because i have everything else prepared to flash my phone but this is the only thing holding me back...
Yes, if you're using the RUU method rename it to RUU_Signed.nbh if you're using the SDCard method rename it to kovsimg.nbh.
bgeorgi said:
I'm using the x1a (n.america) and i figured in order to make a backup of my firmware i would need the NAM (canada) stock rom instead of the UK one. (correct me if i'm wrong plz). And so i found this stock rom on this site, the exact one, even my provider's name was on it, and i downloaded it but it just came as an exe file and when i run it it just extracts/installs an image file (215mb) in a folder specified by me. In the tutorials it says that i need to put the RUU_signed.nbh from the stock rom in the kovsky folder... but i don't see that file anywhere, is it the same thing as the image file installed by the exe file? Do I just rename it and proceed??? PLZ answer this if you can because i have everything else prepared to flash my phone but this is the only thing holding me back...
Click to expand...
Click to collapse
You need to extract the RUU_signed bit from the image i am having the same issue and i write software for a living. Are you following the tutorial on how to back up your rom?
video guides
Im actually following BioVolt's video guides which I think u can find on this site if u search biovolt's video tutorials? they're really good and detailed but they're kinda long.
The exe contains a .img file, just rename that to kovsimg.nbh, and copy to the root directory of your memory card, and flash it.
Stalix said:
The exe contains a .img file, just rename that to kovsimg.nbh, and copy to the root directory of your memory card, and flash it.
Click to expand...
Click to collapse
it's not for flashing it is for doing a ROM dump in all the tutorials it does'nt tell you what clearly to do with the stock ROM once downloaded. But now i know along the same lines as your idea It just needs renaming to RUU_Signed.nbh then place this in the same folder as the 4 files you have allready extracted.
I have watched biovaults vids good but a little long for me.
I am in the same situation, and I'm totally new to flashing/backing up Rom's.
I'm also following BioVolt's Videoguides to start with but can't get hold of the Stock UK Rom.
Since I purchased my phone in sweden, unbranded I perfer to use swedish stock roms (If this even matters anyway?!).
So just to get everything straight, can I just download "Generic Sweden R3AA009 Software Update" from the sticky here in the forum, extract and rename the .image file to "RUU_Signed.nbh" and use this when I'm dumping my rom or did I totally missunderstand you guys?
Thanks in advance and sorry if I'm just way off with this question.
blondyz said:
I am in the same situation, and I'm totally new to flashing/backing up Rom's.
I'm also following BioVolt's Videoguides to start with but can't get hold of the Stock UK Rom.
Since I purchased my phone in sweden, unbranded I perfer to use swedish stock roms (If this even matters anyway?!).
So just to get everything straight, can I just download "Generic Sweden R3AA009 Software Update" from the sticky here in the forum, extract and rename the .image file to "RUU_Signed.nbh" and use this when I'm dumping my rom or did I totally missunderstand you guys?
Thanks in advance and sorry if I'm just way off with this question.
Click to expand...
Click to collapse
The reason we use uk roms is cos they they are WWE(world wide english) and the kitchen needs this to dump the rom.
the one you end up with will be an exact copy of your stock rom.
Yes just rename the uk one
Allright, thanks alot! Really helped me out.
Intratech said:
Yes, if you're using the RUU method rename it to RUU_Signed.nbh if you're using the SDCard method rename it to kovsimg.nbh.
Click to expand...
Click to collapse
It's a little OT but my X1 doesn't find the kovsimg.nbh file in the storage card anymore. Why is that? I've flashed using this method for months!
Ersill said:
It's a little OT but my X1 doesn't find the kovsimg.nbh file in the storage card anymore. Why is that? I've flashed using this method for months!
Click to expand...
Click to collapse
Uhm, I'm not sure really.. But ensure that you put the "Kovsimg.nbh" in the root of the storage card, not in any other folder. Might be a stupid answer but you might have missed this lil' thing.
Good Luck, Anton.
blondyz said:
Uhm, I'm not sure really.. But ensure that you put the "Kovsimg.nbh" in the root of the storage card, not in any other folder. Might be a stupid answer but you might have missed this lil' thing.
