Database Develop

Qtek 9090 stuck in bootloader

Help my Qtek 9090 stuck in the bootloader.
After updating to wm2005 fix4 i pressed Power + Softreset, and when the colored stripes shows on the screen, i press the two buttons Record+Camera. Then i see the three options. I changed them, second and the third to "yes" and then pressed on the mailbutton. My screen becomes white and thats it.
It doesn't boot on.
What did i do wrong and is my ppc def. dead?
GuidO

Had the same problem, with original O2 GER Rom.
I did downgrade to the newest Vodafone ROM, then upgrade again to WM5 - and I got into the menu

still doesn't work.
I get country error on all the original 2003se BA's and the error 113: extended rom update error
But when i load the wm2005 software it goes great until you have too push the mail button it stay's white.
It doesn't boot further.
If i resset my device i see the 4 lines [ blue-green-red-white] whit in the white line
R 1.13.00
G 1337.42
D 5.03.02 WWE
Is it possible that the problem is in de dutch language pack from buzzdev.net ? I did that instal it al the latest moment on my qtek 9090.
I still miss my qtek
Anybody???
GuidO
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Try to upgrade to the Vodafone ROM from the bootloader Mode (the white screen saying serial), with disabled Activesync (screen change to USB).

Have you followed the wiki Guide to the letter..?
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
In addition to this, a simple search (located above) would have brought up replies from various persons stating that sometimes, you just need to be patient.. get to the white screen, go chill out for a while and then come back.. If I remember rightly, it's been reported that it can take ages..
Give it time and all will become clear..
Cheers!

Vodafone Rom gives me a country error and all the other will say the same.
Only the wm2005 patch 3 will installed on my qtek 9090 but when i do that
I still wait for at least 11 hours with a white screen when i pressed
the second and the third yes and then push the mail button.... :twisted:
Is there another solution to "unlock" my device?
GuidO

Windows mobile 6.1 for Wings by Hikey (08.6.4)

The rom is based on official singapore v1.33 rom and microsoft's wm 6.1 emulator image.
Language: English / Simplified Chinese
CE OS 5.2.1622 (Build 19202.1.0.0)
Download at http://www.fs2you.com/files/ae9c0f8a-3269-11dd-81ea-0014221f3995/
How to flash:
just use jocky's hardSPL to do it.
http://forum.xda-developers.com/showthread.php?t=356295
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How about memory consumption?

Nice one...
What is the difference from Alcaline's build? What programs/features are added? Both are the same radio and OS versions.

link not working

h3ax said:
link not working
Click to expand...
Click to collapse
Just click in, and download with code: 922be23f

The builds are the same as the Alkaline version. from the images I cant find any differences. Can you please update with what has changed since the alkaline build? or is it just the same but by someone else?

Some items are still in chinese
The build installed great and works BUT, the ENTIRE bluetooth area is in Chinese still. Also the date format is in chinese as well as the VoiceMail speed dial entry. I'm still playing with this but if anybody knows how to get bluetooth back in english let me know.

windows live is in chinese as well. how do i get everything back in english?

seems like there is missing some language files in this rom..

I'm having trouble downloading you'r ROM fron FS2You. Always getting "too many downloads". Is it possible for you to upload to XDA FTP or maybe a mirror.
TIA

I am actually looking for a stable build of this type of ROM for my Tmo Wing. Any Ideas? I searched for Alkaline and it only turned up this page. :-(
Thanks in advance.

millowster07 said:
I am actually looking for a stable build of this type of ROM for my Tmo Wing. Any Ideas? I searched for Alkaline and it only turned up this page. :-(
Thanks in advance.
Click to expand...
Click to collapse
I use this:
http://forum.xda-developers.com/showthread.php?t=383617

hikey dont have wings
i help him test the rom
its so good

Hikey said:
Download at http://www.fs2you.com/files/ae9c0f8a-3269-11dd-81ea-0014221f3995/
Click to expand...
Click to collapse
link die

please reupload, pretty please

When i flash my phone, will this end the garanty on my mobile?
kindly regards Sybren

Foxtuner, yes.

The date on your pic is fxxked up

No sound issue

Problem is that if I play an mp3 or a video there is no sound and I also don't get any sounds from my TomTom when in use
Any ideas folks?
Thanks

Inishmore said:
Problem is that if I play an mp3 or a video there is no sound and I also don't get any sounds from my TomTom when in use
Any ideas folks?
Thanks
Click to expand...
Click to collapse
Flash a compatable radio for your ROM. (http://forum.xda-developers.com/showthread.php?t=349375) / http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Thanks
Dave

checking the device info it says I already have 1.27.15.32 which appears as the latest on the list?
btw I'm in the UK on the 3 network

Inishmore said:
checking the device info it says I already have 1.27.15.32 which appears as the latest on the list?
btw I'm in the UK on the 3 network
Click to expand...
Click to collapse
What version of Windows / ROM are you using?
Ta
Dave

WM6.0
Rom version 2.50.771.0 WWE
Rom date 03/10/08
Radio version 1.27.15.32
Protocol version 22.51.88.13W

anyone? pls?

