Hi all! I am trying to modify the autocorrect file, though I am running into some issues.
1. I cannot modify the file using Total Commander to uncheck read only
2. I believe because of #1, I am unable to copy the autocorrect file back to the Windows directory, as I am receiving an access denied error.
Has anyone had a successful experience with this? If so, please help me!
Thank you so much.
(I copied this from another forum because I accidentally posted in the wrong forum, please mods..don't kill me. )
Related
hello folks,
I'm running a TILT with HTC ROM.
I am trying to make some changes to system files located in the
windows directory. attributes are read only and I cannot find a
way to make changes to that. I've searched the forum but didn't
find anything. if anyone knows of a way to delete/change the read only
attribute on winmo 5 windows directory please point me in the right
direction.
thanks!
If the items you are trying to modify are built into the rom, you can see them but they can not be modified.
The items specifically i'm trying to modify are
the 0_in and 0_out files with in the windows directory
that are used for keyboard sliding sounds. i've read
previously about people using customer slide sounds
and just replacing the ones inside the directory with
the newly formed files.
I asked the question more generically incase anyone
else wanted information on the same subject for
different reasons.
update: Changed rom files!
I was doing some digging and I figured out how to
change over files that are baked onto the rom.
I did so by using Totalcommander. which is a shareware
file system. says it also has a built in reg editor
but ive yet to figure out how to open that
feature...if anyone else uses totalcommander
let me know how to start its regediting functions.
I havnet used total commander in a while, but i believe its in a directory "//" with no name.
GinjiVitis said:
The items specifically i'm trying to modify are
the 0_in and 0_out files with in the windows directory
that are used for keyboard sliding sounds. i've read
previously about people using customer slide sounds
and just replacing the ones inside the directory with
the newly formed files.
Click to expand...
Click to collapse
Two thoughts - I've got a control panel for the sliding sounds where I can change the sound associate with the slider. Is that not working?
Are you trying to replace the files using File Explorer or something like Total Commander? FE won't do it, but TC or one of the extended file explorers should. Note that you won't really be replacing a file in ROM, and if you ever delete the one you add the one in ROM will "magically" reappear.
If you want to overwrite files in the Windows directory, Resco File Explorer does this beautifully!
Fin
bump...im having trouble editing files on my phone from activesync and i want to know how i can disable the "read only" on these files...can anyone help?
Use total commander
Click on the file properties and uncheck "read only".
Edit or overwrite them
I have just purchased an HX4700 and downloaded a WM6 rom....there are some very talented people out there. I have searched the web for any other rom to get the 'transcriber' functionality back but am not having any luck. I apologise if there is already an entry about this however I have not found it.
I did down a CAB file and copied to my pda, clicked on the setup...got a screen like html text, did a soft reset but nothing changed. It was called MS_transcriber. Any help would be very much appreciated.
Read this and this.
Download.
Thankyou CWKJ for the help.....excuse my ignorance but I'm not sure where to go with the info in the other threads.
I am running wm6.1. I extracted the 'Input Method Fix' and copied the files to my PDA. I then double clicked on the '_setup.xml' file and a list of text like html ran. I then did a soft reset of the device but the transcriber functionality is not listed as a input option.
Do I need to physically alter the registry file and if so how? I have done it on a PC many times but not a PDA.
thankyou for your patience.
By installing the cab, the registry should be correct.
There are tools like TotalCommander (freeware, google and you will find) which I use can help read registry, but do not try to meddle registry for new comers.
For both Recognizers, check if msim.dll is in \windows\ directory.
For Transcriber, check if TranscriberSip.dll is in \windows\ directory.
Using file explorer to check the files may not work as the files may by hidden. If you cannot find them, use TotalCommander as file explorer to check.
If it is not there, I will send them to you, and you just need to copy them into \windows\ directory.
I downloaded total commander. Ran a search for the "TranscriberSip.dll" file however could not find it.
I would appreciate it if you could send it to me thanks.
Shane
.....I had changed the preferences to look for hidden files as I did find the "msim.dll".....still need the "TranscriberSip.dll" from you if you could assist.