Good Luck, Anton.
Click to expand...
Click to collapse
Checked that...could it be a matter of storage card hardware? I had few problems writing on it through the card reader.
Ersill said:
Checked that...could it be a matter of storage card hardware? I had few problems writing on it through the card reader.
Click to expand...
Click to collapse
Might be, but you still should find the file if you successfully transefered it to the storage card...
Just to be sure, you haven't reformatted your storage card recently? It has to be in the "FAT_32" format to be flashable..
Can't really think of much else that gives you these problems..
So even if I'm using the X1a i should dump my rom with the STOCKUK rom? I read somewhere that if i flash my stock rom back on my xperia after it's been dumped using StockUK rom then my phone won't be able to connect on 3G etc.? Is there any truth to that, because im finding it impossible to dump my stock software using the NAM stock rom, kovskykitchen tells me that it cannot extract the ruu_signed.nbh
bgeorgi said:
So even if I'm using the X1a i should dump my rom with the STOCKUK rom? I read somewhere that if i flash my stock rom back on my xperia after it's been dumped using StockUK rom then my phone won't be able to connect on 3G etc.? Is there any truth to that, because im finding it impossible to dump my stock software using the NAM stock rom, kovskykitchen tells me that it cannot extract the ruu_signed.nbh
Click to expand...
Click to collapse
It must be uk ROM due to it being the only one that is guarenteed WWE the kicthen won't recognise anything else and when you flash back it will be whatever stock rom you currently have.
Hello people.
I have minor problem over here, I have flased my rom before but in a different way Through the xperia x1 phone with the usb cable in, all I had to do was to install a file through the pc.
But there is another way Id like to do it now, I have a .image file and have renamed it to "kovsimg.image" and I did also install HARD_SPL before.
To make it easier for u to help me.
1. Install hard spl
2. put the kovsimg.image into the memory card
5. Remoed the USB cable
3. turned of the phone
4. Pressed down lower sound and on/off button together (I got to the correct place where there are different colors.
5. Image file not found!
At nr 5., that is where the problem is. Why does it say Image file not found?
I have also tried with .nbh file 2, occuring the same problem though.
Thanks!
The filename should be "kovsimg.nbh"
sweflo said:
The filename should be "kovsimg.nbh"
Click to expand...
Click to collapse
But in another thread that is sticky, said that it can both me .nbh and .image
So the fact that was said is wrong I guess?
Well that will not either fix the problem, before the .image I tried with a kovsimg.nbh file and had the same problem.
Thanks
Make sure the filesize is the same so you have copied the all of the file "kovsimg.nbh"
happens to me sometimes that there is missing a few megabytes and the phone dont find a image..
sweflo said:
Make sure the filesize is the same so you have copied the all of the file "kovsimg.nbh"
happens to me sometimes that there is missing a few megabytes and the phone dont find a image..
Click to expand...
Click to collapse
Im sorry but how exactly do you mean?
If you mean that the "whole" file maybe didnt get copied into the mem card?
It thats what u mean, I just checked it and both files are 213mb so :S
Check the spelling "kovsimg.nbh" and copy the file from the computer again
sweflo said:
Check the spelling "kovsimg.nbh" and copy the file from the computer again
Click to expand...
Click to collapse
Atm I am downloadin a new Rom instead, there could be wrong this this I did download..
Btw, just a simple question. If I already have flashed a rom, is it possible to flash over a other rom?
I tried to make hard_spl over the one the Rom I already have, but no difference Well I will come back with information on how it went when I am complete with the download.
Thanks for takin ur time dough
Freak174 said:
Atm I am downloadin a new Rom instead, there could be wrong this this I did download..
Btw, just a simple question. If I already have flashed a rom, is it possible to flash over a other rom?
I tried to make hard_spl over the one the Rom I already have, but no difference Well I will come back with information on how it went when I am complete with the download.
Thanks for takin ur time dough
Click to expand...
