Related
Up till last week I had a T-Mobile MDA Compact and I'd got Tomtom (bakonl) running. Now I have a Wizard (T-Mobile from The Netherlands) and I can't install the Tomtom. Appears that WM2005 not compatible with Tomtom Version 5. Anyone got a plan to get arround this? :?:
To install TTN5 on WM5 you have to copy the cab files directly to pda and launch it with the pocket explorer (or resco explorer).
a bit more info to install tomtom and get it working
http://forum.xda-developers.com/viewtopic.php?t=29606
Thanks for the responses guys. I've given it a go and moved the cab files from the CD to my SD card and installed the GPS cab first. Then soft booted the Vario and then attempted to install the TTN cab.
All per the post :-
http://forum.xda-developers.com/viewtopic.php?t=29277&highlight=ttn
However... Still won't install correctly...
Am I doing something wrong?
Any more advice gladly received.
Thanks,
you need te get the tomtom 5.1 files then it works fine. I've got it working on my bleu angel with WM5, and today i installed in on my brother's vario and it worked just fine.
Thanks,
Can I ask... Where did you get the 5.1 files from?
You can download TTN5.1 from the following link
http://www.tomtom.com/updates/ppcupd510.exe
otherwise just use a torrent search engine, you should find it in no time
dalamario said:
You can download TTN5.1 from the following link
http://www.tomtom.com/updates/ppcupd510.exe
Click to expand...
Click to collapse
You need the zip file not the exe. AS4 messes up the installation.
http://www.tomtom.com/updates/ppcupd510.zip
Dear All,
I found this update this week..
http://users.skynet.be/wallpaper/TOMTOM5.1.zip (for more info see http://tomtom3.web-log.nl/log/856067 around - Mondeo :: 20 september 2005 16:18 -).
Note : Download, unzipp... connect your PDA/Phone via Sync cabel/station, setup.exe run. (I have installed it over my (bakonl) 5.0 version.... !!!).
Note 2 : Can ONLY be used if you have a BeNeLux version of bakonl TT5 and only with the BeNeLux map (normal or plus).......
Success with the upgrade.
TomTom with WM6.1 on HTC wizard
Good Morning,
can anybody support me in trying to setup a navigation functionality on my HTC wizard, that runs WindowsMobile 6.1 (those TNT edition)?
Unfortunately i can't find up to date information about which GPS-hardware to use. Is BlooTooth the only reasonable solution for the wizard?
I also plan to feed the tachymeter signal from my bicycle somehow. Has anybody read of approaches to this and can cite or link?
Third thing I'm in search of is an alternative camera software. The "Camera for Pocket PC Version 3.00" does not support geoTagging and not even writing in the Tags for Titling, commenting etc.
Many thanks for your valuable hints in advance.
blausand
I've upgraded my BA to WM5. All seems to work fine(for now), but, my bluetooth get disconnected whem I POWER OFF my device. (Just like Broadcomm v.2900 ) Why?
Are this already fixed???
I can´t put in action Tomtom Navigator 5.xx. .
If I try to install by ActiveSync 4.x he reports me an error of Just-In-Time Debugger. If I copy all the files to my Pocket and install them directly, when I choose a map he blocks for seconds and then turn back to my today screen.
Please Help me in this issue.
Thanks
I'm having the same issue with the Tomtom5... Is there anyone who has experienced this, and can help a few needy fellows out?
Try to find it in the BA-WM 5.0-Wiki (links below in my sig).
You need to install Tom Tom Navigator 5.2. Vers 5.2 is designed to install correctly for WM5 using Activesync.
Vers 5.0 and 5.1 will not install on WM5 via Activesync. You have to copy over the files manualy.
kvee said:
You need to install Tom Tom Navigator 5.2. Vers 5.2 is designed to install correctly for WM5 using Activesync.
Vers 5.0 and 5.1 will not install on WM5 via Activesync. You have to copy over the files manualy.
Click to expand...
Click to collapse
Thanks, but, where can i find the tomtom 5.2 bakonl release?(The cracked one) :evil: :evil:
I've the activation code for TT 5.21 for benelux map .
How can I do to use Iberia map??
Because the activation code doesn't work with Iberia.
I found it
See my other post at:
http://forum.xda-developers.com/viewtopic.php?t=35698&highlight=
I love this world.
I'm finishing a wm5 application in visual studio.
In a few days i will publish it here with source code. (VB.NET)
Bye
Hello,
today I get my HTC MTeoR.
For my Exchangeserversync I need to install a other root certificate.
But the Phone had a Applicationlock.
All known solutions for other HTC Phones don't work.
Have anybody a new solutions?
