I have one problem with my Diamond, I'm living in sweden and our oparator is tele2 which let the phone ringing just 4 times at the incomming call then going to answer machine, the problem is the HTC touch Diamond start to ring at the 3rd one, means just have two incomming ring , I have lots of missed call per a day, How can I solve this problem plz.
In the option menu, when your are one the page with number to call, there is a few of possibility:
vibrate in first, then ring (your case)
vibrate AND ring
...
Select vibrate and ring, your diamond will ring immediatelly at the first ring...
Excuse my english, i'm french...
[email protected] said:
In the option menu, when your are one the page with number to call, there is a few of possibility:
vibrate in first, then ring (your case)
vibrate AND ring
...
Select vibrate and ring, your diamond will ring immediatelly at the first ring...
Excuse my english, i'm french...
Click to expand...
Click to collapse
Not on my XDA Ignito; Even if vibrate and ring is set the lights flash for at least 2 incoming rings before the phone rings and vibrates
Ringing problem!
I have one problem with my Diamond, I'm living in sweden and our oparator is tele2 which let the phone ringing just 4 times at the incomming call then going to answer machine
Click to expand...
Click to collapse
If that is an operator setting maybe it's possible to change it in your operators' voice mailbox settings?
Thank you for your reply, I ve gott another mobile phone SE and it getting the incoming call with the first ringing, but with the diamond it is ringing after 2 incoming signal? I think there is a problem with the setting or some thing else but cann't get it back...any one can help its appreciated.
Its not from the operator and neither from signal setting.
Many have had same problem, i think there is a thread about this some where. I solved it by increasing the amount of time before my voicemail picked up (need to talk with your phone company about that) and using a .wav ringtone format. Sorry no "easy" fix
Thanks Hippo-DK , how can I find that thread? I'm in need to get this broblem solved, how can I do mailbox? or what?
He's right in the fact that you have to contact your cellular provider to increase the rings before going to voicemail, but you can't keep it from waiting 2 rings before actually ringing. It's a problem that no one has found a direct solution for.
Related
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
What headset are you using?
Does it have a delay without a headset?
On mine I get a delay with a headset that supports the handsfree profile (Jabra BT800) but not on a normal one, or without a headset.
My XDA2 did this also, but the XDA2 with WM2005 worked perfectly.
could be the time needed to find/load the ringtone ?
do you have caller id or ringtonex with different ringtones and/or pictures?
maybe loaded from memory card ?
audiblefrequency said:
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
Click to expand...
Click to collapse
I have the same problem with mine... I only get three rings to answer the phone - which can be pretty annoying!
I've not noticed whether having any form of headset makes a difference, though.
Ringing Delay
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Re: Ringing Delay
LYNDONSLANN said:
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Click to expand...
Click to collapse
I have the same problems and the bluetooth flattens the battery in 4 hours. I used to have the XDA II with Sins cooked 2K3se and it was perfect, unfortunately I gave it to my son who won't give it back.
Hey, I have same problem, I got the latest ROM, and since then it got even worse. Does anybody knows how to fix the problem, modify ROM, or something, PLEase help.
Thank you.
the only solution i have to date is to change the answerphone delay, you can find your networks status codes here:
http://www.expansys.it/forumthread.asp?code=K700&thread=72
i changed mine to 30 secs to give me a better chance!
cheers
Hi,
Ok, i tried ringing my kaiser from another phone and realise that the kaiser only actually starts ringing/vibrating and notifying of an incoming call ONLY after 2 rings from the phone making the call.
This has an overall effect on me knowing if i am going to get calls, missed calls and calls diverting to voicemail after 6 rings...
Can someone confirm they get the same problem...
F
Frontline said:
Hi,
Ok, i tried ringing my kaiser from another phone and realise that the kaiser only actually starts ringing/vibrating and notifying of an incoming call ONLY after 2 rings from the phone making the call.
This has an overall effect on me knowing if i am going to get calls, missed calls and calls diverting to voicemail after 6 rings...
Can someone confirm they get the same problem...
F
Click to expand...
Click to collapse
Can't duplicate the problem here! It rings on the very first ring.
Hi
If the phone is in standby (it's normal state after a couple of minutes) then it will take about a ring or 2 for it turn on and sound the notification. This seems normal for all pocket PC phones. SmartPhone's behave more like normal mobiles and ring quicker as they are always on and don't have a standby mode like pocket PCs.
Having a ring tone on the storage card can also slow things down so make sure your ring tones are in the devices memory.
Regards
Phil
Same problem here.
If my phone in sleep/ON mode the incoming call will forward to voicemail.
Outbound call always work.
If I power cycle the phone, incoming call will work.
I think something not sync between the phone and the ATT network.
So ATT think my phone is offline.
Hey all...I probalby should know this as I have uses a PPC device for 2 years...but I don't remember having this issue on my last phone.
When I am on a call and get another coming in it consistently beeps/rings for the call waiting.
I have set my phone up to wait 30 seconds before going to voicemail (as I am not always around the phone). Because of this if I am in the middle of a conversation and get another call, I can't hear the other party (and am distracted myself) because my phone keeps ringing the other line for 30 seconds until the call is rejected.
