Database Develop

PLEASE HELP!! cant connect to the network :(

Hey everyone ..
i was using my Blueangel normaly and so happy with it until i faced this problem before 2 days ..
I was texting my gf while i was out and kept on even though the battry gave me a warrny that its really low .. i ignored and kept SMS's her until it went off.
i went home charged my device but its not connecting to the network. it shows either "No Service" (where it shows X beside the signal tower) or "Searching" (where it shows ! beside the signal tower).
Please anyone knows how to turn it on im really in a bad situation here.
Note: just to let you know im using WM5 Hemi's rom and upgraded it today to Xplode's rom just hoping it would help.

Well when i tried another sim on my blueangel it worked and my sim card on another mobile it worked also. im really losing my brain

44 views no one have a slight idea..
anyways thanks alot everyone for visiting

Hi,
All I can suggest is to re-install radio rom! prob 1.15.
If not that then ensure flight mode is NOT active, and battery's fully charged
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
It seems wierd that another sim worked on your BA, must be a faulty/damaged sim.
I also note you've tried the non-working sim on another phone and that works! Wierd that too!
Hope that helps,
Sunny

Have you tried to manually select the network in the "Phone" settings screen? I've heard of similiar problems being fixed by that.

well after i asked here and there and got disappointed with I-Mate people.. they know nothing at all
an IT in my company told me the problem is with my sim card. its damaged cause of the change in the battry power (as he says) it damaged the frequency that my mobile use to read the sim so there for it would work on any mobile except mine.
so i would change the sim but it needs me ages to get free and do that.
THANKS ALOT TO EVERYONE ATLEAST READ MY THREAD OR TRIED TO HELP
YOU GUYS HERE ARE THE BEST

By the way
sunny: the Radio is already 1.15 from ages. but thanks alot for trying to help me.
Fraser: I tried to manualy select the network but it says there is no network which is funny cause there is 4 networks in my area.. actuly im working with the same operator so im inside the tower LOL. the signal streth is the best here.
Thanks alot mates

No problem!
Thats what we're here for!
Regards

Same problem
I once had the same problem. Now I'm no genius when it comes to these phones and it actually took me a whole week to get an idea of what the hell happened to my phone. Basically, these phones are Quad Band (GSM 850/900/1800/1900) and for some reason after I upgraded I lost my signal. I found a little application that let me reselect my band (its not built into windows for some reason) and that solved my problem. I just selected "Auto select" and the problem was solved after a soft reset.
Now, I can not remember what that application was but maybe that can give you an idea of what to search for.

No Service issue
sunnyd24 said:
Hi,
.......
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
...........
Hope that helps,
Sunny
Click to expand...
Click to collapse
Hi, is there more 'democratic' way to resolve this issue than reseting BA twice?
After installation of xplode's R4 for noobs an old version of R 1.06 was left on BA. Thinking that this was a reason for No Service of the phone I dumped latest R , but double f..reseting necessity still persists ...
Is that a normal thing to reset twice such an advanced device when you want even just to call smbdy? Thanks

there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this

xplode said:
there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this
Click to expand...
Click to collapse
Hi hi there! First of all please accept my deepest appreciation for such a great work you have done to make us - PPC ordinary users - little bit more happy Just one small note - is it possible to upgrade your downlodable R4 file with all necessary ROMs - Radio, etc., etc. With the intention that every Noob trying to upgrade his/her BA, should do it in a push of one button - not searching for separate latest ROMs and HowTo instructions? Thanks for your time!
P.s. Sorry it seems came out little bit off topic....

well it is possible but i have no time to do it. or you can try to copy the radio nbf file into the folder of the nk.nbf and run the upgrade utility

Any solution on this matter ? I am using Helmi MW6 ROM with radio 1.15.00 and i'm having the same problem.
I've searched the forum but found no solution yet.
JP

Radio Rom 2.71.11

I have not seen it mentioned anywhere but in one thread in upgrading but radio rom 2.71.11 is out and working well on wizards...original thread is here: http://forum.xda-developers.com/showthread.php?p=1808328

famewolf said:
I have not seen it mentioned anywhere but in one thread in upgrading but radio rom 2.71.11 is out and working well on wizards...original thread is here: http://forum.xda-developers.com/showthread.php?p=1808328
Click to expand...
Click to collapse
Been using it on my wizard. good battery, great signal... don't seem to have any missed calls with Octavio's 6.0

It really is a much improved radio! Before, when I was out and about, somewhere between 10 and 20 feet inside the doors of Walmart and Costco, I would lose signal. Now I can go anywhere within those two metal-clad warehouses and never lose signal...even receiving and making calls within!
Needless to say, I'm very pleased.

missed calls have shown up...
Hi,
After installing the radio rom 2.71.11 on my phone (K-Jam with TNT 1921 rom) missed calls have shown up In one day I missed 3 (out of 8) calls. Additionally my phone locked up (just freezed!) while I was trying to make a call.. So, I switched back to 2.69.11
Cheers,
Orhan

I have been using it from the last two days and no missed calls and great signal.