Regards
sotmysoft
I got the same problem, and after speeking with both the Danish & English HTC support, they both told me to wait for a rom upgrade or check for modification to "registration database". I have now looked through the whole internet and so far nobody seems to solved the problem.
So now i have HTC MTeoR as a brick, and a HTC TyTn send back because of problems with screen and keyboard !! Well done HTC !!
Peter
sotmysoft said:
Hello,
today I get my HTC MTeoR.
For my Exchangeserversync I need to install a other root certificate.
But the Phone had a Applicationlock.
All known solutions for other HTC Phones don't work.
Have anybody a new solutions?
Regards
sotmysoft
Click to expand...
Click to collapse
I have read somewhere that you need a special Regeditor which is recognised by the HTC and then change the following Key: HKLM/Security/policies/policies
00001017 from 128 to 144
That did the job on my QTEK 8500
...what does this policy do? Mine contains the value 148...
Have read the same on the net, but does not work on MTeoR.
Peter
Churchill said:
I have read somewhere that you need a special Regeditor which is recognised by the HTC and then change the following Key: HKLM/Security/policies/policies
00001017 from 128 to 144
That did the job on my QTEK 8500
Click to expand...
Click to collapse
I think it enables you to install a certificate
The reg hack that has worked previously for other WM5 devices doesnt work on the Mteor. In fact, you get a permisison denied error when trying to change the value.
Apparently HTC are working on a new ROM but can't give an ETA :evil:
What is this?
Has someone ever tried this registry editor?
It seems to work with MTeoR, but I don't have it yet...
ftp://xda:[email protected]/Uploads/Breeze/regeditSTG2.zip
I used the one called regeditSTG but I think it is the same thing...
My device is QTEK 8500 and the regeditSTG works on my device
Confirm that regeditSTG2 DOES unlock the Mteor, but the phone will not let you copy this app to the phone or to the card- so it has to be copied from a computer directly onto the storage card before using. Then it works!
Thanks guys, this is a real breakthrough
I have found another thing in the HKLM\security\policies\policies add the following DWORD "0000101b" value 1
I found it by Modaco. There this is a solutionif you get error 57 when running some software. BUT and this is big, when I added the value my TOMTOM received a new Device ID so it asks to activate and this being the second device that I activate I have to keep on changing the value to 0
Does anyone have for me maybe cracked version of Tomtom 5 mobile v5.20 for Windows smartphones with QVGA display (not symbian)
Solution i've found was posted by Pagemakers on the Expansys forums...
http://www.modaco.com/Mteor-application-unlock-solution-t244205.html
Tested and working. Allows you to import root cert and also the stops the insufficient permissions when installing software.
MTeor unlock
howdy,
does anybody know how to unlock HTC MTeor?
seems to me that the device is unable to edit the registry.
(I'm installing a root certificate)
already installed on Qtek 8310 and 8500 but the registry on MTeor is uneditable..
Any suggestions ?
Thanks
Here is most "official" way of application unlocking of virtually any HTC produced device: one third of unlocker is made by HTC and remaining two by M$
Unzip to device and run in numbered order. Then check incoming sms folder* for the status report. If report is negative then your rom have non-default privileged OEM cert, flashing to something more standard would solve the problem.
* it is not real sms, just system notification placed in sms folder (nothing is transmitted over radio) you can perform unlocking with phone turned off and sim card removed to be shure
I've upgraded my vodafone to the at&t wm6 and iGO 2006 plus doesn't work correctly, it loads shrunken/compressed in the middle of the screen to the point of (almot) unusable, it worked fine on the wm5.
I think the problem is with the gapi, as when I tried using Morph gear with manual driver and selected gapi the screen was also compressed in the middle, and it too woked fine with gapi on wm5.
I know the GAPI is located at the gx.dll file, I can't delete or rename that file, anyone knows how to maybe put the gx.dll file from wm5 on the wm6?
Hello
I have the same Problem with I-GO and WM6
So i flashed back to WM5 :-(
treo 750v, flashback ?
I have the same problem with my treo 750v. Moreover also my phone is now locked, whereas initially I could use ith wiht any provider. I know this was nog a smart move by now. Question is how to solve this. Anybody has a clue ?
According to palm it is not possible to flash back to WM5. However I read in previous post they recovered wm5, was this also with palm 750v ?
Hope somebody can help.
how do you perform a rollback to wm5
can some help in telling me how to perform a rollback to wm5 on the treo 750v to the 1.16 firmware version.
IGO - Treo 750 - WM6 problem
Hi there!
Could you figure out something about the IGO display problem that occurs after WM6 upgrade?
