I have had my Diamond for about 5 days now. The other day I noticed it will get stuck in a constant weak vibrate. It seems that a vibe event will cause it to start, like the phone doesn't know to stop vibrating.
I call it weak, because while it is doing this, I can go to volume settings, select Vibrate and the much stronger vibrate even occurs. It seems if I shake the phone or move it around a bit the weak vibrating will stop.
Also shaking the phone sometimes causes this weak vibrating to begin.
Sounds like a mechanical issue ? I have installed some apps like GSen & SensorLock. A couple others like Advanced Config and done some of the registry tweaks.
Any suggestions would be greatly appreciated.
Thanks in advance.
mackerman said:
I have had my Diamond for about 5 days now. The other day I noticed it will get stuck in a constant weak vibrate. It seems that a vibe event will cause it to start, like the phone doesn't know to stop vibrating.
I call it weak, because while it is doing this, I can go to volume settings, select Vibrate and the much stronger vibrate even occurs. It seems if I shake the phone or move it around a bit the weak vibrating will stop.
Also shaking the phone sometimes causes this weak vibrating to begin.
Sounds like a mechanical issue ? I have installed some apps like GSen & SensorLock. A couple others like Advanced Config and done some of the registry tweaks.
Any suggestions would be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Un install sensor lock and test. i had this issue with an old version ofthat application.
I have uninstalled both GSen (Since it wouldn't rotate SMS for me on Sprint Diamond) and Sensor Lock. The device is still doing this strange vibrate.
I noticed even when I hold the power button and turn it off (soft reboot?) it continues the odd vibrate. The vibrate will however stop when I remove the battery.
Just giving an update. The phone has stopped doing this strange vibrate action. Not sure if it was related to the program un-installation or not. As stated above it continued to do the vibrating action after the program was uninstalled, but definitely less frequently.
I had something very similar the other day. I'm using the swift ROM.
Its never happened before, and i've been using this same rom a for a while now.
ya i have the sprint diamond and mine did that the one time when i took it off the charger. it would vibrate pulses and the phone was like frozen. So i plugged it back in the charger and uninstalled sensorlock and its fine now
mackerman said:
I have uninstalled both GSen (Since it wouldn't rotate SMS for me on Sprint Diamond) and Sensor Lock. The device is still doing this strange vibrate.
I noticed even when I hold the power button and turn it off (soft reboot?) it continues the odd vibrate. The vibrate will however stop when I remove the battery.
Click to expand...
Click to collapse
Somewhat off topic but did you find anything that rotates in SMS on the Sprint Diamond?
Don't blame it on Sensor Lock. I don't have that program installed & mine started vibrating non stop the other day. I couldn't get it to stop & finally did a hard reset. It still continued to vibrate all the way to the point where it got to the green Windows Mobile screen. It stopped, after that & it hasn't happened again since (this was on Saturday). I had done some of the reg tweaks for TF3D performance & nothing else.
sensor lock was the only program i had installed so it was the reason for me. as far as i know only way to rotate SMS with sprint diamond is the long press key
I have also done some of the reg key tweaks on my diamond. It did happen again last night, but before that it's been a few days. I had GSen installed, and it wasn't rotating on SMS, I think I read it wouldn't work with the Sprint Diamond.
What is the long key press method?
Related
Hey everyone
Has anyone else noticed that their TyTN II wakes from standby when switching between GPRS and 3G. At least I think this is why mine appears to wake up randomly! It will be sat on my desk in standby mode and then the screen will switch on and the signal strength bars will move.
I've checked to make sure nothing is running in the background and performed a soft reboot.
Any ideas?
Hi
The Kaiser does turn on at least once every hour (some house keeping tasks), and will turn on if the mobile signal is lost. However these on's are in unattended mode which means the device appears off to the owner so the screen will not come on.
If you have some software that likes to do work or updates the today page for example, that software may be detecting the device has turned on and in order to get your attention or just through bad programming, issues a power announcement to say turn on proper, hence the display lights up!
Regards
Phil
Thanks for the info, I'll have a look what I have on there and try and isolate what is causing the power ups.
Cheers for the help.
If you have sprite backup installed with the auto backup on low power option that causes occasional power ups to enable the power check.
