Evry two times i switch off the phone, my MTeor looses its connection settings.
This makes it impossible to connect to the internet, wap, etc. In addition, my POP mail account is deleted.
Anyone had the same problem and found a solution ?
I called Qtek assistance but they dont know anything about this issue.
Luca
HTC WWE MTeoR
Radio : 1.06.00.10
ROM: 5.1.195.14955
Yes I have this problem too - and also a problem with call waiting - when you are on the phone and have call waiting enabled for "notification" the phone HANGS!
The MTeor has a terrible radio stack and needs urgent ROM fixes...
H
Same here. The HTC ROM is crap.
I have now updated my phone with the imate rom.
Just like the HTC ROM it looses all of the connecteion settings and email accounts and the battery life is just as crap.
This phone is a pile of junk.
Period.
I'm sure that future ROM updates will correct any problems MTeoR has.
If you recall, the qTek 9000 was far worse on it's first ROM version, MTeoR is much more usable as a v1.0 device.
@Pagemakers: I understand your frustration/dissapointment, but posting the same thing on every different thread in the MTeoR forum is not nice. Are you certain that your phone is OK? I have a MTeoR working with 3G Cosmote network and it works fine, no loss of settings whatsoever (I also have an 1GB microSD card in it, working fine). Plus, I get 3 full days AT LEAST on each battery charge (UMTS coverage all the time).
Try to send your phone for a service check or exchange it (might be a case of bad production series - happened to me with a Nokia N93).
Re;
Flashed with dopod rom . now work fine ! but only english
Hi,
i have flashed my mteor with the dopod rom..
Mail account and c° go away every 2 boots .... :-(
and when BT is actived i get less than a day battery..
etienne
Hi, the G icon has disappeared from the top bar after installing Helmi's latest WM5 rom on my blueangel... One of the reasons for upgrading was to use push mail functionality and I can't do this since it does not seem do be able to connect via gprs even tough I set up the connection under "settings".
I am on virgin UK if that helps.
Thanks for any answers !
anyone ? I would like to know who to "reactivate" gprs...
Have you had a look around for a cab with the vodafone settings? This is usually the best way to set it up IMHO.
vodafone ? but i'm on virgin (using the T mobile network I think).
I've tried to install this cab but noticed no difference even after soft reset...
any other ideas ? I am a bit confused as to why it does not work after upgrading to WM5
Well i downgraded to WM2003 yesterday and straight back onto WM5 and it did the trick ! The g icon reappeared... Still a mystery to me but at least it works now.
My original HTC (Radio 1.27.12.11) never was able to recieve or create voice calls via 3G nor do any data transfer. Only GSM mode was working, but then for what reason I was going for the Kaiser ?.
Thanks to Pof's work on the HardSPL tool and Dark Simpsons "htc rom tool" and all others contributed to this tools, using the posted french ROM with Radio 1.27.12.17 and the rest from the original HTC rom I compiled a new ROM image.
With this Radio rom I just confirmed that 3G is now working using voice and data. All former 3G problems are gone.
Steps:
- Downloaded original HTC rom and French rom
- Using "NBHextract.exe" to extract the rom components.
- Using the "00_unkonwn.nb" from the french and the rest from the original HTC rom and compile using "htc rom tool" a new rom.
- Now using HARD SPL to install new boot loader and then just transfer the new rom using the original HTC upgrade package with the new rom instead the original one.
Regards
can you post your rom ?
dauphinas365 said:
My original HTC (Radio 1.27.12.11) never was able to recieve or create voice calls via 3G nor do any data transfer. Only GSM mode was working, but then for what reason I was going for the Kaiser ?.
Thanks to Pof's work on the HardSPL tool and Dark Simpsons "htc rom tool" and all others contributed to this tools, using the posted french ROM with Radio 1.27.12.17 and the rest from the original HTC rom I compiled a new ROM image.
With this Radio rom I just confirmed that 3G is now working using voice and data. All former 3G problems are gone.
Steps:
- Downloaded original HTC rom and French rom
- Using "NBHextract.exe" to extract the rom components.
- Using the "00_unkonwn.nb" from the french and the rest from the original HTC rom and compile using "htc rom tool" a new rom.
- Now using HARD SPL to install new boot loader and then just transfer the new rom using the original HTC upgrade package with the new rom instead the original one.
Regards
Click to expand...
Click to collapse
can you post your rom ?
rom location
Just replace the rom in the HTC_WWE rom-installer with this one. Worked for me without any problems with Kaiser got from UK, but no warrenty
http://rapidshare.com/files/61052345/RUU_signed_WWE_1.56.405.5_22.45.88.07_1.27.12.17.zip
Update: After 24h using 1.27.12.17, problems just partly vanished
Looks like it was a bit too optimistic. Here are the results of 24h usage:
-3G voice and data are sometimes working. With the 1.27.12.11 it never worked with 1.27.12.17 it work for some calls / times and then 3G still looks like logged into the 3G-Network, but phone is unreachable. The phone needs to be switched off/on again to get it working. Then one call / data connection / incoming call is possible. After that darkness again. At least one 3G action is possible in comparion to earlier radio rom, but it is still far away from perfect.