I've never seen a 2(point)50(point)771 Build before in my life. Now according to Dave's Link above. If you mistyped and its a 25(point)etc etc ROM its actually a WM6.1 ROM and 1.27. Radios do NOT work with WM6.1

Inishmore said:
anyone? pls?
Click to expand...
Click to collapse
does your camera work?
edit: yes Jimmy is correct thanks for looking jimmy we posted at the same time

just checked and it's 2.50.771.0 WWE so my original post on specs is right.
I assume it's a custom rom for 3 (UK)........camera works - can take pictures fine

Go into Start, Settings, About and it will tell you if your using WM6.1 or not. If you are using WM6.1 you will have to flash a new Radio.
Ta
Dave

Using WM6 Professional CE OS 5.2.1620 (Buld 18125.0.4.2)

OK Then Is the Phone And Device Volume Down?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

For some reason when I launch the music player it drops the volume to 0.......I can raise it and there is sound
Apologies for the daft problem thread people and thnx JimmyMcGee

Tytn II photos disbaled?

Hello,
i flashed my mobile Vario3 to HTC Tytn II original without Tmobile brands, after this i installed WM 6.5 and everything works fine, but when i wanna make a picture, hte mobiel works a bit and after this, no picture anywhere...
What is this for a problem? what can i do???
And by the way, in the task where is the symbol for Internetconnectivity (G,E,H,3G) ?? see picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope someone has an answer...

searching would bring up the answer most likely..
Change your radio

It's because you are on GPRS, use Advanced Config\Data Connection Enable Legacy GPRS Notification.

ChumleyEX said:
searching would bring up the answer most likely..
Change your radio
Click to expand...
Click to collapse
My english is not the best so i dont know, what i have to search for... i am sorry
and what ist advanced config? Is this a tool i have to load?
and my other question was why i cant make pictures with the cam? the counter works, but no photo...

Prezioso said:
My english is not the best so i dont know, what i have to search for... i am sorry
and what ist advanced config? Is this a tool i have to load?
and my other question was why i cant make pictures with the cam? the counter works, but no photo...
Click to expand...
Click to collapse
Advanced Config is a program cooked in most ROMs
No pictures i'd go with ChumleyEX that you don't have the correct Radio as in 6.1 it's noted in the Flashing for noobs and many other places

I have got this one here in German language...
So i have to load another Radio?
I found the noobs guide, but i read this and i dont know which radio i have to use now... Which radio i have to load? there are so much original 6.1 radios, but i dont know which is the one for me.
Regards and thx

Now i read something here and tried the loader teijak wrote in there, but no working...
Screen mobile says: KAIS130 MFG, SPL-1.0.OliPof, CPLD-8
And Notemake says mistake 260... :-(

Ok i did over microsd...
I putted radio 1.70.19.09 on it, now i see which speed i have in network, but the camera is still not working, so whats wrong?
Needs Hard spl updates?
Regards

HTC Opal100 stuck in your OS ROM isn't customized for your hardware

phone history:
phone is in working state before, i just want to change language to English.
after doing hardspl using this GUIDE. and changing its language using this GUIDE. phone stuck on boot loader. i tried to bring back to opal stock spl but still the same
see pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

reignsmart said:
phone history:
phone is in working state before, i just want to change language to English.
after doing hardspl using this GUIDE. and changing its language using this GUIDE. phone stuck on boot loader. i tried to bring back to opal stock spl but still the same
see pic
Click to expand...
Click to collapse
hard spl is done and works how you can see... try another ROM.. inthe viva section there are many roms in english... try them and reflesh the phone...
see my signature for the rom... it is in english and works very well

Hard SPL seems ok but cannot flash ROM
zofox said:
hard spl is done and works how you can see... try another ROM.. inthe viva section there are many roms in english... try them and reflesh the phone...
see my signature for the rom... it is in english and works very well
Click to expand...
Click to collapse
This is my first post and I am a nervous rom flasher.
Hi, I have similar problem. I have a spanish language ROM 1.26.412.2ESN and am trying to change to english version. Having scoured the threads till I was dizzy, I appear to have hard spl´d as my screen shows ONBL 1.26.0000; SPL 2.00cmon. I have tried to run install exe with 3 different Roms including the one on this link inside the folder. The phone resets itself each time but still has the spanish language Rom. (It does not take very long before resetting) Continuously connected to SyncCentre in Vista each time till reset. Am I missing something obvious? I would be grateful for any help.