Same here...no missed calls...been using it over a week now.

works great so far, no miss calls.

Been on my phone for weeks and I have better signal, About the same battery life.

Works Great
I had microphone and speaker voice scrambling and noise issues with older Radios apart 2.19 and 2.25 but this is even better
Thanks

testing it now...I'll let ya know...
*edit* I'm not finding any better reception...will continue to test though...

I had this for weeks now and I have no problems at all too.

The signal icon doesn't update
I have the Black Diamond 3.1 rom on my T-mobile MDA, updated from
a 2.25.xx radio verison to 2.71.11 and now my signal icon doesn't update. its stuck on whatever signal i have upon startup. I thought at first i was getting great signal everywhere, then my calls started dropping with 5 bars and i restarted and it showed 1 bar instead.
Anyone else have this problem? Anyone else using the 2.71.11 radio with the Black Diamond 3.1 rom?

Hi,
That is a nice version.
How can I install this ROM and do I loose all my settings when installing it?
Many Thanks

been using it for a week.... upgraded from 2.69.11.
seems stable and has better strength, but cannot confirm if it has absolute improvement over 2.69.11 until further testing.

how to downgrade radio rom
famewolf said:
I have not seen it mentioned anywhere but in one thread in upgrading but radio rom 2.71.11 is out and working well on wizards...original thread is here: http://forum.xda-developers.com/showthread.php?p=1808328
Click to expand...
Click to collapse
Hey,
i just upgraded to this rom listed, but since then my network signal has gone off.. i am using O2 Mini S please help me how to downgrade or get my wizard working.
Thanks in advance

vikasmestry said:
Hey,
i just upgraded to this rom listed, but since then my network signal has gone off.. i am using O2 Mini S please help me how to downgrade or get my wizard working.
Thanks in advance
Click to expand...
Click to collapse
Just flash previous version of only Radio ROM. If this does not work for any reason, flash your stock ROM.

where will i get the old radio rom ??
Fallen Angel said:
Just flash previous version of only Radio ROM. If this does not work for any reason, flash your stock ROM.
Click to expand...
Click to collapse
hey fallen angel,
thanks for your quick reply but .. i don't have the orignal radio rom with me ... and wht do you mean by stock rom.. see i am a newbee out here.. so any attachements would be more helpful.
thanks again

Fallen Angel said:
Just flash previous version of only Radio ROM. If this does not work for any reason, flash your stock ROM.
Click to expand...
Click to collapse
Hi,
Do I have to put ActiveSync in Guest Mode before running the Radio ROM reflash or can I leave the ActiveSync Partnership intact?
Thanks.

Everyone is hoping and praying that there is a new radio that combines the stability and great battery life of radio 2.19 with better reception like 2.61. 2.71.11 might be it, but its soo new its hard to tell right now.
vikasmestry said:
hey fallen angel,
thanks for your quick reply but .. i don't have the orignal radio rom with me ... and wht do you mean by stock rom.. see i am a newbee out here.. so any attachements would be more helpful.
thanks again
Click to expand...
Click to collapse
Vikasmestry, but since it doesn't work out for you here's a good alternative:
http://rapidshare.com/files/84722422/T-Mobile-UK_2.19.11_Radio_Only.zip.html
Its the T-Mobile UK 2.19 Radio I spoke about. This is considered one of the most stable (no missed calls) with great battery life and a good signal. Its being used by all versions of the Wizard and in nearly all countries by someone. So don't let the T-Mobile and UK description bother you.
Download, unzip and run the ROMUpdateUtility.

I've been using this radio for a week now, seems OK. I think the signal strength is a little better then 2.69 and the power consumption is about the same. No missed calls, but the missed call radio tweak is still installed in my wizard.

Advise please?? 3G no longer connects after update.