It is an improvement but HTC has still to do a better job with the radio rom. Hope we will get an update soon behind 1.27.12.17
dauphinas365 said:
Just replace the rom in the HTC_WWE rom-installer with this one. Worked for me without any problems with Kaiser got from UK, but no warrenty
http://rapidshare.com/files/61052345/RUU_signed_WWE_1.56.405.5_22.45.88.07_1.27.12.17.zip
Click to expand...
Click to collapse
thanks, I'll give it a try in a few days.... as to warrenty - HTC appears not to honor warrenties, HTC US said "not our problem", HTC UK has not answered in over a week....
If yo can live with french try the french rom
... now I run for 24h with the french rom, no customization.
It is better then the HTC with the replaced Radio, posted above. I can call 3G, do data connections and receive incoming calls. It seems after 24h pretty stable. Therefore it looks like changing the radio is not enough and that as the french rom using a slightly newer OS then HTC original, there are some changes too included.
- Problem: Roaming between GSM and 3G, somtimes the phone needs 5 or more minutes to login into the network again after areas with no coverage. Completly different to the Nokia N95, which can handle such issues with no problem @ all
- About HTC service. I called them too and they tried to direct my to a service partner I should pay for getting my problems solved, that is very different to what I understand about warrenty too.
I would be really thankful for anyone who could produce a Radio-only flash available using the French .17 Firmware.
The stock .11 radio ROM is completely, I mean really completely useless for me. Any time I try to write a SMS, make a phone call or data connection my Kaiser immediately loses the connection to the network and I have wait for the phone to reconnect itself. I also cannot receive any incoming calls.
I remember that the first radio ROMs for the Hermes were terrible but this is even worse. Too bad because I'm really enjoying the rest of my Kaiser so far.
It is not only the french radio rom .17 ..
I have done lots of test and added above a rom HTC with french .17 radio stack. But there is more then then just the radio. It is better with the mixed rom, but still not good to use it as a reliable phone.
Best what you can do is using the french rom and you get a 50% chance that 3G works incoming and outgoing.
I'm rather new to creating my own cooked ROMs so I'm right to think if I want to upgrade my Kaiser to the .17 Radio ROM, the only thing I need to do is create a .nbh file from "02_Unknown.nb" and flash the resulting nbh file using CustomRUU and my Kaiser will not be completed formated?
I'm asking this because my Kaiser is now perfectly configurated and personalized and I don't want restart install all my programs, I just want to try the new Radio ROM because the current version is completely useless.
Thanks for any info
well disregard my previous post, I just successfully flashed my Kaiser with the new Radio ROM and hopefully I will actually be able to call someone with my PDA phone.
Hi all, first I have to say that I'm in Dublin Ireland using vodafone and have my kaiser for about 3 weeks now and the most odd thing about that would be that it has been working fine 3G and 3.5G when within good coverage. All of a sudden last sunday it just stopped working with 3G I believe that network provider just changed something with its settings but I can't be sure. I would love to see a radio update soon but since I don't believe in miracles I've been trying some temporary workaround just to be able to call and text. It seems that it enough to go to settings -> phone -> network and set the BAND TO GSM. This way it doesn't use 3G but at least I can use the phone. Hope it could help anyone there.
Thanks for the info, I'll try that eventhough the .17 Radio Update did improve network connection somewhat but it's still subpar.
FYI, I was last Saturday in Dublin, eventhough only for an hour, and of course I tried my Kaiser but the 3G data connection completely refused to work. This was when I still had my .11 Radio ROM installed.
So far I have tried my Kaiser in London, Malpensa, Madrid and Berlin so the issue seems to be rather ROM related than provider related.
you're right, it has nothing to do with the provider I was wrong. I took my card from Era Poland with roaming and turned on my Kaiser. On O2 I had two bars on HSDPA and that beautiful H letter on the top of the screen but not possible to make a call, send sms or whatever. Switching to gsm always works. I upgraded to .17 and it looks exactly the same as it was I see no difference at all. The only thing that bothers me at the moment is that for me it's been working fine for some time. I've been using 3g in Dublin and Warsaw as well and for some reason it just stopped I just hope it's not any hardware issue.
Is this rom posted on #1 a radio only or the whole thing?
I have the same problem over here. I have the Tytn2 for one month now. I had vacation and i took the plane at Amsterdam (Schiphol) to Tenerife.
When i arrived in Tenerife i get a 3G icon and cannot make calls and cannot internet. I had manually switch to GSM band. Now back in Holland with auto-settings i have the same problem again. With 3G i can do nothing (call/internet). Anyone any idea?
I have a vodafona abbo, my simcard in the old tytn1 with same settings works well at 3G. Soon i call with htc!
Same problem here with HTC Tytn II in Holland on T-mobile,
switched 3G to GSM and luckely I can use the phone now,
but I really hope there will be a fix soon!
