Take stylus out during phone call - error - Touch Diamond, MDA Compact IV General

Hi,
I recently installed Orneta Notepad Mobile, and after installing that, when I am talking on the phone and take out the stylus, instead of the Notes thing popping up, I now get this message:
"<filename.pwi>"
There is no application associated with "<filename>". Run the application first, then open this file from within the application.
I'm fairly certain it's because Notepad Mobile changed the file association for .pwi files, and so I tried changing the file association for this in Advanced Config -> File associations -> .pwi to \Windows\notes.exe, but that didn't help... any suggestions? Prefer not to do a hard reset if I can (bit lazy at the moment ), many thanks in advance!

It happened to me too. What I did was:
1. create a note with notes.exe
2. with resco explorer, open with... '\windows\notes.exe' and register it as default app to open pwi files
hope it helps

Related

Help! File Explorer freezes upon opening!

For some reason, I'm not sure why, when I open File Explorer it just hangs. It keeps loading. I have to go to Memory and end the task. File Explorer always opens up on \Windows. It's probably because the folder is so huge but I'm sure it's something else. Because it crashes I'm not able to install anything else since I can't browse folders. Can any of you guys help? At least for starters, is there a registry key I can change to not make it try reading \Windows at startup?
Okay, I found the regkey and changed start location to "\" and it works now. I still don't know I can't access the windows folder though. it'll hang my system until i can get to my PC and use the remote registry editor.
can somebody recommend a good alternative folder browser?
CLShortFuse said:
For some reason, I'm not sure why, when I open File Explorer it just hangs. It keeps loading. I have to go to Memory and end the task. File Explorer always opens up on \Windows. It's probably because the folder is so huge but I'm sure it's something else. Because it crashes I'm not able to install anything else since I can't browse folders. Can any of you guys help? At least for starters, is there a registry key I can change to not make it try reading \Windows at startup?
Okay, I found the regkey and changed start location to "\" and it works now. I still don't know I can't access the windows folder though. it'll hang my system until i can get to my PC and use the remote registry editor.
can somebody recommend a good alternative folder browser?
Click to expand...
Click to collapse
Total Commander will do the job nicely. BUT honestly I would do a hard reset as if you continue with that problem it will make life a misery in the future and indeed corruption on the windows directory could interfere with other things too.
It's also probable that the likes of Total Commander might also hang.
Unlike the TyTn 1 the Kaiser should open up the Windows directory failrly quickly.
Mike
Hello,
really sorry to reopen a thread which might seems outdated but I have the same problem with a WM6.1 HTC Touch Viva T2223 and I can't find the registry key which is involved...
Could someone please tell which registry key indicates windows mobile file explorer start directory ?
Many thanks
Suricat said:
Hello,
really sorry to reopen a thread which might seems outdated but I have the same problem with a WM6.1 HTC Touch Viva T2223 and I can't find the registry key which is involved...
Could someone please tell which registry key indicates windows mobile file explorer start directory ?
Many thanks
Click to expand...
Click to collapse
Here are two fixes:
Using a registry editor:
HKCU>software>microsoft>file explorer>Local Path (change \Windows to just \)
Last location on 0 (zero)
Reset
And if that doesn't work (this fixed my issue),
then open File Explorer
Click on Menu>Sort> change it to Name