Does anyone know how/why this could have happened. Perhaps it was a coincidence that my phone broke at the time of updating....but I just have a feeling something else has happened. I updated to Dutty's Diamond ROM and HardSPL 3.29 and after that, I cannot use 3G at all. I show I am connected to the 3G network, but I cannot make/receive calls, or use the internet. If I turn off 3G, all works fine. I tried 3 or 4 radios to see if that would help, but none did. After trying many things, I decided to go back to my original setup as it worked fine before.....but I still cannot use 3G now. I get a 3 or 4 bar signal on the 3g network it shows, but I cannot make/receive calls or use the internet. I did make sure HSDPA was enabled in KaiserTweak and Advanced Config.
If anyone has any idea...I would be so grateful to hear. I am at a loss over what could have gone wrong...or if I need to send the phone in for service.
I used to run this setup before this issue:
ROM: Alex.v52.ATT.162.cube.rom
Radio: 1.27.14.09
SPL: SPL-1.0.Olipof (Kaiser-HardSPLv1)
I updated my Kaiser to the following:
ROM: Duttys_Diamond_Rom_Ruu_Signed_5.2.1588_1.65.16.25_V1.zip
Radio: 1.65.16.25
SPL: HardSPL - 3.29
after the update, I tried the following Radios to see if it would fix the 3G issue. None of them did...
1.58.25.17
1.65.20.29
Niki Radio - 1.58.11.07
Thanks for any help or suggestions!!

This might be bad info but worth a try.
1. make sure there are no proxies being used
2. make sure all the network settings are correct for your provider
3. maybe post this problem in the thread of the rom you're using.
4. Flash back to the old rom to see if it's a hardware problem.

Thanks Chumley for the quick response!!!
I just verified no proxies are being used at this time... tried with them on and off.
I did revert back from SPL3.29 to SPL-1.0.Olipof (Kaiser-HardSPLv1) and reinstalled the old ROM I was using for the past several months.
Just turned on 3G and cannot make calls or receive them. Also cannot visit any webpages.
I am thinking I have a hardware issue at this time... but curious if I did something wrong that may have caused this.
Thanks for your suggestions... I appreciate it very much.

There was a thread last week like this and at least 2 people reported having a hardware problem. The problem was almost like yours.
http://forum.xda-developers.com/showthread.php?t=396459
OMG!!!! I just helped someone without flaming them...... Something must be wrong.

Well it sounds like what I didn't want to hear. Thanks for that link!
Just wonder why it started the moment after flashing a new ROM/Radio/SPL.... seems like it is related in some way... but who knows.
I guess it was a good run with 3G data while it lasted. ha ha
If anyone knows any ballpark figure on service costs to repair a Kaiser phone, I would love to hear it. I am guessing though that it will not be worth shipping it in for service. Well maybe it will be.

No warranty?

I will have to look into the warranty. I didn't purchase anything extra...so I was sort of assuming there was a 30 - 90 day warranty which has past. Maybe it was a 1yr. Going to have to dig out the paperwork.

Switching from T-Mobile to ATT? Help Please

I just got a Diamond last week and have been using it on T-Mobile in the United States, and it's great and all but I don't think I ever got Data to work... But that's irrelevant now, because my family just suddenly switched my plan to ATT after being on T-Mobile for 10 years, so now I need to switch my Diamond to an ATT network. I put the SIM card in, and the Diamond asked me if I wanted to change settings and I said yes. I restarted the phone, but I still can't get a connection, I have no service. Please help -- what should I do to get this phone going for calling and texting, and then switching my old number over? I'm not concerned about Data just yet.

Try running the Connection Setup wizard again. Mine worked fine on ATT after it automatically configured it.

Yeah I tried running it again, still nothing. Next to the little signal indicator, all I've got is the exclamation point. Do I need to somehow delete old settings?

One thing I've done after flashing and after the setup has run is change the following: Settings/Personal/Phone/Band -- Set network type to GSM, and band to UMTS(850+1900)+GSM(850+1900). I'm not sure if it makes a difference though, and I don't really know what settings the Connection Setup changes. Maybe the band settings will work for you?

That was the first thing I tried. I just got off the phone with ATT for 2 or so hours, and their solution was to visit a local store. I'm going to try this tommorow. In the mean time I'm stuck using some LG free phone

GeckoDev said:
One thing I've done after flashing and after the setup has run is change the following: Settings/Personal/Phone/Band -- Set network type to GSM, and band to UMTS(850+1900)+GSM(850+1900). I'm not sure if it makes a difference though, and I don't really know what settings the Connection Setup changes. Maybe the band settings will work for you?
Click to expand...
Click to collapse
How does your Diamond run UMTS 850/1900? I know they unlocked 850mhz GSM, I didn't know UMTS was unlocked as well...