Thanks!
Same on AT&T
I'm having the same problem with my tilt. I had the 3G before the flash but have not had it since.
same her in nyc ...tried both radios....3g doesnt work....help....please
A hard reset does NOT fix the 3G call/internet problem
When i switch the telephoneband from auto to GSM the phone get's connected at G and i can call. But i want videocall.
Please someone ? Defect or waiting for rom ?
I too am experiencing this problem. It happened overnight one night -- 3G will not connect -- neither voice or data, but GSM (edge) works fine.
I'm on ATT, HardSPL with Schaps 4.22 rom. It was working fine in this configuration, then suddenly stopped. Tried Hard reset (no help), and tried upgrading the radio to .17 (also no help). Next step is to try and revert to original ROM/Radio/Bootloader (per "how to restore to factory for rma thread") to see if that helps.
If anyone comes up with a solution, I'd be grateful.
Hi guys, As you have prob seen from other posts from me I have been having troubles and tried different Roms, I am now running the AZTOR's latest rom after recommendation and I must admit is almost perfect nice and fast, phone no longer getting hot and the phone quality in call is fine.
However there is 1 major issue I need to overcome in order to keep this otherwise i am going to have to try and go back to the crappy T-Mobile rom,
Ever since I upgraded the rom (and doesn't matter which rom I am running) my Active Sync will not connect to our Exchange server over the internet. I have verified all the settings multiple times and even checked the other HTC phones in the company (of which all are working perfectly) my one just takes a few minutes then comes back saying it couldnt connect to the server with error number:
0x80072F78
Has anyone else experienced this or know how to fix it? I really need to the Active Sync to work over the internet or I am a bit buggered.
The only other Issue I have is I did have a fairly good HSPDA signal at my work location before the rom upgrades now I only have 3G and when I go out onto the road it will briefly flash up with HSPDA but only one bar then switches back to 3G So the signal strengh is worse then it was with the T-mobile rom.
Here are the version nos on my phone:
Rom: 2.03.405.2 WWE
Date: 12/23/08
Radio: 1.00.25.05
Protocol: 52.29.25.12H
Bootloader Screen:
DIAM200 64MB
SPL-1.93.Olinex
MicroP-Diam (LED) V11
PSOC-Vict STAGE_PVT v0x20
Also trying to get the T-Mobile Rom back and the T-mobile Tech Guys says I need to get it from HTC and HTC says its T-mobiles job to give it to me.
Who do I beleive?
Regards,
Max
Hey...so this is my story. i tried to figuere out if somebody got the same probs but couldnt find it anywhere so i am just asking all of you thanks...
SO here we go...
My Provider is E-plus and i live in Stuttgart (germany)
I got my HTC kaiser about 6 month ago and it always worked well and i didnt have any problems. I had reception everywhere (also in my room). The regular Windows mobil was installed i didnt change anything.neither the rom version nor the radio rom. so everything was how i got it in the beginning.
Then i have flashed the new version of Windows mobile 6.1 (downloaded from the HTC homepage,sorry i dont now the specific name and which radio version it was) but from that moment on my mobile phone didnt reciept in my room anymore. There was always the "!".
Then i have tried:
- to look for reciept manually (it found different providers but couldnt connect with those
- i ve tested my sim card with other phones and it worked
- i have tested different Roms and radio roms such as:
original rom
L26_KaiserDiamond_V9 (englisch)
Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 (englisch)
German clean WM6.5◄ by ChrBeck (CHome)
- different radios such as:
KAISER Radios These Radios were ripped from Kaiser WM6.1 ROMs.
1.65.14.06
1.65.20.29
1.65.16.25
1.65.17.56
1.70.19.09 -
1.71.09.01 -
lots of 1.58.XXXXX and 1.64.XXXX
and even more
--> they all work while i am not in my room. but non of them worked in my room...and it did before.
then i decided to use the original version again which i did
i ve installed Rom:
CE OS 5.2.1620(Build18125.0.4.2)
1.56.407.3
Radiorom: 1.27.12.32
What happened now is that it shows that it got full reception but the phone still doesnt work in my room. but i can use the UMTS date transmission --> i can use the Internet
as soon as i am outside and soft reset the mobile phone it works perfectly.
i am not shure if i have listed everything that is important but if somebody could help me with that i would be pretty cool because a mobile which is just working half of the time isnt very usefull...
any ideas? thanks
Seems like your phone sees the signal seded by the Mobile Operator to you but it isn't able to send a signal back to tell the operator that it is there. Seems like something causes your internal Antenna of the phone to be not as powerfull as at the beginning. Maybe you installed a Radio that has lowered the power and no Radio will rise it again cause the radio things you are in a power restricted area.
In my Charmer I was able to get the power of the radio unit 10% up but the trick doesn't seem to work for the Kaiser. Maybe an user with more Kaiser knowlege can help you better.
Anything new in your room (or nearby) that might be causing interference?
thats what i thought first too...because i ve installed wireless power point...but i have deinstalled them in my room again and it didnt work neither