I may have solved this issue. After uninstalling enAlarm the phone, no longer appears to be waking. I'm still monitoring it though
i have the same problem when im signed on to AIM. Once i sign off it stops waking up, but if its on it'll wake up every 5 minutes or so, and it is in fact annoying. Havent found out the solution for it yet so i just dont really use it that often
nando223 said:
i have the same problem when im signed on to AIM. Once i sign off it stops waking up, but if its on it'll wake up every 5 minutes or so, and it is in fact annoying. Havent found out the solution for it yet so i just dont really use it that often
Click to expand...
Click to collapse
it's when a friend log's in or out of AIM.. it's a paint, rediculious and ATT refuses to get rid of OZ messanger and use a real one.
here's the kicker. it supposed to use TEXT , but when a friend logs in or out, the message is sent to your phone, and then DATA brings up the list..
STUPID and ignorant of ATT but,. big companies do what they want!
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the Tilt):
http://forum.xda-developers.com/showthread.php?t=335433
Just upgraded to 6.1. I would like to keep the phone asleep when an alarm goes off, I only want a sound or vibrate notification. I'm pretty sure I had it set-up that way before the upgrade.
The problem is that the phone wakes up for a reminder and it will end up dialing a phone number or some other random thing before it goes back to sleep. This happens because I don't hear the alarm, it is still in the holster and movement pushes on the screen. This has happened several times.
Maybe I was using an app before that I need to put back on, I don't remember. This is very annoying and potentialy embarrasing.
Come to think of it, I want the phone to stay asleep no matter what, until I wake it up. I may have had a phone call that I missed and the movement caused the phone to redial. How can I keep the screen disabled until I push the wake-up button?
Thanks-
Diff
Edit:
This is the Tilt w/ ROM from HTC site
Lock your handset
I think locking the handset will solve your problem. I just tried it, I was able to dismiss the calendar reminder but other functions needed me to follow the unlock route. I assume this will work if you also get called.
Install S2U2.
Set it to lock on wakeup.
Thanks Proto, I'll try S2U2. It looks like it may work, and it is pretty cool too.
Although I would rather use a method with a smaller footprint. There has to be a registry hack that would simply keep the screen disabled until I activate it.
Anyone?
no wakeup on reminder without s2u2
I don't like s2u2 so that doesn't do it for me. I've searched a lot on the internet but I can't find a solution that prevents reminders waking up my phone (and after that being awake in my pocket )
Somewhere in the phone there must be a list of events that can wake up the phone? Somebody knows?
Is there any solution to this problem? Last time my phone woke because of a reminder and then it sent an new appointment to a collegue while moving around in my backpack. There has to be a RegKey or smth on this
My phone is constantly waking up when not in use. There is no obvious activity that i see, such as email,SMS etc. I was told possibly when the signal or towers change it wakes up?
All i know is im at work and the darn phone keeps lighting up. Im driving at night and it's lighting up. it's in my pocket and im dialing my last call! This is also killing my batteries!
Is anyone having this problem?? Can this be fixed?? registry tweak?? Im so angry with this phone because of this. otherwise i really like this phone.
Thanks.
I had the problem of dialing when in my pocket... and a slightly different error with the lights.. the ones around the dial just won't switch off even when all the messages and alerts are cleared.
I've found that if you lock the screen so that you can only use the power button, it solves this as it's easy to unlock the phone from ur pocket (I've had it in a jacket pocket and it's done it!)
Should solve it!...
As for the lighting up... have you tried adjusting the power options for optimum battery as this solved the same issue on my Touch Cruise.
you can use TouchLockPro for preventing bogus calls. Are you sure it does not awake on buton presses, a windows mobile setting.
wake up woes
Same issue here. It seems the CDMA Sprint Diamond wakes up on new SMS or when switching cell towers and there is no way to disable that regardless of what ROM you're using. It's ridiculous... and it is my only major problem with the phone. Hopefully someone will find a better solution. Until then Locking the phone will have to suffice.
ive been using the lock feature. the only thing is it often gets "stuck" in lock mode. i will turn on the phone the backlight would be dim - like in lock mode. i can use the phone but it wont come out of the "dim" mode until i take out the battery and put it back in.
separately,
I wonder if i was using the diamond phone from another provider if i would have the same "waking" problems?
xm81bpm said:
ive been using the lock feature. the only thing is it often gets "stuck" in lock mode. i will turn on the phone the backlight would be dim - like in lock mode. i can use the phone but it wont come out of the "dim" mode until i take out the battery and put it back in.
separately,
I wonder if i was using the diamond phone from another provider if i would have the same "waking" problems?