Black93300ZX said:
How does your Diamond run UMTS 850/1900? I know they unlocked 850mhz GSM, I didn't know UMTS was unlocked as well...
Click to expand...
Click to collapse
This is what it says in the settings. I was surprised myself, as I've never even flashed my Diamond..

DrSilverworm said:
This is what it says in the settings. I was surprised myself, as I've never even flashed my Diamond..
Click to expand...
Click to collapse
No **** huh? Where did you get your Diamond? Does 3G work perfectly in the states?

t-mobile to ATT
I just went from t-mobile to att.
i just popped the att sim card in and it configured it to att automatically. I also updated the rom which allows you to get a GREAT signal with att. Before the update ROM my signal was spotty. Where i got 1 bar i get 4 now.
Good luck ...it should work. But!!! no 3G....however its fast enough for me for what i use it for. IM very happy with my Diamond.
Rom 1.37.456.2 WWE
Rom Date 6-19-08
Radio Version 1.00.25.05

wfhowell said:
But!!! no 3G....
Click to expand...
Click to collapse
That's what I expected, which is why I'm so perplexed by silverworm having UMTS 850/1900 available.

Black93300ZX said:
That's what I expected, which is why I'm so perplexed by silverworm having UMTS 850/1900 available.
Click to expand...
Click to collapse
That's just what the setting says ... the last part of it (GSM 850+1900) is what gets used.
DrSilvermorm, you might want to try flashing the 1.93 ROM with the .05 radio. It'll only take you 15 minutes, instead of hours for the store. I went from 1-2 bars to 4 bars in some areas with the radio update, and my connection is more stable than it was in 1.37.

GeckoDev said:
That's just what the setting says ... the last part of it (GSM 850+1900) is what gets used.
DrSilvermorm, you might want to try flashing the 1.93 ROM with the .05 radio. It'll only take you 15 minutes, instead of hours for the store. I went from 1-2 bars to 4 bars in some areas with the radio update, and my connection is more stable than it was in 1.37.
Click to expand...
Click to collapse
Umm, no, a setting doesn't "just say" UMTS 850/1900... The Diamond has been advertised with the new 850mhz GSM band, but everywhere it says it only has 900/2100mhz UMTS band. For there to be a setting for 850/1900 contradicts everything we've seen about the Diamond.

Black93300ZX said:
Umm, no, a setting doesn't "just say" UMTS 850/1900... The Diamond has been advertised with the new 850mhz GSM band, but everywhere it says it only has 900/2100mhz UMTS band. For there to be a setting for 850/1900 contradicts everything we've seen about the Diamond.
Click to expand...
Click to collapse
It was discovered a couple weeks ago that the Diamond is actually quad band, and that the original ROMs had simply locked the 850 band (for reasons only known to HTC). The first hint of this was the release of the 1.93 Hong Kong ROM: http://forum.xda-developers.com/showthread.php?t=410720
The setting for GSM 850+1900 does in fact work.

Well, it only said this in my settings, I wasn't actually getting UMTS or GSM, for that matter. I went to the ATT store today and they were very impressed to see my Diamond the employee ran to the back to show his manager. I told them about my dilemma and they said that in Cincinnati (where I live), ATT runs exclusively on the 850 band.
I figured, duh, all I need to do is flash my ROM like so many of us have done to enable 850. I shouldn't have expected it to work, depsite what it says in my phone's settings, because I have yet to flash my ROM at all.
However, I am totally new to Windows Mobile and flashing ROM presents an even bigger challenge to me. All this talk about hardSPLs and cooked ROMS and .NET frameworks has gotten me very confused. I couldn't even get Windows Mobile Device Manager to install properly last week when I was on T-Mobile and trying to install some emulators, so naturally, I'm very frustrated . I'm very tempted to just sell my Diamond and go get an iPhone 3G, but I think I still have not lost hope yet.
Is there a comprehensive, step-by-step guide for flashing my ROM to a 850-enabled version with vista that anyone could point me to? This would be very very much appreciated! I don't want my $700 investment to go to waste so soon.
Edit: After using the excellent "search" feature of these forums (sorry forum veterans) I have found I promising guide that I will employ shortly, found here: http://forum.xda-developers.com/showthread.php?t=406968. I will let you know of the results when I am done. I think I am going to try to flash to the ROM that GeckoDev recommended, if I can find it. Thanks friends!

