Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
What headset are you using?
Does it have a delay without a headset?
On mine I get a delay with a headset that supports the handsfree profile (Jabra BT800) but not on a normal one, or without a headset.
My XDA2 did this also, but the XDA2 with WM2005 worked perfectly.
could be the time needed to find/load the ringtone ?
do you have caller id or ringtonex with different ringtones and/or pictures?
maybe loaded from memory card ?
audiblefrequency said:
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
Click to expand...
Click to collapse
I have the same problem with mine... I only get three rings to answer the phone - which can be pretty annoying!
I've not noticed whether having any form of headset makes a difference, though.
Ringing Delay
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Re: Ringing Delay
LYNDONSLANN said:
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Click to expand...
Click to collapse
I have the same problems and the bluetooth flattens the battery in 4 hours. I used to have the XDA II with Sins cooked 2K3se and it was perfect, unfortunately I gave it to my son who won't give it back.
Hey, I have same problem, I got the latest ROM, and since then it got even worse. Does anybody knows how to fix the problem, modify ROM, or something, PLEase help.
Thank you.
the only solution i have to date is to change the answerphone delay, you can find your networks status codes here:
http://www.expansys.it/forumthread.asp?code=K700&thread=72
i changed mine to 30 secs to give me a better chance!
cheers
I have a serious problem with my new diamond....
When I get an incoming call, I often miss the call because the phone is really slow to ring/vibrate...
I can see that at least for two of callers rings before it rings/vibrates on my end, the touch pad lights up/flashes. But unless you are physically watching your phone all the time, you have no chance to react in time..
Especially becase the lag-of-death os (wm6) takes eternity to figure out that Im actually frantically pressing 'answer call'
Is there some sort of registry hack for this?
Disabling the phone skin helps (download Schap's Advanced Config) and gives you back about 10Mb of memory. Also, some people say that moving from a .wav ringtone to an mp3 helps. I've not tried the latter but it certainly helped on previous PPCs.
Don't have any suggestions for your problem, but I do have a question of my own:
Who hangs up after 2 rings!?!
Who designs a phone that doesn't ring the first three times and then starts ringing? What's the point?
aydc said:
Who designs a phone that doesn't ring the first three times and then starts ringing? What's the point?
Click to expand...
Click to collapse
And the answer to that would be - HTC
BTW just a suggestion, if it might help ...
You can set alerts for missed calls - Start - Settings - Sounds and Notifications.
So.. in case someone does give you a missed call (one or two rings and then disconnects) - you will be notified with a sound. As opposed to pulling the phone out of your pocket - after 30 minutes and then noticing that you have a few missed calls from people who disconnected after 2 rings
Hope this helps.
the thing is that when the phone starts ringing, I need to react... it does actually happen that it is not in my hand, but on the table somewhere etc..
then by the time it rings the second time I get to it, and press answer.. wm6 then takes 2 years to figure out that the moron holding the phone has actually pressed te button..
by then its up to at least 5 rings on the other end... then a lot of people hang up...
what I would like was to tweak the phone to ring immedeately instead of the initial blinking for two rings...
yea someone do help out in this aspect please...
i for one have free incoming call.. so its pretty wasteful to call back a missed call when actually i could have answered it fast enough..
and im using a mp3 ringtone.. din see much improvement..
As told before: seems the diamond dialer interface is causing most of the pain. disabling it makes it respond faster.
but maybe...
someone made a custom VGA version of our Diamond dialer skin: http://forum.xda-developers.com/showpost.php?p=2365614&postcount=16
perhaps if we install this we get our Diamond skin back but without delay (???). it's worth a try, I will try it later.
disadvantage: 5 Mb extra storage space consumed.
I just did some testing on my Diamond.
I have a .wav as ringtone, am using the new dailer interface and am not using TF3D.
The phone starts ringing after the caller hears the second ring on his end, not too bad is it?
Also, I noticed disabling the new dailer interface also disables the "flip the phone to mute" option?
yes its bad.. or not good enough...
did you notice that the ring on your diamond is in fact blinking for those two first rings?
So the phone knows someone is calling you, but delays the ringing?
It's really not that big a deal..
I mean.. so it rings a few seconds later... I mean.. err.. compare that to.. NOT BEEPING AT ALL when you receive an SMS (thanks for the tweak) or an EMAIL (hoping to find a tweak)..
Yeah, it's a problem.. just not that big a problem.
you can setup notifications in the advanced section of the sounds menu.
and even if you couldnt I dont see how one flaw should excuse another?!
kurgandk said:
you can setup notifications in the advanced section of the sounds menu.
and even if you couldnt I dont see how one flaw should excuse another?!
Click to expand...
Click to collapse
Mate, you SERIOUSLY think that there were tonns of people who DIDN'T think of setting up the Sounds and Notifications Menu!!