Click to expand...
Click to collapse
I have the same problem. The phone wakes up all the time by itself. It is a problem with the defective power buttons that come on the Diamonds. No fix for that so far that I know of. It is a hardware problem, I think.
Mine wakes up when switching between home and roaming towers. Not sure about switching home to home towers or roaming to roaming. I also had my power button being bumped on from time to time; I'd take out my phone to find it had tried to dial someone, adjust the clock, etc. Very annoying.
Pocket Shield is amazing; it's the only lock app I can find that does what my Treo's always did: unlock on center button.
Works wonderfully well!
Before I upgrade my 1.93 CSL ROM to the 2.0x CSL ROM, it also always woke up itself...
After I upgarded my ROM (i.e. a hard reset) problem gone... So I think that's not a hardware problem...
Yet at this moment I'm still unclear which program caused that problem...
I've been using the locking program S2U2 which is free and it works beautifully.
When my battery falls below 50% my touchscreen begins to act weird. No matter what I select it chooses whatever option is at the bottom of the screen. I can occasionally get it to work if I reboot the device or open and close the keyboard about 10 times. Once it has been corrected it falls back to the odd behavior within about five minutes. I have established that this doesn't happen if the batter is above 50%, and if I charge the phone up only a few percent then the issue goes away.
The phone currently has Cyanogen 4.2.15.1
I'm stumped as to what could be causing this and was unable to find any similar postings on the forum. If this issue has been addressed in another thread I would greatly appreciate a link to said thread.
Any suggestions would be great. Thanks!
My G1 also has similar problem, the touch screen is totally not functioning, I still finding the cause but it's so annoying. When the touch screen is not working, I can't invoke the "Dialer" function, that means I can't dial. Also, when there's incoming calls, the dialer function can't pop up too. That makes my G1 can't be worked as a phone when touch screen is not working.
I'm having quite a few issues with my ROM'd Z phone using Paranoid. I've recently updated to the latest version as soon as I was alerted.
1. The lock screen freezes, or rather becomes limited in responsiveness. I use the swipe up to unlock. When I swipe up, the clock/notifications just bounces and eventually the screen goes dark, then off. Sometimes I can reset using the power menu, but often the screen is totally unresponsive so I have to do a hard reset. On occasion I have to reset multiple times consecutively because it locks up immediately after boot... until its finally usable again. https://drive.google.com/open?id=0B7OGcalUJSgHblZob2Q2eHNkLU0
2. The phone gets hot in my pocket. When I notice this, often it has unlocked, turned on GPS, turned on the LED, taken photos and opened apps, or a combination of things. Sometimes even made a phone call, either to a contact or a recent from the log.
3. Recently I noticed it randomly ghost selecting right in front of me. I was unable to unlock and had to hard reset the phone.https://drive.google.com/open?id=0B7OGcalUJSgHVmJhQ0FOUDdLQkE
4. I am not getting SMS alerts from Optus 321 telling me I have messages from when the phone was off, or out of service range. Often I won't know till I randomly check days later, or when I miss a call (while on another call or in service range) and they leave a message.
5. Sound drops in and out from the other party. They can always hear me. Randomly, on some calls. I can have 3 good conversations, then the next I have to call back multiple times before I get enough up time.
5a. When I'm making a call, I may not even hear the outgoing ringing tone.
6. On any new call, the the volume on my Bluetooth headset is usually down about half way. I click the Vol+ and it immediately jumps to full, the volume bar already being at full.
7. When it rings, it often takes a second or more (after the ring tone has started) for the screen to turn on.
On suggestion by a friend, I disabled a lot of notifications, but the lock screen still won't unlock even when the only thing showing is the clock.
I guess there is problems with the the phone hardware, the ROM or incompatibilities with it and an APP.
Is there some diagnostics, or an app that I can run that will log what is going on and I can have someone look at those logs for me?
You should ask in Paranoid Support Thread
http://forum.xda-developers.com/xperia-zl/orig-development/rom-paranoid-android-5-t2992023
Thankyou. I could not find it.
edit: That thread is closed. There is a link at the end for a 'new home', but that thread is under Xperia ZL. Is the ZL considered the same phone?
I'm really sorry.
i gave you a wrong link. Shame on me.
http://forum.xda-developers.com/xperia-z/orig-development/rom-paranoid-android-5-t2976930
This is for yuga/c6603/"Xperia Z"