GeckoDev said:
It was discovered a couple weeks ago that the Diamond is actually quad band, and that the original ROMs had simply locked the 850 band (for reasons only known to HTC). The first hint of this was the release of the 1.93 Hong Kong ROM: http://forum.xda-developers.com/showthread.php?t=410720
The setting for GSM 850+1900 does in fact work.
Click to expand...
Click to collapse
That's NOT my question! I'm 100% aware the ROM has unlocked 850mhz GSM, we've been over this a million times. But 850/1900mhz UMTS is for 3G, and I've never seen a Diamond working with 3G in the states. THAT's what I'm asking about, the GSM bands have never been a question.

Well Silverworm, good luck. If this is the site you found in that thread, this is the one I've checked out when learning how to flash ROMs.
http://modmydiamond.info/

Black93300ZX said:
Well Silverworm, good luck. If this is the site you found in that thread, this is the one I've checked out when learning how to flash ROMs.
http://modmydiamond.info/
Click to expand...
Click to collapse
Yup, that's the one, thank you. So far though I haven't been able to get past the Hard SPL step though. Every time I run the ROMUpdateUtility all I manage to do is soft-reset my phone and get ERROR: 260 CONNECTION on the utility. I can't get past 0% on the update utility, and it tells me I should check to see if it's plugged in. It is indeed plugged in, directly to my laptop, and not to my USB hub. It is even able to tell me what my current ROM is, so I don't see how it can question whether or not the Diamond is plugged in. What am I doing wrong?
I establish ActiveSync everytime I plug my Diamond into my laptop, but there was one note in the how-to guide that was peculiar to me: *Make sure the activesync icon is be green (finished synchronizing). On my windows vista business OS, I don't see an activesync icon in my system tray, even though I establish activesync everytime I plug in my Diamond. Is this part of the problem? If so, what should I do?
I've tried both Olipro's 1.20 and Des's CrashProof SPL. Both had the same problem. Also, I couldn't successfully enter the bootloader to check my SPL. The guide said to press the power, camera, and reset buttons at once, but there is no camera button to my knowledge. I searched on the forums and somewhere else I read that you just need to press volume down and reset, but for the few times I tried this this just soft-reset my Diamond...
As for your question about why it has 850 UMTS as an option as my settings, I have no idea, and I am sure it will not work because I can't even get the regular 850 band working. But this is what it says. If you really like, I can post a picture.

I tried searching in the forums, but I can't find anyone with my same problem. If this has already been resolved, a link would be very much appreciated.
I'm still having the same problem everytime I try to run ROMupdateutility -- all it does is reset my phone, then tells me error 260 -- that my phone is not connected, and that I should check the USB. Why does my phone keep resetting?
Again, I am using Windows Vista Business 32 bit, and the phone is plugged in directly through the laptop. Please please help, I really do not want to sell my phone, if I can help it.

DrSilverworm said:
I tried searching in the forums, but I can't find anyone with my same problem. If this has already been resolved, a link would be very much appreciated.
I'm still having the same problem everytime I try to run ROMupdateutility -- all it does is reset my phone, then tells me error 260 -- that my phone is not connected, and that I should check the USB. Why does my phone keep resetting?
Again, I am using Windows Vista Business 32 bit, and the phone is plugged in directly through the laptop. Please please help, I really do not want to sell my phone, if I can help it.
Click to expand...
Click to collapse
I had a problem like this with vista. I went to start-> settings-> connections-> usb to pc (on the phone) and unchecked 'enable advanced network functionality'. Unplugged the usb cable and plugged it back in, worked like a charm.

RavenGirl said:
I had a problem like this with vista. I went to start-> settings-> connections-> usb to pc (on the phone) and unchecked 'enable advanced network functionality'. Unplugged the usb cable and plugged it back in, worked like a charm.
Click to expand...
Click to collapse
I tried this, and it still just soft-resets. Thank you very much for the suggestion, though. Any other ideas?
Also still having trouble running the bootloader, how do I do this? Is it a crucial step, or only necessary for checking which SPL I have?

help! phone isn't working properly :(

Hi all, had my Kaiser a while now and have been using a few different ROMs in this time which have all worked great! The last ROM I used was HyperDragon III. It worked fine for a few days, then started playing up massively. It intermittantly works - Some times I won't receive anything for 3-4 hours, then receive loads of texts and missed calls at once.
T-mobile checked the network, etc. and everything was fine. Re-flashed it back to the original ROM from on here (T-Mobile UK) and it's still playing up the same!
When I put my SIM in a different phone, it works perfectly.
What else can I do/try? I *think* I flashed back to the right radio too but not 100% sure. How do I check what radio/rom versions are currently on the phone?
Thanks!