Reading/Editing Notes (PWI) files on the PC

Sorry if this has already been covered but I didn't get any hits searching for it.
When I used WM5 I could always read and edit NOTES from the PDA on the PC using MS Word, I just double clicked the file and it opened in Word as an INK file, but since upgrading to the Kaiser this is no longer possible with a double click, I now have to open word first then open a .PWI file?
Does anyone else have this problem?
Sorry if this is covered by another thread. My search did not give me those data.
Dave... said:
Sorry if this has already been covered but I didn't get any hits searching for it.
When I used WM5 I could always read and edit NOTES from the PDA on the PC using MS Word, I just double clicked the file and it opened in Word as an INK file, but since upgrading to the Kaiser this is no longer possible with a double click, I now have to open word first then open a .PWI file?
Does anyone else have this problem?
Click to expand...
Click to collapse
I could never read notes in my PC except by putting them on the main memory and syncing to Outlook.
I discovered I can copy the notes (PWI) to a folder in my old PC (XP) and double-click them to be open in Word, but nothing happens.
On my new PC, (Vista) they are unrecognised, directly, so the type of file is not supported by any app.
But today I could open a TextMaker empty session (I use SoftMaker office for working in my PPC and also have the version for PC) and then I dropped into it one of my notes stored in a folder in my PC. It opened well and I could read it. I think it does not support images, as I had some problems to read/copy/paste info from a blank note which had a small text and a drawing.
If this works, this helps not to synch the notes from a storage card, but for reading them if they're copied to the PC.
You can make ActiveSync automatically convert .pwi files to .txt or .rtf by opening ActiveSync, and selecting Tools > Advanced Tools > Edit File Conversion Settings. In the 'Device to Desktop' tab, select 'InkWriter/Note Taker/Notes Document', click Edit, and change the format to .txt or .rtf.
amikula THANKS to your post I finally solved my problems!! thanks!!!
Could you please tell us aswell how you solved the problem. Thx
just as amikula said!Thanks great solution.Thank you!!!
Hey all. I have changed to a HTC phone that doesn't have .pwi files. I still need to read/convert my HTC HD .pwi files. I am on Windows 7. Anyone?

How to Change File Associations in WM 6.1

I recently upgraded my Acrobat Reader without uninstalling the former version. Everything worked fine. Then I uninstalled the old version and it seems to have taken the file association for PDFs along with it. While looking for a solution, I found a lot of complicated schemes to modify the registry (no thanks), install a tweak program and do it from there (better, but why complicate things), etc. But it was actually quite simple. So for anyone who's in a similar predicament...
Here's how to set a file association in WM 6.1:
1. Open File Explorer and find a file of the type you want to associate to an app.
2. Hold down the stylus on the file name for a couple seconds (til you get the context menu) and choose "Open with program..."
3. Choose a program from the list on the top part of the resulting window, then check the box labeled "Associate selected Program with this file type."
4. Hit Open.
5. You may get a message to overwrite current association if there was a previous app associated with the file type, chances are you'll want to go ahead and overwrite so it will remember the association you prefer.
You're done!
This works great if you want to open some multimedia files with one program and others with a different program. For instance, I couldn't get Media Player to open my .AVI files, but it was the default association, now I set .AVIs to TCPMP and all is working great! ( I know TCPMP is one of the few programs that lets you set the association, this is just an example - and it was actually easier doing it as described above!)
That menu option's not there
I've got 6.1, but "open with program" is not a choice that pops up. I looked under properties, and it's not there either. Are you using a 3rd party file explorer?
You need File Explorer Extension, here http://forum.xda-developers.com/showthread.php?t=421723&highlight=file+explorer
Nice!
Thanks for the tip!
I have a several different media players, and this is just what I needed to choose which program opens what file type.
Thanks again!
Thanks guys, really good software that complement very well the unfinished software of Microsoft..
Great for removing the "DocsToGo" association!
I was really getting sick of being unable to open email attachments because I didn't choose to shell out for the DocsToGo bloatware on my AT&T Fuze. Great fix!
Thanks!!!!
MadSci
Thanks for the software but there is a problem
The file explorer is amazing. But I am facing a problem. I have an HTC Touch 3G running windows mobile 6.1. When I use this file explorer to change the file association, it successfully changes. However, the icon of the program it is associated with doesn't appear on the left of the file name. Only the windows icon appears to the left of the file name. However whenever I click on the file, it does open with the required software/player. But because the icon of the file type it is associated with does not display, it becomes slightly confusing for me to make out with which software will it open.
Thanking you in anticipation for the help!!
thanks a lot
FExplorer ext is a gr8 tool. It solved my file association problem for .jpg files.
Thank a lot again.
I tried to install FEE on my WM6.1 smartphone (non touchscreen) but it gives an error and won't install saying it's not designed for my device.
Has anyone found a way to install it, or found a similar free product to change file extensions?
I tried to install FEE on my WM6.1 smartphone (non touchscreen) but it gives an error and won't install saying it's not designed for my device.
Has anyone found a way to install it, or found a similar free product to change file extensions?
Click to expand...
Click to collapse
Schap's Advanced Config can also change file associations, as can Total Commander.
DaveTheTytnIIGuy said:
Schap's Advanced Config can also change file associations, as can Total Commander.
Click to expand...
Click to collapse
Thanks, I'll have a look at those.
There's any way to Vito SMS chat instead default WM app for SMS managemment ?
Thank you
very very thnx to you
still not the correct icons ?
same as @sahilhshah.
Changing the file associations in either described way is working fine. But the icons are still the windows system icons.
Interestingly viewing the icons from the files which are not corrected to the specific program icon, in the taskmanager, I can see the right icons.
Any ideas?
Using Total Commander for Pocket PC u can change file association and file icon as well, it will be coresponding to specified program. Just give it a try
(That's my firsth post on this great forum )
Hi people.
Could you help me? I tried to change the file association, as explained, but my phone isn't touch screen (is a Samsung Jack) and the File Explorer Extension doesn't work.
Someone know a way for change the file association on Win 6.1?
I lost the association when try Foxit pdf reader. Now I have to open the Adobe PDF fist and open the file by the program (I already uninstall the Foxit).
Thanks in advanced.
brneluz said:
Hi people.
Could you help me? I tried to change the file association, as explained, but my phone isn't touch screen (is a Samsung Jack) and the File Explorer Extension doesn't work.
Someone know a way for change the file association on Win 6.1?
I lost the association when try Foxit pdf reader. Now I have to open the Adobe PDF fist and open the file by the program (I already uninstall the Foxit).
Thanks in advanced.
Click to expand...
Click to collapse
You can change the name and the file associations using Total Commander ( for Smartphone )

