Hi,
The wireless network we have at work requires us to first connect to the network (the easy part), then open a web browser (Opera) to login. In my Opera under Settings->Privacy->Password management, I've saved my username and password, however it doesn't auto-fill the form like it should on other websites. I've also had this problem on my laptop (auto-fill doesn't work), so was wondering if there's a script or software or something for me to automatically login instead of having to type in my username and password every time?
Looking at the login website, it says it's a Cisco Wireless Network (presumably that's the router used).
Thanks
dan168 said:
Hi,
The wireless network we have at work requires us to first connect to the network (the easy part), then open a web browser (Opera) to login. In my Opera under Settings->Privacy->Password management, I've saved my username and password, however it doesn't auto-fill the form like it should on other websites. I've also had this problem on my laptop (auto-fill doesn't work), so was wondering if there's a script or software or something for me to automatically login instead of having to type in my username and password every time?
Looking at the login website, it says it's a Cisco Wireless Network (presumably that's the router used).
Thanks
Click to expand...
Click to collapse
Did you try for example a MortScript-based solution? (I don't think a GET-based solution would work, instead of the default POST-based one. You can, however, give it a try too, if adding the full URL, along with your l/p, as a bookmark, isn't a problem.)
Menneisyys said:
Did you try for example a MortScript-based solution? (I don't think a GET-based solution would work, instead of the default POST-based one. You can, however, give it a try too, if adding the full URL, along with your l/p, as a bookmark, isn't a problem.)
Click to expand...
Click to collapse
The POST-based is probably the most simple solution actually - going to give that a try now on my laptop. As far as MortScript goes, I think it'll probably work, but I do need to get around to learning it first.
Quick question without going into the MortScript documentation - how would I go about either calling Opera, or ideally, send a http command through a script? I'm an engineer and part of my job IS programming, but don't program for any web-based stuff so a bit lost there...
Edit: nevermind, reading the MortScript manual now, seems fairly easy to follow, will try to figure it out myself instead of wasting people's time here
Oh, just tried the POST idea on my laptop, works great! Thanks! Now time to look at MortScript me thinks
Related
I need access to a direct ftp port with the http://65988.0023.XXX style connection but I can't get access to it unless I am using WIFI? what setting can I change to stop this?
try disabling the proxy settings, sometimes bypassing your networks proxy settings will open up all sorts of options you where once blocked from accessing
how would I go about that? I didn't know I was behind proxy settings? And do I need them to access medianet?
in your connection settings go to manage existing connection, select proxy settings and untick the box that says this network uses a proxy server to connect to the internet and leave the box ticked that says this network connects tothe internet.
Ive disables my proxy settings for t-mobile Uk internet settings and now it connects alot faster and pages seem to be loading faster also
doesn't work... Darn this sux... I test it with www.msn.com and it still makes it pull up msn.mobile... how annyoing...
bump anyone have anything on this?
I would really appreciate help with this because I have to access a program that I can't otherwise.
If you're looking to hit an FTP site, then I'd grab an FTP client for WM and stop futzing with IE in the first place. Or am I misunderstanding what you're doing?
not it is not an ftp it is an http://112.2232.224:2324 type of site... that is all.
Don't know your carrier but here's a cab that disables the "hidden" proxy in AT&T and one that restores it. Worth a try?
RemE said:
Don't know your carrier but here's a cab that disables the "hidden" proxy in AT&T and one that restores it. Worth a try?
Click to expand...
Click to collapse
i have att... thanks trying now...
RemE said:
Don't know your carrier but here's a cab that disables the "hidden" proxy in AT&T and one that restores it. Worth a try?
Click to expand...
Click to collapse
YEAAAAAAAAAAA I don't know what happened... but since I installed your thing it works perfect. damn I was getting peaved... when I go to msn.com thought it still brings up msn.mobile though. Well at least I can go to anywebsite I want now.
Do I ever need to put the proxies back? I guess I should just put this on my card just in case.
Again, Thanks... What else am I able to do now?
In the Tilt, Internet Explorer's user agent string is locked to mobile internet, meaning that websites will see your device as a mobile device. If the site has a mobile site, it will automatically re-direct you to that. In WM5 devices, you could use software to change IE's user agent string to make it look like a desktop, but on the Tilt, you can't.
You'll need to get Opera Mobile if you want the internet to see your phone as a desktop.