Radio version can be found @ bootup R: , remeber that the recomended radio may not apply to you as there region specific, so the best bet is to look @ people sigs in your area and see what radio they are using?
Your in the UK try 1.70.19.09 on cooked ROM it's what i always use

R:1.27.15.32
G 22.51.88.13h
D 156.00.00
That's what I got on startup.
For some reason too, when I restart the phone, before it comes to that screen it shows the Hyper Dragon screen first!
I'll try a different radio and ROM then I'm worried it's not a fault with the actual phone..

never mind, advice already given

Well I've upgraded to 1.70.19.09 Radio and Anryl Ultimate Release 3.
Phone seems alright after 20 minutes, but it'll need a few days of testing.
It's not looking good so far - I've just soft-reset my phone and it set the time back to 13:32.. Which certainly isn't the time! It was doing this before when it wasn't working properly too.
This ROM seems incredibly buggy too! Opera keeps closing itself, as well as a few other programs.. randomly!
Help please! I'm frustrated.

jamiepyrite said:
Well I've upgraded to 1.70.19.09 Radio and Anryl Ultimate Release 3.
Phone seems alright after 20 minutes, but it'll need a few days of testing.
It's not looking good so far - I've just soft-reset my phone and it set the time back to 13:32.. Which certainly isn't the time! It was doing this before when it wasn't working properly too.
This ROM seems incredibly buggy too! Opera keeps closing itself, as well as a few other programs.. randomly!
Help please! I'm frustrated.
Click to expand...
Click to collapse
Some times if you don't do a hard reset right after flashing successfully, before the phone set up, things will act buggy. Make sure you do the hard reset.

jamiepyrite said:
Well I've upgraded to 1.70.19.09 Radio and Anryl Ultimate Release 3.
Phone seems alright after 20 minutes, but it'll need a few days of testing.
It's not looking good so far - I've just soft-reset my phone and it set the time back to 13:32.. Which certainly isn't the time! It was doing this before when it wasn't working properly too.
This ROM seems incredibly buggy too! Opera keeps closing itself, as well as a few other programs.. randomly!
Help please! I'm frustrated.
Click to expand...
Click to collapse
This should do the trick. I think the recent Hyperdragon Roms are WM6.1 and the radio you had listed is for WM6.0. This can cause all sorts of hangs/volume problems etc. Also check which SPL version you have - A WM6.0 SPL can also cause hangs etc if used on a WM6.1 rom.
EDIT: sorry, only read the radio bit of the fix.
Make sure you get rom/radio and SPL all matched ie WM6.0 or WM6,1. Most of the latest roms are WM6.1. If you find Anryls rom buggy, just try another one - I love the Garmin series.

Thanks for the advice How would I check which SPL I'm on?
Unfortunately I've hard reset it with Anryl and still running terribly. Lost the network this morning too so I received a text a few hours late.
I think I'm just going to go with a ROM that's as lite as possible now!

Sorted - I've upgraded to Hard SPL 3.28 and I'll flash the ROM to something lighter. Thanks guys

It appears to be working fine except I'm still having the problem of it changing the time!
Just checked the phone and it's saying 16:50.. Although half an hour ago it read the correct time. Any ideas?
I'm using Galarm 1.4 if it makes a difference. Running Athine Lite now.

Sorry everyone - Phone still isn't working properly. On the correct SPL, correct radio and correct ROM.. done a hard reset.. And it still just keeps losing network! Think my phone might be broken in some way?
I *assume* it's under warranty.. I got it under a year ago, but got it due to an insurance claim of my Hermes, they replaced it with a Kaiser.
When I phoned T-Mobile, they said although I got it from the t-mobile store, I'd need to speak to my Insurance company.
BUT I'd need to put it back to standard for Warranty purposes! I've no idea what I'd need to go back to..
thanks everyone

bump - anyone?

jamiepyrite said:
BUT I'd need to put it back to standard for Warranty purposes! I've no idea what I'd need to go back to..
thanks everyone
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs