Hi, i'm trying to use voice commander 2.0 or 2.5 but i've the same problem:
when i have to talk to send a command to the program it does not hear me, i'm using a bluetooth headset and the origina rom italian.
the headset works fine.
ekosbravo said:
Hi, i'm trying to use voice commander 2.0 or 2.5 but i've the same problem:
when i have to talk to send a command to the program it does not hear me, i'm using a bluetooth headset and the origina rom italian.
the headset works fine.
Click to expand...
Click to collapse
Same problem with Spanish ROM ... ¿Any idea about what happends?
Same problem... And there is the same problem also on Touch Pro model.
I have noticed that it will work for be if I use the button but I have to only hold it about 2 seconds or it just beeps.
With button and long time hold, CVC works, but from phone and not from headset.
The problem may be in bt audio gateway driver or in an wrong AT bluetooth command send to the headset. I've try CVC 2.5 on HTC Tytn II, and all works fine with the same headset.
Same problem with French ROm et French CVC
Related
Any of you guys had managed to get the voice commands coming out from your BT headsets using MS VC 1.6?
i.e. you press BT headset to activate VC 1.6, instructions from VC 1.6 comes through BT headset, you give instructions through Mic of BT headset.
I tried searching in the forum and only managed to find one thread here but that seems to be only applicable to Hermes.
Any help on this would be appreciated.
zard said:
Any of you guys had managed to get the voice commands coming out from your BT headsets using MS VC 1.6?
i.e. you press BT headset to activate VC 1.6, instructions from VC 1.6 comes through BT headset, you give instructions through Mic of BT headset.
I tried searching in the forum and only managed to find one thread here but that seems to be only applicable to Hermes.
Any help on this would be appreciated.
Click to expand...
Click to collapse
i am using 1.6
When i prees my Headset's button, Voice recognition turns on but my voice command is heard by the phone and not through the headset. Maybe this is how it was supposed to work? Seems that actually working through the headset would be to much of a convenience.
i actually tried to make it work, but until now I havent managed to dial via BT handsfree.
i am now using Cyberon, which does the same thing i.e. u press BT handsfree button, it activates the voice command, and you have to talk to the Phone.
I also make a VoiceDial softkey button...
I guess I have to be happy with this, since nothing else works.
MVC 1.6
MVC Ver 1.6 is working well with my PDA2K upgraded to Helmi's 2.6. I have I-Tech Clip S headset and I can hear MVC in my headset. Also streams music to my headset.
wizard327 said:
MVC Ver 1.6 is working well with my PDA2K upgraded to Helmi's 2.6. I have I-Tech Clip S headset and I can hear MVC in my headset. Also streams music to my headset.
Click to expand...
Click to collapse
What are the profiles you have for the I-Tech Clip S headset?
Is I-Tech Clip S headset with BT 2.0?
When you receive an incoming call, does the audio comes in from the headset or the ppc?
When you speak, does the audio goes into ppc mic or headset mic?
Thanks.
zard said:
What are the profiles you have for the I-Tech Clip S headset?
Is I-Tech Clip S headset with BT 2.0?
When you receive an incoming call, does the audio comes in from the headset or the ppc?
When you speak, does the audio goes into ppc mic or headset mic?
Thanks.
Click to expand...
Click to collapse
My PDA2K recognizes my I-tech Clip S as wireless stereo and Handsfree. When I receive an incoming call, MVC announces the call through my headset but sometimes, announcement is through the phone ( mostly through the headset). When I speak, audio goes to the headset mic. I'm not sure if my bluetooth stereo headset is BT2. Hope this helps
wizard327 said:
My PDA2K recognizes my I-tech Clip S as wireless stereo and Handsfree. When I receive an incoming call, MVC announces the call through my headset but sometimes, announcement is through the phone ( mostly through the headset). When I speak, audio goes to the headset mic. I'm not sure if my bluetooth stereo headset is BT2. Hope this helps
Click to expand...
Click to collapse
I just bought the I-tech Clip Radio. It too was recognised by my IIs with Xplode's AKU 3.5 rom as wireless stereo and Handsfree. On the other hand, MVC doesn't annoucee incoming call to my headset at all. My voice too does not go through the headset mic. Very sad!
Can't see your signature but I think you are using O2 Atom. Does it come with Microsoft bluetooth stack or Broadcomm bluetooth stack?
Can you check for me if this dll file is present in your Atom. Do you have Task Manager by DotFred ( http://buzzdev.net/component/option...option=com_content&task=view&id=86&Itemid=1)? If yes, please run it and go to Devices, and check if the following is Loaded or Unloaded?
$device\WAV8(WAV8 => Reg Key is Drivers\BuiltIn\BtA2dpSnd
Mine is not loaded and even if I try to load it, it won't load. When I try to look for the file in \Windows, there wasn't such a file. If you have this file, can you upload for me? BTW, what is the Rom that you are using, i.e. which AKU? You can find out this information from settings, system, about. Mine is AKU 3.5, and it reads as OS5.1.195 (Build 15698.3.5.0).
Next, can you check the build for MS VC? Mine reads as v1.60.4622
Thanks.
Hey,
I have a Jabra Bluetooth headset which works with the X7500, except for the voice dialing: the call handling button on the headset doesn't trigger the voice dialing. Other headsets do.
I can remember that there was some kind of trick to have this working with certain Jabra headsets. Was it in the register or something?
Thanks for the help.
JayRayMee.NL said:
Hey,
I have a Jabra Bluetooth headset which works with the X7500, except for the voice dialing: the call handling button on the headset doesn't trigger the voice dialing. Other headsets do.
I can remember that there was some kind of trick to have this working with certain Jabra headsets. Was it in the register or something?
Thanks for the help.
Click to expand...
Click to collapse
I have Microsoft Voice Command 1.6 and it works well. Don't use the one included on the phone so can't comment on that. I no longer use my Jabra but when i did everything worked as expected.
MI Jabra and Voicedialer!
HI... I have a Jabra Bt800 ...and the same problem like you.. i could trigger de voicedialer in hibernation mode ( When screen is off )
Is the only way..that i find...and really logic but...you dont need voicedial...maybe for a nice demostration of capabylities for...in the diary use...you don,t...so...no all are the same think !
Good Luck !
FranCoke.
francoke said:
HI... I have a Jabra Bt800 ...and the same problem like you.. i could trigger de voicedialer in hibernation mode ( When screen is off )
Is the only way..that i find...and really logic but...you dont need voicedial...maybe for a nice demostration of capabylities for...in the diary use...you don,t...so...no all are the same think !
Good Luck !
FranCoke.
Click to expand...
Click to collapse
I have a Jabra, 2 Motorola's, 2 Plantronics, and a Jawbone headset and all work perfectly except for the incoming call announcement through the headset, which I believe is being worked on by m/$ as we speak !
Check your settings for the phone in ms voice command and make sure that the top 2 boxes are check marked.
Hope this helped.......Later
did you ever find any additional information?
Hi,
I'm unable to perform commands through my bluetooth headset. Paring is successful, i can have conversations with the bluetooth activated. But i can't redial the last number, nor do a voice speed dial. I have the Kaiser SFR branded ( v1615 )
I have the latest Cyberon installed. Anyway i don't think the redialing has anything to do vith cyberon or voice command.
I have a bluetrek G3 headset, and i also tried a nokia hs11 headset i borrowed from a colleague. i still the same problem, so the problem doesn't come from the headset.
Help anyone, please !
Thanks
Maybe anybody knows how to resolve it? The problem is that mic of bluetooth headset is not working with Cyberon Voice Commander Russian on Diamond!!! I have tryed many ROMS and bluetooth headsets already and without success. Voice Commander is starting by pressing of button of BT headset, i can hear the voice in BT speakerphone but when i'm starting to speak in BT mic nothing happen. When i'm using Voice Commander without BT headset it is working without any problems at all. Tryed it on my old Universal, the same problem. Tryed the same on Eten M500 and M800 of my friends, all is good working. As i see it is because the difference between Bluetooth stacks of HTC and ETEN? Who has the same problems?
I have this problem too. No idea for resolve?
Diamond + BT Siemens HHB-700
HI, Same problem!!!
has anybody found a solution?
same problem...
no solution yet?
Hello,
Same problem with Headset Jabra BT250.
Please Help !!
hi
maybe this help
i found this
http://msdn.microsoft.com/en-us/library/ms880945.aspx
just edit the register with some extra DWORDS
and it works (htc diamond with a pioneer caraudio with builtin bluetooth)
good luck
I have Cyberon Voice Commander 1.5.1 installed on my HTC Touch Diamond.
When I press the button on my BT headset the CVC opens and a prompt "say a command" is played through my BT headset; however, it does not seem to take input from my BT headset when I say a command. I tried the program with a wired headset and it works flawlessly. Please advise if there are any settings I need to configure to make it work with BT.
Thanks!
Any help with bluetooth headset stack/configuration would be greatly appreciated.