When using MS Voice Command, I get the same thing with incoming announcements. If I am on the phone with Caller A and then Caller B calls, MSVC keeps saying "Incoming Call from Caller B."
I don't want to turn off Call Waiting, but I would like to change the notification so it is only a beep or something simple every 5-10 seconds and not a continuous ringing or talking.
Is the caller ID ring/tone able to be managed differently from the ring tone/announcement? What is the best way to manage this?
thanks
bumping to see if anyone has advice?
I have Same Problem With BlackStone and this annoying me so much
Any advice ?
PhoneAlarm has a setting to Vibrate for alerts while in a call.
HI guys! I have a little problem on my wings: when I'm already on a call and someone calls me, I don't recevive any acoustic alert; I mean, the screen shows me that there is another incoming call but if I have the phone at my ear I can't see the screen. Is there a way to make the phone ring or vibrate or anything else that tells me that there is another call??
THX
Settings=>Phone=>Call Waiting. Make sure "Provide call waiting notifications" is checked and then go into Settings=>Accessibility and change your In-call alert volume to increase the tone.
Thanks. I found out that I had changed too many keys in the registry
Hi,
Good day, I have HTC Kaiser with official Windows 6.1.
My problems are :
1 ) Sometimes when my phone ring and I reject the call it doesn't reject it. it keeps ringing until the network disconnect this call. I solve this problem by soft-reset.
2 ) I need to change the default input method from Arabic-Keyboard to English-Keyboard. I did this some time ago but it return back to Arabic.
3 ) I sync my mobile at home and work. Every time I have to uncheck Contacts form sync menu and check it again to make sync work.
4 ) It's not a problem but I bought a bluetooth hands-free device and I would like to know what's the best way to use it, is it by turn device bluetooth on all the time. I need some tips a bout this.
Thanks a lot.
Hi,
Also, I remembered something I want my mobile to vibrate then ring but I think it's not doing this with all contacts sometime it's ring sometime it "vibrate then ring"
How can I solve this ?
Desigen said:
I have HTC Kaiser with official Windows 6.1.
My problems are :
1 ) Sometimes when my phone ring and I reject the call it doesn't reject it. it keeps ringing until the network disconnect this call. I solve this problem by soft-reset.
Click to expand...
Click to collapse
How are you attempting to reject the call? If you press the red hangup button when the call comes in but the phone keeps ringing and the call doesn't go through to your voicemail box, it may be a faulty button on the phone as that button should silence any incomming call.
2 ) I need to change the default input method from Arabic-Keyboard to English-Keyboard. I did this some time ago but it return back to Arabic.
Click to expand...
Click to collapse
If you have the HTC official ROM in World Wide English (WWE) that includes an English keyboard so if your settings aren't sticking, a hard reset may be the quickest way to solve the problem.
3 ) I sync my mobile at home and work. Every time I have to uncheck Contacts form sync menu and check it again to make sync work.
Click to expand...
Click to collapse
See if the above hard reset has any effect on this too. As I only use Activesync for file transfer, I cant help with that one.
4 ) It's not a problem but I bought a bluetooth hands-free device and I would like to know what's the best way to use it, is it by turn device bluetooth on all the time. I need some tips a bout this.
Click to expand...
Click to collapse
If you're expecting to receive calls through it all the time then you need to have the TyTN IIs bluetooth enabled all the time, how else is it going to communicate with the phone otherwise? To anticipate your next question, yes that uses lots of battery power so you may need a spare battery or two when you're out and about handsfree (or you could just use the wired headset that came with the phone for no additional battery drain).
As for the ring vs vibrate and ring, if you've setup a customised ring for certain individuals, that would explain why it behaves differently when a call comes in from one person compared to another. Are these sim contacts or outlook contacts?
Flying Kiwi said:
How are you attempting to reject the call? If you press the red hangup button when the call comes in but the phone keeps ringing and the call doesn't go through to your voicemail box, it may be a faulty button on the phone as that button should silence any incomming call.
Click to expand...
Click to collapse
Hi, when I want to reject the call I mute the phone by using the wheel button then press the red button "reject button" or touch the screen on "reject" word. None of the above work. They all failed. The phone not ringing but the call doesn't end. This happen from time to time. Not always.
Flying Kiwi said:
If you have the HTC official ROM in World Wide English (WWE) that includes an English keyboard so if your settings aren't sticking, a hard reset may be the quickest way to solve the problem.
Click to expand...
Click to collapse
Yes, my ROM is WWE and I installed FJE application and I want the default input method to be Keyboard.
Flying Kiwi said:
See if the above hard reset has any effect on this too. As I only use Activesync for file transfer, I cant help with that one.
Click to expand...
Click to collapse
No problem, I attach the two error I get
Flying Kiwi said:
As for the ring vs vibrate and ring, if you've setup a customised ring for certain individuals, that would explain why it behaves differently when a call comes in from one person compared to another. Are these sim contacts or outlook contacts?
Click to expand...
Click to collapse
I don't have any contact with special ringtone, all my contacts are Outlook.
Regards,