Needed a registry tweak (for the SMS) and as far as I know, some are still having a problem with the Email (auto retrieval) - notification.
More importantly, nobody is saying that the delayed ring IS NOT A FLAW..
I just said.. a few seconds delay is not THAT big a deal. It's not a matter of EXCUSE one FLAW by looking at the other. Definitely not. A problem is a problem. I was just highlighting that a few seconds delay in notification is not THAT BAD as opposed to not being notified (by a sound) AT ALL
L o r d R a j said:
Mate, you SERIOUSLY think that there were tonns of people who DIDN'T think of setting up the Sounds and Notifications Menu!!
Needed a registry tweak (for the SMS) and as far as I know, some are still having a problem with the Email (auto retrieval) - notification.
Click to expand...
Click to collapse
hmm what can I say it works here, ive setup a sound, that pings when theres new mail, and then a little later it vibrates...
More importantly, nobody is saying that the delayed ring IS NOT A FLAW..
I just said.. a few seconds delay is not THAT big a deal. It's not a matter of EXCUSE one FLAW by looking at the other. Definitely not. A problem is a problem. I was just highlighting that a few seconds delay in notification is not THAT BAD as opposed to not being notified (by a sound) AT ALL
Click to expand...
Click to collapse
well for me its bad, and theres plenty of other people that feel likewise..
I agree it is bad and would also like a solution.
Most people who ring me get two rings before my phone even plays the MP3 and 2 rings later the answer phone kicks in.
It would be nice if the MP3 played as soon as the LED flashed like it should..
kurgandk said:
hmm what can I say it works here, ive setup a sound, that pings when theres new mail, and then a little later it vibrates...
Click to expand...
Click to collapse
Well Good for you.
kurgandk said:
well for me its bad, and theres plenty of other people that feel likewise..
Click to expand...
Click to collapse
**** happens. All the best.
RSkillz said:
I just did some testing on my Diamond.
I have a .wav as ringtone, am using the new dailer interface and am not using TF3D.
The phone starts ringing after the caller hears the second ring on his end, not too bad is it?
Also, I noticed disabling the new dailer interface also disables the "flip the phone to mute" option?
Click to expand...
Click to collapse
what do you mean with " new dialer interface", the white Diamond interface that comes with the diamond ROMs or the cab file I referred to?
pietrucci said:
what do you mean with " new dialer interface", the white Diamond interface that comes with the diamond ROMs or the cab file I referred to?
Click to expand...
Click to collapse
I mean the default dailer interface m8. I'm calling it the 'new dailer' because the tweak set you back to the old one (default WM6.1).
Sorry for confusion
Ok you guys and dolls with the slow response: what ROM are you using?
I use the 1.93 (from Walshieau) en did the test many times today with the diamond dialer active. Result: the moment the phone goes over my Diamond responds. Exactly at the same time!
I did it with the device on, device off, waited 10 minutes, all the same result: immediate answer.
Are there any guys who use 1.93 and experience the delay or am I the only lucky bastard?
BTW: I use radio 1.00.25.05
I past this one in raphal too.
maybe some diamond user have the same problem?
when i get a incomming call. and talk with them, the sound cuts from time to time..
its realy annoying, it is some fix to this?
yes I have the same problem
The ppc stops when the phone conversationis on and it goes for reset
I am eagur to get it rectified
Please help me
(Having your phone in vibration mode) Have you guys ever experienced the 5 sec mail notification vibrating in the middle of calls annoying both you and the caller??
The Japanese phones over here usually disable vibration notifications during phone conversations by default...I'm confused as to why the Diamond does not act the same way...
Has anyone else experienced the same? If so, is there a solution to this problem?
Was anyone able to figure this out? or I am the only have this issue
Lavish P said:
Was anyone able to figure this out? or I am the only have this issue
Click to expand...
Click to collapse
Nah.. i have this problem as well.. it gets pretty annoying when there's a constant buzzing while I'm trying to talk... lol...
A similar thing happens when an SMS is received while i'm on a call..
Unlike the other non-windows phones i've had where it might simply make a beep, my diamond actually plays the entire SMS ringtone from the speaker over the voice of the person who i'm talking to.... (I dont know if the other person actually hears it...)
hopefully someone has a solution to either of these problems....
Hi Everybody.
I wonder if anyone has the same problem: the thing is that after the Gingerbread update made to my Optimus black, whenever I make a call or receive a call, the first 2-3 seconds my mic is mute. I mean, the other person doesn't hear me for 2-3 seconds and almost all the time I get "some critics" because I don't salute, especially from my wife
So, does anybody else experience something similar? Is there a fix for this?
Thank you.
Try using "call delay patch". Its available in google play!!
Call delay patch is your answer....
search button..... just do it.....
Thank you all for your answers, but after days of testing with the app, the problem still persist on my phone