Click to collapse
You only hard_spl ones, you can make so many flashings you want but remember to do a hardreset after flashing..
did u try to search the forum?
http://forum.xda-developers.com/showthread.php?t=469300
boy, you really haven't read the stickys or haven't understand them fully...
just be glad that this flash-process is pretty stable and it's almost impossible to brick one's phone beyond revival.
read them again!
but to summarize it:
- you only have to do hard-spl once. until you flash stock-spl (that's not stock-rom!) it remains there forever.
- regardless if flashing via usb or microsd, the filetype has to be .nbh
- looks to me as if you didn't change the filetype of the image, but just the filename. so it actually is "kovsimg.nbh.image" right now, which will not be accepted by bootloader (the tricolor-screen-thingy).
check these two things before flashing again:
1. check if hard-spl was successfull:
take your sd-card out, and enter bootloader. it will now stay on tricolor screen. there it should read "SPL-0.72.OliNex". (among other stuff)
if it reads "SPL-0.72.0000" or "78" you haven't succeeded in hard-spl -> read the sticky again.
2. check the filetype of your image-file:
get your windows to show filetypes (how depends on which version, google it) and make sure the file's name is really just "kovsimg.nbh", nothing more.
(via usb-cabel it has to be "ruu_signed.nbh", btw)
put the kovsimg back on your sd-card (directly to root, meaning not into a folder), put it back in and enter bootloader again. follow the instructions on screen.
if you followed these instructions correctly, it will work now.
to flash any other roms in the future you just have to name the file right and put it on your sd-card -> bootloader. (again, hard-spl will not be needed.)
after flashing finished do a hard-reset! when flashing via sd you have to take the battery out and back in to do a restart. that's the perfect moment:
- take battery out
- put it back in
- press and hold (!) the two silver-buttons under the screen
- press the power-button shortly (while still holding the two silver ones!)
- phone will vibrate and enter a white screen
- release the two buttons and follow instructions on screen
When you downloaded the ROM did you make sure to extract it first with either WinZIP or WinRAR before you renamed the file? ALL ROMs are compressed usually with WinRAR to save time uploading. Then you download and extract the file. Then you rename the image file to the respective name on how you wish to flash your phone.
Thanks for the replies but the problem is still here :/
I checked the bootloader and it said "SPL-0.72.OliNex", which means I have installed the HARD_SPL correctly.
Atm I have Energys rom installed, but I didnt install it the same way as this way I am trying to do now. I just had to have the cable checked in and follow an installation and it was done.
Right now I have tried with several roms but none has worked, for the moment I am trying to get this rom to work "Valkyrie_v3.8 FireStorm" without success ofcourse..
I did everything correct, I know that I have. I also followed a video guide to check I made it correct.
The file name is kovsimg.nbh (Ive checked it and it is a .nbh file, my brother also confirmed it).
When I try to flash it, the USB cable is out, the phone is shut (tried to pull out the battery 2), but still the same problem "No image file!".
And yes, I did first extract the file. The size has the same amount as in the winrar file so nothing is missin. After that I changed the file name and copied it into the root of Memory card.
PS. Is this the only way to flash it, I mean is it not possible to do the same way as I did with energy's? (Its the same way as installin HARD_SPL)
Try using a different SD card.
Im Packing said:
Try using a different SD card.
Click to expand...
Click to collapse
Befor this make sure your microSD is Formatted to fat32 using a PC. If not, it will not work.
or you could just do it the same way as the energyrom
i.e. customRUU.exe
well, sounds like it's your sd-card. probably formating it again with fat32 will help. there are also reports of some sd-models/brands not working at all. there's a thread for this by gtrab, i think. although there it says "kingston" cards don't work at all - i'm flashing with a kingston 8gb for almost a year now... ^^)
if you choose to get customruu.exe for usb-flash DON'T use the one from hard-spl, that's a special one.
try remove SD card and flash without PC
The SD-cards format is Fat32, but I used a different way this time by doing as Jonny~ mentioned and it worked all fine!
Thanks for the help, great service.
Take care and wish me luck in the future with my xperia