I think for what your trying to do you need to use the MY ISP settings instead of medianet settings. But I don't know what they are anymore. I think you will also need the right data plan to use them.
does PIEPlus User Agent setting work with Tilt?
stpete111 said:
In the Tilt, Internet Explorer's user agent string is locked to mobile internet, meaning that websites will see your device as a mobile device. If the site has a mobile site, it will automatically re-direct you to that. In WM5 devices, you could use software to change IE's user agent string to make it look like a desktop, but on the Tilt, you can't. . .
Click to expand...
Click to collapse
Is this true even if using PIEPlus? PIEPlus Tools>Options Plus>User Agent allows setting User Agent to IE 5.5 or IE 6.0 (which should be seen by websites as a regular computer) in addition to the default PIE setting (which is seen as mobile)
cushcalc said:
Is this true even if using PIEPlus? PIEPlus Tools>Options Plus>User Agent allows setting User Agent to IE 5.5 or IE 6.0 (which should be seen by websites as a regular computer) in addition to the default PIE setting (which is seen as mobile)
Click to expand...
Click to collapse
what is pie plus. First off, I tried using opera mobile desktop setting and when I went to www.msn.com it still comes up as mobile. Do I have to configure something further?
Lastly, I just told you all that the program for turning off the hidden proxies worked. So for what I was trying to do those programs the other person posted worked nicely. However, it still sucks that I can't bypass the mobile crap... There is a program called deepfish from microsoft that addresses the issue exactly, however the jerks won't let the beta out any further. I am gonna aaddress that issue in another post.
I believe the problem is something in the WM6 or the Tilt itself because Opera doesn't work either.
Boy I'm glad you guys worked on this. I upgraded to Tilt yesterday and was cracking my head against the wall trying to figure out why the HTTP addresses wouldn't resolve with the same settings I've been using in my 8525. @#$%#@ Hidden Proxy! lol
Cheers and Happy New Year!
christian15213 said:
what is pie plus. First off, I tried using opera mobile desktop setting and when I went to www.msn.com it still comes up as mobile. Do I have to configure something further?
Lastly, I just told you all that the program for turning off the hidden proxies worked. So for what I was trying to do those programs the other person posted worked nicely. However, it still sucks that I can't bypass the mobile crap... There is a program called deepfish from microsoft that addresses the issue exactly, however the jerks won't let the beta out any further. I am gonna aaddress that issue in another post.
I believe the problem is something in the WM6 or the Tilt itself because Opera doesn't work either.
Click to expand...
Click to collapse
In Opera Mobile go to Menu>Tools>Settings then change Identify as from Handheld device to Desktop computer.
hi all,
i was wondering...
i am looking for a proper Webserver and SSH server (daemon) for my Kaiser.
first.
i want to connect to my phone via SSH (like putty). Does any body know a good piece of software (or cab file) ??
second.
my friends wants connection to my phone webpage. Does any body know a good piece of software (or cab file) ??
many thanks in advance for all the replies !!
How about PocketPutty, http://www.pocketputty.net/. Very much like Putty.
Did you search, man? See my sig.
Not Looking For Client
thanks...but...
i am NOT looking for the client app. but for the server (or daemon) application
to make it clear...i want to run the server part on my HTC kaiser
thanks in advance
m
MWS
megasounds said:
hi all,
i was wondering...
i am looking for a proper Webserver and SSH server (daemon) for my Kaiser.
first.
i want to connect to my phone via SSH (like putty). Does any body know a good piece of software (or cab file) ??
second.
my friends wants connection to my phone webpage. Does any body know a good piece of software (or cab file) ??
many thanks in advance for all the replies !!
Click to expand...
Click to collapse
you could try this:
http://www.sphinx-soft.com/MWS/index.html
thanks...web server running..
thanks...web server running..
now i still looking for the SSH server for the Kaiser
anybody has an idea ??
m
If you like PHP..
There's also another PPC webserver called PocketHPH which will let you run PHP scripts on the phone: http://mobileleap.net/hph
Pretty neet, free for personal use. I've messed with it before, but haven't reinstalled it since reflashing.. Looking at the site, they've apparently updated it with fopen() support, which kicks ass. Now I can write webapps for my phone which interact with my website (also PHP)
w00t!
--Weasel
Be nice if this was useful with the cheap data plans from ex-Cingular, but alas, natted.. I kept thinking "It'd be nice to be able to pop a quick connection to my phone and look at some status" but just won't work.
Tried Hamachi?
There's a PPC Hamachi client which is free.. Then you get VPN capabilities, no more NAT, poof.. Access to your mobile from a computer! The only downside is that Hamachi has to be installed on the computer you're accessing from..
HTH,
--Weasel
EDIT: http://www.hamachi.cc is the address.
EDIT 2: Hard to find from the main page, it's actually here: https://secure.logmein.com/labs.asp (near the bottom)
EDIT 3: For those lazy types: https://secure.logmein.com/labs/hamachi-0.0.3.1.cab
I found this: OpenSSH ported to Windows CE!
http://www.codeplex.com/wiki/view.aspx?projectname=CESSH
It's alpha, at v0.0.1..
Download link is a weird AJAXy popupish thing, so I can't grab the URL without some legwork, and I'm feelin' kinda mellow (read: lazy) right now.. but no registration required, just click the "Download Now" button on the right..
About to d/l and try it out.. Hope it works!
HTH,
--Weasel
weasel5i2 said:
There's a PPC Hamachi client which is free.. Then you get VPN capabilities, no more NAT, poof.. Access to your mobile from a computer! The only downside is that Hamachi has to be installed on the computer you're accessing from..
HTH,
--Weasel
EDIT: http://www.hamachi.cc is the address.
EDIT 2: Hard to find from the main page, it's actually here: https://secure.logmein.com/labs.asp (near the bottom)
EDIT 3: For those lazy types: https://secure.logmein.com/labs/hamachi-0.0.3.1.cab
Click to expand...
Click to collapse
Hmm, VPN. Yeah, that could work. I wouldn't use whatever solution the above is, most likely, but a general VPN could do the trick as long as it reconnects on its own and such. Thanks for the suggestion!
weasel5i2 said:
I found this: OpenSSH ported to Windows CE!
http://www.codeplex.com/wiki/view.aspx?projectname=CESSH
It's alpha, at v0.0.1..
Download link is a weird AJAXy popupish thing, so I can't grab the URL without some legwork, and I'm feelin' kinda mellow (read: lazy) right now.. but no registration required, just click the "Download Now" button on the right..
About to d/l and try it out.. Hope it works!
HTH,
--Weasel
Click to expand...
Click to collapse
Thy this as a direct link: http://www.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=CESSH&DownloadId=4858
ok,
this is gonna be a little description and a question at once.
i've tried to get a cisco vpn client to run on the diamond. at first, i tried athenaVPN, which works really good, but it installs automatically a firewall-app next to the vpn client. this FW is started automatically at windows startup, no chance to get this off. after that, i tried to use bluefire vpn. it took a lot of time to get this running, but now it works, but it slows down the whole system. i don't appriciate this. so the question is...is there another simple cisco-vpn client out i've not seen before, because the other two applications have too many disadvantages. thanks a lot,
earp
I also would be interested in any cisco vpn solution, that works...
Did you guys ever find anything?
OpenVPN
If it interests anyone, I've used OpenVPN for a while, and it works great, at least on my KS20.
It's open source and it's not so difficult to install and configure, but admittedly it doesn't work with a Cisco VPN. As SFR in France blocks all ports but 80 and 8080, it allowed me to use MSN and other communication applications (too much lag for Skype) and access my shared files...
You can get it here
I've been looking into this too - we use Cisco AnyConnect VPN at work and it'd be nice to see whether it's available on the HTC.
I'd also be so happy if one of us can find a problemless vpn client. I hate logging in as a guest user everytime to my network.
I have tried Bluefire VPN with success. I had only .pcf file and here is not VPN client on PDA to use with. If you use group password, you have to ask your admin about cleartext password and then you can use VPN for example to your Cisco 3000 VPN concentrator.
You may want to take a look here: http://forum.xda-developers.com/showthread.php?t=356489
I have a local file server accessble via wifi (or should be) its "\\server"
WHEN Wifi is on and connected and I put that in File Manager "\\server", it says cant connect, but if I put that in PIE it goes there.
Anyone have any ideas how I can get this to work? It used to work in WM6.0.
You should try Resco File Explorer; a LOT better for that purpose. I have been in a similar situation in mapping the drive and it works flawlessly. There's a 15 day trial to check it out; think you'll be pretty impressed.
Try "\\servername\sharename"...
try to access a particular share instead of getting the shares list by using the "\\servername" convention...
try something like "\\servername\sharename" and see what happens...
alternately, i highly recommend schap's rip of the HTC Network Plugin v1.0 Build 30468...it will make the steps of accessing commonly used local shares a whole lot easier by allowing you to map the drive into the "\Network" folder on your device...see 4th post in this thread:
http://forum.xda-developers.com/showthread.php?t=359458
enjoy!!!
I dont want to buy Resco, but it does work nicely.
\\servername\sharename fails as well and \\servername\sharename\ etc..
I will try the plugin and see. (Update) I instlled it and cant find it anywhere.. How do I "use" it?
Thanks!
