Database Develop

Notification "Bubble" Question

First, I have searched these forums using both Google and its own search engine in an effort to answer my own question. I came across a good number of posts that raised the same question but did not have an offered solution. If I have missed the correct post, please link it.
The question is simply "how do I eliminate the "Notification" bubble that pops up and reminds me that I have unread e-mail AND the "Notification" tab at the bottom of the screen that has to be dismissed before my standard soft-key "Calendar" reappears?"
I have a program that tells me how many unread e-mails I have; I do not need another one. I want the phone to play a sound (if desired) on a incoming e-mail and then just give me the icon that shows the number of unread e-mails. I do not want to see the "Notification" bubble pop up at the bottom of my screen or the remaining/returning "Notification" soft-key on the bottom bar.
I have already gone into the Settings > Sounds & Notifications > Notifications and turned everything off related to e-mail. I have even tried editing the registry, as suggested in another post such as:
______
"...... found this on another site. It may help you..
1. Install a registry editor like Resco File Explorer’s add-on registry editor or PHM registry editor.
2. Open HKEY_CURRENT_USER
3. Tap control panel>notifications
4. Tap default
5. Tap options
6. Choose what value will be applicable to you and replace the default number with it (for XDA Atom, the number was 13, I replaced it with 8 to suit my preference):
0 show icon
1 show icon and play notification sound
2 show icon and vibration
3 show icon and vibration and play notification sound
4 same as 0
5 same as 1
6 same as 3
7 same as 3
8 show icon and notification bubble
9 show icon and play notification sound and show notification bubble
10 show icon and notification bubble and vibration
7. If you want to configure how long the notification bubble will stay on the screen, tap on duration instead of options. Change the number there into the number of seconds you want the notification bubble to stay up."
____________
The foregoing does not work for me - or I may be doing something wrong. Any help would be appreciated.

I have had the same problem no matter what ROM I use. Cannot figure out how to turn off email notification.

How about trying:
Settings
Personal
Sounds & Notifications
Notifications
Messaging: New E-mail Message
& uncheck Display Message on screen.

Thanks GSLEON3 for the suggestion....but as stated in paragragh 4 of my post, I have already tried that and I still get the nuisiance notification. I have also tried editing a few of the suggested registry values (with no luck obviously) and, according to my search of the forums, this is not the first time the question has been asked.
I am confident one of the brainy ROM modders has the answer.......maybe?

it can't be done, the only thing that you can get rid of is the message automatically popping up, which is what the settings change refered to in paragraph 4 does. You will always get the ntoification icon and on the left soft key. Someone would have to hack the resources that tie into tmail.exe (tmail.exe is the app that the mail client uses).

smittyofdhs said:
it can't be done, the only thing that you can get rid of is the message automatically popping up, which is what the settings change refered to in paragraph 4 does. You will always get the ntoification icon and on the left soft key. Someone would have to hack the resources that tie into tmail.exe (tmail.exe is the app that the mail client uses).
Click to expand...
Click to collapse
Thanks. Now I can quit worrying about trying to fix it. It is, however, a nuisance.

"Someone would have to hack the resources that tie into tmail.exe (tmail.exe is the app that the mail client uses)."
OK This is way over my pay grade, so who wants a PayPal donation?

I found a way, sort of
Had the same problem until I found this post
http://wiki.modaco.com/index.php/Windows_Mobile_5_Registry_Tweaks
Disable SMS received notification
The following setting disable SMS notification and sms recieved icon on screen
HKCU\Software\Microsoft\Inbox\Settings\SMSAvailable = 0
To enable again
HKCU\Software\Microsoft\Inbox\Settings\SMSAvailable = 1
The upside is that it gets rid of the bubble, the downside is that is disables all native notification for SMS. I'm using PocketCM, so I still get visual notification, but no sound or vibration.

I have come accross that post as well...unfortunately, it only addresses the issue of how to disable the SMS notification (which other registry tweak apps do as well). I am more interested in disabling the e-mail notification bubble, that has to be "Viewed" or "Dismissed"...............
Thank you (anyway) for the input.

net connection notification bubble & unessary services processes

1. Is there anyway to disable the notification bubble when Tilt notifies its connecting to the network, tired of preesing hide.
2. Is there any resource that identifies unessasary startup services/processes so as to disable them.
3. By the by has anyone expierienced the following.... Upon using the power button to turn off the backlight, the backlight will flicker on and off intermittently... seems to only happen when connected to power.

I just figured this out for number 1 and wanted to post it for posterity
Set the REG_DWORD Options to 0 in
HKEY_CURRENT_USER\ControlPanel\Notifications\{8ddf46e7-56ed-4750-9e58-afc6ce486d03}

OMG pennywisdom! I have been looking and looking for this information for a looooong time. Thanks a lot!!!!
BTW, does this also disable the 'could not connect' notification bubble? This bubble often comes up while using tomtom navigator in an area where the network coverage is poor and tomtom traffic keeps trying to connect. The bubble comes up, then if you don't acknowledge, tomtom loses focus and screen goes into screensaver...... and so on. Highly annoying! and dangerous while driving!!

For a "resource identifier" I use Dinarsoft's MemMaid and SkTools. They have a clean option that sorts out registry issues and finds bad schorcuts and uninstall data. You could also see if the rom your using has HTC task manager in settings and just shut down open apps from there.
The screen flash when you press the power button happens on some roms, i forgot how to disable it (been out of the scene for a bit) but i'm sure you'll find the solution if u search for it.
pennywisdom said:
I just figured this out for number 1 and wanted to post it for posterity
Set the REG_DWORD Options to 0 in
HKEY_CURRENT_USER\ControlPanel\Notifications\{8ddf46e7-56ed-4750-9e58-afc6ce486d03}
Click to expand...
Click to collapse
Why do a reg edit when its already available in the settings?
Go to Sounds & Notifications in settings, notifications tab on the bottom (how you change your ring/msg tones) Click the "Event" drop down list and select Connection Established, uncheck the box "Display message on screen" .. there you go.

The sounds & Notifications fix does not prevent the 'could not connect' notification bubble for me. Too bad - I have a basement office where connectivity is intermittent at best. Even although I have a rock solid WiFi connection the 'could not connect' notification bubble interupts me a lot.

fone_fanatic said:
Why do a reg edit when its already available in the settings?
Go to Sounds & Notifications in settings, notifications tab on the bottom (how you change your ring/msg tones) Click the "Event" drop down list and select Connection Established, uncheck the box "Display message on screen" .. there you go.
Click to expand...
Click to collapse
The short answer is that I had no idea it was there, but it's good to know now so I don't have to remember that registry entry. Thanks!

Registry key for Notifications

Does anyone know what registry key corresponds for "Display message on screen" at Notifications for Reminders.
After I check it and do a soft reset it looses this setting.
I want to made it direct in registry.
Thank's

What Notification are you trying to modify?
Usually the "Options" value has to be set to 13 (its a DWORD) for the notification to display.

Start, Settings, Sounds & Notificatios, Notifications, Event=Reminders, Display Message On Screem

jbilau said:
Start, Settings, Sounds & Notificatios, Notifications, Event=Reminders, Display Message On Screem
Click to expand...
Click to collapse
Use a registry editor to go to HKCU\ControlPanel\Notifications\15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD then change the Options value to 10747869 (Decimal value).
Hope this helps!

Vibrate on notifications/sms

Hi
is there a way to set the nexus to ring AND vibrate when i receive a sms?
thx

You should check the settings.
Go to your Messaging application.
Hit menu.
Settings.
Notification Settings.
Vibrate <= that is the one you want to check.

thank you, i guess it was pretty straightforward but i didnt think of it, i thought that notifications from the sound/notifications is applied to sms and didnt check messaging options

[Project] Chat Heads For Any App

IMPORTANT: You need these for this to work:
Tasker
AutoNotification
AutoTools
You know how some apps allow you to create floating bubbles (chat heads) when you receive a chat from one of your contacts?
Would you like to have that available for all chat apps?
Check it out!
Import the project from here, enable the profiles and you'll start seeing the bubbles right away! :laugh:

Just imported the project and it's working flawlessly. The default replying from the notification drawer requires a couple of tapping and swiping, but this works in a very easy way and over any app. Thanks!!

niyonsv said:
Just imported the project and it's working flawlessly. The default replying from the notification drawer requires a couple of tapping and swiping, but this works in a very easy way and over any app. Thanks!!
Click to expand...
Click to collapse
May i know the steps you get it done? I have import the project but notification panel showed No profile active.