Tks, Shane
27/5/08: Disregard my last as I have solved the Transcriber issue. Was a *.cab install issue.
Tks again for the help.
i was messing around with this file to try to increase my voume by just a lil bit, and in the process deleted my backup. if anyone has this file please post it, my volume is now really really quiet and i don't remember how to undo waht i did :{
Use the search function!!!
my bad :{ im a lil stressed out.
FatalCharade said:
i was messing around with this file to try to increase my voume by just a lil bit, and in the process deleted my backup. if anyone has this file please post it, my volume is now really really quiet and i don't remember how to undo waht i did :{
Click to expand...
Click to collapse
http://www.mediafire.com/download.php?3jmyiltg2oq
Hi:
I used this file to increase volume on my Fuze. Seemed to work very well for me.
Hope this helps.
Just delete the file you have there, soft reset, and the original will come back by itself
Thanks for posting the files guys! I'm running RRE, and my mic is way out of whack. I've had many complaints of noise while I am on the line. I'm hoping that restoring my audiopara3.csv file will fix the problem. BUT, I am having serious problems extracting the file in order to synch it to my phone. Is there a trick that I'm missing? I can't even get the file to show up on my desktop after I move it. Should I only be replacing the audiopara3.csv file? Do the other audiopara files have any impact here? TIA guys. I really appreciate your responses.
Not sure if the audiopara has hidden/system attributes but to convert back to stock, del in windows dir and soft reset. The system will revert to stock settings.
BTW if you have one to play with just copy it from the SD to the windows dir using TotalCommander and leave AS alone.
Thanks tyguy. I am using total commander. I went and selected audiopara3.csv, but after I tell the phone to delete, it gives me a warning window:
Could not delete 1 file(s)!
Any idea what could be causing this to happen? From what I've been reading, it should be pretty easy to either overwrite / delete this file, so I don't know why I'm having so much trouble.
Most likely it is in use. Check the TC settings that you are permitted to see/access/delete system files.
Try to rename and delete
I'm running Total Commander/CE v2.51
The only TC settings I have are language settings.
I checked the file attributes for audiopara3.csv, and they are set to 'read only' and 'in ROM'. When I uncheck the read only and save, the next time i check the file properties, the check box reverts back to being selected. I might need to revert back to the stock ROM if I can't get this audio stuff to work.
I don't have the original anymore, but this one really helped, it's loud and no distortions. Unzip first.
squirrel, did you try to rename or move it using TC?
Worked for me all the time.
i get the same error when trying to rename, edit, or move.
I'm happy to be able to report some resolution. What I was able to do was copy the entire zip file to my phone with all the audiopara files that herg posted on the last page. Then, using totalcommander, I was able to extract the files one by one to the windows directory and overwrite the files. Thanks for all of your help guys! Everyone who had to put up with the static while talking to me sincerly appreciates it!
Hey all I have a X1,
I want to know how to replace files in the Windows folder, can anyone help me out?
Any help at all will be greatly appreciated
MOD EDIT - Moved to General discussion as not related to rom development
can anyone help?
Total Commander: http://www.ghisler.com/ should work
I myself prefer Resco File Explorer...i haven't done a "windows" file replacement in a while, but I believe that method works
Don't forget to enable hidden files (just in case you aren't seeing something)
I will try it out right away, thanks a lot for the reply
Hi guys,
I've done a search for previous posts on this but with no results.
Could someone please help me?
When attempting to copy a file from
<PDA>\Windows to PC ...
Window Title : Error converting file
Cannot convert file <filename>. Access is denied.
TIA
Annette
Try moving the file to another spot on the phone and then copy to the desktop.
Re: Access is denied
Thank you ChumleyEx.
It works for some files but not ones with +H +R +S and in ROM,
even after -H -R -S. Is this by default in WinCE 6.1?
Basically, I had to manually uninstall an app and rip it out off the Registry,
when I came across this annoyance. Obviously, I can't delete files in the ROM
but I can't even copy them. I was just wanting to copy dlls to my PC so that I could check their Properties to determine their function, version and company info.
Is there a way to do this perhaps using another app?
I'm using Total Commander.