ASCIIker said:
try to access a particular share instead of getting the shares list by using the "\\servername" convention...
try something like "\\servername\sharename" and see what happens...
alternately, i highly recommend schap's rip of the HTC Network Plugin v1.0 Build 30468...it will make the steps of accessing commonly used local shares a whole lot easier by allowing you to map the drive into the "\Network" folder on your device...see 4th post in this thread:
http://forum.xda-developers.com/showthread.php?t=359458
enjoy!!!
Click to expand...
Click to collapse
Total Commander is free and does this well.
It also has a registry editor, text editor.
Did I mention it is free.
Another thing to check...
maybe your wifi connection is set up in "Internet" mode as opposed to "Work" mode...might explain why it works via PIE...
i think i remember experiencing total failures accessing local shares if my wifi connection was set up as "Internet"
on Settings->Connections->Wifi, edit the particular wifi connection you use and on the first page in the second combo box labeled "Connects to:", make sure the value is "Work"
give that a shot and let us know!!!
That was it!! Thanks! Odd setting really.
ASCIIker said:
maybe your wifi connection is set up in "Internet" mode as opposed to "Work" mode...might explain why it works via PIE...
i think i remember experiencing total failures accessing local shares if my wifi connection was set up as "Internet"
on Settings->Connections->Wifi, edit the particular wifi connection you use and on the first page in the second combo box labeled "Connects to:", make sure the value is "Work"
give that a shot and let us know!!!
Click to expand...
Click to collapse
woohoo!!! i'm a noob WinMo user as of May 2008 with my Tytn2...coming from 5 years of using something from motorolla that was equivalent to a nokia 3310...totally basic PHONE in the truest sense...no color screen, no camera, big and clunky, pathetic interface...useful ONLY for voice and sms
but my point is that coming from decades of using Windows, somehow WinMo makes sense in a microsoft kind of way with all its occassionally cryptic features and inexplicable odd behaviors...i'm a geek and i'm lovin' it
before this thread is closed, the network plugin is HIGHLY RECOMMENDED...i used to use resco for mapping drives but found its behavior to be erratic when my wifi signal was weak...sometimes taking ages to try to open a share just before the wifi icon would show that the connection had dropped
network plugin, IMHO, seems to work a bit better...YMMV
dealwagon said:
...(Update) I instlled it and cant find it anywhere.. How do I "use" it?
Thanks!
Click to expand...
Click to collapse
check in Settings->Connections->Network Plugin
while resco's network drive mapping configuration is accessible only from within resco (even though the shares resco mounts are accessible system-wide in any application whether resco is running or not), the network plugin gives a better "integrated" feeling with WinMo even though it is not much different from resco's capabilities
Got the HTC network plugin working. Now I have 2 ways to access the share.
Hi folks,
Our school features HD-beamers in every classroom, so chromecasts would be ideal for the teachers to present their stuff on a large screen.
That said our school is connected to the internet via a proxy-server, which offers content-protection.
I cannot touch the proxy-servers configuration so i would really need a way to make chromecast work through a proxy.
I managed to use my android-phone with the proxy via sandroproxy.
I am not a programmer and do not know about the problems in detail but from a general perspective it shouldn't be too difficult for the chromecast to direct all internet-connections through a certain server and port is it?
Would be glad if someone came up with a solution.
Jörg Bilert
Talmar Grosskotz said:
Our school features HD-beamers in every classroom, so chromecasts would be ideal for the teachers to present their stuff on a large screen.
That said our school is connected to the internet via a proxy-server, which offers content-protection.
I cannot touch the proxy-servers configuration so i would really need a way to make chromecast work through a proxy.
I managed to use my android-phone with the proxy via sandroproxy.
I am not a programmer and do not know about the problems in detail but from a general perspective it shouldn't be too difficult for the chromecast to direct all internet-connections through a certain server and port is it?
Click to expand...
Click to collapse
Chromecast is difficult because there is very little you can configure, and unlike your phone you can't sideload - or load apps in general.
Instead of doing it on a per-device basis, it might be easier to see if the WiFi access point or router can be made to go through the proxy, similar to how some routers can be made to connect to a VPN, etc.
I would think that all the setup needed would already be done for you on the AP side of things.
(if done correctly) You shouldn't need to configure anything it should all be setup to use the proxy on any connection.
Most proxies are set to only deny certain sites not all except...
Do you have to enter proxy information in your browser manually to get onto the net? If so or if IT comes in to setup your computer before you can browse with it the first time, then it's probably not set up automatically.
If you explain to your IT Dept what it is your trying to do I am willing to bet they can make an exception for the MAC Addy of the CCast.