DanialMus said:
May i know the steps you get it done? I have import the project but notification panel showed No profile active.
Click to expand...
Click to collapse
Yes, the notification panel doesn't show any activities with this project. First I installed the Auto Notification app, gave all permissions. After a few minutes it started giving me the popup messages from WhatsApp and SMS organizer.

niyonsv said:
Yes, the notification panel doesn't show any activities with this project. First I installed the Auto Notification app, gave all permissions. After a few minutes it started giving me the popup messages from WhatsApp and SMS organizer.
Click to expand...
Click to collapse
Thanks, yes , after some time its working now.

How would one expand this to show MMS?

How can I get rid of the vibration when I click on the bubble?

I cant seem to get this working. All the permissions are given and Apps are installed (even Auto Tools since this was needed). Does Autotools need to be the Pro Version for this to work?

Love this project, thanks.
One question: i would like to turn of the toast notifications on the bottom of the screen. Any tips?

Retoki said:
Love this project, thanks.
One question: i would like to turn of the toast notifications on the bottom of the screen. Any tips?
Click to expand...
Click to collapse
Go to Auto Tools, Logs and Alerts, uncheck all boxes under Web Screens.

This looks great. But it doesn't work at all for me. Had it installed for 3 days now and I never have gotten a bubble to show up. I've granted all necessary permissions too.

Didn't work for me either. Imported project and no go. Mine already showed it had the bubble option in messages notifications. Was hoping this would work. Pixel 3 xl android 10 with root. No go.

For those who couldn't get it to work, did you create a task in Tasker adding the plugins?
Is there a way to customize the Avatar in the floating icon? Like in the video shown? Mine just had the generic emoji guy.

I really wanted this to work as well, but it has been a no go on my Pixel 2 XL. Would have do to with being on Pie?

@rafe83 @S8rooted&tooted
I just imported it and it works fine on a pixel 3XL, Pie.
From the description notes when you import the project;
IMPORTANT: Make sure to enable the AutoNotification Notification Listener to make this work. Open Tasker > Menu > More > Android Settings > Notification Listener > Enable AutoNotification.
Click to expand...
Click to collapse
That is the only configuration that is require.
As long as AutoNotification can intercept notifications that have a "reply" action, the chat head should appear. If not, look in your Tasker run log.
@Kwandds
The profile, "Intercept Notifications With Reply Action" contains a default icon for when the notification intercept does not contain an icon that can be used. It's set in A4
A4: Variable Set [
Name:%anicon
To:https://previews.123rf.com/images/metelsky/metelsky1809/metelsky180900233/109815470-man-avatar-profile-male-face-icon-vector-illustration-.jpg
Recurse Variables: Off
Do Maths: Off
Append: Off
Max Rounding Digits: 3
If [ %anicon !Set ]

So should the icon change depending on who is sending the message? Because on mine it's always the same default icon.
Thanks

Kwandds said:
So should the icon change depending on who is sending the message? Because on mine it's always the same default icon.
Thanks
Click to expand...
Click to collapse
The notification intercept is looking for an icon in the notification that triggers the profile. If %anicon is not set, you get the default.

ktmom said:
The notification intercept is looking for an icon in the notification that triggers the profile. If %anicon is not set, you get the default.
Click to expand...
Click to collapse
Sorry for the amateur questions, but hope do you set the %anicon?

Kwandds said:
Sorry for the amateur questions, but hope do you set the %anicon?
Click to expand...
Click to collapse
The AutoNotification event that triggers the profiles scrapes the notification for various information, including an icon. The variable "%anicon" ("an" represents AutoNotification) would contain the path to the icon in the notification if it exists.

Thanks to everyone on here. So I tried again and got it working. Only thing I did was go threw and select in the profile which apps to use. Question, anyone know how to change the color of background and size of pop up that displays. I wanna go a little rounder than the square text input that pops up. And thank you guys for posting different things to try. Finally just kept screwing around and found in each switch in the profile has to be set to package if it can be.