Opera 9.5 beta- path for touchflo bookmarks?

Ive installed the latest opera beta and used various aps to have the new version of the browser (not the one that came with the phone) launch from the touchflo3d menus. However, it still seems to be displaying the bookmarks from the old opera, when I edit bookmarks in the new beta they don't display on the browser touchflo tab.
For now, I copied the opera6.adr file from the beta 9.5 application data folder and overwrote the .adr file in the windows programs directory where the standard opera that came with the phone stores its files.
However, is there a registry edit or app that will allow me to edit the path to the bookmarks file that touchflo uses in its interface?
VistaVick said:
Ive installed the latest opera beta and used various aps to have the new version of the browser (not the one that came with the phone) launch from the touchflo3d menus. However, it still seems to be displaying the bookmarks from the old opera, when I edit bookmarks in the new beta they don't display on the browser touchflo tab.
For now, I copied the opera6.adr file from the beta 9.5 application data folder and overwrote the .adr file in the windows programs directory where the standard opera that came with the phone stores its files.
However, is there a registry edit or app that will allow me to edit the path to the bookmarks file that touchflo uses in its interface?
Click to expand...
Click to collapse
I have a similar problem. How can someone replace the link in the touchflo tab of internet in order to point to a different browser and not the standard coming with HTC TD?
THANXX
anybody? I am having the same problem
Hi!
I had this problem and eventually found that it is hard-coded in one of the LUA scripts. Sorry, don't know which one from memory. I tried decompiling this script, but I could not get it compliled again - even without changing a character.
So I'm sorry to say that you can't do it that way.
There IS however something you can try:
Open Opera and type opera:config in the title bar.
Under "Saved Settings" and "User Prefs" there's a bunch of paths you can modify.
You might try the "Opera Directory" path under "User Prefs".
Hope this helps.
From a quick look at the first-boot-scripts it seems that the opera6.adr file is placed eventually in \windows\opera9\opera6.adr.
The default bookmarks are cooked in in a file \windows\_opera6.adr and when you first turn on your phone it copies / moves the file to \windows\opera9\opera6.adr. The path also comes up while searching through several _manila files so that also seems to be the location where TouchFlo is looking for the bookmarks.
If you want that Internet tab to be integrated with _another_ browser you have a lot of Decompiling, recompiling, editing of LUA code and hex-editing work to.
Changing browser to point to Opera Mobile 9.5 beta
Someone else posted this & I copied into a Word doc, so I apologize for not giving proper credit:
All you need to do is to modify a file named “InternetPortal-en-US.xml” which is located in \Application Data\Manila. Use the freeware application Total Commander to navigate to this file and once you locate it press the pen/paper icon on the bottom of the page and that will open the file on the screen so you can edit it. Just so everyone knows, we’re not tweaking the registry here. I’m just using Total Commander because it is more powerful than File Explorer so don’t be afraid of it
Ok, once the file is open in Total Commander just add one of the following lines after the line <InternetPortal> which is towards the top:
Opera is:
<BrowserExe>\Windows\OperaL.exe</BrowserExe>
mobile\OperaL.exe</BrowserExe>
Internet Explorer is:
<BrowserExe>\Windows\iexplore.exe</BrowserExe>
SkyFire is:
<BrowserExe>\program files\skyfire\skyfire.exe</BrowserExe>
Iris is:
<BrowserExe>\program files\iris browser\irisbrowser.exe</BrowserExe>
I installed Opera Mobile 9.5 beta to my storage card, so my new path is:
<BrowserExe>\storage card\program files\opera
*Note if you can't save your changes - make sure that the file isn't set on "read only" (click the hand holding the paper icon and uncheck the "read only" box. You may have to click twice to remove the setting)
Yeah I do not see that file anywhere
I have the Sprint branded HTC Diamond and the \Application Data\Manila folder does not exist, I am using Total Commander.
lissa8869 said:
Someone else posted this & I copied into a Word doc, so I apologize for not giving proper credit:
All you need to do is to modify a file named “InternetPortal-en-US.xml” which is located in \Application Data\Manila. Use the freeware application Total Commander to navigate to this file and once you locate it press the pen/paper icon on the bottom of the page and that will open the file on the screen so you can edit it. Just so everyone knows, we’re not tweaking the registry here. I’m just using Total Commander because it is more powerful than File Explorer so don’t be afraid of it
Ok, once the file is open in Total Commander just add one of the following lines after the line <InternetPortal> which is towards the top:
Opera is:
<BrowserExe>\Windows\OperaL.exe</BrowserExe>
mobile\OperaL.exe</BrowserExe>
Internet Explorer is:
<BrowserExe>\Windows\iexplore.exe</BrowserExe>
SkyFire is:
<BrowserExe>\program files\skyfire\skyfire.exe</BrowserExe>
Iris is:
<BrowserExe>\program files\iris browser\irisbrowser.exe</BrowserExe>
I installed Opera Mobile 9.5 beta to my storage card, so my new path is:
<BrowserExe>\storage card\program files\opera
*Note if you can't save your changes - make sure that the file isn't set on "read only" (click the hand holding the paper icon and uncheck the "read only" box. You may have to click twice to remove the setting)
Click to expand...
Click to collapse
I saw this as a solution to make 9.5 default if you lose 9.5 as the default browser. Are you saying if I upgraded to 9.7 beta, this process will make my 9.7 bookmarks the bookmarks in the TF3D internet tab?