I have beed playing around with the sys.txt file changing settings in the [interface] and [gx] sections. I have also tried to replace the gx.dll GAPI library with the latest one.
No success so far.
Please, let me know if you have any progress on this!
Thanks!
Solution for running iGO on Treo 750 with WM6
Please verify if the following solution works:
- Create a file in your iGO folders called sys.txt
- The file should contain the following section:
[interface]
gxoff=1
It already worked for a few Treo users.
rmplus said:
Please verify if the following solution works:
- Create a file in your iGO folders called sys.txt
- The file should contain the following section:
[interface]
gxoff=1
It already worked for a few Treo users.
Click to expand...
Click to collapse
Hi:
I would love to try this. I am somewhat of a newbie though, can you please give further instructions? I of course understood the part about creating new file, from there I got a little lost. Do I create a text document with gxoff=1 as the actual text
in it? Sorry if this is a dumb question
Thanks!
Well, am VERY happy to report, that the excellent advice given by rmplus, worked perfectly after I figured out that I had to include the entire text (I was leaving off the [interface] portion):
[interface]
gxoff=1
in a .txt file called sys.
THANKS SO MUCH
Does anyone happen to know of a fix like this for Jewel Challenge?
I am having the same problem.
Thanks!
after i did this i am getting an error:
C:\GPS_2006R3_iGOSE\firefly\base\core\ffsurface.cpp.299
Exception in EndPaint
exiting application
Hi all
I'm having exactly the same problem as gilmargolin - above. iGO 2006 worked perfectly under WM5 (one of the few programs that did). iGO Tech Support says the program is not supported on WM6, but someone must have an idea as it is only a screen resolution problem.
Cheers
kenoz said:
Hi all
I'm having exactly the same problem as gilmargolin - above. iGO 2006 worked perfectly under WM5 (one of the few programs that did). iGO Tech Support says the program is not supported on WM6, but someone must have an idea as it is only a screen resolution problem.
Cheers
Click to expand...
Click to collapse
Did you try the solution given in post# 6?
It worked perfectly for me.
cincy1020 said:
Did you try the solution given in post# 6?
It worked perfectly for me.
Click to expand...
Click to collapse
Yep - verbatim. I stored the sys.txt file in the SD card iGO folder root. If I place the file anywhere else sensible, I get a hardware error. Frustrating!
That's too bad. Not to be funny, but did you make sure to include the entire text, just as it's listed?
[interface]
gxoff=1
On my first try I left off the [interface] part, and it wouldn't work.
Good Luck
Nope - nothing so simple. Sigh...
Ugh, that's too bad. Sorry I couldn't be any help.
I resolve problem Igo 2006 on Treo 750 WM6
1. Uninstall previous iGo version from Treo 750
2. Copy install files of June iGo version on the root of SD card (folders [2577] & [iGo])
3. Start autorun.exe from folder [2577]
4.Put in [Igo] folder on SD card, "sys.txt" file with
[interface]
gxoff=1
And that's it!
It works for me.
Thanks!!!
It worked perfectly!!!
Does it work really slower then how it works regularly on WM5?
On my device there are frezzes of couple of seconds.
I tryed to install IGO 8 Navigation but it doesn´t work....
When i install it and want to run it it begins to Start and stops without doing anything...
Does anybody know how this can happen or what i can do ?
Use search feature it is very interesting feature of forums and I am 10^10^10% sure you will get an answer for your question.
NeoBrain said:
I tryed to install IGO 8 Navigation but it doesn´t work....
When i install it and want to run it it begins to Start and stops without doing anything...
Does anybody know how this can happen or what i can do ?
Click to expand...
Click to collapse
or, shorter and without useless preaching:
http://forum.xda-developers.com/showthread.php?t=397019
I am having the same problem with this program and the old program after updating to WIN6.1 from HTC on the tTyN II, anyone have any idea if their is a patch/fix somewhere, i had to un-install the WIN6.1 update and wish i could have it back as it had some great new features....
wildas2008 said:
I am having the same problem with this program and the old program after updating to WIN6.1 from HTC on the tTyN II, anyone have any idea if their is a patch/fix somewhere, i had to un-install the WIN6.1 update and wish i could have it back as it had some great new features....
Click to expand...
Click to collapse
This indicates that it`s not an Diamond problem but WM 6.1 problem ... good to know.
not a 6.1 problem, had it working on my p3300 wm6.1 touch 4. struggled though, went back to tt until i get a more powerful beast. did take a couple of attempts to get it to install and go though, just put it down to lack of resources
Does anybody managed to run iGO 2006 or iGO 8 on HTC Diamond ???
I have a solution
I have a solution for you . Download new torrent "iGO 8 - without installation.rar".
copy iGO 8 on your device , edit the sys.txt file and remove this entry :
[folders]
app="%SDCARD%/iGO8"
Now just copy what you need from iGO 2008/iGO8/content... to your device iGO 8/content...
[this files is in torrent Igo 8 - FINAL FULL + CRACK ( working licence ) zip]
tick the iGO8 application file
enjoy !
I tested on my PDA (internal memory) - working great
mark21 said:
I have a solution for you . Download new torrent "iGO 8 - without installation.rar".
copy iGO 8 on your device , edit the sys.txt file and remove this entry :
[folders]
app="%SDCARD%/iGO8"
Now just copy what you need from iGO 2008/iGO8/content... to your device iGO 8/content...
[this files is in torrent Igo 8 - FINAL FULL + CRACK ( working licence ) zip]
tick the iGO8 application file
enjoy !
I tested on my PDA (internal memory) - working great
Click to expand...
Click to collapse
What kind of PDA did you try? Dia? I think no.
Mio P560
Nav N Go iGO 8 work for me on MIO P560.
mark21 said:
Nav N Go iGO 8 work for me on MIO P560.
Click to expand...
Click to collapse
It works on all devices it seems, except on the Diamond. What you propose has been tested already, without success.
mark21 said:
Nav N Go iGO 8 work for me on MIO P560.
Click to expand...
Click to collapse
don't you read before u jump posting?!! take your mio and go brag somewhere else about how well works with iGo8...go....go...
Any solution already for iGO to run on HTC Diamon ???
Is there any "SD Card" emulator application available ???
GPSSlovakia said:
Any solution already for iGO to run on HTC Diamon ???
Is there any "SD Card" emulator application available ???
Click to expand...
Click to collapse
Lets end this thread, there is already a thread about IGO8. We should continue discussion there.
Igo 8
I am sorry to inform you, but Nav N Go iGO 8 does not support any device without SD reader.
On http://www.navngo.com/pages/global/eng/igo_8_supported_devices you can find the list of compatible devices.
Kind regards,
Balázs PALOTAI
Product Specialist E-mail: [email protected]
When replying to emails, please include any previous email correspondence
mark21 said:
I am sorry to inform you, but Nav N Go iGO 8 does not support any device without SD reader.
On http://www.navngo.com/pages/global/eng/igo_8_supported_devices you can find the list of compatible devices.
Kind regards,
Balázs PALOTAI
Product Specialist E-mail: [email protected]
When replying to emails, please include any previous email correspondence
Click to expand...
Click to collapse
I am Happy to inform you that your list is not update. you can add HTC Athena and HTC P3600 (Trinity).
interesting info: working in Athena when not installed in SD. working from microdrive.
i've also heard (hate say something from what i "heard" but if it's true is real an important piece of info) that nav'ngo will install on Diamond if you'll pay them a visit (Hertzelia, Israel). Going to pay them a visit next week and update you.
mark21 said:
I have a solution for you . Download new torrent "iGO 8 - without installation.rar".
copy iGO 8 on your device , edit the sys.txt file and remove this entry :
[folders]
app="%SDCARD%/iGO8"
Now just copy what you need from iGO 2008/iGO8/content... to your device iGO 8/content...
[this files is in torrent Igo 8 - FINAL FULL + CRACK ( working licence ) zip]
tick the iGO8 application file
enjoy !
I tested on my PDA (internal memory) - working great
Click to expand...
Click to collapse
damn! this smell like warez! here? watch out i got a warning for much less than this! i'll hate to loose you after only 3 posts!
His "solution" doesn't work either!
Probably on startup iGo checks for a SDCard reader (not the card itself) and if none exists it will exit without any further notice. This explains why can we fire up iGO without a card on devices that has an SD slot. Does anyone knows a device without SDCard (internal reader can be a trick!) reader that executes any version of iGO? Any software that can emulate a reader?
If this is the case it can be cracked easily but I cannot debug iGO8 on my device. Anyone able to do this?
cina said:
Probably on startup iGo checks for a SDCard reader (not the card itself) and if none exists it will exit without any further notice. This explains why can we fire up iGO without a card on devices that has an SD slot. Does anyone knows a device without SDCard (internal reader can be a trick!) reader that executes any version of iGO? Any software that can emulate a reader?
If this is the case it can be cracked easily but I cannot debug iGO8 on my device. Anyone able to do this?
Click to expand...
Click to collapse
smart..... stay with us please
i like the idea of fooling the igo, making think that there is a sd reader somewhere in the vicinity... makes sense. that's why athena can use igo...