Setting File Associations

Hello all,
I've done countless searches, but can't teach myself how to set file associations on my G1.
I have Text Edit and ASTRO installed and would like to be able to put a shortcut to a text document on my home screen that would automatically open with Text Edit. Right now that ASTRO-built shortcut comes back with an option to open it using File Viewer or HTMLViewer, neither of which allows editing.
There is no provision in Text Edit to register itself as the default text app.
Also, if I put a shortcut to an .XLS file on my desktop, ASTRO intercepts it and says "No activity is available to display this file type." However, if I put a shortcut to a .DOC file, it opens happily with the installed DocsToGo app. It seems the .DOC filetype was registered by DocsToGo but the .XLS is disconnected somehow. My fault or theirs?
(I know I can create a DocsToGo Recently Used folder on my home screen, but I want to skip that step of opening another folder...)
How can I set these associations so they will open with the app I want? I'd be happy if the O/S intercepted it and at least gave me a choice instead of dumping it back with "No activity..."
I've dug a little into the ASTRO File Types screen, but it's not very intuitive...
Thanks.
It may be astro thats causing the problems. try another file browser such as estrongs file explorer
B-man007 said:
It may be astro thats causing the problems. try another file browser such as estrongs file explorer
Click to expand...
Click to collapse
OK, I've uninstalled ASTRO and have installed ES File Explorer and can now launch .XLS files just by clicking on them so it seems ASTRO didn't know what to do but ES does.
It seems ES even has a built-in text editor so perhaps I can do away with the Text Editor app also.
The problem I have now is putting a shortcut to my document/spreadsheet on my home screen; ASTRO allowed this but is now gone.
How does Android store the file heirarchy for system folders like this? I understand C:/Users/Dave/Desktop et al, but can't find a way to paste a link/shortcut on my G1.
Ideas?

Categories

Resources